CE Smith Panel Bracket for 12" Boat Trailer Rollers - Galvanized Steel

See what our Experts say about this CE Smith Boat Trailer Parts

• Does Centering Keel Roller # CE29505 Come with Install Brackets
  The self centering roller part # CE29505 does not come with a mounting bracket but for that we have the # CE10305G for a bracket and for a roller # CE10727A which includes pal nuts.
  view full answer...
• What Hardware Is Needed To Mount CE Smith Panel Bracket CE10305G For 12" Keel Roller?
  To mount the CE Smith Panel Bracket for 12" Boat Trailer Rollers - Galvanized Steel # CE10305G you were looking at you have two options. The first being welding the bracket to your trailer. If you go this route you need to make sure to sand off the galvanized coating as it gives off a harmful gas when it is welded. The second and more common option is using U-bolts. The U-bolts will need to match the size of the frame on your trailer so you will need to measure that. For example we have...
  view full answer...
  
• Where To Install a CE Smith Self Centering Keel Roller
  For starters, in order to use the CE Smith Self Centering Keel Roller for Boat Trailers part # CE29505 on your boat trailer you will also need to use the CE Smith Panel Bracket for 12" Boat Trailer Rollers part # CE10305G and the Roller Shaft with Pal Nuts for Boat Trailer Rollers part # CE10727A. In regards to installation, these will need to be installed towards the stern of the boat, in the center of the trailer. This would be the only place that would allow them to effectively center...
  view full answer...
  
• Length Of Shaft Needed For 12" Roller With End Caps On Both Ends
  Hi Melissa, You can definitely install 2 of # YR224-5 end caps on the ends of the # DL21554 while on the # CE10305G bracket, but not with the # CE10727A roller shaft. Each end cap will add 1-1/2" of length so you would need a roller that is at least 15-1/2" long to accommodate the extra length and a little more for the pal nuts to have a good purchase area. That said, we do not have one in that specific length so your best bet would be to grab the Roller Shaft w/Cap Nuts 19" x 5/8" #...
  view full answer...
• Capacity of YR12244-125EC Yates Rubber Boat Trailer Keel Roller
  According to Yates Rubber, the # YR12244-125EC roller technically carries a 400 lb capacity, but the roller shaft like # CE10727A and the mounting bracket like # CE10305G do most of the heavy lifting. This is the strongest keel roller they offer. My contact at Yates tells me that the first thing to bend would be the roller shaft, and a 5/8 inch diameter shaft like what I referred to above wouldn't begin bending until around the 2000 lb mark. It's recommended to install more than one of...
  view full answer...
• Will Roller part # YR12243-5 Fit on Roller Bracket # CE10305G
  The 12 inch roller part # YR12243-5 that you referenced is designed to fit the CE Smith Panel Bracket # CE10305G. You would just need the roller shaft part # CE10727A which comes with pal nuts and you would be set. There isn't a stainless steel version of this available but this will resist corrosion well since it is galvanized. The roller will spin easily and would work well. This would work well for a roller on a boat trailer for a 500 lb boat. 4-1/4 inches is the distance from the...
  view full answer...
• Parts Needed To Replace 12" Keel Roller That Fits 1-5/16" Diameter Pipe
  I have another option for you, but we do not currently carry any Keel Rollers that would fit a 1-5/16" pipe. Instead I recommend going with the Yates Keel Roller for Boat Trailers - Super-Heavy-Duty Rubber - 12" Long - 5/8" Shaft # YR12244-125EC you were looking at and then adding the correct bracket # CE10305G and shaft # CE10727A to your trailer. This will allow you to use a standard keel roller, and make finding replacements now and in the future much easier. I included videos of...
  view full answer...
• Self Centering Keel Roller and Mounting Hardware For Boat Trailer
  The CE Smith Keel Roller for Boat Trailers # CE29505 is our only self centering keel roller. It is 12" wide versus the 8" that you are looking for. We do have the CE Smith Panel Bracket for 12" Boat Trailer Rollers # CE10305G and Roller Shaft with Pal Nuts # CE10727A if you would like to move to the 12" keel roller to lessen the chance of your keel hitting the edge of the smaller 8" roller you currently have.
  view full answer...
• Can I Use the CE Smith Self Centering Keel Roller on my Trailer
  I may have a solution for you, but it doesn't look like your trailer has any bracket in place in order to use the CE Smith Self Centering Keel Roller for Boat Trailers part # CE29505 on your boat trailer. For that reason you would first need to have a roller bracket like the CE Smith Panel Bracket for 12" Boat Trailer Rollers part # CE10305G welded to the frame or attached with U-bolts to match your trailer frame size. If you went the welded on route, the # CE10305G is galvanized steel...
  view full answer...
  
