1. Camper Jacks
  2. Bulldog
  3. A-Frame Jack
  4. 3001 - 4000 lbs
  5. Electric Jack
  6. Bolt-On
Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - Black

Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - Black

Item # BD500199
lowest price pledge
Retail:$551.62
Our Price: $284.54
You Save: $267.08
Camper Jacks
This item qualifies for Free Shipping
Shipping Weight: 24 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This electric A-frame jack offers 22" of total lift. The drop leg has a spring-loaded pull pin for quick release. 3 LED lights allow easy setup at night. Built-in level included. Surfaces are sealed, maintenance-free, and corrosion resistant. Call 800-298-1624 to order Bulldog camper jacks part number BD500199 or order online at etrailer.com. Free expert support on all Bulldog products. Guaranteed Lowest Price and Fastest Shipping for Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - Black. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (245)
  • Q & A (62)
  • Photos
  • Why etrailer?

Bulldog Camper Jacks - BD500199

  • A-Frame Jack
  • 3001 - 4000 lbs
  • Electric Jack
  • Bolt-On
  • 22 Inch Lift
  • Bulldog
  • 1 Jack
  • 2-1/4 Inch

This electric A-frame jack offers 22" of total lift. The drop leg has a spring-loaded pull pin for quick release. 3 LED lights allow easy setup at night. Built-in level included. Surfaces are sealed, maintenance-free, and corrosion resistant.


Features:

  • Tongue jack positions quickly and easily with integrated drop leg
  • Powered drive provides quiet operation and efficient use of electrical power
    • No more hand cranking
  • Internal circuit breaker protects the motor from electrical shorts
    • Hook directly to power, no fuse required
  • Spring-loaded pull pin quickly releases the drop leg into position
  • Built-in level has springs for simple, accurate leveling
  • 3 LED lights make it easy to set up at night
    • Side-mounted spot lights are angled rearward to illuminate weight distribution brackets
  • 4" - 6" Overlap of tubes at full extension provides additional support for side loading
  • Easy-to-access on/off and retract/extend toggle switches make for simple operation
  • Corrosion-resistant, sealed, maintenance-free surfaces
  • Easily accessible emergency manual override in case of power loss
  • Black housing with sleek design protects motor


Specs:

  • Bracket height:
    • 9-3/4" Retracted
    • 31-3/4" Extended
  • Total lift: 22"
    • Screw travel: 14"
    • Drop leg travel: 8"
  • Inner tube diameter: 2"
  • Outer tube diameter: 2-1/4"
  • Lift capacity: 4,000 lbs
  • Power wire: 10 gauge
  • 5-Year limited warranty


How to Determine the Lift Capacity You Need in a Jack

A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.


Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.


It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.


Trailer and Camper Jack Lift

Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.



500199 Bulldog A-Frame Jack with Powered Drive, 22" Lift, 4,000 lbs

Replaces Bulldog BD500186




California residents: click here



Customer Reviews

Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - Black - BD500199

Average Customer Rating:  4.8 out of 5 stars   (245 Customer Reviews)

This electric A-frame jack offers 22" of total lift. The drop leg has a spring-loaded pull pin for quick release. 3 LED lights allow easy setup at night. Built-in level included. Surfaces are sealed, maintenance-free, and corrosion resistant.

- BD500199
by:

Overall the product does exactly what it's intended for and works well. I however assumed that this would be a simple R&R for my camper and did very little installation research other that the video provided on etrailer' s website Sadly it did not fit. Not at all. I didn't take into account that have a double framed hitch toyhauler. The baseplate on the factory leg was a TRIANGLE.....this unit was ROUND. Also the primary shaft was thicker than stock and would not drop down into place I know modifying is frowned upon, but I found that ALL powered hitch legs I found have round mounting plates and it's not mentioned the leg tube is thicker than OEM? Since NOT having a power lift wasn't an option for this camper application...too heavy in the front when ATVS loaded to lift for setting the equalizer hitch tension bars, I proceeded to modify by cutting the rear rounded mounting base ... square. Took off about 1/2 inch. Then I took my metal Dremel sanding bit and increased the hitch leg hole diameter slightly. Took about 1 hr. Dropped it in. Wired it. Tested it. All good. If you can't post this I understand, but take note that some of your website descriptions may need to be enhanced. Thanks!


