CE Smith Ribbed Wobble Rollers for Boat Trailers - Rubber - 3/4" and 1-1/8" Shafts - Qty 4

See what our Experts say about this CE Smith Boat Trailer Parts

• Are Parts Available for Yates 5 Inch Wobble Rollers?
  We carry boat trailer hardware though not all parts for the Yates Ribbed Wobble Roller 5" Diameter # YR500YW-6P. We do offer Wobble Roller Washer for 3/4" Shaft # CE10983 and Wobble Roller Retainer Ring # CE10981. I have added a link for you to all of our available boat trailer parts so you can take a look.
  view full answer...
• Replacement Wobble Rollers for a LoadRite Boat Trailer
  CE Smith wobble roller set # CE29210 is listed as a direct replacement for the OEM rollers on LoadRite trailers as well as several other makes. These rollers fit 3/4 inch and 1-1/8 inch roller shafts. they have a diameter of 5 inches and are 3 inches wide. The width at the center hub is 1-1/2 inches. I have included a link to a video review for you.
  view full answer...
• What to Measure to Find Correct Ribbed Rollers
  In order to find the correct ribbed rollers for your boat trailer, you will need to measure the diameter of the shaft on the roller bunk assembly. For example, the CE Smith Ribbed Wobble Rollers # CE29210 fit both 3/4" and 1-1/8" roller shafts due to their removable bushings. These rollers are 5" diameter x 3" wide. Another example would be the Yates Ribbed Wobble Roller # YR500YW-8P which is for rollers bunks with a 1" diameter shaft. This roller is also 5" diameter x 3" wide. I've added...
  view full answer...
  
• Are Special Tools Needed to Attach Wobbler Rollers to a Shaft Using Retaining Rings
  I have tried to use channel locks before and they do not work all that well. You need what are called hog ring pliers such as # PTW88003. These pliers also come with fasteners but for boat trailer rollers you would want to use a retainer ring such as # CE10981 as an example.
  view full answer...
• Can Deluxe Roller Bunks be Used to Replace 4 Wobble Type Rollers on Boat Trailer
  You definitely can replace your current 4 wobble rollers like part # CE29210 with the Boat Trailer Deluxe Roller Bunk # DL21740. These can be mounted on top of carpeted or wooden bunks as well as with brackets like the part # DL21742. I have attached a few photos of how these have been installed on different boat trailers that you can reference.
  view full answer...
  
• Dimensions of the CE Smith Ribbed Wobble Rollers # CE29210
  The CE Smith Ribbed Wobble Rollers # CE29210 that you referenced is 5 inches in diameter and 3 inches wide overall. The inside hub width is 1-1/2 inches. This roller is designed to fit 3/4 inch and 1-1/8 inch shafts. I wasn't sure exactly what dimension you are looking for so I tried to provide all of the ones I could think of. I also attached a review video for this product for you to check out as well.
  view full answer...
• Does CE Smith Ribbed Wobble Rollers CE29210 Include Required Retaining Clips?
  The CE Smith Ribbed Wobble Rollers for Boat Trailers - Rubber - 3/4" and 1-1/8" Shafts - Qty 4 # CE29210 you were looking at includes 4 smaller washers, 4 larger washers, and the 4 retaining clips so you do not need to order them separately. I included a video of the # CE29210 for you to take a look at.
  view full answer...
• Do the CE Smith Ribbed Wobble Rollers for Boat Trailers Require Lube
  The CE Smith Ribbed Wobble Rollers for Boat Trailers part # CE29210 don't require lubrication.
  view full answer...
• Replacement Wobble Rollers for LoadRite Boat Trailer
  The center hole of the Yates Ribbed Wobble Roller # YR530R-9P has an inside diameter of just under 1-1/4" which allows it to fit a 1-1/8" shaft. There is also the CE Smith Ribbed Wobble Rollers for Boat Trailers # CE29210 which has removable bushings allowing it to fit 3/4" AND 1-1/8" diameter shafts; these wobble rollers are also direct replacement for OEM rollers on LoadRite boat trailers.
  view full answer...
  
• Troubleshooting Wobble Roller Rollers Not Rolling
  In order to get your wobble rollers rolling again I have two recommendations. The first is to attempt to pull them off and clean them, then use grease to free up the movement. Another possibility is that the shaft is bent. You should be able to bend it back if you find this to be true. If this does not solve the problem you will want to replace them. In order to find a replacement roller you will need to know the diameter of the shaft to make sure it fits. I would also recommend measuring...
  view full answer...
  
• Recommended Boat Rollers for Restoring Boat Trailer
  It sounds like you are needing replacement rollers like the CE Smith Ribbed Wobble Rollers for Boat Trailers - Rubber - 3/4" and 1-1/8" Shafts - Qty 4 # CE29210. If you don't have the wobble style rollers, then I recommend the bunk rollers like the Boat Trailer Standard Roller Bunk - 4' Long- 10 Sets of 2 Rollers - by Dutton-Lainson # DL21754.
  view full answer...
• Locating Replacement Wobble Rollers for 23 Foot Load Rite Trailer
  The closest option we have to the dimensions you listed for your existing rollers is the CE Smith Ribbed Wobble Rollers # CE29210. These will fit your 1-1/8" shaft but they feature a 5" diameter and a 3" width, varying slightly from what you currently have. The slightly larger height/diameter shouldn't be an issue at all but you will just want to make sure you are okay losing a 1/2" of surface contact with the boat with these narrower rollers. Otherwise these will physically fit and work...
  view full answer...

Do you have a question about this Boat Trailer Part?