bing tracking image
  1. Backup Camera
  2. Rear View Safety
  3. Backup Camera Systems
  4. Hardwired
  5. 7 Inch Display
  6. Dash Monitor
Rear View Safety Backup Camera System

Rear View Safety Backup Camera System

Item # RVS-770613-NM
Our Price: $317.99
Backup Camera
Shipping Weight: 6 lbs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
1-800-940-8924 to order Rear View Safety backup camera part number RVS-770613-NM or order online at Free expert support on all Rear View Safety products. Great prices and Fastest Shipping for Rear View Safety Backup Camera System. Backup Camera reviews from real customers.
  • All Info
  • Reviews (7)
  • Q & A (0)
  • Videos (2)
  • Photos

Rear View Safety Backup Camera - RVS-770613-NM

  • Backup Camera Systems
  • Hardwired
  • 7 Inch Display
  • Dash Monitor
  • Standard Camera System
  • Rear View Safety
  • 130 Degrees

  • Rear View Safety backup camera system
  • 7" Digital TFT LCD color monitor
    • Distance grid lines
    • Mirror image capability
    • 3-Port power harness for DVD player or other cameras
    • Automatic system switch
  • Color CCD backup camera
    • 130-Degree viewing angle
    • 50' Infrared night vision
    • IP68 Rated - keeps out dirt and moisture
    • 20G Vibration rating
    • 100G Impact rating
  • Includes all wires, connectors, and mounts
  • 1-Year warranty

RVS-770613-NM Rear View Safety Backup Camera System

Installation Details RVS-770613-NM Installation instructions

Video of Rear View Safety Backup Camera System

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for RVS Rear View Safety Backup Camera System Review

Hi there, RVers. Today we're going to be taking a look at RVS' rear view safety backup system. These are available in different configurations up to four cameras. We've currently got the four camera system installed on our RV. The four camera system comes with a front, a rear, and two side cameras. Here at the back we've got our two rear cameras.

Now, the system is designed for one of these to go on the front, but you can mount the front camera wherever you really like. My friend Tom's dad mounts his over the door of his RV so he can watch his camp site and use it as a security camera.Right now you're looking at the one we've set up low at the back of our vehicle to make it easy when backing up for hooking up this flat tow setup. When we toggle to the next camera, we've now got our high mounted rear camera that'll allow you to see your entire flat tow setup pulling behind you. This is also nice for pulling a trailer and you want to monitor your cargo in the back. We also have a left and right side camera system, which makes it easy when parking and backing up where you need to see down the side of your RV.If we continue to toggle through, we'll have multiple display modes up.

Here, we have both of the cameras we have installed in the rear. Here, we have both of our side cameras. You've got a three camera set up here with the rear and both the sides, and a four channel setup, where you have both the sides. And we have two rears here, but it could be your front and rear.It's just another layout with all four cameras, and we've circled back around to our first camera, which is our low rear camera. These display options will vary depending on how many cameras you have.

The monitor system will accept up to four.This is our side camera on our driver's side. All of the cameras feature infrared lights to assist its vision in low light settings. The nice thing about the front rear cameras is they come with a sun shade to assist its vision in high light settings, and the brackets that come included with those will allow the camera to swivel both up and down. The screws on the side can be loosened and tightened to allow you to make that adjustment.Here's our passenger side camera. All the cameras that come included with the kit are going to be vibration and impact resistant.

