CE Smith Roller Bunks for Boat Trailers - 5 Rollers Each - 4' Long - 1,500 lbs - 1 Pair
(39 reviews)
Price: $187.91
CE Smith Roller Bunks for Boat Trailers - 5 Rollers Each - 4' Long - 1,500 lbs - 1 Pair
Item # CE27700
Retail:$199.99
Our Price: $187.91
You Save: $12.08
This item qualifies for Free Shipping
Need help with installation?
Locate installers near me- All Info
- Reviews (39)
- Q & A (0)
- Photos
- Why etrailer?
CE Smith Boat Trailer Parts - CE27700
- Roller and Bunk Parts
- Rollers
- Roller Bunk
- 4 Feet Long
- Polypropelene
- 1500 lbs Capacity
- CE Smith
Channel-style roller bunks upgrade your boat trailer's standard bunk boards, allowing for smooth loading and unloading and superior hull protection for your boat. Attach directly to bunk boards or use mounting brackets (sold separately).
Features:
- Channel-style roller bunks upgrade your boat trailer from standard bunk boards
- Ease boat loading and unloading - boat rolls smoothly over bunks
- Support hull during trailering
- Heavy-duty, black polypropylene rollers absorb road shock and protect hull from scratches
- Galvanized steel construction is sturdy and rust resistant
- Pre-assembled bunks easily install in either of 2 ways
- Mount to existing bunk boards (hardware not included)
- Attach to trailer frame with mounting brackets (CE10003G-4 - sold separately), allowing for height and angle adjustment
- Made in the USA
Specs:
- Quantity: 2 bunks with 5 rollers each
- Weight capacity: 1,500 lbs
- Bunk length: 4'
- Roller dimensions: 4-3/4" wide x 2-1/2" diameter
- Channel width: 2-1/8"
- Top of roller to bottom of channel: 2-13/16"
CE Smith's roller bunks convert your boat trailer's guide-ons from bunk board style to roller style. Instead of sliding on and off your trailer's bunk boards, your boat will smoothly roll. This not only simplifies the process of loading and unloading, but it also protects your boat's hull against scratches. Mounted in a rust-resistant galvanized steel channel, the durable rubber rollers absorb road shock during trailering.
Installation
The roller bunks are pre-assembled and can be mounted directly to your existing bunk boards (mounting hardware is sold separately). If you want to replace your bunk boards and attach the roller bunks to the front and rear crossmembers of your trailer frame, use a four-pack of swivel mounting brackets (CE10003G-4 - sold separately). These brackets allow you to install the roller bunks at different heights. In addition, the brackets enable the bunks to tilt to accommodate and support boat hulls of different sizes.
Galvanized Steel
Steel parts are galvanized by being hot-dipped in zinc after they have been stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
27700 Replacement Roller Bunks by CE Smith - 48" Long - 5 Rollers Each - Qty 2
California residents: click here
Customer Reviews
CE Smith Roller Bunks for Boat Trailers - 5 Rollers Each - 4' Long - 1,500 lbs - 1 Pair - CE27700
Average Customer Rating: 4.8 out of 5 stars (39 Customer Reviews)
Channel-style roller bunks upgrade your boat trailer's standard bunk boards, allowing for smooth loading and unloading and superior hull protection for your boat. Attach directly to bunk boards or use mounting brackets (sold separately).by: Jerry 01/29/2022
Mounted a pair of these on the rear of a new Harbor Freight trailer and it has made loading and unloading my 10' Bass Raider boat a breeze. I'm a complete novice with this type of thing too, so it's saying a lot that I installed them with little effort or instructions to figure it out. Highly recommend. The product is well worth what it's priced at.
by: Alfred04/02/2022
They work great, be careful, boat will fly off trailer if not secured as the boat is launched into the water.
by: Jeff 07/25/2022
Worked well
by: Roger 08/02/2022
Very sturdy and well built
by: John11/29/2018
I love these roller bunks. Purchased two pairs of the four-foot size to mount on my floating dock to park my two Yamaha Waverunners on to keep them high and dry. They work and perform more than perfectly. I mounted each bank of rollers on a 2"x6" board for the required added clearance at 23" inches apart on center. Perfect. They can be rolled off easily by hand by one person, once marine grade grease(optional) was applied to each roller mechanism with a grease gun. Wipe them off, and there is no mess. I am actually going to mount another two pair on to a plywood spare removable platform on a general-use utility trailer, making it unecessary to purchase a usually poorly built purpose-built trailer. Nearly one year out in the open on the Florida Gulf Coast at the beach with zero rust to-date. Unheard of in these parts. Enough said. Thank you so very much for you help with such a fine product. J.P.
by: Thomas05/06/2022
They work great, makes loading boat much easier.
