Save Up To 60% on HOT Independence Day Deals!
Channel-style roller bunks upgrade your boat trailer's standard bunk boards, allowing for smooth loading and unloading and superior hull protection for your boat. Attach directly to bunk boards or use mounting brackets (sold separately).
Features:
Specs:
CE Smith's roller bunks convert your boat trailer's guide-ons from bunk board style to roller style. Instead of sliding on and off your trailer's bunk boards, your boat will smoothly roll. This not only simplifies the loading and unloading process, but it also protects your boat's hull against scratches. Mounted in a rust-resistant galvanized steel channel, the durable rubber rollers absorb road shock during trailering.
Installation
The roller bunks are pre-assembled and can be mounted directly to your existing bunk boards (mounting hardware is sold separately). If you want to replace your bunk boards and attach the roller bunks to the front and rear crossmembers of your trailer frame, use a four-pack of swivel mounting brackets (CE10003G-4 - sold separately). These brackets allow you to install the roller bunks at different heights. In addition, the brackets enable the bunks to tilt to accommodate and support boat hulls of different sizes.
Galvanized Steel
Steel parts are galvanized by being hot-dipped in zinc after they have been stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (71 Customer Reviews)
Channel-style roller bunks upgrade your boat trailer's standard bunk boards, allowing for smooth loading and unloading and superior hull protection for your boat. Attach directly to bunk boards or use mounting brackets (sold separately).A couple of the lakes I fish regularly have shallow ramps so Roller Bunks should make launching and retrieving my boat somewhat easier. Changing from basic Bunk Boards to Roller Bunks on my C.E. Smith Sport Utility Trailer was an easy process. Even though it was an option I chose not to mount the Roller Bunks directly onto the Bunk Boards but instead to remove the boards and mount the rollers directly to the frame. I used the same Bolsters I already had mounted with the Bunk Boards but removed the swivel bracket with two holes and replaced them with single hole brackets that fit the Roller Bunks. I did however have to drill one hole in each Roller Bunk frame in order to line up with the holes in the front swivel brackets. A slight adjustment of the bolsters toward each other was necessary so the Roller Bunks would be centered under my boat in the proper location. I have not launched my boat yet but it certainly moves more freely with the Roller Bunks.
Alfred - 06/06/2019Took a little while to install with having to make some adjustments with the u-bolts. It took some adjustments to line up properly with a jon boat. If installing on a bass boat or pleasure boat trailer, I suggest finding a way to suspend the boat above the trailer to be able to align the bunks with the bottom of the boat for proper placement on the trailer.
Easy to install and work Great on 14 1/2 ft Starcraft deep hull.
Robert - 04/12/2022I don’t usually write reviews, but this outfit/transaction is worth it.
Good quality product, but what really impressed me was the fast delivery time.
We all hear about supply chain issues, but this vendor did an outstanding job.
Thank you very much.
They were easy to install. I mounted them right on top of my carpeted bunks. The boat rolls easily onto them. But the boat also rolls very easily off the trailer now so be carefully. I am very pleased with this product and I haven't had an issue in the year I've owned them.
Well made, sturdy and already installed on my bunk trailer. It is much easier to launch my small boat than before I installed the roller bunks. I should have bought these years ago.
Ole J - 08/08/2021I just received the roller bunks today, and right out of the box they exceeded my expectations. I am happy with my etrailer purchase for my Jet Ski. I will send photos after installation.
I used the bunks for a boat lift. Easy on, easy off.
Very nice product. Thanks.
The roller system works great. The only issue is with the caps that hold the pins on for the rollers. The caps fall off, then the rollers fall off. I am replacing them with nuts and bolts that will stay in place.
Installed product
Andy E - 04/13/2020Great product so far. Faster delivery than expected.
They work great,easy on easy off.
Used on my dock oft a small jon boat. Perfect solution!! Exceptional Quality.
Great product, easy to install, looking forward to the boat easily going on and off the trailer.
Looks good, easy install, boat will go on this weekend to test it out
I have a Triton trailer and it is almost 7’ between the braces so the longest set of rollers still won’t span to the supports. I had to mount the rollers on runner boards so it doesn’t eliminate the wood and made the installation much more difficult.
I will try it out tomorrow when I load the boat back on.
The rollers were delivered really quickly and were in perfect shape so 5 stars to etrailer on that part.
Was a quick turnaround with zero issues.
The products purchased were solid and of good quality. I'm impressed.
We purchased a used Jon boat and are upgrading the trailer and boat to for our satisfaction. We would not hesitate to purchase other products for etrailer. The videos were very helpful and informative. If I can I will add photos of before and after, soon.
Excellent service excellent product prompt delivery.
Thecorder was on timevearly in fact! Complete and undamaged. Awesome on all fronts.
The product was tracked and delivered as promised. I was quite impressed by the virtual but personal attention to customer service.
So far, the product has met all my expectations.
Their great. they did the job perfectly.
This is a well made product I used the rollers to replace a bunk board.
These worked perfectly replacing the forty year old roller bunks I had. Shipped very quickly.
Jimmy - 06/29/2020Completely updated the axle, suspension, and added roller bunks to my waverunner trailer. Have taken the waverunner in for the winter and back out for the summer one time. All components were great and the trailer rides really well!
Do you have a question about this Boat Trailer Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.