bing tracking image
  1. Camper Jacks
  2. Lippert
  3. A-Frame Jack
  4. 3001 - 4000 lbs
  5. Electric Jack
  6. 1 Jack
Lippert Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs - Black

Lippert Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs - Black

Item # LC285318
Our Price: $229.95
Camper Jacks
This item qualifies for Free Shipping
Shipping Weight: 29 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Powered A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel. Extends 6" in 41 seconds with 1,000 lbs of tongue weight. 1-833-496-1390 to order Lippert camper jacks part number LC285318 or order online at etrailer.com. Free expert support on all Lippert products. Great prices and Fastest Shipping for Lippert Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs - Black. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (171)
  • Q & A (0)
  • Photos
  • Why etrailer?

Lippert Camper Jacks - LC285318

  • A-Frame Jack
  • 3001 - 4000 lbs
  • Electric Jack
  • 1 Jack
  • Bolt-On
  • Lippert

Powered A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel. Extends 6" in 41 seconds with 1,000 lbs of tongue weight.


Features:

  • Electric jack lets you raise and lower your A-frame trailer quickly and easily
  • 2 Toggle switches on the front of the housing let you operate the jack
    • On/off switch controls the light
    • Extend/retract switch controls up and down movement
  • Helical-cut gears with angled teeth gradually mesh for quiet, efficient operation
  • LED light illuminates at a downward angle to help you focus on your coupler
  • Emergency crank (included) allows you to manually operate jack if needed
  • Heavy-gauge steel construction ensures durability and strength
  • Black powder coat finish resists rust and corrosion
  • Durable, textured-housing prevents chips and cracks
  • Easy bolt-on installation
    • Wires to 12-volt power source


Specs:

  • Bracket height:
    • Retracted: 10-3/4"
    • Extended: 28-3/4"
  • Lift: 18"
  • Travel speed (w/ 1,000-lb tongue weight):
    • Extends 6" in 41 seconds
    • Retracts 6" in 40 seconds
  • Outer tube diameter: 2-1/4"
  • Inner tube diameter: 2"
  • Footplate diameter: 5-1/2"
  • Motor voltage: 12 volts
    • Power consumption: 30 amps
  • Lift capacity: 3,500 lbs
  • 1-Year limited warranty


This jack will take the work out of lifting and lowering your trailer. The 30-amp motor ensures trouble-free operation and consistent power with the flip of a switch - no need for a crank. It also has helical-cut gears, which have angled teeth that mesh together clearly. This allows for quieter, more efficient operation than a jack that uses a standard Acme screw.


To ensure great performance even at night, this jack also comes with a front-facing light that houses 3 LEDs. The light is directed at a downward angle allowing for easy deployment and retraction of the jack in low-light settings. The unit also comes with a manual crank handle in case you lose power.


This jack can be bolted or welded onto your A-frame coupler, or it can sit in a brace behind the coupler. As with other Lippert jacks, it is constructed of powder coated steel to ensure that it will resist rust and corrosion and hold up well to the elements. The housing on the jack protects the internal components, and it has a durable, UV-resistant coating that resists chips, cracks, and fading.


You always want to be sure when purchasing a tongue jack that the jack capacity at least matches your trailer's tongue weight (TW). Your trailer's TW should be around 10 percent to 15 percent of your gross trailer weight (GTW), which is the weight of your trailer when it's fully loaded. So if you have a 5,000-lb trailer you would want a jack that can support at least 500 lbs to 750 lbs.


How to Determine the Lift Capacity You Need in a Jack

A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.


Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.


It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.


Trailer and Camper Jack Lift

Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.



285318 Lippert Components (LCI) Power Tongue Jack - A-Frame - 18" Lift - 3,500 lbs - Black

Installation Details LC285318 Installation instructions



Customer Satisfaction Score:


Customer Reviews

Lippert Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs - Black - LC285318

Average Customer Rating:  4.8 out of 5 stars   (171 Customer Reviews)

Powered A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel. Extends 6" in 41 seconds with 1,000 lbs of tongue weight.

by:

The order shipped quickly and arrived when promised (via UPS). After removing the old tongue jack, the new Lippert jack installed in less than 45 minutes. Installation was straightforward due to the clear instructions included with the product. I have been very happy with all products purchased from etrailer.