by: john s10/20/2017
Got rollers took few hours to install had to take bunkers off drill holes once done reloaded boat with easy
Sure they will make loadin and unloading much easier . Thanks for great product its second pair I have install on boat trailer
Comments
by: Tim 07/27/2021
Rollers not only arrived as promised, the quality was beyond expectations. I’m so impressed that l’ll be forwarding pictures of the before, during, completion, and as a bonus, I may even attempt a launch and recovery video. Hopefully, all by the end of the week! Thank You
by: Gerald05/02/2019
I am very pleased with these rollers. The are build very strong and I am sure will last a long time. It has been a pleasure working with you. Another thing I really liked was the set up you gave me to track the shipment. It was the first time I've seen this, and it works so easy. I will sure plan on using you for anything else I need for my boat.
Thanks Gerry
by: Austin 01/27/2022
all was great. great customer service.
by: Roger T.09/01/2017
The product is exactly as advertised and cheaper than the other places we looked. Free shipping is also a plus. The roller bunks came within days and we are very pleased with the product and the company. This will be our first stop for any other parts we may need.
by: Terry 09/06/2021
It was wonderful to receive this quality product in only three days...and the ups shipping was free! Great product, great people to deal with, fast, free
shipping....doesnt get any better than that!
by: John 06/06/2021
That was delivered FAST I haven’t opened the box waiting for the trailer to be delivered. Once trailer completed I can inflate my AQUOS 12.5 fishing pontoon platform.
by: Lawrence07/21/2018
Low water levels made my board bunks usless, my boat loaded with minimal effort using these roller bunks. Thanks!
Comments
Application is for a boat house carriage and even with higher water this year, the roller bunks continue to work great.
Lawrence R - 07/23/2019by: Tom H06/15/2017
Unless your boat's bottom is perfectly flat for the length of the rollers, these will have only a few points of contact and stress your hull. My hull is very slightly curved, which my bunks easily conformed to, but these rollers did not. And they didn't make it easier to push off the boat.
by: John 07/23/2021
Love them I purchased another pair so now I have 8 Feet of rollers they work great I’m 72 and unloading is so easy they are heavy duty and high quality I would recommend
by: Michael01/11/2018
The personnel (specifically Lisa D) and customer service is excellent. I highly recommend CE Smith Roller Bunks and all of the products at etrailer.
by: John 09/11/2021
You guys are CRAZY FAST I’m watching college football Texas vs Oklahoma and I get this email that my rollers have arrived. I said “what” went outside and there they were. Great product GREAT Customer Service
by: Mitchell 04/30/2021
I was looking for something to put near the water so my son could winch his little boat in and out of the water I saw these and thought I'd give these a try seem to be the simplest and easiest cure for what I needed they work just fine
by: Chris M.08/25/2017
Purchased Roller Bunks for the boat trailer. My 18 ft. Sundance slides off with ease. These seem to be the most sturdy bolt on bunks on the market. Great price and super fast free shipping made it worthwhile shopping here.
by: Mark J09/14/2016
Great product! I would recommend anyone use these rollers to replace their carpeted bunks.
by: David06/07/2019
Repeat customer. Excellent product. I'm using them as a ramp up in a boat house for additional support on the rear end. Pulls a large 18 ft up with winch smoothly. I now have two sets on both sides and i'm thoroughly impressed. Highly recommend.
by: Clyde Swindell11/19/2016
Excellent,just what I needed.
I unloaded the boat,took the trailor back to my house and put them on in 30mins
Good on shipment time they arrived two days later
Comments
The bunk rollers still work great,just back down the ramp and the boats rolls off with ease
Clyde S - 11/19/2017by: Chuck C02/04/2017
Put on trailer with help of one other person in about one hour. Should have done this long ago. Units came when told it would be here.
by: Rik 04/19/2021
Simple and perfect for what I need them
25
39
Show More Reviews
See what our Experts say about this CE Smith Boat Trailer Parts
- Spare Tire for 2003 Smokercraft Osprey Boat TrailerI don't have any reference material that would tell me the original tire/wheel size of your boat trailer. The existing tires will have the tire size information printed on the sidewall. With the tire size, I'd be happy to make a recommendation for a spare wheel/tire combo. You mention that the existing wheel is a 5 lug. We offer wheel/tire combos that have a 5 on 4-1/2 inch bolt circle. I'll link you to an FAQ article that shows how to confirm your bolt pattern. We offer two 13 inch...
view full answer... - Size of Roller Bunks Compared to Current Bunks on Boat TrailerHaving 8 foot bunks will help to best support your boat while it is on the trailer. You can use two of the 4 foot sections # CE27700 on each side to create 8 foot long bunks.
