bing tracking image
  1. Brake Actuator
  2. Dexter
  3. Electric-Hydraulic Brake Actuator
  4. Disc Brakes
Dexter BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit - 1500 psi

Dexter BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit - 1500 psi

Item # T4813102
Retail:$1,420.04
Our Price: $982.24
You Save: $437.80
Brake Actuator
This item qualifies for Free Shipping
Shipping Weight: 16 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Get the best in brake actuator technology with the BrakeRite Plug and Play. No hardwiring. System combines the response time and effectiveness of electric brake controllers with the power of hydraulic actuators for the fastest, safest stopping. 1-800-940-8924 to order Dexter brake actuator part number T4813102 or order online at etrailer.com. Free expert support on all Dexter products. Great prices and Fastest Shipping for Dexter BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit - 1500 psi. Brake Actuator reviews from real customers.
  • All Info
  • Reviews (18)
  • Q & A (0)
  • Photos
  • Why etrailer?

Dexter Brake Actuator - T4813102

  • Electric-Hydraulic Brake Actuator
  • Disc Brakes
  • Dexter

Get the best in brake actuator technology with the BrakeRite Plug and Play. No hardwiring. System combines the response time and effectiveness of electric brake controllers with the power of hydraulic actuators for the fastest, safest stopping.


Features:

  • Electric-over-hydraulic brake actuator mounts on trailer and plugs into 7-way trailer connector
    • Electric current runs to actuator when tow-vehicle brakes are applied
    • Signal triggers pump and motor on actuator, activating trailer brakes
  • Actuator is compatible with most in-cab brake controllers
    • Brake controller (sold separately) is required to send signal from tow vehicle to trailer when brakes are applied
  • Pump-and-motor-based system increases response time compared with traditional hydraulic actuators
    • Trailer brakes are triggered when you apply brakes in tow vehicle, as opposed to when trailer pushes against hitch ball
  • Electronic, proportional pressure valve ensures that braking is smooth and effective
    • Controls braking pressure during long-term braking
  • Fluid reservoir is isolated and has diaphragm-type filler cap to prevent spills and leakage
  • Integrated, weather-sealed connectors make installation a snap
  • Quick, easy connecting every time with plug-and-play design
    • Plug-in harness - no hardwiring required
    • Additional plugs connect to vehicle battery and breakaway switch
  • Potted hybrid circuitry provides dependable service even under adverse conditions
  • BrakeRite, wiring harness, breakaway switch and breakaway battery harness included (battery sold separately)


Specs:

  • Application: disc brakes
    • Compatible with drum brakes when used with optional reducer (T4844100 - sold separately)
  • Vehicle requires an in-cab electric brake controller and 7-way (blade style) trailer connector mounted near bumper (sold separately)
  • Max output pressure: 1500 psi
  • Ford and GM trucks with factory brake controller require adapter (T4845900 - sold separately)
  • Includes:
    • Breakaway battery harness
    • Battery switch harness
    • Standard 7-pin harness
  • 1-Year warranty


With a faster response time and more proportional braking than traditional, surge-type actuators, the BrakeRite is perfect for nearly any towing application, from light to heavy duty. The system works with most in-cab brake controllers to sense when and how you apply the brakes in the tow vehicle. An electrical signal is then sent to the actuator to trigger its pump and motor. Brake fluid is released and sent to the trailer brakes to activate them. The result is real-time braking that, thanks to the electronic, proportional valve system, is also smooth and controlled.



