bing tracking image
  1. Boat Trailer Parts
  2. CE Smith
  3. Winch Stand
  4. 30 Inch Tall
  5. 2 Inch Wide
CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide

CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide

Item # CE31013G
lowest price pledge
Our Price: $75.37
You Save: 9%
Boat Trailer Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 8 lbs
In Stock
Boat Trailer Parts CE31013G - 30 Inch Tall - CE Smith
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos


Need help with installation?
Locate installers near me
This heavy-duty stand gives you the freedom to mount a winch wherever you choose on your trailer's 2" tongue. Its 14 mounting holes allow you to adjust the height of your winch. Made of hot-dipped galvanized, 12-gauge steel. 1-800-940-8924 to order CE Smith boat trailer parts part number CE31013G or order online at Free expert support on all CE Smith products. Guaranteed Lowest Price and Fastest Shipping for CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide. Boat Trailer Parts reviews from real customers.
  • All Info
  • Reviews (39)
  • Q & A (0)
  • Photos
  • Why etrailer?

CE Smith Boat Trailer Parts - CE31013G

  • Winch Stand
  • 30 Inch Tall
  • 2 Inch Wide
  • CE Smith

This heavy-duty stand gives you the freedom to mount a winch wherever you choose on your trailer's 2" tongue. Its 14 mounting holes allow you to adjust the height of your winch. Made of hot-dipped galvanized, 12-gauge steel.


  • Heavy-duty winch stand supports a winch on your trailer's 2" tongue
  • 14 Mounting holes allow you to adjust height of winch during installation
  • Sturdy, hot-dipped galvanized, 12-gauge steel construction
  • Made in the USA


  • Application: 2" trailer tongues
  • Dimensions: 30" tall x 2" wide

This winch stand mounts on your trailer by clamping around the 2" wide tongue. The holes on the base provide multiple mounting options and angles, and the surface where you mount the winch is slightly angled to help with winch operation.

Hot Dipped Galvanized Steel

Hot dipped galvanized steel parts are stamped from a sheet of steel. The edges of the galvanized parts often lose their zinc coating during the stamping process. Because of the thinness of the coating (less than 1 mil) and the fact that the edges remain exposed, galvanized parts can begin to oxidize and rust quickly, so it's recommended that they be primed and painted.

CE31013G 12-Gauge, Galvanized Steel Winch Stand by CE Smith - 30" Tall x 2" Wide

Customer Reviews

CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide - CE31013G

Average Customer Rating:  4.8 out of 5 stars   (39 Customer Reviews)

This heavy-duty stand gives you the freedom to mount a winch wherever you choose on your trailer's 2" tongue. Its 14 mounting holes allow you to adjust the height of your winch. Made of hot-dipped galvanized, 12-gauge steel.


PERFECT. This was exactly what I was looking for and didn't know if it existed. My Kayak Trailer is a bit smaller than regular boat trailers,this extension for my winch means I can Fish for a bit longer without throwing my back out moving my BONAFIDE SS127 around. Thanks for being Forward thinking and helping us in making Kayak Fishing The New Thing. Thanks guys, I will send some pictures of the modification.


This is very sturdy. I put a winch on it to pull a small aluminum boat onto a trailer and have no problems. It does exactly what it is supposed to do. I would buy again but doubt I will have to.

Part looks and works like the day I installed it. Exactly what I needed.
Patrick - 06/09/2022


I haul my whitewater raft (it is a cataraft) on my utility trailer and I needed a winch mount that was strong and gave me some elevation above the trailer tongue. This was the perfect solution. It only took me a few minutes to mount with four 3 inch by 3/8" bolts (not included). This winch mount was inexpensive, simple, feels really solid and seems to be working perfectly. eTrailer is always great to do business with.


Stand is solid and exactly what my husband needed to complete his trailer. Delivery was much faster then I expected as well!


Very good quality. Fits my trailer perfectly. Everything the website said that it was. Delivered three days BEFORE the delivery date!!


This winch stand was perfect for my needs. I had tried fabricating one before I found Sure makes the job easier when you have the right parts.