view full answer... - Roller Bunk Recommendation to Replace Wood Bunks on Boat TrailerRoller bunks would be stronger than wood bunks since metal is much stronger than wood. The rollers would allow your boat to not have to be launched so deep too since it can roll off of the trailer. For 4 foot sections of roller bunks we have the part # CE27700.
view full answer... - Will Galvanized Bunk Rollers Rust if Always Submerged in WaterThe CE Smith Roller Bunks # CE27700 are made with galvanized steel which is designed to resist rust. However, it's not 100 percent rust-proof. Over exposure to water, like keeping them submerged all the time, will speed up the process. It's impossible to say how long they'll last but the short answer is yes, they will eventually rust. One suggestion to prolong this is to build the dock in sections so that you can switch the parts that are submerged periodically. This way the parts...
view full answer... - Roller Bunk Recommendation for 16 Ft Smoker Craft Pro-Lodge Boat TrailerAlthough you may be able to get by with just using one set of 5 foot roller bunks, I am a firm believer that in this case more is better. Having rollers the entire length of your wood bunks will not only make the loading and unloading process easier but it will also provide added support. Since the cross members on your trailer are 7 feet apart, I recommend that you keep the existing wood bunks and attach two sets of the CE Smith Roller Bunks for Boat Trailers, # CE27700, to those. I do...
view full answer... - Weight of Each of the Rollers that Come with Rollers # CE27700Each of the rollers that comes with part # CE27700 weighs 13 lbs.
view full answer... - Dimensions of CE Smith Roller Bunks for Boat Trailers CE27700The CE Smith Roller Bunks for Boat Trailers # CE27700 are sold as a pair and have a nominal length of 4-feet. I went to our warehouse and measured their actual height and width. The rollers are 3-inches high (measured from the underside of the metal channel to the top of the roller wheels) and are 4-3/4-inches wide at the rollers.
view full answer... - Are All Metal Parts of CE Smith Roller Bunks GalvanizedYes, according to CE Smith all of the metal parts on Roller Bunks # CE27700 are galvanized. If they were not then the dissimilar metals could cause galvanic corrosion even if they weren't in water.
view full answer... - Can Roller Bunks be Used on Boat Trailer of 16 ft Sea Nyph Fishing MachineI looked up pictures of trailer that typically carry the 16 ft sea nyph fishing machine and yes roller bunks like the # CE27700 can be used on it.
view full answer... - Rollers Bunk Recommendation for CE Smith Multi Sport TrailerFor a set of 5 feet long roller bunks that you could attach directly to your wood bunks you would want the part # CE27710. These are even CE Smith roller bunks like the trailer you have. I attached a review video for you to check out as well.
view full answer... - Roller Bunk Recommendations for Replacing 13.5 feet of Roller BunksI'd probably do two sets of 5 foot bunks like part # CE27710 and just allow the amount of gap needed between the two bunks. Or if you wanted the bunks not to have any gaps between them you could go with an additional set of 4 foot bunks part # CE27700 and you could trim them down to match the length needed.
view full answer... - Will Roller Bunks Work on Jet Ski TrailerThe CE Smith Roller Bunks - 5' Long # CE27710 will absolutely work for your jet ski trailer and they will contour to your jet skis in the exact same manner as the bunk boards you have now do. The roller bunks should match the length of your existing bunk boards and there is the aforementioned 5' long boards as well as the CE Smith Roller Bunks for Boat Trailers - 4' Long # CE27700. You can mount them onto your existing bunks like you mentioned and their 1,500 lb capacity will be plenty...
view full answer... - How To Determine the Correct CE Smith Roller Bunks for a Boat TrailerThe CE Smith Roller Bunks for Boat Trailers part # CE27710 are 5' long so as long as these are close to the same length of the bunk boards you have on your trailer now they will work well for you. The CE Smith Roller Bunks for Boat Trailers are is offered in a 4' long version, part # CE27700. I cannot confirm fit based on the make or model of the boat/trailer unfortunately, only the length of the existing bunks.
view full answer... - Recommended Roller Bunks for Lund Boat and Trailer That Uses Wooden BunksYou can make loading and unloading your 14-foot Lund onto your trailer a lot easier by adding roller bunks to your existing 2 x 4 carpeted wooden bunks. These can bolt on directly to your existing bunks, even right over the carpet. We offer them in 4-foot and 5-foot lengths that you can see by clicking on the link provided. I recommend using two pairs of 5-foot rollers # DL21741 for their higher 3000-lb capacity or the CE Smith 4-footers # CE27700 that you referenced. With either of these...