• Height to Top of Roller with Bracket # CE10305G and Roller # YR12243-5 from Mounting Surface
  The top of the roller will end up being 4 inches from the mounting surface. The hole on the # CE10305G is 2-3/4 inches from the mounting surface, and then half of the diameter of the roller part # YR12243-5 is 1-1/2 inches.
  view full answer...
• Diameter of Yates Rubber YR12000 Boat Trailer Keel Roller
  At the narrowest spot in the center, the Yates Rubber # YR12000 Keel Roller is 2-1/4 inches in diameter. At the ends which is the thickest part of the roller, the diameter is 3-5/16 of an inch. For a panel-style mounting bracket, use # CE10305G and for a roller shaft and pal nuts, use # CE10727A.
  view full answer...
• Parts to Mount 12" Roller Guide
  We have the Yates # YR12243-5 side guide roller measuring 12" long with a 5/8" shaft. We also have the CE Smith # CE10305G Panel Bracket for 12" Boat Trailer Rollers in Galvanized Steel. For roller shafts we have the closest we have is CE Smith # CE10727A measuring 13" X 5/8" shaft, in zinc plated steel.
  view full answer...
• How To Help With Centering Boat On Trailer When Loading
  I have a few options to help with loading the boat on the trailer but the best would have to be the CE Smith Keel Roller for Boat Trailers part # CE29505. In order to mount them you'd need the Roller Shaft with Pal Nuts part # CE10727A and CE Smith Panel Bracket part # CE10305G. I would stick with the same type of roller for the front and rear of the boat trailer.
  view full answer...
• Availability Of PVC Keel Roller That Is Self Centering
  I may have an option for you, but there is not a 8" version of the CE Smith Keel Roller for Boat Trailers - Self Centering # CE29505. If you are wanting the self centering feature you will need to use 12" # CE29505 and replace your current mounting bracket with the CE Smith Panel Bracket for 12" Boat Trailer Rollers # CE10305G and a new shaft # CE10727A. We do however have the CE Smith Keel Roller for Boat Trailers # CE29517 which is made of the same material and is the 8" length you mentioned,...
  view full answer...
• Replacement 12" Keel Roller Assembly for Boat Trailer
  Our current keel rollers are designed for a 12" Bracket # CE10305G. We do have these available with the 12" bracket as a Assembly # CE10455G so you get the new roller and shaft. This particular Roller # YR1200Y uses a thermal-plasticized rubber which is stronger than rubber and softer than polyurethane for durability without damaging or marring your boat.
  view full answer...
• Can CE Smith Keel Roller CE29505 be Used With Jon Boat Trailer
  We don't offer 2 inch keel rollers, so you may have meant the 12 inch CE Smith Keel Roller for Boat Trailers - Self Centering - PVC - 12" - 5/8" Shaft - Amber # CE29505. And yes, you can use these on your boat Jon boat trailer, and to do so you will need the Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 13" x 5/8" # CE10727A and CE Smith Panel Bracket for 12" Boat Trailer Rollers - Galvanized Steel # CE10305G. The bracket can be installed with U-bolts such...
  view full answer...
• Recommended Boat Trailer Keel Roller
  You'll want to ensure the height of the new roller is consistent with that of the other support components, such as the roller bunks. This will ensure no one part of the trailer bears more weight than the others. Next time you load the boat you can measure the space at your preferred mounting location and then use the adjustable bracket # CE32004G referenced above to locate the new roller in the correct position. We offer keel rollers in both black rubber and non-marking thermoplastic...
  view full answer...
• Can CE Smith Galvanized Panel Bracket be Used with a Stainless Steel Shaft
  CE Smith Panel Bracket # CE10305G is galvanized steel but the method of which the zinc coating was applied would not matter in terms of galvanic or dissimilar metal corrosion. Stainless steel and galvanized steel work well together with only a slight and minor chance of there being any corrosion. Of course in salt water environments it will increase that chance. So you can use a stainless steel shaft. This bracket takes a 5/8 inch diameter shaft. We do not have stainless steel shafts though...
  view full answer...
• Parts Needed to Install the 12" CE Smith Self Centering Keel Roller
  Hey Manuel, thanks for reaching out! In order to install the 12" CE Smith Keel Roller for Boat Trailers - Self Centering # CE29505 you'll need the Roller Shaft with Pal Nuts # CE10727A along with the mounting bracket kit # CE10305G or # CE10500G. I took a look at our U-Bolt kits and none of them will fit a 3-1/2" square tube so you'll need to source those locally.
  view full answer...

Do you have a question about this Boat Trailer Part?