Comments
All good! Works as intended
Bradley - 07/15/2020


- BD500199
by:

Installed Bull Dog 4000 lb Jack today. Pretty straight forward install. I gave it a 4 star, everything worked fine. I would suggest adding some flat washers along with the lock washers , it gives the lock washer a little better surface to rest on I believe instead of the bigger holes on the Jack. The insulation on the wire was scuffed through to the copper in one little spot, not really a big deal just put some good super 33 electrical tape on it , and they could put a connector on the wire to hook to the battery . Overall very nice ,would absolutely purchase again. etrailer always has quality choices .



- BD500199
by:

Great product, received it quickly, easy directions to follow. EASY to install!!



- BD500199
by:

Simple installation. Can't believe I went this long without a powered jack. Arrived sooner than expected. Great service.



- BD500199
by:

Nice product but poor QC. After assembly and installation the jack would not extend. After some searching online I opened the casing and found that the power wire on the switch was never plugged onto the blade on the back of the switch. I plugged it in and all is good. The plug/blade are the locking type, so it did not come loose during shipping, it was simply not connected at the factory, so I have to assume that nobody performed a function check before boxing it up and sending it out. Somebody with less troubleshooting experience would have probably wound up uninstalling and returning. Buyer beware.



- BD500199
by:

I ordered the Reese Bulldog 4000lb power tongue jack on 6/2 and received it on 6/6, my second order from etrailer and it came just as fast as the hitch that I ordered from them previously. The jack was characteristically well packaged so everything was received in perfect condition. The installation took a half hour, including hitching the trailer up to my truck and unhitching after the swap out. I did read the instructions quickly before starting and I would recommend that anyone doing the installation do so as well, just to avoid any hick-ups. Overall it was a very easy installation. Because of limited space I did have to mount the jack sideways, so I appreciate that Reese gave me that option. The one item that I did not finish was a permanent power hook-up. The power wire provided was too short so I will be putting a connector inline so that I can route the wire to the battery terminal.


Comments
After a year of using the Bulldog tongue jack, I really appreciate how easy it makes hooking up the weight distribution bars on my hitch. Just push the Extend button and lift the connected trailer tongue until I can flex the weight distribution tension bars into place. These need to be standard equipment on travel trailers the crank jack that came with it was entirely inadequate/impractical for the work needed to lift the connected tongue to complete my hook-up.
Ross - 06/06/2019



- BD500199
by:

Haven’t been able to use yet but everything looks like it should but I guess it was dropped in shipping or someplace the level on top is cracked and broken


Comments
Thank you for bring that to our attention. Customer Service will be reaching out to you!
-- Etrailer Expert Brooke M - 08/26/2021


- BD500199
by:

Although I had some technical issues with my trailer being grounded, the Bulldog Jack works beautifully and has a very handy light.



- BD500199
by:

Free shipping, excellent customer service, easy installation and fabrication!



- BD500199
by:

Seems like excellent product but was packaged upside down so the level on top of the jack was broke. I called right away and they were more than happy to send me a New level for the jack. Installation was super easy only took about 10 minutes for the jack and when the new level gets here that will be very easy also. Over all great service by everyone I talked to at etrailer.



- BD500199
by:

This has been a great trailer jack a year into installing it on my 12 x 6 enclosed cargo/camping trailer. The jack is out in the elements 24/7, gets used almost every weekend and is still going strong. I would definitely purchase this product again for my next trailer.



- BD500199
by:

It was very easy to install and it works great. The old tongue jack worked okay but this bully dog jack is smooth and powerful.


Comments
Still giving great service, the small bubble level however has evaporated for the second time. The jack is strong and dependable.
Herman - 07/13/2019



- BD500199
by:

I bought the Bulldog Powered trailer jack from etrailer because they not only have the best price, but amazing service, and shipping was rocket fast!! It took only three days to rural Colorado. I watched etrailers video of the jack being installed that showed details and dimensions so i could be sure it would fit my application. The videos are well made and super helpful to ensure I got the right jack for my trailer. Installation was a breeze, three bolts and one wire hookup and you're finished. The jack works great and the lights are handy. I will say that it is not particularly fast, it is geared low and goes up and down slowly, but it works great and does exactly what it is supposed to do.