Your side cameras will have two mounting options. You'll have the adhesive backing that we chose to install on ours, which gives it a nice flush mount, which gives it a real good factory look. There are also a bracket set up that you can install on these. It will have it stick out about an inch when the brackets installed, but what's nice about the brackets is that the cameras will be adjustable so you can tweak those to the best vision option that works for your RV.Three out of the four cameras that you can hook up to the monitor system will have trigger wires available. These trigger wires, when 12 volts as applied to them, will turn on that specific camera. So on our system here, we hooked our side cameras up to our front blinkers, so that way whenever I turn the blinker on, that 12 volt signal from the blinker is sent to our system and it turns those on. We also have one hooked up to our reverse lights for the rear camera. Here, you can see it activating as I turn my blinkers on.There's a slight delay when you turn the blinker off before it returns to the normal position, which is usually your front camera or camera one. And here's our left. As long as the blinker remains active, this camera will stay on. Same goes for reverse.Now, when you put your vehicle in reverse, it automatically switches to your reverse camera. Here, you would see it on. When it gets this trigger signal, that will inaudible 00:03:33 switch to that camera. inaudible 00:03:34 grid lines up, making it easy to back into a parking space. And it also turns on the audio circuit. You're hearing me through the camera system right now. This is nice if you've got anybody in the back guiding you into your spot. You'll be able to hear the directions.This camera system's not only great for increasing your confidence and safety as you're driving down the road by providing you with vision all around your RV. It also is great for a security system, so when you get to your destination, you can monitor your camp site and your belongings, in the event that any animals may come along to try and get some food, or you have any unwanted guests that want to troll into your camp site.The menu button next to the power button will pull up the menu where you can adjust all the display output options on your camera here. This is going to vary between picture quality, brightness, as well as which cameras are currently being displayed. In the bottom right, you can also reverse the camera. This gives you a few more mounting options. If the location that you want to mount it works best with the camera upside down, go ahead and place it upside down and then press the reverse button. Through the menu on the turn option, you can adjust it so that specific camera displays upside down all the time, which would be right side up for you.The unit also comes with a remote. This is nice if you're using it as a security system. I can be sitting here at the table, just inaudible 00:04:54 look around outside. We can cycle through all of our cameras and see that everything here at the site is a-okay.When comparing this other camera systems on our website such as the ones from Voyager, I found that the RVS system has a better audio quality coming out of it in comparison. However, I found that the Voyager has a little bit crisper picture. So if picture quality is better for you, then the Voyager might be a better option, but if you really are having trouble hearing the people behind you and you want those directions, the RVS system that we have here is probably a better option.Another difference between them is that the RVS cameras use a five wire connector, where the Voyager systems use a four pin connector. The four pin connector, I've found, is a little more common and is often pre-installed on many RVs, even if they don't have a camera system. So installing a Voyager system is often a little bit easier if the wiring is already run to the back, because routing the wiring can be some of the most time consuming parts. So if you can use the wire that already exists in the RV, it greatly decreases the amount of time for the installation.You'll want to begin your installation by determining what you already have on your RV. Some systems already have cameras mounted in the back, and may already have cameras mounted at the side, and they may already have camera wiring run through them.Once you determine what you have, then you'll want to determine where you want to put the cameras that come in your kit. We're going to be placing two cameras at the back. This kit's typically designed for one of those to go on the front, but our customer requested the other to be in the rear. And we're going to be mounting both the side cameras. There was already wiring ran for our camera through the back. There is wiring that comes in your kit if you don't have a wire that's already run.If you need to route your wiring, you're going to run that from your monitor to wherever you've mounted your camera. When routing your wiring, it's best to avoid any moving objects, such as your steering and suspension, and anything excessively hot, such as your exhaust. In a lot of cases, running it down and then underneath the vehicle back up and then inside is the easiest way to do it.For your front and rear cameras, you'll have a bracket that you'll need to mount. We're going to be mounting the rear. We're going to use the hardware that already existed on our RV. There is some hardware that comes with it, but depending on where you want to mount your camera, you may need to pick a more appropriate hardware for that application, whether that be wood screws or nut and bolts that are different sizes than what comes in your kit.We're going to mount the bracket by sliding our screws through the slotted holes on each side here in the back. And using a Phillips screwdriver for this hardware to tighten it down.Next, we're going to mount our camera into our mount there. It's not a bad idea, if you're mounting it up high on the back of the RV like we are here, to go ahead and, connect the electrical wire now. This way, just in case you drop it, it's not going to go all the way to the ground. So just line up. There's a couple little slots on each end. Line those up, so it only goes together one way. Go ahead and screw the locking nut together and then you can take the rubber protective covering and slide it over both.Now, it's optional, but there is a sun shield that comes with it. If you decide to use it, you simply just slide this over your bracket. I like to slide it on first. It's going to be held on by the same hardware that holds on the camera. I just find it a little easier to put that in place because it does a pretty good job of staying there. We'll now take our camera. We're going to line up the holes in the side, you have three holes on each side, with the hole in the center of our bracket, and the slots. We're going to start by doing the center hole to the center hole on the camera.Once you've got the bolt the center ones on on each side, and you can angle the camera to your desired position and then use the remaining hardware to put one on each side of that center one, locking it in place. You'll do that on each side of the camera. We can now push our wiring back up inside the motor home to hide it. We mounted our camera