Don't Miss These Holiday Savings!
Electric-hydraulic brake actuator with brake lines lets you use an electric brake controller from inside your vehicle to adjust and control your trailer's hydraulic brakes. Enjoy convenience as you achieve greater braking control and performance.
Features:
Specs:
Hydraulic Line Kit:
Note: Do not powerwash unit or take it through a commercial car wash.
Constructed of tough, weatherproof extruded aluminum, the Hydrastar electric-over-hydraulic brake actuator will give you years of trailer-stopping performance. The actuator installs on your trailer, then splices into its wiring and connects to its hydraulic brake line. Reacting to electric signals sent from your in-cab electric brake controller when you apply the brakes in your tow vehicle, the Hydrastar applies pressure to the hydraulic system, thus activating the trailer's brakes. You get responsive hydraulic braking, which you control conveniently from inside your vehicle with your electric brake controller. The Hydrastar actuator meets all Department of Transportation regulations and complies with CFR-393 federal braking requirements.
Not all electric brake controllers work with this hydraulic brake actuator. See the following table to determine compatibility with common models of electric brake controllers. Certain models require the Hydrastar control adapter module (HBA-CAM; sold separately) to work with the Hydrastar electric-over-hydraulic brake actuator. For best performance, it is recommended that you use an aftermarket electric brake controller rather than an OEM factory-installed controller.
Application Table
| Manufacturer | Vehicle Years/Controller Models | Compatible | Compatible if Used with HBA-CAM | |
|---|---|---|---|---|
| Vehicles | Ford | 2005-2006 | Yes | |
| 2007-2008 | No | Yes | ||
| 2009-2015 | Yes | |||
| Dodge | 2010-2015 | Yes | ||
| GMC/Chevy | 2007-2015 | No | Yes | |
| Brake Controllers | Drawtite | 5500 Activator II | Yes | |
| 5510 Activator II | Yes | |||
| Hayes | 81741B Energize III | Yes | ||
| 81760 Engage | Yes | |||
| 81792K G2 | Yes | |||
| 81725 Syncronizer | Yes | |||
| 81770 Endeavor | Yes | |||
| Hopkins | Impulse Digital 47325 | Yes | ||
| Insight 47297 | Yes | |||
| Brake Force 47225 | No | |||
| Reliance 47284 | No | |||
| Agility 47295 | No | |||
| Maxbrake | Brake Controller | Yes | ||
| Redneck | Redline TA900 | Yes | ||
| RedlineTA900A | No | |||
| RedlineTA1000 | No | |||
| RedlineTA1100 | No | |||
| RedlineTA1200 | No | |||
| Tekonsha | 90185 Prodigy | Yes | ||
| 90885 P2 | Yes | |||
| 90195 P3 | Yes | |||
| 90160 Primus IQ | No | |||
| 9030 Voyager | Yes | |||
| Valley | VA32812 Blackbird | Yes | ||
| VA32811 Phantom | Yes |
Table applies to HBA-10 with serial numbers 313800 and higher and HBA16 with serial numbers 506100 and higher.
To install the brake line kit on a tandem-axle trailer, the brake lines should be installed as detailed in the above diagram.
Average Customer Rating: 4.7 out of 5 stars (17 Customer Reviews)
Electric-hydraulic brake actuator with brake lines lets you use an electric brake controller from inside your vehicle to adjust and control your trailer's hydraulic brakes. Enjoy convenience as you achieve greater braking control and performance.
Absolutely amazing. All the precision control of electric brakes with the advantages of hydraulic disc brakes. It was a relatively straight forward installation. I paired the Hydrastar actuater with Kodiac 4 wheel disc brakes. My boat and trailer weigh about 9,500 pounds. I've never had braking in a trailer this good before. I actually had to turn the sensitivity down on the cab controller. Totally worth it. I highly recommend the Hydrastar actuater, especially when paired with Kodiac 4 wheel disc brakes.
These are the pics I took when I was done. Took two days to do but we'll worth it. I took pics after first load and now it feels good to actually stop with out wondering if the magnets were going to fail. I appreciate the fast shipping . The only thing I had to pick up was 25 feet of brake line,15 feet was not going to be anough . Other then this. I love it. Thank you very much and God bless
Installed on my 2009 Keystone Fuzion FZ302. I was very impressed by the fit and finish. What a difference in braking!! I don't think I will ever own a trailer with electric drums again. I was able to install all four in about 6 hours. This was taking my time to ensure all clearances were exact. The only thing I ran into was the sticky weights on my 16" wheels just touched the caliber. I had the wheels rebalanced with clip weights on the inside and we are now all good.
In the video the last box is the one with the hydraulic pump, the only one that had no damage because it was well packed, good job
Installation went easy after watching their installation video brake lines were easy to install had to purchase extra fittings (purchased through E TRAILER) to make it fit the way the way needed
Parts look good only 2 bolts missing
Great Product, I installed a four disc brake system in one afternoon and the pump works great. Now my 40ft. trailer stops my truck.
very easy to install , well build . But need to by extra fluid lines, 40 feet trailer will need more fluid line.
Pretty easy installation
One year in and still no problems and functioning great.
great, it fit perfectly
Do you have a question about this Brake Actuator?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.