- BD500199
by:

It arrived quickly, was easy to install, fit right where the old jack was. The cover fit correctly. It worked just like it was supposed to. It is installed on a 10k gvw cargo/camper hybrid and jacks it no problem.



- BD500199
by:

I have installed the jack and it seems to work well, although I have not use extensively yet. For some reason the shaft diameter was just a hair larger than my previous jack (even though listed as the same size) and I have to grind out the access holes on my trailer. Otherwise installation was straightforward. the shipping from etrailer was extremely quick, and their customer service outstanding.


Comments
Im still very happy with this jack after a year. It makes hitching/unhitching and leveling much more convenient than the manual jack
Bruce - 04/15/2020


- BD500199
by:

Installation was straight forward, works as expected, customer service was top notch!



- BD500199
by:

Very easy install looks great works easy better then cranking



- BD500199
by:

I installed the jack this morning. Very fast delivery from etrailer. Seems to work well testing it on the lot. Suggested improvements. 1) I had to mount the jack sideways because of limited clearance so that is a good feature. But the jack had to face toward the right (looking from the front). This meant the spring loaded pull handle was under the trailer and took too much force for me to operate easily so I went with the standard pin. The mounting holes on the jack could be reconfigured so the jack faces left and the pull handle is forward in a sideways mount. 2) The power cord was barely long enough. It should be a foot longer. 3) The mount for the level has three holes and screws. It should have 4 so you can choose front/back or side/side leveling no matter how the jack is mounted.


Comments
The jack has performed well. Had to replace the level which Bulldog provided under warranty. I would recommend the jack.
Gordy - 01/16/2018



- BD500199
by:

Easy installation, power wire could be longer.



- BD500199
by:

I have had this Jack for a year and it has been a steady Eddy!!!! It works consistently without issue! I love the light for night time hookup. It is super easy to use and has been very reliable!



- BD500199
by:

This Trailer jack id working perfect. I would definitely recommend it for you trailer.



- BD500199
by:

Easy to install and works great



- BD500199
by:

Works great to lift my 3,500 lb fully loaded travel trailer. I have negligible electrical experience and was able to install it myself. I turned the head sideways and my tailgate still doesn't clear it but just barely. It can mostly open to let me get chocks and the like out of the bed. The hardest part was properly crimping on the battery terminal ring to the wire. I used the yellow 10 gauge wire terminal. The loaded spring for the leg is very difficult for me to pull out and adjust so I still use a wood block under the leg. The operation is quiet and makes putting on my wdh bars so much simpler which was my main reason for the purchase. I would definitely buy this product again for that reason alone!



- BD500199
by:

product is great. 2nd one I have bought. Delivery was quick but arrived with box pretty tore up. Piece was not damaged.



- BD500199
by:

Well built, easy install. So far I have had no issues with its operation. No regrets!


Comments
Still no issues. I think I will get years of service out of this unit.
Tlo - 11/22/2020

