bing tracking image
  1. Camper Jacks
  2. Lippert
  3. A-Frame Jack
  4. Leveling Jacks
  5. Tongue Jack
  6. Pop Up Camper
  7. Teardrop Camper
  8. Travel Trailer
Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs
Lippert

Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs

Part Number: LC89VR
In Stock
$323.29
Camper Jacks
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Electric jack lets you raise and lower your A-frame trailer quickly and easily. Auxiliary power cord allows you to power the jack directly from the 7-way on your tow vehicle. Extends 6" in 47.2 seconds with 1,000 lbs of tongue weight. 1-800-940-8924 to order Lippert camper jacks part number LC89VR or order online at etrailer.com. Free expert support on all Lippert products. Great prices and Fastest Shipping for Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (77)
  • Q & A (0)
  • Photos

Lippert Camper Jacks - LC89VR

  • A-Frame Jack
  • Leveling Jacks
  • Tongue Jack
  • Pop Up Camper
  • Teardrop Camper
  • Travel Trailer
  • Electric Jack
  • 3001 - 4000 lbs
  • 1 Jack
  • Bolt-On
  • Lippert
  • Steel

Electric jack lets you raise and lower your A-frame trailer quickly and easily. Auxiliary power cord allows you to power the jack directly from the 7-way on your tow vehicle. Extends 6" in 47.2 seconds with 1,000 lbs of tongue weight.


Features:

  • Electric jack lets you raise and lower your A-frame trailer quickly and easily
  • Power Swap auxiliary cord allows you to power the jack directly from the 7-way on your tow vehicle
    • Cord can be stored under jack cover when not in use
  • Integrated storage ring keeps safety chains off the ground when not in use
  • 3 LEDs illuminate the area for simple nighttime setup
  • Helical-cut gears with angled teeth gradually mesh for quiet, efficient operation
  • Crank-thru socket allows you to manually operate jack if needed
  • Easy bolt-on installation - hardware included
  • Heavy-gauge steel construction ensures durability and strength
  • Black powder coat finish resists rust and corrosion
  • Durable, textured housing prevents chips and cracks


Specs:

  • Bracket height:
    • 10-3/4" Retracted
    • 28-3/4" Extended
  • Lift: 18"
  • Travel speed (w/ 1,000-lb tongue weight):
    • Extends 6" in 47.2 seconds
    • Retracts 6" in 43.5 seconds
  • Footplate diameter: 5-1/2"
  • Power consumption: 30 amps
  • Lift capacity: 3,500 lbs
  • 1-Year limited warranty


How to Determine the Lift Capacity You Need in a Jack

A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.


Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.


It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.


Trailer and Camper Jack Lift

Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.



813748 Lippert Power Stance Tongue Jack - 18" Lift - 3,500 lbs

813749 Auxiliary Power Cord for Lippert Power Stance Tongue Jack





Customer Satisfaction Score:


Customer Reviews

Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs - LC89VR

Average Customer Rating:  4.7 out of 5 stars   (77 Customer Reviews)

Electric jack lets you raise and lower your A-frame trailer quickly and easily. Auxiliary power cord allows you to power the jack directly from the 7-way on your tow vehicle. Extends 6" in 47.2 seconds with 1,000 lbs of tongue weight.

by:

I should have got one years ago. I only use it when it's connected to the truck with the engine running. This I believe gives me full power. It has enough power to raise the trailer when connected to the truck to get the anti sway bars attached. Sure beats all that hand cranking.



by:

The alternate power setup makes its slow rate of rise necessary which would be good if my lithium batteries went low. To avoid battery problems be sure to add an inline battery disconnect from the trailer power when using tow vehicle power. I simple added an inline fuse that could be removed should I need to use the tow vehicle power.



by:

I was amazed at how quickly my replacement from etrailer arrived. I was a bit worried that the installation of my new jack would be more difficult that I expected. The reverse proved to be the case, it was very simple to place the trailer tongue on jack stands, remove the old jack and install the new one. As the old saying goes "even a cave man could do it."



by:

Awesome product. My back thanks you. Very easy to install. Only thing I would change is the speed of the motor. A bit slow but still better than hand cranking.



by:

Installation was very easy. Works fine when using battery power. I have never gotten the jack to work using the accessory power cable hooked to the back of my truck. Not sure if it's a problem with the cable, jack or whatever.
Also, the jack seems to move more slowly than the last one I had, which was also lippert.

Etrailer Expert

Sierra K.

10/22/2021

Thank you for your review. I would test the 1 oclock position of your 7-way on the vehicle with a circuit tester, like item # 40376, which is the 12v power circuit. It should show active all of the time. If it is not active then the jack will not be powered by the 7-way plug, so we would need to figure out why, which is more than likely a blown fuse.



by:

Had preformed better than the original.



by:

It works great for pre loading equalizer hitch on the heavy race trailer.



by:

Terrible, product doesn't work, etrailer refuses to allow will call for local customers

Etrailer Expert

Katrina B.