Comments
The tongue jack is still working as advertised. No problems whatsoever.
Bill D - 11/07/2022


by:

I had my trailer tongue jack fail. I thought (hoped) it was just the actuator switch; replaced that but no luck. Found the exact same product through etrailer and purchased it (why not, the first one lasted for 8 trouble free years). The price was very reasonable and I received it a week sooner than promised. Installation was a snap- 3 bolts and connect a wire. Now on to more camping adventures!




by:

The bolt pattern matched my trailer so it was very easy. No skill needed. I soldered a connection on and hooked it directly into the battery. I had to drill a hole for my foot extension. So far so good. 23 foot travel trailer.


Comments
I wish I would have purchased it the same day I purchased the trailer. It’s super!!!
Roy - 06/14/2020


by:

I purchased a used trailer that came with a cheap "Made in China" copy of the Lippert 3500 lb electric jack which the dealer had installed. It currently retails for $70.00. It failed after 3 years (trailer only 3 years old). So I bought the "real" deal this time. I had read previous views that said the Lippert 3500 was noisy. Mine barely makes a whisper and compared with my previous jack it doesn't make any noise at all. Etrailer even matched a competitor's low price. I couldn't be happier. Installed it yesterday and it moves up and down with ease. I'd give it and Etrailer 10 stars if I could.


Comments
My Lippert 3500 lb electric jack is still working greatsmooth, quiet, and powerful. I am still very happy with it.
Thomas - 09/17/2021


by:

Love it! No more hand cranking. Installation was a breeze. The trailer tongue has nut plates so it was a easy swap. No extra wrench to loosen the bolts.
I just crimped on a connecter on the end of the power wire, ran the wire through the factory clamps of the camper and put it on the positive side of the battery. Done! I kind of wish it had a slow and fast speed but no biggie. I really like the LED light on the front with its own switch. It adds to the “wow” factor. Thanks again etrailer! I never shop anywhere else.




by:

My electric tongue jack arrived in two days, was easy to install and makes hitching an unhitching so much easier.


Comments
I’ve not had any problems in a year of constant use. This was a great purchase.
NK - 06/01/2019


by:

After installation it functions as expected. It raised the tongue of our Casita easily and quietly. It was easy to install on our Casita. It bolted right in. Most of the time taken for the installation had to do with routing the wire from the jack to a power source. I found a suitable power wire in the closet. I used a 10 gauge quick splice connector to make the power connection. It took some effort to get the wire from the jack into the closet. I was able to push a Phillip’s screw driver through to the outside after removing the cable clamp. I cut the red wire from the jack on the diagonal and used pliers to push the red wire through from the outside into the closet. Aside from using the jack today I can’t speak to longevity. It sure was nice not to have to manually perform this task.




by:

Have a 20/20 arctic wolf and this Jack is more stable and more efficient than what came with the trailer




by:

First of all , My compliments to the shipping department. I was actually impressed the way that the trailer jack factory package was secured in the etrailer outer shipping box.
Since I was basically just replacing a old jack that I damaged with a new one, the installation was easy. All works great, exceeds my expectations .




by:

Within an hour after receiving the Jack I had it installed and wired up , it’s a very easy installation , and it’s going to be a great timesaver


Comments
It’s working just like the day I install it just fine
Charles - 06/29/2019


by:

As always a big help in getting what I need, and wanted. Good tec help, fast service. Already installed.




by:

A great jack, works really well, powerful, good lift height, had a great fit onto the trailer itself, and seems very reliable.




by:

Fit perfectly easy to install. I used it on my 2013 keystone sprinter travel trailer.




by:

While I researched the large selection of trailer jacks on etrailer before making my purchase, what I tended to see (by a LARGE margin) at RV campgrounds was this product. So I bought it....quick shipping and super easy installation...in time for our latest camping adventure. It worked flawlessly on our Minnie and was a nice change from having to manually lift and lower my RV off/on my truck tow ball. I really liked the gearing as it was the perfect operating speed for me.


Comments
The jack continues to work flawlessly. the only thing I see to improve on is a slower full stop when retracting the jack and not the awful noise it makes when it hits its upper limit.
Carl - 10/30/2020


by:

It will be a while before I can install. Winter storm coming. The order was filled in a timely manner and I relied on the company from a previous order for a brake controller/cable to fit my Jeep Grand Cherokee.
The factory packaging however, was insufficient to restrain and prevent the triangular mounting flange on the lower end from punching through the cardboard packaging. The result was minor scratching and removal of paint on a corner tip of the flange.

There was no evidence of anything in the package to restrain the lower end from traveling vertically up and down toward the area where it punched through. So..I'd blame it on Lippert for insufficient product package restraints.


