To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Use your Roadmaster tow bar to tow your off-road vehicle behind your motor home with these adapter brackets. They attach to the 3/4" thick shackle mounts on your bumper where the D-rings are attached.
Features:
Tow your off-road vehicle with your Roadmaster motor-home-mounted tow bar using these adapters. Simply attach the adapters to your tow bar's arms in place of the quick-disconnects. Then remove the D-rings from your Jeep's bumper and hook the tow bar up to the shackle mounts. These adapters fit shackle mounts that are 3/4" thick. They attach to the mounts using the holes where the D-rings are mounted. The adapter pins include sleeves that allow them to fit in both 7/8" and 1" diameter holes.
Average Customer Rating: 4.9 out of 5 stars (101 Customer Reviews)
Use your Roadmaster tow bar to tow your off-road vehicle behind your motor home with these adapter brackets. They attach to the 3/4" thick shackle mounts on your bumper where the D-rings are attached.Very robust and well built product. Product came with all the necessary hardware for perfect fitment on our 2002 Jeep Wrangler. The reason for the 4 vs the 5 star review is the fact the finish was damaged on one of the anchors when received. This doesn't affect the performance of he product, however it was unfortunate to see. It is possible however that the finish damage happened during shipping, although everything was fairly well packed so I am unsure. Either way, I would highly recommend this product for anyone needing proper tow bar anchors for oversized bunpers.
Jenny N - 04/15/2022These are what I had been looking for and they wernt even available from the manufacturer. They come with a slip in sleeve for one inch clevis tabs but are 7/8 hole and 3/4 inch wide slot. I'm using it on the falcon 2 tow bar. These ends come with slip on tips that must fit a different bar from the vendor BUT they can just be unbolted and are a direct fit to my thread on ends of my tow bar. Perfect fit! See photos of the last end pieces I tried as well from Amazon.
Ronn w - 11/01/2017The adapters were exactly as described. This is the only way to go when attaching a Roadmaster tow bar to your d ring bumper. Took a bit of force, but I was able to press the provided bushings into the d ring.
Joel P - 08/17/2018
These D-ring adapters worked perfectly on my 2021 Jeep Gladiator that I tow behind my motorhome. I replaced the stock bumper on my Gladiator with an aftermarket bumper. The help I received from etrailer is outstanding, answering my questions timely and accurately.
I have a Jeep JKU with an aftermarket front bumper. This product allows me to use the D- ring mounts to tow the Jeep with my Falcon 2 tow bar. It worked perfectly no problems. The longest trip towing the Jeep was from SoCal to South Dakota and back. This setup worked flawlessly. One of the awesome things about this product is it came with inserts that allowed me to use these with my 1 inch diameter D ring holes because these are 3/4 inch
Product shipped quickly and arrived in perfect condition. The adapters are high quality and are very heavy duty. The fit my aftermarket bumper perfectly.
William - 01/13/2022The product was just fine. I was little upset with delivery it didn’t go as I expected. I have always received items from-trailer as promise when purchased this time it sucked. Hopefully that it was something they had no control of. I am waiting for my second. Order that as well is late so we will see. This could be the order that has me thinking twice about ordering from etrailer.
I installed the D ring tow assymbly as soon as I got them. They look great and I can now tow all my Jeeps with one tow bar.
These two products made it possible to tow my lifted jeep with an after market front bumper thousands of miles without any issues
After speaking with Roger R he showed me an economical safe way to utilize an existing tow bar for my Jeep Wrangler, he was helpful considerate and very mindful of safety i appreciate that
Fast shipping . Haven't tried yet. But I know it'll work .
Laurance - 04/25/2022Tow bar adapters arrived within 4 days of placing my order. The adapters fit perfectly onto the D rings of my aftermarket bumper for my 2016 Jeep Wrangler and onto my old Roadmaster 5250 tow bar. Now I can tow my Jeep behind my motorhome.