All working well, thanks.
Kenneth - 01/26/2018


Works great... would be nice to get with hardware to attach it but a great product


This is the third or fourth order I have placed with e-trailer, and each time they have packaged the items correctly and they have been recieved in the suggested amount of time, with no damage or loss; exactly what I ordered. i would highly recommend this company. Roger B.


Customer had an accident and damaged trailer. Winch stand, bow roller mount and rubber bow wedge were all as described fit great and my order was filled and shipped quickly. Very pleased with products and service.


Everything was spotted as promised. The product fit the trailer I am building. Very happy with the product and the purchasing process


As always, and easy, pleasurable shopping experience with etrailer! Not only do they ship out quickly and send you exactly what you ordered, but their customer service and follow up is unmatched!


My boat thanks you.


Solved a space problem with winch post that came on trailer.


This product arrived on time and is just what I need to repair my broken snowmobile trailer. Great communication from George about the timing of shipping.


Seems to be a durable products ( CE31013G) and (CE31005PG) but no installation tips instructions included. No hardware. Should provide hardware size/type information.


Both items were sturdy and fit Perfectly

Very pleased


Part worked as it should. Was a bit tall for my application, but not a serious problem.


This company has the best pricing online and everything u need for a trailer. Will do business in the future. Thanks etrailers.


Much heavier and more stout than expected. Should be able to withstand the hardest hits when driving the boat on the trailer.


The winch stand worked perfect for my trailer that I was setting up for my hobie pa.


Good quality, quick shipment, right price --- Nothing can be better!!!!!!


Product was on backorder. Waited more than three weeks. It was worth it. It was durable, well made except it missed one hole on one side and I have to drill a hole so the bolt can go through from one side to the other.


Excellent quality, heavy solid constru ction


Is exactly what I needed, works perfect ly


Works great for mounting on a raft trailer. Well built will need to finish so it doesn't rust, but otherwise does what it is supposed to.