35
257
Show More Reviews

Ask the Experts about this Bulldog Camper Jacks

  • Replacement Parts for the Bulldog Powered Drive Trailer Jack part BD500199
    I have attached for you a list of the replacement parts that are available for the Bulldog Powered Drive Trailer Jack part # BD500199. I am not sure which part in particular that you are referring to but if it is not listed below then you would unfortunately have to replace the jack. The Ultra-Fab Electric A-Frame Jack part # UF38-944014 would be a good cost effective replacement for this if needed. Replacement Extend and Retract Switch part # BD500363 Replacement Manual Override Crank...
    view full answer...
  • Electric Tongue Jack Upgrade For 2016 Jayco Jay Flight SLX 267BHSW
    You can install a trailer jack that has a round mounting plate like that of the Bulldog Powered Drive Trailer Jack # BD500199 on your 2016 Jayco Jay Flight SLX 267BHSW. The most important thing to check is to ensure that the opening for the jack on the trailer is large enough for the new jack. The Bulldog Jack has an outer tube dimension of 2-1/4". This will need to fit where your current jack is. If the outside diameter of your current jack is smaller you can unbolt the jack when it...
    view full answer...
  • How To Use Bulldog Electric Trailer Jack BD500199 On Trailer Without Battery
    I do have a way for you to power your Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - Black # BD500199 without having to install a 12v battery on your 24' concession trailer, but I do not recommend hooking the battery for the break away system. This battery should stay dedicated to the break away system so it does not get depleted and cause the break away to not work properly if needed. Instead I recommend purchasing the Pollak Black Plastic, 7-Pole,...
    view full answer...
    Image 1 for
  • Troubleshooting Powered A Frame Jack that Wont Move
    What happens if you use the manual crank handle of the jack? Can you get the jack to move? Or is it still locked up? Either way it's probably time to replace the jack, but if you can turn the crank with the handle the issue is most likely the motor but if not it's most likely a damaged screw. If the manual crank works, you might also check the power to the jack. Neither part is available as a replacement part. If you need a new jack I would recommend the Lippert # LC285318 powered tongue...
    view full answer...
  • Recommendation For How To Power An A-Frame Bulldog Powered Trailer Jack Power
    Technically, your A-Frame Bulldog Powered Jack, Item # BD500199, can be powered by the 12 volt circuit on a 7-Way trailer side connector which is in the 1 o'clock position where the wires connect if looking at the back of the 7-Way connector. However, the vehicle side may not have enough rated power for the jack which needs 30 amps. If there are other draws on the power then you could easily overload the wiring and even "burn-up" the 7-Way connector on 2002 Ford F-350. To have peace...
    view full answer...
  • What Weight is Bulldog Trailer Jack # BD500199 Rated For
    Trailer jacks like the Bulldog part # BD500199 that you referenced are rated for tongue weight. So this jack has a 4,000 lb tongue weight limit which would easily handle the 1,300 lbs of tongue weight that you have.
    view full answer...
  • Dimensions of Bulldog Powered Jack BD500199 and Dutton Lainson DL22530
    Your picture didn't make it through and I am not sure what product you are interested in.
    view full answer...
    Image 1 for
  • Bulldog BD500199 Jack Extends But Won't Always Retract
    According to Bulldog, what you are experiencing is most likely a ground issue, believe it or not. They suggest a couple of options to confirm this. 1) If power is getting to the jack, but it's not retracting, it's either a bad motor, a bad switch or a poor ground connection. The ground is the easiest to confirm, so start there. You can test this by turning on the lamp and extending/retracting the jack. If the lamp goes out while trying to operate the jack, it's a ground problem. Remove...
    view full answer...
  • Dimensions of Bulldog Powered A-Frame Jacks # BD500199 and # BD500187
    The top of the Bulldog Powered Jack part # BD500199 and # BD500187 from the mounting bracket measures 21-1/4 inches. The distance from the center of the jack tube to the front edge of the housing is 4 inches.
    view full answer...
    Image 1 for
  • Is There a Power A-Frame Jack That Can Rotate 90 Degrees
    There is a Bulldog jack that has numerous bolt holes to allow you to unbolt the jack and rotate it 90 degrees, the Bulldog Powered Drive Trailer Jack # BD500199. You can see an example of this in the linked video - just forward to about the 6:15 mark. This jack provides 22" of lift (9-3/4" retracted height and 31-3/4" extended height), has a 4,000 lb capacity as well as an outer tube diameter of 2-1/4".
    view full answer...
    Image 1 for
  • How to Charge a Trailer Battery for Use with a Bulldog Jack