Comments
The Jack initially worked fine with the exception of the LED light. I reported my trouble shooting information to etrailer pinpointing the LED board. You were able to have a new board sent to me for replacement and everything worked well all summer after the replacement. The technical guidance you provided on how to open and access the case was first rate, but in this case, I needed to buy a longer screwdriver for the deeply recessed screws.
Craig - 03/22/2019


by:

well I have taken numerous camping trips with this jack and so far I am very pleased. one note is that if you don't have a dedicated ground wire you will need to make one on the camper or the jack will not operate. I figured that out right off the bat. It does move fairly slow, but hey I guess you don't want it moving too fast or you could over shoot your limits that can make the jack blow the 30 amp fuse. Yes I would highly recommend this jack. I have noticed that this jack is installed on a lot of brand new campers at the factory, so it must be a good jack. Highly recommend!!!


Comments
Very well! After numerous camping trips the jack has performed flawlessly!
Terry - 05/08/2019


by:

Happy with etrailer transaction as always. Disappointed with Lippert jacks as they do not hold up very well, but very aware that does not reflect on etrailer! Thanks for the service!


Comments
This does have a 1-year warranty. Please call Lippert for more details: 574-537-8900
-- Etrailer Expert Sierra K - 09/22/2021


by:

Absolutely great buy, one tiny thing would add significantly though, if you would include a $.10 wire connector it would make your package complete!




by:

The jack was a direct replacement of what was on the travel trail and it fit perfect and operates just fine




by:

It does what it needs to. Seems a bit slower than the original. After a year (and several months between use) the switch did act up but after several flips back and forth it did engage and work normally.




by:

Perfect replacement for disontiued model that wore out.




by:

Perfect fit . Works like a charm . Prompt service!




by:

Great jack, works every time flawless. Very easy to install with simple hand tools.




by:

It arrived quickly but, I won't be installing it for a while due to the 3 ft of snow


Comments
Installation was a breeze, works great, a real time saver
Denis G - 01/26/2022


by:

Replaced a Lippert jack that came with our RV after it died. Install was simple as this Jack gad the same footprint and wiring. Hardest part was using jack stands while I was doing the swap. This jack has been flawless since the install a year ago.