K68-001-11 Dexter Axle BrakeRite 1 Plug-n-Play Electric-Over-Hydraulic Actuator

Replaces Titan 4835700, 4813102PP, and 4813100





Customer Satisfaction Score:


Customer Reviews

Dexter BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit - 1500 psi - T4813102

Average Customer Rating:  5.0 out of 5 stars   (18 Customer Reviews)

Get the best in brake actuator technology with the BrakeRite Plug and Play. No hardwiring. System combines the response time and effectiveness of electric brake controllers with the power of hydraulic actuators for the fastest, safest stopping.

by:

E trailer came through with limited quantities of eoh activator kits when no one else had them.
And a real person tracked my order and send me emails about status




by:

great product. good value.




by:

i used the same unit on my old trailer. installing this one on my new boat trailer, they work great




by:

Great kit and value. Wish including battery & box for simple but see why as some may want bigger battery




by:

Expensive but worth every penny! Works like a charm, it does have a whining sound when in operation, this includes stop lights, you'll sit there with a constant buzzing, it's not super loud but noticeable. I have mine installed in a tongue tool box to protect from theft and weather so the sound is muffled. The extra safety and braking performance is worth though!




by:

The actuator kit has really worked well! Installation was straight forward, and the system has worked great on my boat trailer. Far better than the original surge brake system.




by:

Nice to have real brakes on the camper.

Titan
has a great tech help line. I explained the problem i was facing and was given 2 things to verify. Less than 5 minutes of trouble shooting and I had it working just like it is supposed to. Not only did they help me solve my problem, but I was emailed a revised owners manual and field trouble shooting guide.

Great products and great CS from titan




by:

Thanks for getting our alternative parts out to us. etrailer is one of my best vendors!!




by:

Purchase this product a few years ago. Unfortunately, it accidentally got damaged in an accident. It worked so well that my customer asked to order the same for replacement.




by:

Nice quality




by:




by:




by:




by:




by:




by:




by:




by:



18
18

See what our Experts say about this Dexter Brake Actuator

  • Can the Titan BrakeRite Electric-Over-Hydraulic System be Power Washed
    The housing for the Titan BrakeRite electric-over-hydraulic systems is water resistant, but it is not water proof. I recommend staying away from the unit as much as possible when power washing because the circuit board inside the unit is only protected by the white plastic cover. If you want to design a housing around the unit, you will want to design a unit that still allows for air flow. There is a circuit board, a pump motor and electronic connections contained within this unit and...
    view full answer...
  • Should Electric or Hydarulic Brakes be Used on a Boat Trailer
    For any marine application I strongly advise switching to hydraulic brakes. You cannot seal out water completely and at some point they are going to short out if you keep using electric brakes. To avoid that headache you can switch to hydraulic brakes. There are a few parts you will need to make the switch: The correct brake assemblies Hub and Drum if yours are not hydraulic compatible Actuator Brake line kit Or you could add disc brakes: The correct rotor and hub assembly Actuator Brake...
    view full answer...
  • Troubleshooting Titan BrakeRite EHB Electric-Hydraulic Disc Brake Actuator # T4813102
    The Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit # T4813102 should not continue to apply hydraulic pressure after its 12-volt power feed has been cut. It might take a bit of time for the hydraulic pressure to fade completely but certainly the disc brake calipers should eventually relax their grip. My contact at Titan has provided me with the correct testing procedure for this unit; this will be sent to you in a separate email.
    view full answer...
  • Where Do I Run the Wiring for Titan BrakeRite I Electric-Hydraulic Actuator in Plugnplay Brake Kit
    The only hardwire connection that will need to be made for the Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit, # T4813102, is to a 12 volt DC battery with a minimum rating of 10 amp hours. All of the other components in the system use plug-in connections and connect to each other. I am including a video that explains how this system is set up. This system will not have any affect on your trailer's wiring set-up or junction box.
    view full answer...
  • DOT II or DOT III Brake Fluid for the Titan BrakeRite EHB Electric-Hydraulic Actuator # T4813102
    DOT III would be the correct brake fluid to use with theTitan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit # T4813102. DOT II is typically used in drum brake applications so I would not recommend it with this system since this actuator is designed for disc brakes.
    view full answer...
  • Will the Titan BrakeRite EHB Electric-Hydraulic Actuator # T4813102 Work with Triple Axle Trailers
    Yes, the Titan BrakeRite EHB Electric-Hydraulic Actuator for Disc Brakes, # T4813102, is compatible for triple axle disc brake setups.
    view full answer...
  • Electric Over Hydraulic Brake Actuator Adapter Not Working on 2008 Ford Super Duty Brake Controller
    First, make sure that the adapter #T48456000, is wired into the input wires on the BrakeRite EHB. White to white and blue to blue. The adapter is simulating the load of brake magnets so that the brake controller thinks there are just electric brakes on the trailer. I think the key here is where you have the white wire attached. Since these system ground in more than one place you may need to move the white wire to an alternate ground wire in the system. The old way this was done was to...
    view full answer...
    Image 1 for
  • Can Synthetic Brake Fluid be Used in a Titan BrakeRite II Severe-Duty Electric-Hydraulic Actuator
    Yes, DOT 3 synthetic brake fluid would work just fine in the Titan Electric Over Hydraulic Actuator part # T4813102 that you referenced.
    view full answer...
  • What Brake Fluid Should Be Used With Titan BrakeRite EHB Actuator For Disc Brakes
    I just called my contact at Titan and they told me that you should never use the DOT 5.1 fluid. They said if DOT 5.1 is used it will reduce the life of the seals in the unit by about 75 percent. They told me that there is a typo in the instructions and DOT lll brake fluid should be used.
    view full answer...
  • Is Titan BrakeRite EHB Actuator # T4813102 Compatible w Integrated 2012 Ford F250 Brake Controller
    Since the integrated brake controller of your 2012 Ford F-250 has an electric over hydraulic mode the Titan BrakeRite EHB Electric-Hydraulic Actuator # T4813102 that you referenced would be compatible with it and would not require the use of an adapter.
    view full answer...
  • What Type of Brake Fluid Should be Used in the Titan BrakeRite Electric Over Hydraulic Actuators
    You can use DOT III brake fluid in the Titan BrakeRite electric over hydraulic brake actuators such as # T4813102. Some of the newer fluids cannot be used because the seals in the actuators will start to break down. And you don't want that!
    view full answer...
  • Why Do Trailer Brakes have to be Bled After 100 Miles Using the Titan Brakerite EHB
    After a certain amount of use after the initial installation you will want to bleed the brakes again to ensure that there is no air in the system and that everything is still working properly with the Titan BrakeRite # T4813102 and the brakes. After that you would just follow a regular maintenance schedule.
    view full answer...
  • Should Trailer Brake Pads Fail After 3 Years
    It is possible that your brake pads could fail after 3 years depending how often you use the trailer, Basically different applications, loads, driving styles and other factors have an effect on how quickly brakes will need replaced. Adjust the brakes every 3,000 miles or when there is a question in the brake performance. For a saltwater marine environment stainless steel brake components, not aluminum, are the best possible option for durability and corrosion resistance. Although they...
    view full answer...
  • Brakerite EHB Actuator Recommendation for Trailer with One Bleeder for All Calipers
    As long as you can effectively bleed the brakes of the disc brakes on your trailer the Titan BrakeRite EHB part # T4813102 that you referenced would work just fine. What you have is an uncommon setup, but as long as they are trailer disc brakes that are designed for 1,500 psi this actuator would work just fine. You would just need to bleed your entire system through the one bleeder. Saltwater can be pretty damaging to metal parts, without knowing anything else about your setup it wouldn't...