    What you described is actually the best solution! Connecting your battery to 12V Power wire from the 7-Way on your trailer is a great way to provide a maintenance charge on your battery to operate a Bulldog jack like part # BD500199. Mounting a battery inside a box like part # 329-HM300BKS inside your trailer will further help to keep your battery safe from the elements (although battery boxes do a pretty good job at that). Please note that the 12V power from your vehicle will not...
    view full answer...
    Image 1 for
  • Can a Breakaway Battery be Used to Power an Electric A-Frame Trailer Jack
    If your breakaway system is powered by its own battery then it is likely a 5 amp hour battery which is not high enough to power an electric trailer jack, such as # BD500199, since they can draw about 30 amps under load. The other issue is that a breakaway system needs its own dedicated battery and should not be shared by other 12 volt accessories. If your trailer has a 7-Way trailer connector with functioning 12 volt circuit you could use electric jack # 3370093500 which plugs into a...
    view full answer...
  • Replacement Switch On Bulldog Electric A-Frame Trailer Jack
    We do offer a replacement extend/retract switch for Bulldog Electric trailer jacks. The replacement is part # BD500363, and it fits models BD500185, BD500186, BD500187, BD500188, BD500199, and BD500200. A replacement for the light switch is also available as part # BD500362 for the same jack models.
    view full answer...
    Image 1 for Image 2 for
  • Recommended Electric A-Frame Trailer Jack for a Forest River Rockwood Roo 23SS
    You are correct in that the Fastec Electric Trailer Jack part FIC 3500 that you have now is rated for 3,500 lbs. It also offers up to an 18" lift. You can certainly use a 4,000 lb jack in place of this and for that, I recommend using the Bulldog Powered Drive Trailer Jack part # BD500199 on your Forest River Rockwood Roo 23SS. This jack offers up to 22" of lift and has an additional 500 lbs of capacity. The added capacity will extend the life of your jack because it does not have to work...
    view full answer...
  • Travel Length and Extended Length of Bulldog 4,000 lb Powered Drive Trailer Jack
    The specifications we have for the Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs # BD500199 (Black) and # BD500200 (White) are the correct ones. We take these measurements ourselves and the 31-3/4" extended height and total lift of 22" (14" of screw travel and 8" of drop leg travel) are the correct specs. Bulldog replaced an older jack with this Powered Drive jack, and the specs you referenced are for the older, discontinued jack so Bulldog may not have...
    view full answer...
  • Warranty Coverage of Bulldog Powered-Drive Trailer Jack # BD500185
    The Bulldog Powered-Drive Trailer Jack you mentioned, part # BD500199 is covered by a 5 year Limited Warranty. If you click the provided link, you can see a video showing the jack being installed.
    view full answer...
  • Replacement Bubble Level Needed for the Bulldog Powered Drive Trailer Jack # BD500199
    The replacement level for your Bulldog Powered Drive Trailer Jack # BD500199 is found as part # BD500193 on our site. It does come with the screws as well.
    view full answer...
    Image 1 for
  • Replacement Manual Override Lever for the Bulldog Powered Drive Trailer Jack
    The replacement manual override lever for the Bulldog Powered Drive Trailer Jack # BD500199 is found as part # BD500203 on our site. Simply click on the product (linked to this page) and it will take you to the product page for purchase!
    view full answer...
    Image 1 for
  • Dimensions of Bulldog Electric Jack # BD500199 from Mount to Motor Housing
    I went out to our warehouse to assist with the dimensions of the Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 14" Lift - 4,000 lbs - Black # BD500199. From the top of the mounting plate to the bottom of the motor housing is 12-7/8 inches. From the top of the mount to the lowest part of that housing that includes the light, the measurement is 11-5/8 inches.
    view full answer...
    Image 1 for
  • Troubleshooting Malfunctioning Bulldog Power Jack # BD500199
    I spoke with my contact at Bulldog, and he provided several possible causes for the problem you are experiencing. The jack grounds via its attachment point to the trailer. In case there is excessive paint between the jack and the trailer frame, running a separate ground from the jack mounting flange to the trailer could possibly solve this problem. Make sure that the jack mounting flange is making direct metal to metal contact, and that there is no corrosion between the two that would...
    view full answer...
  • Will Bulldog Powered-Drive Trailer Jack, # BD500199 Work on a 4,700 Pound Travel Trailer
    The total lift capacity of the Bulldog Powered-Drive Trailer Jack, # BD500199, is 4,000 pounds. If mounted on the tongue of the A-Frame trailer, the tongue weight cannot exceed 4,000 pounds. If you do not know the tongue weight of your travel trailer, it is typically 10 to 15 percent of the gross trailer weight. For a trailer weighing 4,700 pounds, the tongue weight would be 470 to 705 pounds. The jack mounts on a standard A-frame trailer, most of which use the same bolt pattern for...
