Blind Spot Monitoring System for RVs and Motorhomes Up to 35' Long

CUB Blind Spot Detection

Safely change lanes or back up your RV or motorhome when traveling. Advanced radar sensors detect vehicles or pedestrians entering your blind spots, and the pillar-mount LED indicators emit audio and visual alerts to warn of imminent danger.

Features:

• Blind spot monitoring system detects blind spots while traveling in your RV or motorhome
• Left and Right radar sensors prevent accidents when changing lanes or backing up
  • Blind spot detection tracks vehicles entering your blind spots
  • Lane change alert warns of vehicles approaching when you activate your turn signal
  • Rear cross traffic alert warns of vehicles or pedestrians while backing up
• LED indicators light up and sound an alarm when anything enters your blind spots
• OBD-II connector works with your vehicle's diagnostics system to ensure accurate readings
• Durable construction resists the elements
  • ATSM D4329 tested for proven UV resistance
  • IP67-rated to protect against dust and water submersion in up to 3' for 30 minutes
• ISO 17387 Type 3 blind spot detection system standards compliant
• Automotive-grade connectors and wiring included for installation - drilling required
  • Radar sensors install on the left and right side of the RV's rear exterior
  • LED indicators and buzzer install on the interior A-pillars
  • Power button can be installed on center dashboard or A-pillar
  • Control unit can be stored under the dashboard, seat, or inside the console

Specs:

• Application: RV or motorhome up to 35' long
  • Compatible with vehicles with OBD-ll connector, 2008 and newer or with J1939 Type 2 250K connector
• Operating temp: -104 F to 176 F (-40 C to 80 C)
• Radar frequency: 24GHz
• Input voltage range: 9V to 16V
• Harness length: 35'
• 1-Year limited warranty

Tired of relying on your side mirrors, an unsafe glance over your shoulder, or just praying there's nobody in your blind spot when changing lanes? Back up without the worry of getting smoked by another vehicle speeding by or hitting a distracted pedestrian on their phone. This CUB blind spot monitoring system features advanced radar sensors that monitor adjacent lanes, even in areas with low reception such as tunnels and mountains, and pillar-mount LED indicators that provide audible and visual alerts from inside your vehicle, ensuring complete safety when hitting the open road in your RV or motorhome.

Blind Spot Detection

The blind spot detection feature tracks and alerts you of other vehicles entering your blind spot. It automatically activates when your RV or motorhome exceeds 15 MPH and begins to monitor other vehicles when they enter the "Warning Zone" starting at 75' away. Once a vehicle is within 16' or approaching at high speeds and within 2 seconds of potential impact, the LED indicators will illuminate to the corresponding side.

Lane Change Alert

Lane change alert warns you of vehicles approaching prior to changing lanes. This feature activates when both the RV exceeds 15 MPH and the turn signals are in use. It begins to monitor other vehicles when they enter the "Warning Zone" starting at 75' away. Once a vehicle is within 2 seconds of potential impact, the LED indicators will beep and flash to the corresponding side of the activated turn signal.

Rear Cross Traffic Alert

Rear cross traffic alert warns you of approaching vehicles or pedestrians while backing up. It automatically activates when the RV or motorhome is placed in reverse and begins to monitor low-speed rear cross traffic starting at 60' away. Once a vehicle or pedestrian is within 2 seconds of potential impact, the LED indicators will beep and flash to the corresponding side of the oncoming rear traffic.

VS-95A042-C CUB Blind Spot Detection System for RVs and Motorhomes - Lange Change Alert - Rear Cross Traffic Alert - 35' Harness

Installation Details 

Alternate Instructions