Show More Reviews

Ask the Experts about this CE Smith Boat Trailer Parts

  • Fit of CE Smith Winch Stand # CE31013G on 2 Inch Wide Trailer Tongue
    The CE Smith Winch Stand you mentioned, part # CE31013PG is designed for 2 inch wide trailer frame members. The stand would fit and work well on your 2 inch wide by 4 inch deep trailer tongue.
    view full answer...
  • How Does the CE Smith Winch Stand # CE31013G Mount to Trailer
    To mount the CE Smith Winch Stand # CE31013G on a trailer requires you to slip the lower portion with the holes drilled through it over the pole tongue of your trailer. The various holes are there to allow you to match the correct height and angle that the trailer calls for. I attached a picture of a similar product that uses basically the same style of attachment to help you visualize how the stand would mount. You would need to provide nuts and bolts that would be long enough to pass...
    view full answer...
    Image 1 for
  • Winch Stand to Install Winch onto Boat Trailer
    It sounds like you're looking for the CE Smith Winch Stand # CE31013G. This is a stand that your winch will mount to anywhere on your trailer's tongue. It gives you multiple mounting angles and options with 14 mounting holes. It fits 2 inch trailer tongues and is 30 inches tall. If you also need a winch or bow stop I've linked our selections for you to take a look at.
    view full answer...
  • Replacement Metal Supports for Winch on Boat Trailer
    It sounds like you are needing a new winch stand that will support the winch on your boat trailer. I recommend looking at the CE Smith Winch Stand # CE31013G. This is a heavy-duty stand constructed of hot-dipped galvanized, 12-gauge steel that will do a great job of resisting rust and corrosion. It features 14 mounting holes to allow you to adjust the height of your winch and is designed to install on 2 inch trailer tongues. The unit measures 30 inches tall and 2 inches wide. I have attached...
    view full answer...
  • Will CE Smith Winch Stand Fit a 2 Inch Wide and 3-1/2 Inch Tall Trailer Frame
    The height of the frame does not matter, just the width. So with a 2 inch wide frame you can install CE Smith Winch Stand # CE31013G.
    view full answer...
  • Availability of Winch Mount for Boat Trailer
    Sounds like you are looking for a winch mount like # CE31013G. The stand is made of 12 gauge steel and measures 30-inches tall. It has 14 mounting holes and fits a 2 inch wide trailer frame.
    view full answer...
  • Weight Capacity of the CE Smith Winch Stand Part # CE31013G
    In order to attach the CE Smith Winch Stand part # CE31013G to your boat trailer you would need to cut off the bottom portion of the stand and weld that directly to your trailer's tongue as it is only designed to bolt onto a 2" wide trailer tongue. I spoke to my contact at CE Smith and they stated that this winch stand has a weight capacity of 1,000 lbs however, this does not mean that the weight of the boat cannot exceed 1,000 lbs as the boat will be considered a rolling load and the...
    view full answer...
  • Picture of CE Smith Winch Stand # CE31013G Installed on Trailer
    I attached a picture that we recieved from a customer that shows the CE Smith winch mount # CE31013G installed and in use on a trailer for you to check out.
    view full answer...
    Image 1 for
  • Size of Mounting Holes on Base of CE Smith Galvanized Winch Stand CE31013G
    The mounting holes on the bottom of the CE Smith Galvanized Winch Stand # CE31013G measure 7/16-inch. Please refer to the linked photo. This 30-inch tall winch stand is made of 12-gauge steel and is intended for 2-inch trailer tongues. It is USA-made.
    view full answer...
    Image 1 for
  • What Kind of Paint Should be Used for Galvanized Steel of Boat Winch Mount # CE31013G
    Most acrylic coatings will adhere directly to cleaned galvanized metal. A weathered galvanized surface develops a layer of white rust, which must be removed to ensure good adhesion of the coating. Wire brushing or scrubbing with a stiff brush or abrasive pad is recommended to remove the white rust. As long as your trailer tongue is 2 inches wide the mount part # CE31013G is going to fit and work well.
    view full answer...
  • Does the CE Smith Winch Stand have a Capacity
    The CE Smith winch stand, # CE31013G, does not have a listed capacity. The stand is made of 12 gauge steel so 500 pounds of weight would not be a problem for it.
    view full answer...
  • Adding a Winch Stand and Bow Stop to a Calkins Boat Trailer
    One of the keys for a winch mount is the width trailer tongue they fit. Mount # CE31013G fits on 2 inch wide trailer tongues so if that is what you have then this is a great option for the trailer and winch.
    view full answer...
  • Winch Stand Compatible with Sled Bed Snowmobile Trailer
    The CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide # CE31013G should work on the center beam based on the measurements you gave. The additional height of the center beam won't be an issue as the width is still 2 inches. Because your trailer is 3-3/4 inches tall, this will required mounting directly to the frame instead of using u-bolts around the frame. You will also want to consider using the Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches # DL24059...
    view full answer...
    Image 1 for
  • Recommended Winch Stand And Mount For 1998 Nitro Boat Trailer
    For your 1998 Nitro Trailer, I recommend the CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide # CE31013G. You can then use the Universal Hand Winch Right Angle Mounting Bracket for Hand Winches by Dutton-Lainson # DL24110 if you want a different mounting for the winch.