    view full answer...
  • Recommended Powered Trailer Jack For 2003 Adam 3-Horse Trailer With Living Quarters
    I recommend a powered drive trailer jack like part # BD500199 that would work great for your horse trailer if the tongue weight of the trailer is less than 4,000-lbs when it is fully-loaded and ready-to-go. This jack is designed to mount on a standard A-frame trailer. I have attached a link to a product review video you can check out and also a link to a helpful article that explains how to determine tongue weight you can take a look at.
    view full answer...
  • Troubleshooting Bulldog Powered A-Frame Jack that Does Not Want to Function
    The Bulldog Jack # BD500199 that you referenced grounds through the mounting hardware so your best option would be to run a jumper wire from the mounting flange of the jack to the ground wire on your trailer wiring to see if that gets it to work. It has an internal circuit breaker that automatically resets so only other possible problem is an internal problem. For that you'd want to return it to where you bought it from.
    view full answer...
  • Comparing of the Atwood and Bulldog Electric Trailer Jacks
    The Atwood Power Trailer Jack with Cover and Foot has a lift speed of 15 inches per minute. It also has a lift range of 14 inches. This jack has been around for a very long time and is very dependable. The wiring on this jack is slightly larger than the wiring on the Bulldog model. It is rated for 3,000 pounds. The Bulldog Powered-Drive Trailer Jack - Drop Leg - A-Frame - 14 inch Lift - 4,000 lbs, # BD500199, has a lift range of 14 inches, the only other added feature that this jack...
    view full answer...
  • Do Bulldog Powered Jacks have Inline Fuses
    The Bulldog Powered Drive Trailer Jack part # BD500199 comes with an internal circuit breaker so there should not be a in-line fuse holder on the black wire from the jack unless someone added it during installation or before you purchased the jack used. The Bulldog jacks all have internal circuit breakers and they do not recommend adding an inline fuse holder because it would require a high amperage fuse that is not needed or safe. If the black wire coming from the jack is bad you will...
    view full answer...
  • What Size Battery Should be Used to Power Bulldog Electric A-Frame Trailer Jacks
    A standard car battery will work to power Bulldog trailer jack # BD500199. The battery will need to have an amp hour rating greater than 30 amps which is the max current draw of most electric A-frame jacks. Other option is to use jack # 3370093500 or # UF38-944037 provided your tow vehicle has a 7-Way trailer connector with functioning 12 volt circuit. Both of these jacks are powered through the 7-Way so no battery is required on the trailer to run the jack. I have linked videos for...
    view full answer...
  • How Much Power Does the Bulldog Jack Require to Operate
    The Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 14" Lift - 4,000 lbs - Black # BD500199 is run off of a 12V system and has a max draw of 20 amps to extend or retract under load.
    view full answer...
  • Troubleshooting Power Isues With the Bulldog Velocity Jack
    According to the details you told me, it sounds like you are running the Powered Drive Trailer Jack # BD500199 off of a battery on the trailer. Does the problem you describe always occur when the jack as at a particular height? If so, the jack tube might be slightly bent. The bend would cause the jack to bind once it reached a certain height. Manually operating the jack would extend or retract the jack past the point where the tube is bent, at which time the motor would be able to move...
    view full answer...
  • Can an A-Frame Electric Trailer Jack be Powered through a 7-Way Trailer Connector
    Technically, you could attach an electric jack, such as # BD500199, power wire to the 12 volt circuit on a 7-Way trailer side connector. If looking at the back of the 7-Way where the wires attach it is in the 1 o'clock position. But the vehicle side trailer wiring may not be rated high enough to power the jack properly (30 amps). If other things on the trailer are also drawing power from the 12 volt circuit then it could overload it. You would also want to keep the truck running so the...
    view full answer...

Do you have a question about this Camper Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality camper jacks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video by:
Andrew L
Employee Dustin K
Video by:
Dustin K
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Mike S
Updated by:
Mike S
Employee Noah M
Updated by:
Noah M
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Hayden R
Installed by:
Hayden R
Employee Shelly K
Written by:
Shelly K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.