where cameras are typically mounted in the back, and a lot of RVs already have a location here to put one if they don't already have a camera, just like this vehicle did. But if you we're installing it in a place where there was no spot for it, you can drill a hole for your wiring, and I would recommend using an 11 16ths drill bit to make it large enough to fit your wiring and connector ends through there. That also happens to be a good size for the grommet that comes in the kit to poke up in there and seal up the hole you just drilled.To help get your grommet in place, you might need a small screwdriver to just poke the lip edge up in the hole as it is kind of a tight fit, but this is what we want, so that way it's a water-tight seal. We mounted our front camera here at the rear. Our customer wanted to use this as a closer camera towards this hitch. Hooking up this hitch mounted accessories and also backing up, hook this vehicle up for his flat tow setup.Your side cameras, so they're going to mount in a similar way. You do have brackets that will allow adjustment just like your rear and front cameras, but it also comes with a double sided adhesive pad that you can use. That's what we chose to use here, as it gives it a nice flush mount and it's just a little bit more appealing to the eyes using the flush mount.Once you've got all your cameras mounted and you've routed all your wiring up to the front of the vehicle, we now need to get our monitoring system hooked up. There's a harness that comes with your monitor and we're going to start hooking that up. The end with all the wires poking out of it that you see here, it's going to have all of your camera connections here, so if you routed your wiring inside, you can go ahead and connect all of your cameras to it. Those connect just like the ones in the back. And after you've connected them, you can cover them up with the rubber sleeve.You'll have a brown, a blue and a yellow wire that comes off of your harness. These are your trigger wires for your cameras. Your trigger wires will look for a 12 volt input, and when it sees one, it will automatically turn on the camera for that specific trigger wire. So you can see here this one's labeled channel four, channel three, and channel two.Channel one is supposed to be for your front camera. Channel two is designed to be your rear camera. Channel three is designed to be your left side camera, and channel four is designed to be your right side camera. So we've hooked channels three and four to our blinkers, channel three to the left front turn signal, and channel four to the right front turn signal. We just spliced right off of the bulbs for the turn signals, in order to get that 12 volt. So whenever we turn our blinker on, that blinker signal that's going to the bulb, making the bulb light up, is going here in flashing. Our system will detect that flashing and know, oh, that's your left turn, and it will automatically turn on the camera when it sees that left turn signal input.Same thing with our channel two. We hooked this to the reverse light circuit and brought it up here. So whenever we pull our vehicle in reverse, the 12 volts that was going to our reverse light is also going to our camera system. Once it sees the signal, it turns on the backup camera. You'll also then have a black and red wire that comes off this harness. Your black wire is ground, and you could hook this to any ground point. We went ahead and just used a ground stud located back behind our brake pedal. This will vary depending on your motor home, where you decide to mount it.And lastly, we have power. There's a couple of different ways you hook up power. You could hook it directly to the battery and that would power your camera system all the time. If you do have it hooked up to your battery all the time, you can turn the monitor off to save battery life, but there is still LEDs on it that will be lit up for the buttons, and over a long period of time, those could drain the battery.So what I've opted to do, instead of hooking it directly to the battery, we used a fuse tap to tap into a fuse that's only powered when the ignition's in the run position. This way the camera system turns on when you turn the key on. So if you are not planning to use it as a security system and you want to make sure that it's not going to drain your battery so you don't have to worry about it ever, this is a good option. You can pick up fuse taps here at the front camera, there is no trigger wire. If you want to select the front camera, you do so using the buttons on the monitor. Now, you can see here we've got a lot of extra wire. Depending on the length of your motor home, you may have a lot of wire like this too. This is a shorter motor home, so the excessive length that you get here, we can just bundle up and zip tie out of the way. I do however really like that you get so much cable length. This camera system will work with just about all RVs out there without needing additional extensions. Some of your longest ones may require them, but for your average and slightly larger sized ones, there'll be plenty here. So we're just going to take this and we're going to shove it under the dash and zip tie it up out of the way.Then pick out a location to mount your monitor. We've decided to put ours on the dash, a little bit on the passenger side, but close to center. And we've angled it towards the driver. It's a pretty large monitor, so placing it in the center and on the driver's side will likely obstruct the driver's view, so I do highly recommend putting it off towards the passenger side of it.There's a couple of different mounting brackets that you'll receive, to choose some different locations to mount ours. We used the dash mount, which has a double sided adhesive underneath, and there are a couple of holes in it where you can run some self-tapping screws down to further secure it to your dash.The other option you'll get is a wall or ceiling mount that you can put and be able to pivot and rotate it. This is nice if you've got the extra room so you don't have to worry about obstructing your windshield. However, on our particular RV here, there really just wasn't a good location. This kind of puts it a little too far back, makes it hard to see for the driver. You can't really go off to one side because it will interfere with our visors. But it is a good option if you do have the space.The only thing left to do is test it out. We've gone ahead and turned our key on. The system automatically powered up due to how we have it run. You can see here, we're currently looking at, this would be our front camera, but this, on our vehicle, is our lower rear mounted camera. You can cycle through the cameras with the button here, so you just want to make sure they all work. This is our backup camera, the high mounted one. We have our left and right side mount cameras as well.You can also watch multiple monitors at the same time when cycling through. Next, we'll test out our trigger wires. You'll want to try both your blinkers in reverse and make sure you've got those signals. As you can see here, whenever I flick the blinker switch, it switches to each side. And when we put it in reverse, we'll get our backup camera.And that completes our look at RVS' rear view safety backup system.