25
171
Show More Reviews

See what our Experts say about this Lippert Camper Jacks

  • Does Lippert Electric A-Frame Trailer Jack have to be Lubricated
    The Lippert electric A-Frame trailer jack # LC285318 is lifetime lubricated and should never require maintenance according to the manufacturer. In the event something got inside and caused the jack to misbehave you would have to take the jack apart and remove the foreign object. Otherwise keep the outside clean and the electrical connections in good working order and never overload or overextend it and you will get years of service out of it.
    view full answer...
  • What are the Dimensions of the Head on the Electric A-Frame Trailer Tongue Jack, # LC285318
    I went out to the warehouse to measure the head of the Electric A-Frame Tongue Jack, # LC285318. It measures 6 inches wide from side to side, and 8-3/4 inches wide from front to back. The overall height of just the head is 10-1/2 inches.
    view full answer...
    Image 1 for Image 2 for
  • Replacing Electric A-Frame Tongue Jack, # LC285318, on a 2011 Coachman Freedom Express Trailer
    What you are going to need is another, independent jack with the capacity to lift and hold the trailer while you remove the old one. Once you have the trailer lifted and secured, retract the leg of the jack and remove the foot plate. Then you can un-bolt it from the frame and pull it up and out of the way. Remove it and the wiring and then reverse the process for the new jack. make sure to test it first before putting a load on it.
    view full answer...
  • Lippert Electric A-Frame Trailer Jack Keeps Blowing the 30 Amp Fuse
    What is probably occurring on your jack is that it has been extended too far at some point and has become stuck. Trying to move it in either direction draws too much power as the motor tries to push the leg free. This cause the fuse to blow. What many electric jack manufacturers will do is to smash or otherwise distort the end of the screw that turns to move the leg up and down to prevent it from extending to far. If it does end up extending too far the threads will become permanently...
    view full answer...
  • How Many Amps does the Motor Draw for the Electric A-Frame Tongue Jack, # LC285318
    According to the specifications of the Electric A-Frame Tongue Jack, # LC285318, from Lippert, the jack motor can draw a maximum of 30 amps at 12 volts. The closer to the capacity of the jack (3,500 pounds) the more power it will draw. I have included a link to all of the powered jack options we carry for you to view.
    view full answer...
  • Replacement Electric A-Frame Trailer Jack for a 9,000 Pound Dutchman Travel Trailer
    A 9,000 pound trailer should have a tongue weight of 900 to 1,350 pounds, maybe a little more, so any jack that has a capacity higher than the tongue weight would work. But the higher the capacity of the jack the easier it will be for it to lift the trailer and the longer it will last. That is why I recommend going with the Lippert # LC285318 Powered A-frame jack. It has 2 toggle switches for operation. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel....
    view full answer...
  • Lippert Electric A-Frame Trailer Jack Stopped Working
    When an electric trailer jack of any kind stops working there are a couple of things to check. First, the jack may or may not have an in line fuse that you can check and replace as needed. Some jacks also have an internal circuit breaker which should reset by itself. But if it doesn't then there is likely something wrong with it and the jack would need to be replaced. A ground interruption can also cause the jack to stop working. If there isn't an obvious ground wire to check then the...
    view full answer...
  • How to Wire the Lippert Electric A-Frame Tongue Jack, # LC285318, to a Trailer Battery
    The red power wire on the Electric A-Frame Tongue Jack, # LC285318, is the power wire and it will attach to the positive battery terminal on your trailer battery. First, remove the fuse in the in-line fuse holder on the red wire. Mount the jack to the trailer and tighten it down. The jack grounds through the mounting hardware. Then connect the red wire to the positive battery terminal. The last step is to insert the fuse in the fuse holder.
    view full answer...
  • Powered Trailer Jack Fuse Keeps Blowing on Lippert Electric A-Frame Trailer Jack # LC285318
    It sounds like there is a short somewhere in the wiring on the trailer. Something may be switched like the positive/negative or there is some bare metal on a wire that is touching the trailer frame. The fuse blowing indicates a short or something drawing too much power constantly. You will want to go through the trailer wiring and make sure its all set up correctly, there are no broken wires touching bare metal, and that all the grounds are attached to clean and corrosion free bare metal...
    view full answer...
  • How to Remove the Housing from Lippert Electric A-Frame Trailer Tongue Jack
    I went out to the warehouse and pulled a Lippert jack # LC285318. Based on what I saw there are screws that enter from the bottom half of the housing and hold on the top part of the housing. These very narrow holes will require a long and thin phillips head screwdriver. I made a video for you showing the locations.
    view full answer...
  • Where is the Fuse Located on the Lippert Electric A-Frame Tongue Jack
    The fuse for the Lippert powered A-frame trailer jack, # LC285318, is in its power wire, see picture. If the fuse is not blown then it is likely a ground issue. The jack grounds through the mounting hardware and if there is corrosion build up that would cause it not to work. You would need to remove the jack, clean out all the corrosion, and then reinstall it.
    view full answer...
    Image 1 for
  • Electric A-Frame Trailer Jack Does Not Have Any Power After Sitting for a Year
    On electric trailer jack # LC285318 there is a fuse that you can check. It is in line with the power wire. I have included a picture of what you will be looking for. If the fuse is not the issue then it is likely a ground problem. This jack grounds through where it mounts. You would need to un-bolt it from the trailer and clean away any dirt and corrosion on the trailer and the underside of the bracket on the jack. You may also need new hardware if it is also corroded.
    view full answer...
    Image 1 for
  • Can a 3,500 Pound Electric A-Frame Trailer Jack Handle Tongue Weight on 4,900 Pound Trailer
