Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
Easily load your pontoon boat with these roller-style guide-ons. Corrosion-resistant posts support 9" rubber rollers with endcaps. They fit trailer frames up to 3" wide x 4-1/4" tall. Hardware included.
Features:
Specs:
Adjustable boat guides can be fine-tuned to work with your boat and your trailer. The galvanized steel support posts mount on top of the crossmember on your pontoon boat trailer's frame. Just slide the posts into the mounting brackets and secure the posts so that the distance between each bunk and pontoon is approximately 2" to 3". The rubber roller guides help to center your pontoon boat during loading and to support the boat during transport.
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (405 Customer Reviews)
Easily load your pontoon boat with these roller-style guide-ons. Corrosion-resistant posts support 9" rubber rollers with endcaps. They fit trailer frames up to 3" wide x 4-1/4" tall. Hardware included.The rollers appear to be of good quality. You need a deep socket 9/16 to make it easier to put on. Have not tried it out yet since I placed it on my pontoon. Looks like it may be easier to load my pontoon onto my trailer.
Just purchased a new tri-toon watercraft, it did not come with trailer alignment guides …. these roller guides are perfect, we look forward to years of easily aligning the boat to the trailer bunks ….. very well made. Thank you !!
Great product! I ordered this as an alternative to a $650 rail system. The price was far more reasonable for my budget. I have a 24' pontoon and have struggled getting it straight on the trailer consistently so that the logs fall into the rails over the entire length. Shipping was very fast which I was thankful for. Took about an hour to assemble and install.
On my first try this weekend I got the boat on the trailer perfectly. I felt the rear guide nudge the backend over so that it lined right up. Couldn't be happier with this purchase!!!
Doug S.
5/18/2021
Its been a year and still helping me every time I load up. I did add some small flags to the rollers after being to deep and landing a pontoon right on top of the roller. The flags help me not to back in too deep as well as show me I am centered at the back of the trailer.
I received the product timely & packaged well however, they will not fit my boat. I have Horwoods Aluma sport 615 with American trailer. I did some altering to the metal work and installed them anyway. I don’t know how or if it will work yet.
Great product at first glance. Will be installing today, and "testing" getting our pontoon back on a trailer. Came from traditional fishing boat hull, and have been challenged with parking the pontoon on 1st try.
Fast shipping, product packaged well. Thanks.
I received 3 u bolts and 1 formed u bolt. I'm not happy no one where I am carries the formed u bolt. I'm 250 miles from home and not able to use the product I bought.
Brooke M.
9/25/2024
I am so sorry to hear that, Rick, that is super frustrating. Let me see what I can do to get you some replacement u bolts. Be on the lookout for an email!
Very easy to install and great quality took me about 30 mins but I didn't use any power tools which would have saved time. I would say u have a patoon it makes trailering a breeze .
Excellent quality, easy installation…perform as advertised.
They are a great product. Easy to install and made it a lot easier loading up my party barge
!So much easier to line up the pontoon boat on to the trailer
Only takes one shot to line it up where before it would take a lot longer!
Just as described, easy installation and fast shipping.
Order shipped very quick without issue and arrived as described. Functionality of the product is a different story. Even though I installed according to instructions they created a huge gash in the side of one of my toons. Learn from my misfortune and do not buy these!
Katrina B.
7/25/2022
I have contacted the manufacturer and they have confirmed that there is not enough room between your pontoons. The 3 inch space is the same on the left and right, you will need to return what you had bought. These guide-on’s are to help put the boat on a trailer, outside of the pontoons. We do not sell a pontoon guide that goes under the boat, only on the outside of a trailer.
Mounted the way they should. Makes loading my pontoon very easy. Very happy with them.
I had so much trouble getting my toons on the trailer. The guides help position it if your a little off by pushing the toons over into the bunkers and then holding the pontoon in the rear from swaying if your a little to deep into the water with your trailer. I load up now in 4 minutes instead of 10 to 15 with fighting the dock waves.
I have a pontoon boat and the bunks on the trailer are poorly designed and the boat is very difficult to get on the trailer properly. After installing These guides loading the boat is much easier. Very pleased with this product.
Simply put, excellent product and fast delivery. Thank you
Easy to install.
Really helps getting the tri-toon on the trailer especially in winds or fast currents.
They did not work. Bent out of shape and were basically too weak and cheap to do the job. I remove them to keep from damaging my new boat
Easy to install my trailer was missing the middle set. I don't know I ever loaded the 24fter with out them great products
Unfortunately, they did not work out for me at all. In fact, they ended up putting some pretty good gouges in the toons of my tri-toon boat. The problem is, they do not have a visual indication of where your boat is in relation to the trailer. I ended up paying a welding shop to put two guides on the back of my trailer that stick up out of the water. They keep the tri-toon boat aligned and provide a visual out of the water so that I know I am aligned properly. I have scrapped the ones I got from you..
Working out great for my new boat and trailer. Learned just how much it needs to be sitting out of the water and guides the boat right on.
Great product
the smith pontoon boat loader roller went on very easy ,Just like the video showed. And the price was very good. Thank You etrailer
Looks great! heavy dutie, Thank you!!
Shipping was very prompt and arrived in good condition. Installation was easy and guides appear to be sturdy and well made. Although I’ve not yet loaded my boat on the trailer since installing the guides, I am confident they will make loading so much easier!
David
1/30/2021
After putting my boat in and taking it out a couple times these guides work beautifully! A big help!
Do you have a question about this Boat Trailer Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Steven
9/13/2024
I have the C E Smith Roller style. Still working great. I can drive my pontoon right on the trailer with no issues. Makes it look professional when you pull onto the trailer.