To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Custom bezel with built-in night vision camera mounts behind your third brake light. Line up your fifth wheel or gooseneck trailer using the integrated 4.3" color screen on the rear view mirror.
Features:
Specs:
The rear assist lines generated by the system's camera make connecting your fifth wheel camper or gooseneck trailer a one-person job. The lines appear on the included 4.3" rear view mirror monitor and show the distance from other objects, allowing you to accurately line up your connection point when hooking up your camper or trailer.
0 Lux night vision produces a quality picture and gives you the flexibility you need when hooking up your camper or trailer. You can line up your connection point in low-light conditions at dusk, or in complete darkness at night without the aid of IR transmitters.
The rear view mirror monitor replaces your existing rear view mirror, giving you the same functionality while adding a dynamic 4.3" full-color, LCD screen to view the cargo area of your truck. This dual-action mirror monitor is the perfect tool for safely connecting your fifth wheel camper or gooseneck trailer, allowing you to see your truck bed and camper at the same time.
Simply unscrew and unplug your factory third brake light. Once removed, set your new custom bezel with camera in place. Feed the 6' camera wire through the opening into your truck and re-install your factory third brake light in front of the custom bezel.
Connect your 6' camera wire to the 18' wiring harness. This combined 24" wire will extend through your head liner or door sill panel along the edge of the floor, up to the front of your truck, and connect with the included ground and power wiring harness. The power wire will run to your truck's battery.
Average Customer Rating: 3.3 out of 5 stars (8 Customer Reviews)
Custom bezel with built-in night vision camera mounts behind your third brake light. Line up your fifth wheel or gooseneck trailer using the integrated 4.3" color screen on the rear view mirror.
Sales experience was seamless, product was installed professionally on a public safety vehicle and there has been no negative feedback reference the rearview camera.
I would have given this a higher score if it were not for the lack of decent instructions or how the mirror actually works, Secondly, I don't like the fuse placement on the mirror, I will splice it out and add it somewhere else that is accessible. I do like the fact you can connect 3 cameras, again, no instructions how the mirror switches between the two. After testing, when a camera is powered, the screen show that particular camera. I will be adding the cargo cam and an additional front cam to my aux switches so I have control over them. Also, the cargo cam is 620 lines, as advertised but no specs on the mirror monitor. After receiving the item, the mirror only produces 480 lines. Not deal breaker as the picture quality is good for a 4.3" screen.
Haven't installed yet, but did bench test on the cargo cam as well as an additional cam I purchased. Works flawlessly.
Overall, not a bad product, just need some more info/instructions and options for the mirror fuse.
The directions are poor at best. You have to figure it out on your own, which isn't a real big problem, but some additional information would be nice. The bezel for the camera is nice, but doesn't fit 100%. Its close enough, but you have to play with it a little.
Additionally, I'm not sure why the camera has a 6' cable, then there is a REQUIRED 24' cable to then connect to another 6' cable to the mirror. I'm wanting to install the mirror in my truck, not the truck in front of me. I don't need 36' of cable, its a Crew Cab, not a buss. So it means you have ALOT of cable to stash.
Also, other than changing the brightness, I have no idea what the POWER button on the mirror does. I wired to a switched power source figuring I could just press the power button to turn the monitor on and off. Guess what.. you can't. It is ON. To have this work right, you'd have to figure out a way to wire it to the reverse light switch.
And once you find this issue (despite the item description clearly stating the power button can be used to turn it on and off), good luck getting help from etrailer. Was told I would be contacted by someone from technical support days ago... its been crickets.
It also sucks the mirror is autodiming, despite what looks like light sensors front and rear, it does not dim (only found that mentioned in the two page "manual/install guide".
The quality of the parts seem good but the directions to install everything were horrible (essentially none existent) and I had to go to [online] to figure out how to remove my factory mirror for the new mirror install and the wiring I figured out by trial and error. The camera kit should have included longer screws to replace the stock screws on the F250 brake light. The order was delayed about a month due to supply chain shortages. Once I got got it all together it works well, just disappointed in the instructions and should have provided replacement screws.
Image only covers 1/2 the mirror & is too small to see any details
Hard to see in bright sun other than that easy to install
Do you have a question about this Backup Camera?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.