To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This sturdy steel replacement bumper has a diamond tread surface to provide grip as you step into your truck bed, built-in hitch ball holes, and a 3,500-lb capacity. Powder coat finish resists rust. Custom mounting kit included.
Features:
Specs:
Constructed of high-strength steel, this rugged utility bumper is sure to last. The black powder coat finish helps to resist rust and corrosion while also providing sleek styling. And the ribbed face improves both the appearance and the strength of the bumper.
The diamond tread design on the top of this step bumper provides a tough, non-slip surface for you to easily climb into and out of your truck bed.
Designed to meet or exceed the towing capacity of your vehicle's factory bumper, this Fey Diamondstep bumper can haul up to 3,500 pounds when you add on a hitch ball (sold separately), which must have a 3/4-inch-diameter shank.
California residents: click here
Average Customer Rating: 4.5 out of 5 stars (314 Customer Reviews)
This sturdy steel replacement bumper has a diamond tread surface to provide grip as you step into your truck bed, built-in hitch ball holes, and a 3,500-lb capacity. Powder coat finish resists rust. Custom mounting kit included.The bumper seems to be good quality but it arrived with scratches on the side from shipping. Also one of the light bulbs was broken in the bag.
Recieved my bumper on the date expected. The bumper came in a nice box with plenty on protective wrap and all the necessary hardware. Directions were simple read understand and the bumper was installed in 15 minutes without any problems. Everything in the description came with the bumper also. I would recommend this bumper and or buy another if needed in the future. My truck is a 1992 jeep comanche. Very happy with this bumper kit.
Fit perfectly on my 1989 Jeep Comanche. Sturdy and attractive, I haven’t towed with it yet, but I won’t hesitate to pull light loads.
Payment and delivery have always been flawless as far as etrailer.com is concerned.
The bumper I ordered, unfortunately, was bent towards the ends of either side of the step (top portion with diamond tread). I will try to flatten the bent areas with a dead blow hammer and hope this doesn't crack the paint.
Another point to be aware of is that the welds between the top and body of the bumper are tab welds from the rear (the welds are not continuous). This leaves an open seam between bumper parts where they meet on the external face of the bumper. To address eventual water/dirt penetration of this seam, the manufacturer filled the seam with silicone caulking..which was then painted black to match the bumper.
The bumper came with a installation kit (brackets), which should make mounting on my truck a breeze.
So, bottom line: A cheaply made bumper that will do for a while given the price. If I get 4-5 years out of it, I will be more than pleased.
Overall I am pleased with my purchase and would recommend the bumper.
Very good bumper not installed yet .very fast shipping .brackets wiring lights as well as bolts were in package packed very well.going to install it on 1988 Jeep Comanche.
Had it installed as was needed to pass inspection and it works fine - no complaints
Thanks
Arrived a day early. Both boxes arrived together. Everything was in good shape. I was pleased. There was no damage. The sales person did everything he said he would do. I would order from him again. The only reason I only gave 4 stars is because I will do another review after I install the bumper. I will take pictures and let you know how it fit.
Great product and excellent early deliv ery
I am very impressed with this bumper. I bought it as a replacement for my 77 Ford F150. I've been restoring this truck since 2006, and the original bumper was too far gone to save. I was trying to match the original as closely as possible and this one was perfect.
It came with everything needed, right down to the license plate lights and bulbs. It was easy to install with the supplied directions and it looks great on the truck! Good price, free shipping, and very good quality. Five stars all day long.
bumper delivered but no brackets and was told they may not come for another 3 months so I shipped bumper at my expense and restock charge
Bumper installed easily and looks great. Frame bracket holes lined up perfectly, and the bumper lined up on the brackets with very little effort. It took me about 1 hour to remove the old bumper and install the new bumper. Recommend having an assistant to at least help hold the bumper while lining the bolts up. It is exactly what I expected. The safety chain holes are a bit further from the edge than my old bumper, but I picked up two shackles and that issue was resolved.
I ordered the bumper and mounting hardware and it all came quickly. It took me less than an hour on the install and everything was still in good condition with no scuffs or scrapes. Has looked good since and the plate lights still work
finally got chance to install bumper on truck. the installation was rather simple a little akward for 1 person to do but I was able to install it fairly easily. This bumper is a great fit on my truck. The only fault I found was my truck had factory reciever hitch, so had to remove a bracket holding hitch to install bumper otherwise the bumper fit nicely. I would recommend this product to others. Attached are some before and after pics.
WE ARE MOUNTING IT NOW AND IT LOOKS GOOD. IT DID ARRIVE WITH MINOR DAMAGE. THE TOP DIAMOND PLATE WAS LIFTING OFF THE CENTER OF THE BUMPER.WE WERE ABLE TO REPAIR IT.
My Westin Diamondstep Replacement Bumper was installed almost flawlessly by a good friend. It arrived in perfect condition, and even had a replacement license plate light kit included that I wasn't aware of. As you can see from the photo, my new Westin Diamondstep Replacement Bumper looks great installed on my 1999 Dodge Dakota. If you are looking to replace your rusted out rear bumper, the Westin Diamondstep Replacement Bumper is a good choice.
They replaced a damaged bumper from shipping. The transaction was easy and quick!
Received the item just in time to put it on the truck. Both the price and service advisors are great. Will deal with again should I need other parts.
The bumpers exterior box was badly damaged and torn. The bumper came in good condition but we had to straighten one corner of the bumper that bent during shipping. Thanksfully we have an Auto Body Shop.
1997 Ford F-350 XL 4x4 - Great bumper and excellent customer service from etrailer. My truck has the 37" width frame so you have to flip the mounting brackets so they are narrower to the bumper. Everything bolts directly on, no drilling.
Great product, especially for the price. Instructions and videos were good also. the only issue I had was the holes didnt line up perfectly on the frame, even though I had the exact year make and model of truck that the bumper was for. I had to drill one hole in each side of the frame to get a third bolt in (the rear bolt in the picture) and strengthen in up a bit. Id highly recommend this product and etrailer as well. Good experience!!!
These are EXACTLY what I wanted for my 1970 C-10. However they do not fit. I understand it is a universal fit, but that is why they ask for the year so they can give you the correct brackets. Their response was "Your only other option would to have something or brackets fabricated to fit your specific vehicle." The whole reason I bought them was because they were supposed to fit. Maybe once I spend $[XX] in parts trying to figure it out and cutting into my truck! I will feel different, but i would have rather spent more money upfront and not have the headache.
The new bumper arrived yesterday (very fast). The box was unfortunately very damaged and had been taped. I have attached pics of how it arrived.
I opened everything and amazingly all the parts are here.
The bumper did sustain a minor scratch but is not damaged or twisted.
I have not try to install this yet so with the minor damage shown how should I proceed?
The quality is very good for the price! The only thing that need to be corrected are, the instructions show mounting the mounting brackets opposite of how they actually mount and bolt to the bumper. The higher hole goes to the inside not the outside. The only other thing that needs changed, is the length of 2 of the standard bolts in the kit. 2 of them are very hard to get the thread started with both a flat and lock washer. Other than that, this is a nice product at a nice price point
Do you have a question about this Bumper?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.