Yates Keel Roller for Boat Trailers - Heavy-Duty Rubber - 12" Long - 5/8" Shaft

See what our Experts say about this Yates Rubber Boat Trailer Parts

• Replacement Keel Roller For Boat Trailer Which is 12" Long with 5/8" Shaft and Rubber Donuts on Ends
  It sounds like you have the Yates Keel Roller # YR12000 with 2 of the Yates Endcaps # YR134-5 on a Roller Shaft with Pal Nuts # CE10727A. As I saw you were looking at the TPR Roller # YR1200Y we do have the TPR Endcap # YR135-5Y which you can use with it.
  view full answer...
• Differences between Yates Keel Rollers # YR12000 and # YR12244-125EC
  There is a slight difference in the center channel width between keel rollers # YR12000 and # YR12244-125EC. Otherwise they have the exact same specs. The more narrow center channel on YR12244-125EC means more rubber is used and thus would cost more. It also has a slightly larger diameter, 3-3/4 inches, compared to # YR12000 at 3-3/8 inches.
  view full answer...
• Replacement for 11-1/4" Keel Roller with Shaft and End Caps
  The best size replacement keel roller we have is the Yates Keel Roller for Boat Trailers part # YR12000 for black, part # YR1200B for blue, or part # YR1200Y for yellow which all measure 11-3/4" long with a 5/8" diameter shaft. The correct size roller shaft and end caps to use with these rollers is the Roller Shaft with Pal Nuts part # CE10727A which measures 13" long though can be trimmed down. This length will then allow for enough room to add the thickness of the mounting brackets, the...
  view full answer...
• Diameter of Yates Rubber YR12000 Boat Trailer Keel Roller
  At the narrowest spot in the center, the Yates Rubber # YR12000 Keel Roller is 2-1/4 inches in diameter. At the ends which is the thickest part of the roller, the diameter is 3-5/16 of an inch. For a panel-style mounting bracket, use # CE10305G and for a roller shaft and pal nuts, use # CE10727A.
  view full answer...
• Tips for Removing Pal Nuts from a Boat Trailer Roller Shaft
  It sounds like you have pal nuts, such as # 408600. They may or may not be seized on the shaft. Some penetrating oil and gentle prying should be all you need to get them to come off of the shaft. Using pliers or a similar tool could make the nut tighter on the shaft.
  view full answer...
• Keel Roller to Replace Yates # 12000
  We have exactly what you need. We have the Yates 12000 in black rubber # YR12000, blue thermoplastic # YR1200B, and yellow thermoplastic # YR1200Y. I went to the warehouse and measured one and it's the same as what you provided depending on where you measure from.
  view full answer...
• Are Roller Shafts Included With Yates Keel Roller for Boat Trailers
  The metal shaft does not come included with the Yates Keel Roller for Boat Trailers, part # YR12000. The roller shaft we offer for this roller is part # CE10727A. This is a 13 inch long shaft and it includes 2 pal nuts.
  view full answer...
• Shaft Recommendation for Use with Keel Roller part # CE10727A
  For just the shaft you would want the part # CE10727A to go along with the roller part # YR12000. The shaft comes with the pal nuts as well that secure it.
  view full answer...
• Inside Diameter of YR12000 Keel Roller With Plastic End Caps Removed
  It certainly would. According to Bob Yates of Yates Rubber, the inside diameter of the # YR12000 keel roller is a bit under 1-1/4 inches with the white plastic plugs knocked out. This would be the perfect roller for your needs.
  view full answer...
• Where to Measure to Pick Out Replacement Rollers for a Boat Trailer
  We carry several rollers for boat trailers, but your part number doesn't cross referenced with anything we carry. If you can measure your current rollers I can see what we have that would fit. You will need to measure the overall diameter, the overall length, and the diameter of the hole in the middle of it and then check out the link I attached that has all of the rollers we carry.
  view full answer...
• Keel Roller Recommendation for Centering a 2004 Crestliner on 2004 Karavan Classic 3500 Trailer
  Using a keel roller such as # YR12000 will help to center the boat. The groove in the center and the tapering design will help guide and center the boat on the trailer.
  view full answer...
• Keel Roller Needed 12 Inches Long With 5/8 Inch Shaft To Center Boat
  The reason why you can't find the Husky Self-Centering Keel Roller - Polyvinyl - 12" Long - 5/8" Shaft - Black, YR87169 is because it has been discontinued. You may want to consider a simimilar roller like the Yates Keel Roller for Boat Trailers - Heavy-Duty Rubber - 12" Long - 5/8" Shaft, # YR12000. This roller is a direct replacement for rollers that fit standard 12 inch brackets with 5/8 inch diameter shaft. It will ease loading and unloading of your boat and absorb road shock while...
  view full answer...
• Replacement Boat Trailer Keel Roller and Bracket for 1996 Calkins Boat Trailer
  The linked page will show you all replacement keel rollers which are offered in both black rubber and non-marking thermoplastic varieties. You can use the filters on the page to narrow the results based on your preferred type and roller length, which ranges from 5- to 18-inches. The internal shaft diameter of all rollers we offer is either 5/8-inch or 1/2-inch so you'll want to check your existing bracket if it will be re-used. We also offer complete roller-with-bracket assemblies, shown...
  view full answer...
• Weight Rating of Yates Rubber # YR12000 Keel Roller
  A Keel Roller like the # YR12000 doesn't carry a weight rating because it's not meant to bear the full weight of the boat. They're meant to protect the keel of the boat from hitting into anything on the trailer. If you're bending the roller shaft, then the roller is sitting up too high or you need to raise the bunks so that not so much weight is resting on the roller.
  view full answer...
• Center Diameter of Yates Keel Roller for Boat Trailers
  The diameter at the center of the Yates Keel Roller for Boat Trailers # YR12000 is 2-1/4".
  view full answer...
• 7-3/8 and 11-3/8 Inch Keel Rollers for a Caulkins Boat Trailer
  There are some common size rollers found on boat trailers but really they can be just about any size. Roller # YR8000 has an overall length of 7-3/4 inches so it would fit in the 7-7/8 inch spacing. It fits on a 5/8 inch diameter shaft # CE10725A. Roller # YR12000 is actually 11-3/4 inches long and so it would fit the 11-7/8 spacing of your brackets. It also fits a 5/8 inch diameter shaft # CE10727A. I have linked video reviews of both rollers for you.
  view full answer...
• Replacement Keel Roller Assemble For a Boat Trailer Using Rollers on 1-1/4" Shaft
  The only type of roller we have that fits a 1-1/4" shaft is the Yates Ribbed Wobble Roller # YA72FR. You can replace your rollers with the CE Smith Deep V Keel Roller Assembly # CE10455G. This 12" roller uses a 5/8" shaft and has a non-marking thermo-plastic rubber construction for increased life.
  view full answer...

Do you have a question about this Boat Trailer Part?