    The tongue weight of a trailer is typically 10 to 15 percent of the gross trailer weight but could be more. That would make the tongue weight of your trailer around 490 to 735 pounds. An electric jack rated for 3,500 pounds, such as # LC285318, would work well for your trailer. The higher the capacity of the jack the easier it will be for it to do its job meaning it will last longer.
    view full answer...
  • Is Replacement Manual Cranking Hex Nut Available for Lippert Powered Tongue Jack LC285318
    The manual cranking hex nut on a jack like the Lippert powered tongue jack # LC285318 is not a serviceable or replaceable part. The jack will need to be replaced.
    view full answer...
  • Troubleshooting Lippert LCI Electric Jack That Has To Be Manually Started And Then Will Work Fine
    It sounds like a power issue to me, but I reached out to my contact at Lippert to get their thoughts. They said that it is most likely a voltage issue. They recommend checking your voltage going to your system because if your battery falls below 12 volts, your battery will seem to work fine in all other ways, but your jack will not work. I recommend checking your ground connection as well to make sure you have the full power of the jack.
    view full answer...
  • Recommended Electric A-Frame Jack For 5450-lb Camper
    When using a trailer jack on your A-frame trailer, you do not lift the entire weight of the trailer. You are just lifting the tongue weight. For a trailer the size you said your trailer weighs, I recommend a jack like the Lippert Electric Trailer Jack with Footplate, part # LC285318. This jack has a switch for the LED light that shines downward so you can watch the coupler. It has an extend and retract switch for raising and lowering the jack. This jack as a retracted bracket height...
    view full answer...
  • Internal Components Of A Lippert Electric Trailer Jack
    I reached out to my contact at Lippert and they informed me that the missing LED lights on the jack would not cause the jack not to function. I would triple check to ensure your wiring is correct. I would also ensure the ground is connected to a bare metal surface on the trailers frame rail. You may also want to run an additional ground to the frame from the mounting bracket if the factory ground is integrated into the a-frame bracket. If you can provide me with the model number of the...
    view full answer...
  • Troubleshooting Powered Lippert A-Frame Jack that Only Works with Manual Crank
    When an electric trailer jack of any kind stops working there are a couple of things to check. First, the jack may or may not have an in line fuse that you can check and replace as needed. Some jacks also have an internal circuit breaker which should reset by itself. But if it doesn't then there is likely something wrong with it and the jack would need to be replaced. A ground interruption can also cause the jack to stop working. If there isn't an obvious ground wire to check then the...
    view full answer...
  • Does Lippert Electric A-Frame Trailer Jack LC285318 Replace Lipper Jack 181794
    Yes, the Lippert electric A-frame trailer jack # LC285318 does replace the 181794 jacks. The bolt pattern will be the same for mounting the jack and the outer tube diameter is 2-1/4 inches on both jacks. I have linked a video review of this jack for you.
    view full answer...
  • Torque Specification for Attaching Lippert A-Frame Electric Trailer Jack to Trailer
    I spoke with my contact at Lippert regarding the Electric Trailer Jack with Footplate # LC285318 referenced in your question. For this jack they recommend 26 ft lbs of torque for the hardware that will hold the jack to your trailer. This is a very nice electric A-frame jack that will provide a total lift of 18 inches and a 3,500 pound weight capacity. LED lights will illuminate at a downward angle so you can focus on your coupler. It has an outer tube diameter of 2-1/4 inches and a retracted...
    view full answer...
  • Lippert Electric Trailer Tongue Jack is Not Working Electrically or Manually
    If your electric jack isn't even letting you utilize it manually then it is best to get a new jack. Even if you were to find the exact part that needs to be repaired odds are you would need to start replacing more parts as well. To save yourself from having to complete multiple sessions of troubleshooting and getting inside the jack I recommend just purchasing a new jack. We do have the Lippert Electric Trailer Jack with Footplate # LC285318 that fits A-Frame trailers, has an 18 inch...
    view full answer...
  • Do Lippert Powered A-Frame Jacks Need to be Lubricated
    The Lippert electric A-Frame trailer jack is lifetime lubricated and should never require maintenance according to the manufacturer. In the event something got inside and caused the jack to misbehave you would have to take the jack apart and remove the foreign object. Otherwise keep the outside clean and the electrical connections in good working order and never overload or overextend it and you will get years of service out of it. Some people will spray lithium grease up the jack leg...
    view full answer...
  • Troubleshooting Lippert power Tongue Jack When LED lights Stay On
    The LED lights on the # LC285318 should not stay on all the time. On the front of the jack there is an on/off switch that is used just for the lights. Make sure that switch is flipped to the off position when the lights are not needed. The other switch is for retracting and extending the jack. I called my contact at Lippert and they told me that if the switch is in the off position and the lights remain on, you may have a problem with a short in the switch, or a short in the circuit board....
    view full answer...
  • Electric A-Frame Trailer Jack Only has Intermittent Power
    It does sound like there could be some loose wiring in the jack head or it could also be a bad switch/dirty contacts for the switch. Most electric jacks you can take apart to access these components to repair or replace parts as needed. If that does not solve the problem then the first thing I recommend checking on your powered trailer jack is the ground connection. Over time a ground connection can get corroded and cause a poor ground so the circuit is not completed. Many electric trailer...
    view full answer...


< Previous
123. . .12



Do you have a question about this Camper Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Andrew L
Video Edited:
Andrew L
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Chelsea B
Written by:
Chelsea B
Employee Wilson B
Updated by:
Wilson B
Employee Kristen H
Updated by:
Kristen H
Employee Brian T
Updated by:
Brian T
Employee Hannah L
Updated by:
Hannah L
Employee Mike S
Updated by:
Mike S
Employee Noah M
Updated by:
Noah M
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.