    view full answer...
  • Hitch Recommendation for a 2015 Audi Q7 Quattro
    Yes, the Curt Hitch part # 13220 that you referenced has been confirmed to fit your 2015 Audi Q7 Quattro. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow the trailer level,...
    view full answer...
  • How To Extend the Fulton XLT Powered 9K Winch A Few Inches
    I do have a solution for you but the strap cannot be flipped so to speak so that it comes out on the top rather than the bottom in regards to the Fulton XLT Powered Winch with Rugged Strap part # DL25215. I am also not aware of a boat trailer winch the capacity you need with this feature therefore your best option would be to adjust your winch mount to better suite your needs. We do offer the CE Smith Winch Stand part # CE31013G which is 30" tall if needed.
    view full answer...
  • Replacement Boat Trailer Winch for Winch Mounted In Channel On Frame
    I do have plenty of options for you to choose from but finding one that matches what you have exactly is going to be next to impossible unless you were able to find the same model. Therefore, you are most likely gong to need to do a bit of modifications if you want to replace this winch. It looks like the winch mount setup you have now was a one-off for your particular winch model. The Fulton F2 Fully Enclosed Trailer Winch part # FW16000101 has a 6-3/16" long x 3-3/8" wide base but the...
    view full answer...
    Image 1 for
  • Recommended Winch Post/Stand For Boat Trailer With Roller Stop
    It sounds like you are looking for the CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide # CE31013G. This is designed for a 2 inch by 3 inch frame, so you will need to make some modifications. This is the only winch stand we currently carry. You may also be interested in the Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches # DL24059 and the CE Smith Keel Roller Assembly for 2" Wide Trailer Tongues - Galvanized Steel and Yellow TPR # CE32015G.
    view full answer...
  • Will the MaxxTow MaxxHaul Hand Winch Work With the CE Smith Winch Stand
    The MaxxTow MaxxHaul Hand Winch part # MT50156 will work just fine with the CE Smith Winch Stand part # CE31013G. There will be no additional winch mounting plate needed, you'd just bolt the winch base directly to the stand. There are pre-drilled holes on the winch stand which should line up with the holes on the winch but if not you would need to drill a hole or two.
    view full answer...
  • Recommended Winch Stand and Winch for Boat Trailer with Hobie Kayak
    The only winch post option we offer is the CE Smith Winch Stand part # CE31013G which is designed for 2" trailer tongues. This will then allow you to mount a winch like the Fulton Single Speed Trailer Winch part # F142102 which is what I recommend. It comes with the strap pre-installed.
    view full answer...
  • Recommended Winch Stand For Flat Trailer With Single Beam Tongue
    The winch post we offer is part # CE31013G, and the typical installation for this is on a boat trailer. This post measures 30-inches tall and is designed for 2-inch wide trailer frames. It is made of 12-gauge steel and it has 14 mounting holes. I have attached a photo of the winch stand you can check out. There are mounting holes at the bottom of the stand that can be used to attach to your trailer tongue. You can use bolts and just remove the entire stand when you want to carry different...
    view full answer...
    Image 1 for
  • Dimensions of Steel Tubing in CE Smith Post-Style Guide-Ons Kit # CE27640
    I took a walk to our warehouse so that I could measure the dimensions of the L-shaped square steel tubes in the CE Smith Post-Style Guide-Ons Kit # CE27640. These square tubes are separate from the 60-inch PVC pipes that are included in the kit. From the middle of the bend to the end of the horizontal tube the measure is 21-inches. We also offer a similar kit with 40-inch PVC pipes, part # CE27620, and a 60-inch kit # CE27760 that includes LED lights that mount on top of the pipes. A 40-inch...
    view full answer...
  • Strap and Mounting Plate Needed for the Dutton-Lainson Hand Winch # DL14125
    The strap that you will need to use for the Dutton-Lainson Hand Winch # DL14125 is the 2" x 15' Strap # DL6148. The hook on this strap has a safety latch on it to help keep it secured to the load during operation. You will need a 2-3/4" long x 1/14" diameter bolt for this straps to work with this winch though (not included). When it comes to mounting the winch we have the CE Smith Winch Stand # CE31013G but this is used for boat trailers. If you have a utility trailer then unfortunately...
    view full answer...
  • Will The Mounting base for Hand Winch Fit On Boat Winch Support?
    I wouldn't hesitate to add the 2-Speed Boat Trailer Winch with 20' Strap - 2,500 lbs # 315-W2500D to your 3 inch wide trailer winch post. Many of the boat winch posts are not even that wide. For instance the CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide # CE31013G. At minimum two bolts are needed to hold the base, but ideally 3 or 4 could be used on your support to give stability and support to your mount. It will not be an issue to have the base overhang the support.
    view full answer...
    Image 1 for Image 2 for

< Previous

Do you have a question about this Boat Trailer Part?

  • Why

    At we guarantee:
  • Highest quality boat trailer parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate boat trailer part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee DeAnne T
Written by:
DeAnne T
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.