view full answer... - How to Reduce Rolling Friction on PWC Trailer to Allow Use of Single-Speed Hand Winch DL16001Since the Dutton-Lainson Single Speed Hand Winch # DL16001 fits your mounting area and has the handle type you need, I suggest you consider just reducing the friction on your PWC trailer by installing roller bunks. Roller bunks like # CE27700 substantially reduce friction between the PWC and the trailer and this means the 400-lb capacity winch will have to work less hard. This not only makes your loading easier and faster but it will also extend the life of your winch by reducing its workload.
view full answer... - Roller Bunks For Parker Boats Model 1801 Center ConsoleI recommend the Dutton-Lainson Boat Trailer Deluxe Roller Bunk # DL21740 with their 2,500lb capacity per set over the CE Smith # CE27700. With them only having a 1,500lb capacity limit per set I would not feel comfortable using them on your boat. The majority of the weight will tend to be on the rear of the boat. I would fear the rear set of rollers becoming damaged as they might be very close to their limit by the time you add any other gear or accessories to the boat.
view full answer... - Recommended Roller Bunks For 4,500lb Boat On Boat LiftI have a solution for you but the CE Smith Roller Bunks for Boat Trailers item # CE27700 you referenced only have a 1,500 lb capacity per pair. I recommend the Dutton-Lainson Boat Trailer Deluxe Roller Bunk item # DL21741. These rollers have a 3,000 lb capacity per pair so you will need to purchase two sets to support your 4,500 lbs boat. They come in 5' long sections and have 12 sets of 3 rollers.
view full answer... - Solution for Needing 8 Foot Roller BunksWe do not offer 8 foot roller bunks but you could use two sets of 4 foot roller bunks like the part # CE27700.
view full answer... - Can Roller Bunks Be Used On a Pontoon Boat Trailer?Yes, you can use Roller Bunks # CE27700 with a pontoon boat trailer. These come in 4' long sections that you can attach directly on top of the bunk boards or you can use the V-Wing Bolster Bracket # CE26244G if you are concerned with raising the height of the boat on the trailer as you already mentioned the shallow ramp. I do recommend using Roller Style Guide-Ons # CE27672 to help position the pontoon on the rollers when loading your pontoon boat.
view full answer... - Can Roller Bunks be Used to Replace Carpeted BunksThe CE Smith Roller Bunks, # CE27700, that you referenced would be a great option for your boat trailer. These roller bunks are 4 ft long and they can be mounted directly on top of your current wood bunks. You can also use the CE Smith Mounting Brackets, # CE10003G-4, if you want to replace the wood bunks with the roller bunks. Keep in mind, these bunks have a weight capacity of 1,500 lbs.
view full answer... - Roller Bunk Recommendation for a Boat Trailer with Wood BunksThe CE Smith Roller Bunks, # CE27700, that you referenced would be a great option for your boat trailer. These roller bunks are 4 ft long and they can be mounted directly on top of your current wood bunks. You can also use the CE Smith Mounting Brackets, # CE10003G-4, if you want to replace the wood bunks with the roller bunks. Keep in mind, these bunks have a weight capacity of 1,500 lbs, but based on your photo, I do not think you will have much of an issue with that.
view full answer...
- Roller Bunk Recommendation for Jet Ski RampFor the 10 foot long bunks you have two sets of the CE Smith roller bunks part # CE27700 would work well for you. These can be mounted directly to the wooden bunks you have already or you can remove them and install them with the brackets part # CE10003G-4. The steel of these buns are galvanized which will do an excellent job preventing rust and corrosion. They would last longer than wood being constantly submerged.
view full answer...
- Recommended Roller Bunks For Commercial Crab Boat 5,000-6,000 lbsFor your Commercial Crab Boat, I recommend the CE Smith Roller Bunks for Boat Trailers - 5 Rollers Each - 4' Long - 1,500 lbs - 1 Pair # CE27700. These 4 foot long rollers are 4-3/4 inches wide x 2-1/2 inches diameter. I recommend using the CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4 # CE10003G-4 to support it. I would use extras for more support and better weight dispersion on your frame due to the size and weight of your boat. As long...
view full answer... - Roller Bunk Recommendation For Boat Trailer Used In SaltwaterIf you are looking to replace the bunks on your trailer with roller bunks, we have a few that may work for you. For a 5 foot bunk I recommend the CE Smith Roller Bunks, part # CE27710. These are constructed of 12 gauge galvanized steel and are rust and corrosion resistant. Since you said you are needing them for salt water, we recommend rinsing them with fresh water to prolong the life of the rollers. If you need a 4 foot version of these rollers I recommend part # CE27700. To mount...
view full answer...
Do you have a question about this Boat Trailer Part?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality boat trailer parts for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate boat trailer part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Edited by:
Frances L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Joshua S
Test Fit:
Nicholas E
Written by:
David L
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.