In-stock alternatives that can ship today
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. Winding handle included.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Michael: Hi there. I'm Michael with etrailer.com. Today we're going to take a quick look at the Ark Drop Down Corner RV stabilizing jack kit. This kit is going to come with two of these jacks, as well as a winding handle to raise and lower them. These jacks are stabilizer jacks so they're going to allow your chassis to move less. Once you get to your destination, you'll lower these down, and they'll give you a little bit more stability for your camper so that you're not having that rocking sensation as you're moving around in your camper.
These are not designed to lift any weight, so they're not going to be lifting jacks. So keep that in mind, make sure that you're getting the right jack for your needs.These jacks are really nice. One thing I like about them, they have these nice wide feet so even if you are setting up on soft earth, they're not going to sink in. They're about 6" wide by about 6" tall, so nice wide foot there. They do pivot so even if you are setting up on un-level ground, these will accommodate so that you always have sure footing there.
As far as our height goes, when we have it fully retracted like it is now, it sits about 16 and a half inches. So pretty compact, easy to transport. And then when we have it fully extended it's right about 24 and a half inches. It's right about 2ft in total height so you can see the difference between our extended and retracted options there. As far as getting these mounted in place, it's going to be very...
there's a lot of options for you.So this plate up here that I'm going to take off real fast, this is your weld-on plate. It's connected with these long bolts. This can be welded onto the chassis of your camper. That way, if you ever need to take the jack off, if something we're to.. one of the components we're to fail or something, you need to replace the jack, you can just remove those bolts and remove the jack from that weld-on plate.
You won't have to worry about breaking your welds or anything like that. Alternatively, if you don't like welding, you can just discard this weld-on plate and then drill a couple of holes in the top of the jack there and bolt this in place. So either option will work. Just a matter of preference, up to you which one you prefer. But once you have this plate where you want it, it is very easy to put these bolts back in and get those nuts on the end. They tighten down with a 13mm wrench and socket.Another really nice feature is this adjustable mechanism here. So it's got a nice wide handle, very easy to grip, and then you simply pull back on it. It's spring-loaded so those pins will disengage and it will allow this head to pivot. There's multiple locations that it can lock into to maximize the angles that you're working with. But then when you want to retract it, put it away, it will sit up there like that. So once you have this welded in place, this will be sitting parallel to your chassis. So it will sit up nice and tight. And you can see that our foot here does automatically drop down like that. But as you're traveling down the road, it might bounce around a lot. One of the nice features of this, you can close the handle to get access to your port here. And if you retract this enough it will lock that foot in place so that it's not going to wobble around and move. I could actually probably tighten that down just a little bit more.But you also have these pads on either side that are going to help prevent that metal-on-metal contact. So even if this is just a little bit loose, it won't make as much noise. So that will help as we're traveling down the road, not having to worry about the noise that's rattling around down there because there won't be any. This does have a black powdercoat finish to it. So it's going to be nice and rust and corrosion-resistant. So it should do a good job, hold up well for a long time. And this handle is very easy to use. Just as you've seen me do, just get it in place there. It's got a twisting knob on the end and then a grip here in the middle. So very easy to extend our jack and retract it again.So if you're looking for a stabilizing jack set I'd say this is going to be a great option for you. It's got a lot of nice features to it and the weld-on plate or bolting-on option should fit for just about any application out there. So that's going to complete our look for today. This set is the 2ft set. There is a slightly larger set as well that we have available here at etrailer.com. So if this isn't going to extend as far as you need it to I'd recommend you checking that one out, it might better suit your needs. So that's going to complete our look for today. Thanks for watching. Again, I'm Michael with etrailer.com and we'll see you next time.
Average Customer Rating: 4.8 out of 5 stars (42 Customer Reviews)
Minimize chassis movement in your camper with this stabilizer kit. Corner steadies have locking swivel brackets and large grip handles for easy swiveling. Large, flat, load-bearing feet are ideal for soft ground. Winding handle included.The Jacks were delivered on time, will not hesitate do buy again from etrailer.com.
These stabilizers are exactly what I needed for a class C camper. Installation was exactly like your tech video described. Etrailer is awesome, thanks!!
These jacks work exactly like they should. I think it was a very good investment for my 34 foot bumper pull camper. Highly recommended!
Great thank you exactly what I needed.
Review from a similar Drop Down Corner Jack in Camper Jacks
Love these stabilizer jacks. The only thing I wish is it was able to lift and not just stabilize. It would be nice for changing tires on my small off road trailer.
Jenny N - 04/20/2022Review from a similar Drop Down Corner Jack in Camper Jacks
I've built my 6X12 enclosed utility trailer for hauling my motorcycle, and camping in it when out riding. Replaced the rear jacks with the cheapest thing I could find after ripping them off once. Decided it was time for some quality replacements, and saw these ARK units on etrailer. Worth every penny when I opened the box. Made a project day out of the install and I am very happy now. Welded on the brackets (supplied) and found that I don't even need a tire jack for the trailer anymore. These lift the trailer wheel completely off the ground if needed. Heading to Death Valley next month to try them out in the field. Thank you etrailer once again.
Review from a similar Drop Down Corner Jack in Camper Jacks
Added one to each rear corner of my trailer to prevent it from lifting the rear of my truck when I load a 2,400lb compact tractor. Wasn't sure if they'd be strong enough when I was ordering them but after receiving them they are perfect and very well made! Works perfect
Review from a similar Drop Down Corner Jack in Camper Jacks
I have done business with e-trailer a number of times. This time however, the shipping was slower than I had expected for an item I thought was "on the shelf". I sent a comment to e-trailer and got a quick reply. "The Virus going around has slowed them down", Which reminded me that there are occasionally reasons for delays that are bigger than all of us. E-trailer is a very good online business. The trailer jacks that I bought are exactly as advertised, well made, heavy duty, and once I get them installed I'm sure I will be happy with my purchase. Bob Sterling Sterling Electrical Services San Leandro, CA.
Robert - 05/16/2021Review from a similar Drop Down Corner Jack in Camper Jacks
Awesome service! Great stabilizer jacks! Good quality and easy to install
Review from a similar Drop Down Corner Jack in Camper Jacks
Great replacements for standard OEM jac ks
Review from a similar Drop Down Corner Jack in Camper Jacks
Great Product. I was replacing a Ark Corner Steady on my Xventure trailer. I used it lift my trailer using a impact gun to extend it. I overtorwued it and broke it. Also it’s not rated to lift, only stabilize. I replaced both with black colored that match my trailer better.
Review from a similar Drop Down Corner Jack in Camper Jacks
Thankfully the product is durable because the packaging sucks. For the $XX increase since last fall, a little more effort with appropriate cardboard density would seem simple
Review from a similar Drop Down Corner Jack in Camper Jacks
etrailer always has the products I need or want. They also do a great job shipping them in a faster time than expected.
Review from a similar Drop Down Corner Jack in Camper Jacks
very well build jack. Love them and worth every penny.
Review from a similar Drop Down Corner Jack in Camper Jacks
Love the stabilizer. Package reall beat up. But luck no damage. Told several friends. They wiil be buying soon!
Review from a similar Drop Down Corner Jack in Camper Jacks
exactly as expected and super fast ship ping!
Review from a similar Drop Down Corner Jack in Camper Jacks
Great product
Review from a similar Drop Down Corner Jack in Camper Jacks
Solidly made, very good adaptability.
Review from a similar Drop Down Corner Jack in Camper Jacks
leg not quite as stout as I would like but they will suffice,
Review from a similar Drop Down Corner Jack in Camper Jacks
Very high quality product!
Do you have a question about this Camper Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.