HappiJac Manual Truck Camper Jack System - 36-1/2" Lift - 11,200 lbs

HappiJac Camper Jacks - LC736515-4

Load and unload your truck bed camper with these manual camper jacks. Jacks install permanently on the 4 corners of your camper for stable and convenient loading and unloading.

Features:

• Camper jacks allow you to load and unload your truck bed camper
• Smooth, easy cranking thanks to maintenance-free Acme screws
  • Self-lubricating nuts prevent overextension of jacks
• Square tubing provides superior strength and durability
• Concave footpads reduce movement and provide increased stability
• Locking levers keep jacks at desired height
  • Lower lever when lifting or lowering jack
  • Raise lever to lock jack in place
• Easily accessible components make for simple maintenance
• Hand crank (sold separately) attaches for simple, manual operation
  • Debris cover prevents dirt and grime from building up around crank socket
  • Power drill with 1/2" hex socket can be used to raise or lower jacks when not bearing weight
• Zinc-plated inner and outer tubes resist rust and corrosion
  • Outer tube has powder coat finish for added protection against the elements
• 4 Camper jacks included
  • Designed to fit most campers on the market
• Made in the USA

Specs:

• Overall weight capacity: 11,200 lbs
  • 2,800 lbs Per jack
• Lift: 36-1/2"
• Outer tube height: 51"
• Tube width: 2"
• 1-Year warranty

Note: These camper jacks are designed for lifting and lowering only, and should not be used to support your camper during storage.

Lifting your truck camper on and off your pickup truck is challenging and tedious if you don't have the right equipment. This set of reliable camper jacks helps you load and unload your camper with ease. The jacks bolt on permanently to each corner of your camper and provide support to handle even multi-slide campers, which can weigh more than a traditional in-bed camper.

Camper Jacks are Built to Last

HappiJac camper jacks are built to last with heavy-duty, 2" square tubing for superior strength and durability. The internal steel Acme screw allows for easy cranking with up to 36-1/2" of travel. And the self-lubricating, friction-reducing nut eliminates screw maintenance. The internal components are also easily accessible should the jack ever require service.

Zinc-plated inner and outer tubes resist rust and corrosion. A white powder coating on the outer tube provides additional protection against the elements, plus a nice, clean finish that complements your camper. The concave footpad reduces movement and provides greater stability than large, convex footpads.

Simple Operation

Loading and unloading your camper with these jacks is simple. To begin, make sure you're on level ground. Choose the jack to start with and turn the locking lever so it faces down. This lever is designed to lock the jack in place until you're ready to raise or lower. Be sure that the locking levers of the remaining jacks are facing up to keep those jacks in place while you crank the first. Remove the debris cover from the crank socket and, using a crank handle (sold separately), turn counterclockwise to extend or clockwise to retract the jack. Reset the locking lever to the "up" position when you're done and move onto the next jack. A power drill with a 1/2" hex socket can be used to raise or lower the jacks when they're not bearing weight.

It is recommended that 2 people operate the jacks simultaneously to make it easier to raise each side of the camper evenly. However, 1 person can do the job by alternately cranking each jack in small increments. When lifting and lowering your camper, be sure to keep the front of it higher than the rear, and always keep it level side to side.

Easy Installation

The included brackets are used to attach the jacks to each corner of your camper. The L-brackets and flat brackets secure the jacks to the front of your camper while the Z-brackets are used to secure the jacks to the rear of your camper.

For dually pickup trucks, an optional swing-out bracket (LC182496) can be easily installed to give you the additional clearance you'll need for easy loading and unloading.

Upgrade Anytime to Electric Operation

For faster, electric operation, these manual camper jacks can be easily upgraded to a wireless remote-controlled system with the HappiJac manual-to-electric conversion kit (LC733960-182524). Electric operation makes it easy to mount or remove your camper on your own, rather than having to rely on someone else to operate the jacks on one side while you crank on the other to ensure the necessary incremental adjustments. And if you normally do this on your own, then you'll save a ton of time not having to bounce from side to side. Also, using the wireless remote to operate these jacks gives you the freedom to stand back and make sure that you're keeping your camper level every step of the way.

736515-4 Lippert Components (LCI) Happy Jack Truck Camper Jack System - 36-1/2" Lift - 11,200 lbs - Qty 4

Replaces 4800 HappiJac System

Installation Details