Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
These steel backing plates for the 8' E-track in your enclosed trailer provide more support than just securing it with using wood or metal screws. Bolt each plate to your E-track on the opposite side of the wall or under the floor.
Features:
Specs:
Note: The included hardware lets you mount your E-track on surfaces up to 2" thick.
These backing plates provide more support for your E-track (sold separately) than only using wood or metal screws. Simply put, they allow the pulling force to be distributed over a greater area. This prevents your mower, ATV, or other heavy object from pulling your E-track away from its mounting surface and tearing up your trailer's wall or floor. They're perfect for trailers with thin walls or floors.
Pre-drilled holes accommodate the standard 4-bolt mounting pattern found on most horizontal or vertical E-tracks. There are also holes to accommodate D-rings, Snap-Locs, and odd-shaped tie-down anchors.
To install, drill pilot holes in your mounting surface as close as you can to each end of your E-track and directly in the middle so that the plates will be evenly spaced. Place your E-track where you're mounting it and insert the included bolts. On the opposite side of your wall or floor, place the plates over the bolts and secure them using the included washers and nylon lock nuts.
Average Customer Rating: 4.9 out of 5 stars (203 Customer Reviews)
These steel backing plates for the 8' E-track in your enclosed trailer provide more support than just securing it with using wood or metal screws. Bolt each plate to your E-track on the opposite side of the wall or under the floor.
They work very well. I have had them installed for a year and am still very pleased with their fit, function, and ability to provide me with a sense of security about the e-tracks in my utility trailer while hauling my motorcycle. I used 3 per 5-foot section and feel much more confident than just screws.
Worked out great, I have a wood floor on trailer, so I installed the backing plates too. The machine don’t move an inch ! Nice product!!
These backing plates are an excellent addition for securing etracks to a wood floor. In my case my trailer. They are thicker than expected, the mounting hole arrangement gives flexibility in mounting, and the hardware is a perfect match for etracks. All of this makes installing etracks easier with the confidence your load will be secure. I’ll buy again.
Raymond
4/23/2024
I think they are a must have for etracks on utility trailers. I use mine to secure my golf cart and mower and they prevent any mount hardware issues. Without doubt I would buy these again.
The backing plates from eTrailer have worked out perfectly for attaching E-track to the load floor of our cargo trailer, which allows cargo to be immobilized for travel. After 1 year's use, there have been no problems with the E-track or the backing plates, and I tie down my Honda scooter very tightly when hauling it.
Shipped as described, worked great for my trailer. Does the job I intended it to do.
These backing plates were just what I needed to secure Etrack moveable tie-downs to the floor of our new cargo trailer. On "normal" camping outings, they secure my 300-lb. Honda motor scooter, my 200-lb. handicap scooter, & our 75-lb. ice chest to the floor of the trailer, and they and the E-track attached to the inside walls of the trailer have been used to secure various other loads that we have needed to haul. They have now worked well for a year with absolutely no problems.
Works great! A big time saver and more peace of mind knowing it’s strapped down securely!
Kirk
8/13/2024
works great! i can load and unload very easily
Good product, but once again (as is the case with most of my orders) your shipping department blew it and didn't pack the order very well. There was ZERO packing material inside the box, so the items blew out the side of the box.
I'm seriously getting tired of complaining about your bad packing jobs, but I keep doing so because no one has fixed the problem yet.
Jenny N.
9/6/2023
To be honest we are always working on packaging solutions and sometimes the results are less than ideal. I will have our Customer Service department reach out to you and share the review with the shipping department.
These E-tracks installed relatively easily on my new trailer using the available backing plates. Total install of 18' of track took less than 4 hours - a one man job except for the final tightening of the bolts included in the backing plate kit.
Surprisingly sturdy and they hold e-track securely. A must have when installing if you value whatever it is you’re hauling.
Makes the E-track in our trailer to tie down our side-by-side sturdy without drilling or screwing into the frame rails.
Shipping was very fast even recieved before date due to arrive.Plates worked well with my DC Cargo vertical etracks. Good quality and was easy to install . Definitely would recommend when using on trailer deck or flooring that is 1/2 -5/8 thick .
As usual my Etrailer order was spot on. Delivery was quick and the backing plates and E-tracks were high quality. You can buy from Etrailer with confidence. Their products are always as advertised and the customer service is excellent.
Cesar
8/22/2022
The product is still performing flawlessly, great purchase.
Excellent quality! Compared to the other guys. The plates have a lot more options. The hardware is better quality, the washers fit better, it comes with lock nuts. Just better quality all around.
All the parts work as advertised, great ..
Scott
8/21/2023
Good nice backing plates for e tract,used them for other things to.
Works great. Easy install. Highly recom mended
Exactly what we needed for our etrack system. Great price and fast delivery!
Used these plates and the included hardware as a backer to the (Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks - 1,500 lbs - 4 Wheel Set) Item #EM98CV. They are too small to accommodate all 6 screw holes, but still worked out perfectly for me. I was able to get 4 of the 6 bolts through the plate by drilling 2 new holes before installation.
Excellent service. Order was seemless and showed up at my house a few days later. Will order from etrailer again!
David
12/4/2022
Product is still like brand new. Works great! I hit a deer while hauling my trailer with my side x side in it and my side x side never moved. The tires on the side x side were strapped to the etrack on the floor of the trailer. This back plate holds the etrack down to the floor and performed flawlessly.
Easy to order, arrived earlier then expected. Up to date shipping info.
Highly recommend for mounting on wood bed. Just extra security.
A good versatile product,but my application the bolts were too short. A quick trip to hardware store ,everything good
Everything is well made. As you know , I have ordered e track and a whole lot of backing plates to make my installation well built. Prices are good. The steel of the etrack seems to be very strong. Thanks.
Worked perfectly. Easy to install.
Received the order promptly and the backing plates and hardware were very good quality. I will definitely order from etrailer again.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Michael
4/7/2024
Solid, and durable. Appear to be holding up well after a year.