Customer Satisfaction Score:

Customer Reviews

Rear View Safety Backup Camera System - RVS-770613-NM

Average Customer Rating:  4.9 out of 5 stars   (7 Customer Reviews)


Exactly what I needed for our venerable 2003 Jayco travel trailer. 3D printed a very neat unit that holds the display and fits into a “sunglasses pocket” on the top of the dashboard of our Chevy Colorado pickup.


Great system, installed this for one of my customers


superior upgrade for us. would have been 5 star but the installation and usage instructions are almost worthless. 8^)


Finally got monitor install hook camera up this a good outfit work good thanks Tom for knowledge and service you provide thanks


Quick shipping, easy order process, ordered the same product from another vendor who promised next day delivery and did not hold up to their end. Do not order from Truckid or Carid. Product fits perfectly in Isuzu. Will order again.




See what our Experts say about this Rear View Safety Backup Camera

  • How to Install the Rear View Safety Backup Camera System
    Although we may not have an installation video for your exact vehicle, you can follow the attached installation video for when we installed the Rear View Safety Backup Camera System # RVS-770613-NM on a 2011 Ford Van. The installation process basically involves you choosing where you would like the camera and monitor mounted and then running the cables in a desired location from one to the other. A 0.8 inch hole will need to be drill through any walls in the way, and a split grommet used...
    view full answer...
  • Where is Fuse of Rear View Safety Backup Camera System # RVS-770613-NM
    The fuse of the Rear View Safety Backup Camera System # RVS-770613-NM would not have a model specific location on your 2014 Forest River Georgetown 270SSF. You would just have to trace the wiring that runs to the monitor till you find it. It will be in a red fuse holder.
    view full answer...
  • Replacement Rear View Backup Camera System For 2015 Itasca Navion
    We have a rear view system you can install in your 2015 Itasca but we do not offer just a camera that can be used to replace the camera you currently have installed. The system we offer that can replace your system is part # RVS-770613-NM. This system includes a camera that has 130-degree viewing angle and 50-ft of infrared night vision. The 7-inch color monitor is included along with all wiring, connectors and mounts.
    view full answer...
  • Can I Use the Rear View Safety Backup Camera System on a 2008 Gulfstream Touring 5291 Class B+
    Yes. The Rear View Safety Backup Camera System # RVS-770613-NM is designed to work as a universal application camera system, so it will work on just about anything with wheels. This system comes with a really nice 7" color monitor that will make it easy to keep tabs on what's going on behind your 2008 Gulfstream Touring 5291 Class B+ RV. I've linked a review video of this system that you might also find helpful if you haven't checked it out already.
    view full answer...
  • Can A Hardwired Backup Camera System Be Installed On A 5th Wheel Trailer
    The Rear View Safety Backup Camera System # RVS-770613-NM can definitely be used on a 5th wheel. However, as this is a hardwired system, it is going to be a challenge getting everything wired up and will require a lot of customization to get it all to work.
    view full answer...
  • Is Rear View Safety Backup Camera System For Motorhome a Good Choice
    It is a good choice for your motorhome, and you can get the Rear View Safety camera system without the trailer/tow kit; what you need is the following: - Rear View Safety Backup Camera System # RVS-770613-NM This has a wide 130-degree viewing angle so you can see more of what's behind you, and even infrared night vision so you'll be able to see clearly after the sun goes down.
    view full answer...
  • Rear View Camera Compatible with Factory Dash Monitor on a 2015 Ford F-350
    As long as the dash monitor on your 2015 Ford F-350 has ports for a set of RCA cables or one round 5 pin connector (see photo) to plug into, then the Rear View Safety Backup Camera part # RVS-771 will work with your factory dash monitor. If your dash monitor does not have RCA slots or a round pin port then the only other option we have for you would indeed be to install a monitor system and for that I recommend the Rear View Safety Backup Camera System part # RVS-770613-NM. I have attached...
    view full answer...
    Image 1 for
  • Rear View Camera Recommendation for 2011 Volkswagen Tiguan
