D-L roller bunks provide a quick, easy and inexpensive way to upgrade bunk style trailers to rollers. Attaches directly to vertically mounted 2" x 4" bunk board; mounting bracket, or optional roller bunk bracket (sold separately).
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today were going to review part number DL21755. This is the Dutton-Lainson Boat Trailer Standard Roller Bunk in five foot long sections. These Dutton-Lainson Roller Bunks will provide a quick, easy and inexpensive way to upgrade your bunk-style trailers to rollers. They feature a non-marking two-compound roller which has a durable wear-resistant inner surface and a soft boat cushioning outer surface. These roller bunks are designed to attach directly to your wooden bunks that are two inches wide on your boat trailer. Basically, you would set this on to your wooden bunk and there are holes right here, pre-drilled that you would just mark and then drill a hole through and then use a bolt to attach it to the wooden bunk.
Now if your boat trailer does not have wooden bunks or you want to remove the wooden bunks, you can still use these. What you have to do is use this roller bunk bracket which is sold separately. Its part number DL21762 and you will need at least two of these for each section. And what these would do is where the bolts would normally go through the wooden bunk, you would just put the section that has the hook part on it right in the hole and then the bolt would gone through here and then with this bracket having the slotted holes, you can adjust it and bolt it to your boat trailer and get the correct height you need. This part is constructed of a 14-gauge steel, has a black powdered-coat finish, has a total weight capacity for both of these roller bunks is 3000 pounds maximum and again they are five feet long and they are two inches wide.
The rollers on them are free to pivot and they will align with the boat hull. Each five foot section will have six sets of two rollers so 12 rollers on five foot section and 12 on another one. So over all for both roller bunks, you would have 12 sets of two rollers. This part is made in the USA. That should do it on a review on part number DL21755.
.
Average Customer Rating: 4.7 out of 5 stars (73 Customer Reviews)
D-L roller bunks provide a quick, easy and inexpensive way to upgrade bunk style trailers to rollers. Attaches directly to vertically mounted 2" x 4" bunk board; mounting bracket, or optional roller bunk bracket (sold separately).The paint peeled off the steel in months and when I called customer service they wouldn’t stand behind the product. They said they’re not intended to be in water. Seems a poor choice of materials for Boat trailer rollers that are produced to roll your boat into the water??
5’ roller bunks were shipped in a larger box that was only 58 1/2” long.. rollers were bent at 44”.. called customer service and they are shipping a new set, unfortunately a project is delayed because of an 1 1/2”. Products appear to be of higher quality, just the way it was shipped may need to be addressed. The box the bunks were in was also in a severe state of disrepair, one end appeared to have been torn open along with several other tears in the back that to have originate from poor handling in the warehouse. I have photos however, they will not upload successfully. I will be happy to email them if needed.
I had carpeted bunks on my trailer and always had problems launching my boat due to the dry carpet, I couldn't always submerge the bunks in the water due to the tide. I decided to try the rollers and Wow, what a difference it makes. Easy Off, and On. I have a flat bottom Scooter and I recommend the rollers for easy launching. The materials used are of good quality and the wheels do not mar the fiberglass bottom. Just be sure keep the boat secured until reaching the water because it will roll off, it's that easy to get the boat off the trailer. Thank you Etrailer, you have a good product.
We considered several alternatives for a way to easily move our 15' sailboat out of the water, over our bulkhead and across our dock. The DL21755 roller bunks work perfectly. I can almost move the boat across the dock with one hand. We mounted them on 2x2's that we attached to the dock. We used 2x2's to keep a low profile.
High quality product and the service and prices from etrailer were absolutely fabulous. Rollers arrived in a few days and were packed very securely. We will be doing business again with etrailer!
Thank you
This proudly sits on a trailer with a Avon inflatable one Honda 20 hp engine the trailer bunkers are now downright slippery
Terrific product - But be careful at the ramp! Don't release the winch strap from the boat if the ramp is on a slight incline because the rearward weight of the motor will cause the boat to just fly off the trailer into the water. It happened to me the first time I used it since the installation. It was on a river and the boat started to drift away. Lucky for me a local rescue team was there doing some practice and they retrieved the boat for me. Now I attach a spring shackle, with 1/4" rope attached, to the boat clevis before removing the winch hook. I can gently let the boat slide off the trailer and keep it under control with the rope.