    view full answer...
  • How to Bleed Electric Over Hydraulic Trailer Brakes Using Titan EHB Actuator
    Below are the bleeding procedures for the Titan electric over hydraulic brake actuator # T4813102. I have also linked the manual. Fill reservoir and Bleed the brakes: Upon initial verification of the electrical system remove one of the filler caps and fill the reservoir to within 3/8 inches of the filler cap opening (there are two filler caps on the reservoir, either may be used for filling and checking fluid level as they both enter a common reservoir). Fill the reservoir with NEW DOT...
    view full answer...
  • After Sitting for 1 Year Cargo Towing Solutions Hydrastar Actuator Will Not Work, Just Clicks
    Below I have included the basic troubleshooting steps for the Cargo Towing Solutions Hydrastar actuators. Unit will not run or the unit will not shut off: Verify that the trailer and tow vehicle are wired according to the electrical schematic shown in the manual. Perform the following checks to determine if the unit is functioning properly: Step 1 With the unit running and brake pressure applied, determine that a minimum of 8.5 volts DC are reaching the Hydrastar's black wire. Check...
    view full answer...
  • What is the Response Time for Titan BrakeRite Electric Over Hydraulic Actuators
    The Titan electric over hydraulic brake actuators including # T4813102 take 0.3 seconds to get to 200 psi and 1.1 seconds to get to 90 percent of their full rated pressure which would be 1,350 psi for the BrakeRite EHB # T4813102. This is about as fast as you're going to find for an electric over hydraulic actuator. If you converted that to an electric system it would be faster.
    view full answer...
  • Can a Surge Brake Coupler Be Used with an Electric Over Hydraulic Brake System
    If you lock out your surge actuator you could still use it with your Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit part # T4813102. It would be just a matter of finding an appropriate place to mount the unit. People do this pretty frequently. Usually on the side of the actuator there is a an area where you can run a bolt through the actuator to prevent the actuator from moving. Without knowing what coupler you have it's hard to say exactly what you would need to do. Without...
    view full answer...
  • Motor Runs on Brake Rite EHB Electric Over Hydraulic Actuator but Does Not Build Pressure
    It sounds like the motor is running but not building pressure. This could indicate a leak somewhere since you have a full reservoir. The next thing you can do is bleed the brakes to ensure the system is free of air in the lines. I have included a picture of how the EHB should be wired. The black and purple wires in the diagram should have 12 volt power. The blue wire should have power when the brake controller is activated. Check the breakaway switch and battery to make sure they are...
    view full answer...
    Image 1 for
  • Where Should the Titan Electric Over Hydraulic Trailer Brake Actuator be Placed on a Trailer
    The placement of the actuator, # T4813102, is up to you. What is going to be best for disc brakes when they are 40 feet away and the actuator is mounted at the front of the trailer is larger brake lines. Larger diameter brake lines will provide better response time. The instructions, which I will send to you in a separate email, cover the installation method and locations. But you can also install it closer to the axles if you want. I have included a link to an FAQ article that should...
    view full answer...
  • Is the Titan BrakeRite Waterproof
    In order for something to be waterproof it needs to be able to be submerged under water for a certain amount of time and not allow any water in. I spoke to my contact at Titan and he informed me that the Titan BrakeRite EHB Electric-Hydraulic Actuator is water resistant, but not water proof. What this means is that as long as you do not submerge this unit under water you should be fine. It will withstand rain but you would not want to let it get submerged. These get used on boat trailers...
    view full answer...
  • Titan EHB Electric Over Hydraulic Actuator Will not Pressurize
    There are a few different issues that could cause your Titan EHB actuator to not build pressure. The first and easiest things to check is the ground connection and fluid level. A poor ground is the most common cause for electric-over-hydraulic actuators to fail. The actuator should be grounded to a 12 volt battery, not the trailer frame. The trailer frame is not a suitable ground location for this actuator. If you adjust the ground connection and the unit will still not pressurize, you...
    view full answer...
  • Can the Titan BrakeRite Electric Over Hydraulic Actuator be Submerged Underwater
    Installation location of the Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit, # T4813102, is at the discretion of the installer. However, you do not want to submerge it underwater so it would be a good idea to move it forward if at all possible. The cover on the system is not 100 percent water tight so it you can keep it out of the water that would be ideal. I have included a link to the installation details for you.
    view full answer...
  • Can a Trailer Use Both a Brake Actuator and Electric Brakes
    A trailer can have electric-over-hydraulic brakes. This system will use an electric brake controller to send a signal from the tow vehicle to an actuator when the brakes are applied. The signal triggers the pump and motor on the actuator and activates the trailer brakes. The actuator on an electric-over-hydraulic will look like the Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit, part # T4813102. It will not look like a brake actuator coupler that is used on surge brake...
    view full answer...


< Previous
123. . .12



Do you have a question about this Brake Actuator?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate brake actuator information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Written by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Manda E
Updated by:
Manda E
Employee Carrie F
Updated by:
Carrie F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.