    The Rear View Safety Backup Camera # RVS-771 that you referenced is a great solution for adding a back up camera to a vehicle that has a monitor setup already. The connections are standard RCA cables. Or for a kit that includes a monitor you'd want the part # RVS-770613-NM.
    view full answer...
  • Replacement 5-Pin Cable for RVS Camera System
    RVS offers a 49 foot replacement 5 pin female cable with the threaded retaining rings on both ends as part # RVS-885. This is longer than what you actually need, but is the only replacement cable of this type offered.
    view full answer...
  • Does the Rear View Safety Backup Camera System RVS-770613-NM Come with Reverse Sensors
    I do have an option for you but the Rear View Safety Backup Camera System part # RVS-770613-NM doesn't come with backup sensors. If you wanted to add these you'd need the Rear View Safety Backup Sensor System part # RVS-115 but it's not integrated into the Rear View Safety Backup Camera System, they are just two separate systems but they will still work well together. The other option is an entirely new system like the Rear View Safety Backup Camera System with Rear Sensors part # RVS-770613-112...
    view full answer...
  • How to Connect/Disconnect Rear View Safety Backup Camera System from a Travel Trailer
    If you are wanting to install the Rear View Safety Backup Camera System # RVS-770613-NM on a travel trailer then you also need the quick connect/disconnect kit # RVS-213-613. However, if you would like the option of adding additional cameras to your trailer in the future I recommend going with the kit # RVS-2133 instead which carries 3 signals as opposed to 1.
    view full answer...
  • Wired RV Backup Camera System to Replace OEM Setup on 2004 Winnebago Itasca
    I reviewed Winnebago documentation for 2004 model year motorhomes and some came with the option of a Jensen in-dash radio/rearview monitor system while others did have a Sony option. The best way to know what was installed on your specific RV is to check with Winnebago using the RV's individual VIN. I also checked forums and found comments from owners saying that the Sony system has been made obsolete and is unable to match up to new components, making a complete new camera system the better...
    view full answer...
    Image 1 for
  • Is Splice Kit Needed For View Safety Backup Camera System RVS-770613-NM
    You will not need to use the splice kit, but you will need to use new wiring in order to upgrade to and install the Rear View Camera system you asked about: - Rear View Safety Backup Camera System # RVS-770613-NM This camera system comes with its own 5-pin connectors, and the splice-in kit won't be something that will allow you to use your existing wiring, you will need to wire this up on its own. This is a really nice choice for a back-up camera and monitor due to its large 7 inch screen...
    view full answer...
  • Recommended Rearview Mirror Backup Camera for 2000 Chevrolet C-3500
    The K-Source Vision System Backup Camera w/ Rearview Mirror # KSVS-8 referenced in your question will work great in your 2000 Chevrolet C-3500 as long as you have a wedge mount style for the attachment point on your existing rearview mirror. This is the standard attachment style, but I have included an image that shows what this looks like so you can ensure that it is what you have in your truck. The rear camera on this unit will give you a good view for backing up with or hooking up your...
    view full answer...
    Image 1 for
  • Recommended Backup Camera For 2006 Hummer H3
    Even though the License plate on your 2006 Hummer H3 is on the driver side of your vehicle, the Hopkins Smart Hitch Backup Camera and Hitch Aligner System # HM50002 would still work though you would not be seeing perfectly behind you. For a system that will allow you to mount the camera directly in the center of your vehicle I recommend taking a look at the # RVS-770613-NM as the camera does not mount to your license plate and can be mounted wherever you need to get the camera lined up...
    view full answer...
  • Wired Rear View Camera System Recommendation for Rear of Travel Trailer
    To alleviate the possiblity of interference a wired camera setup will be your best option like you mentioned. For a single camera version of the kit you mentioned the Rear View Safety Camera kit part # RVS-770613-NM would be a great option. You'll also want the extension cable to use from the monitor to the rear of the vehicle like part # RVS-101N so that you can then have a quick disconnect when connecting or disconnecting your trailer. You can use any circuit you like as the trigger...