These mounts are part of the excellent Roadmaster tow bar system. With these mounts I can leave the Roadmaster cross-bar in the garage and use the shackle mounts in the bumper instead. Takes a bit of creativity to arrange for safety cable connection points and a new place to hook the winch cable but these efforts are well spent in order to clean up and simplify the tow system. Kudos to Roadmaster for this item and to etrailer for making it available.
This comment applies to both the RM-035 and the RM-035-1.
Robert - 10/25/2018Product delivered as promised. I will order from from etrailer again in the near future.
I can’t say enough about the customer service! Christian helped me find the part I desperately needed. I chose 4 day shipping and it came right in time. The tow bar mounts fit great. Etrailer and Christian saved our summer trip! Thank you so much.
This piece will not work the way you said it would work. Very disappointed The falcon to towbar will not connect to these Fittings! The part that connects it to the falcon 2 Has a threaded end on it . The piece you sent me has a bolt that goes through a pipe that is approximately 1 inch. The threaded in on a falcon two is approximately 3/4 of an inch. Part totally wrong in every way
Heather A - 10/30/2018Most accurate people with trailer stuff. Helped me out in a pinch. I just wish shipping was less, but not the fault of eTrailer
Landrin - 11/04/2020The ends are heavy, strong , well made, fit my existing tow bar and work just fine ( as advertised). I ordered them to replace another style end due to changing tow vehicles, and the mounting point style/setup on the jeep. The ends have a 1" ID measurement. On the vehicle i went with a bracket setup from Maximus-3. There a frame mounted bracket setup using U-Bolts. There a D-Ring/tow loop setup. The bracket end, or ear where pin goes thru is 3/4" wide. This leaves a 1/4" of slop when mounted, which I wasnt 100% thrilled with. So, I ended up adding a thick washer on each side to take up the 1/4" of slop. A little bit of a pain when hooking g/un-hooki g, but completely functional with no issues. I called maximus to see if they could make their bracket in 1" wide matl and they said no, not an option. Again, all in all functional..
I bought a Falcon 2 tow bar, but the height of my 2007 Duramax, was to low for the 93 YJ, (lifted 2 1/2 inch and 35 inch tires) I was towing behind. So I bought the Roadmaster High/Low adapter to get me where I needed to be. I then also wanted to simplify the connection on my front Warn bumper, because I had the D-Ring plates already there and welded in place from Warn. So I also ordered the 3/4 inch D-Ring bar adapters. Man, I have to say, this made hooking up and flat towing my YJ around, so much easier. Everything is heavy duty and made better than I thought it would be. Be careful when ordering the D-Ring adapters for your particular bumper, they make a few different sizes. Measure twice, order once.
The adapters fit the "D Ring" shackle points on my front bumper perfectly allowing me to use the Roadmaster Nighthawk All Terrain tow bar on my 98 Jeep Wrangler. Just returned from a 2800 mile road trip and this combo made hooking up and unhooking so easy, all I can say is I wish I had done it sooner. Thank you Julie N. for all your help.
The product was exactly what I ordered loos like good quality and a great price
I have a 2008 jeep wrangler which I tow behind my motorhome. The Roadmaster tow bar was set up for stock bumpers but I am now installing off road bumpers with a winch. These adapters install replace the original tow bar ends and will allow me to tow the jeep using the D-ring mounts. It took me five minutes to install them and although I have not towed the jeep there is no reason they will not work as expected. They will also allow any vehicle with a 2" rear hitch receiver to tow another vehicle with D-ring attachments. Great for off road enthusiasts.
George B - 06/07/2017Works great and fits great. Had to use old threaded-knuckle due to the Falcon All-Terrain not having lock bolt holes, but still works as needed.
Works great. Fits the D rings on my Jeep perfect.
These adapters are exactly what I needed. Looks like they will work perfectly to interface my Blue Ox tow-bar with my Jeep aftermarket bumper with D ring attachment points. Now i can tow either my Yukon XL or my Jeep Wrangler with one tow bar. Good Job Troy H!
Charles - 08/09/2019
Do you have a question about this Base Plate?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Helpful Link
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.