I'm 77 and it was getting harder for me to push the boat off of the trailer if the river was low and equally hard to pull it back onto the trailer at the end of the day. Now it is so simple! I just push the boat out into the flow and when it gets to the center of the trailer I just pull up on the rope and center the bottom of the boat over the bunks. The boat easily comes almost all the way up to the rubber "V" bumper on the trailer. Then it is a simple matter to crank the winch and bring the boat up tight against the bumper.
Easy to install and load, my boat became easy to offload and load. I like!
First off I would like to say that I experienced great customer service throughout my recent orders. I knew that some of my products where back ordered, but I was willing to wait for some of them, others they were able to give me suggestions for in stock items and it worked out perfect. As far as this product goes (which I waited for), I greatly dislike giving reviews right after I receive a product and don't have time to see how it will hold up, but this roller bunker installed very easy and once adjusted worked very well. My old roller bunker started to loose it's wheels (many years old). I only wish I was better prepared, in my head I though I was going to lag screw these in from the top (into the wooden bunker) but after I got the boat off I realized they bolted through the wooden bunker, so I quickly ran down the road and got stainless 3/8 x 2.5" bolts, after that it was quick. If they don't last I will make sure to update my review.
GREAT QUALITY!!!!!
WORK AS DESCRIBED.
The rails and rollers are a great product and arrived on time. The Bunk Style Guides do not have mounting brackets suitable for mounting on a standard boat trailer from Academy which uses Angle Stock aluminum for their frame. The brackets are only useable on square or rectangular frames. I fabricated my on mounting hardware to install them.
Exactly what I needed. Worked perfectl y.
I as of yet not installed my rollers, only because of finding the time to do it. I was however very pleased of the fast delivery. As I inspected the product, I was impressed of the quality of assembly. From what I can tell, I will be quite pleased with the end result.
It was Great.
GREAT SO EASY TO LOAD AND UNLOAD
Works great seems to hold up very well for sitting in fresh water for a year straight. I could not get my wave runner or jet Jon out of the water without them. Great product for a home made ski lift.
the product arrived in record time yesterday and I put them on last night ,they fit great . only problem was that it pushed the boat up anther 3inches in the air , so I have to modify the existing bunk boards to allow it to lower back down at least 1 1/2 more inches and then should slide rite off ,,,,,,,,,,
thanks I really liked your product and service ,
Seems like a great product. Fast shipping! Thanks!
Great product but even greater customer service.
I ordered a set of these and then realized that I needed to also order a trailer coupler. I was pleasantly surprised to be able to call etrailer on a SUNDAY and find a knowledgeable LIVE body to talk to. I successfully revised my order and received all my items 3 days later!
Great customer service.
I love them, I just wish that they came with the needed brackets. You have to purchase brackets as well as any needed screws separately.
Works great seems to hold up very well for sitting in fresh water for a year straight. I could not get my wave runner or jet Jon out of the water without them. Great product for a home made ski lift. Tommy F. Lake Conroe Tx. Ps not sure how to submit picture not computer savvy.
The rollers are great, BUT it's possible they won't fit over existing wood bunks & brackets. I have a load rite bandit trailer and ran into this issue. The resolution was to remove the wood bunks and brackets / install with new brackets, so figure the additional cost when purchasing.
these bunk rollers are a preferred way of allowing your boat to roll on the trailer along with keel rollers instead of a float on. This product is a must for your boat trailer. The one thing I would like to see is that the frame be available in hot dipped galvanized for salt water use.
the roller bunk works well. i had to remove the old bunks (were carpeted 2X4 laying flat) and make new rails the width of the roller bunk channel. i couldn't use the old trailer hardware so i had to improvise. tested new setup this past weekend and they worked very well.
These look pretty rugged and well desig ned.
Do you have a question about this Boat Trailer Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.