    view full answer...
  • Replacement RV Stereo and Backup Camera for 2000 Beaver Marquis Motorhome
    Both the Rear View Safety Backup Camera System # RVS-770613-NM and iRV RV Stereo # IRV64FR will work to replace your broken systems. The camera will be a fairly straightforward replacement, but for the stereo you will need a 6-11/16" wide x 3-15/16" tall x 6-11/16" deep cutout. I'm not sure what the cutout for your old Alpine is right now. If you can let me know I would be happy to see if there is a better fit available.
    view full answer...
  • Where Should the Rear Camera Be Placed On a Trailer At the Top
    The best location to install a camera on the back of the trailer is in place of the center marker light at the top. That said, removing the center light completely can be a violation of local state law. The best option we have with this in mind is the Furrion Vision S Wireless RV Observation Camera System part # FR98NR as the center camera is integrated in a mounting bracket which also houses the marker light. Furthermore, there are two traffic cameras which help reduce blind spots when...
    view full answer...
  • Can Wireless Backup Camera be Installed on Aluminum Trailer without Interference to Signal
    When mounting a wireless backup camera like the Voyager # ASA84YR to an aluminum trailer, there is the potential for interference. This is really the case with any trailer when using a wireless system, but the metal on your trailer might cause a bit more of an issue. In these cases, we have found that mounting the camera towards one side of the trailer and the monitor on the same side of the tow vehicle provides a much better signal strength to combat this potential interference. Otherwise,...
    view full answer...
  • Backup Camera System For a 2021 Ram 2500 With Tailgate Camera Removed
    For your 2021 Ram 2500 Tradesman diesel you will need to use a universal camera system like the Rear View Safety Backup Camera System # RVS-770613-NM. At this time we do not have a camera system which is compatible with the your Ram's wiring.
    view full answer...
  • Recommended Wireless Camera for Aluminum Trailer
    I do have a solution for you, however there isn't a good way to permanently mount the Rampage Wireless Backup Camera # RA7710 to your trailer and since the trailer is aluminum you won't be able to utilize the magnetic base. A better option will be with the Swift Hitch Wireless Camera and Monitor # 04928. Like the Rampage System this camera does have a magnetic base but it also features pre-drilled holes that can be used to permanently mount the camera using a couple 1/8 inch screws or...
    view full answer...
  • Backup Camera System For An All Aluminium Gooseneck Cargo Trailer
    You're correct that when mounting a wireless backup camera to an aluminum trailer, there is the potential for signal interference. This is really the case with any trailer when using a wireless system. We have found in these cases that mounting the camera towards one side of the trailer and having the monitor on the same side provides a much better signal to combat possible interference with aluminum barriers. The Swift Hitch Wireless Camera and Monitor # 04928 is one such solution...
    view full answer...
    Image 1 for
  • Rear View Safety Backup Camera and Monitor
    The Rear View Safety Backup Camera - Heated - Night Vision - RCA Connectors # RVS-812N is designed to go to any external monitor that has RCA connectors. We don't offer monitors alone that are compatible but we do have complete systems including monitors that I recommend instead. - Rear View Safety Backup Camera System # RVS-770613-NM - Rear View Safety Backup Camera System - Weatherproof Monitor - Quad View # RVS-7709900Q I have added links to video reviews and manuals for you to check...
    view full answer...
  • Can Additional Cameras be Added to Rear View Safety Backup Camera System RVS-770613-NM
    Yes, you can add two side view cameras using part # RVS-775L (flush mount) or part # RVS-771 (mounts on bracket) and pair them with the Rear View Safety Backup Camera System # RVS-770613-NM. You can purchase a whole kit that comes with 3 cameras with part # RVS-770615 instead if you'd rather get everything in one package.
    view full answer...

Do you have a question about this Backup Camera?

Info for this part was:

Employee Tyler C
Edited by:
Tyler C
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Daron K
Written by:
Daron K

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924