3/17/2023

But we do have Will Call available for local customers. It all depends on what you are looking for. Are you wanting to come in purchase something and pick it up? Then no, that service is not available due to our new additional warehouses that we have now. There is no guarantee that the part you are needing is in our Will Call location. So, we do not offer local pick up anymore. However, you are definitely free to come into our Vehicle Consultation Center for some assistance in getting the parts that you are needing ordered.



by:

I have used the unit 5 times - the power for the 7 prong no longer works and I have hardwired it into my battery.
If you have a hatchback (Toyota Sequoia), the unit protrudes too far and you will not be able to open your trunk door unless you disconnect your trailer first.



by:

Jack was easy to install and works as expected. Much easier than cranking by hand. I would recommend.



by:

Jack never worked. Didn't install for a few months so I didn't try to return. Pig tail appeared to be wired wrong, black wire was hot, black on my truck is ground.



by:

Very happy with purchase. When jack arrived the rubber plug on top was missing in the package, I sent a quick email and had the parts within 2 days! Great service Thank you!



by:

I’ve only used it a few times,it looks hardy and operates well. It was definitely worth the money.



by:

Nice addition to my RPod 180, install was fast and easy, the up and down are a little slower than I hoped for but still moves faster than you can crank with the OEM jack. Very pleased with form/fit/quality, communication from etrailer was stellar.



by:

It bolted right into the previous bracket. The bolt pattern is a triangle. The install took an hour. It works great so far, very quiet.



by:

Jack was easy to install, fit perfectly. Like others who have commented, it’s a bit slow, but in no way does it take away from the product. It’s faster than me straining my arm and shoulder doing it. It looks and feels like a very good jack. All parts were included and are also of good quality. As every order I have made, service was excellent and better than other companies, no matter the industry. Good price as well. Thanks!



by:

It was a breeze to attach it to my travel trailer and worked flawlessly. Makes my job of setting up stress free.



by:

Sorry, sold trailer/w jack



by:

The power plug is very flimzy the prongs are made with very soft metal and bend very easly.



by:

Works great on my 34ft Avion. I would recomend anytime



by:

Jack came in earlier than expected and worked great on our trailer, all you have to do is hit the button!!



by:

Easy to install and came in 2 days ahead of original delivery date. I have only used it once and I am happy with it. It is slow but not noisy and sure beats cranking my old manual one.

Ed

6/26/2022

Very well



by:

Best thing I have bought for my boat



by:

Fantastic product that does exactly what I wanted. Shipping was exceptionally fast!



by:

I didn't install the Jack but the guy who did liked it. I won't use it till we go camping.


25
77
Show More Reviews

See what our Experts say about this Lippert Camper Jacks

  • Will Lippert Power Stance Electric Jack Fit 2023 Coachmen Apex Nano 194BHS
    The Lippert Power Stance Electric Trailer Jack with Footplate # LC89VR will fit your 2023 Coachmen Apex Nano 194BHS. It actually fits any trailer with an A-frame and the standard jack bolt pattern so it is pretty universal.
    view full answer...
  • Replacement Switch For The Lippert Power Stance Electric Trailer Jack
    The replacement switches for the Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug # LC89VR have been discontinued but you could use a universal switch like the JR Products RV Landing Gear Switch # 37213635 in their place. This switch may require a bit of altering to the motor's housing to fit.
    view full answer...
  • Are Bracket Heights The Distance From Mounting Plate to Foot on Lippert Power Stance Trailer Jack
    That's a good question and yes, the bracket heights referenced does mean the distance from the mounting plate to the foot when retracted and extended for the jack you referenced, which is the following part: - Lippert Power Stance Electric Trailer Jack # LC89VR So when this jack is fully retracted, the distance from the bracket to the foot is 10-3/4 inches, and when the foot is all the way extended, the distance is 28-3/4 inches. The Power Stance is a really nice choice for an A-frame...
    view full answer...
  • Does The Lippert Power Stance Electric Jack Have A Cutoff Switch To Prevent Battery Drain
    The Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug # LC89VR doesn't have a cutoff switch to fully prevent battery drain, but shouldn't pull enough to kill the battery that quickly. If you're storing the trailer and worried about the battery being dead when you go to pick it up then you can install a disconnect switch like the Seaflo # SE29VR. This is super easy to mount on the tongue of the trailer and prevent battery drain while you're away. I've attached a short video below...
    view full answer...
  • Does Lippert Power Stance Electric Camper Jack Come with 7-Way Plug?
    The Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs # LC89VR comes with the auxiliary power wire for trailer 7-way power connection. However, the Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs # LC69VR comes with the power wire for the trailer battery connection only. The Auxiliary Power Cord for Lippert Power Stance Electric Trailer Jack # LC79VR is sold separately and is 6 feet long.
    view full answer...
  • Replacement Extend And Retract Switch For A Lippert Powered Tongue Jack 1817941
    The Lippert Power Tongue Jack 1817941 has been replaced with the Lippert Electric Trailer Jack with Footplate # LC285318, which has the Replacement Extend/Retract Switch for Lippert Electric Trailer Jack # LC49MD. This is the same switch they use for most of their jacks so it should be a fairly simple swap out. The top cover # LC285160 of the jack is held in place by four screws (two up front and two in the back) that face upwards from the base cover. Once these four screws are out you...
    view full answer...
  • Weight of Lippert Power Stance Electric Trailer Jack
    The Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs # LC89VR is 45 lbs at shipping. The packaging will likely be a couple lbs so you will want to consider that. The Power Stance without the plug # LC69VR has a shipping weight of 40 lbs.
    view full answer...
  • Does The Lippert Power Stance Electric Trailer Jack Have A Drop Leg For Quick Operation?
    The Lippert Power Stance Electric Trailer Jack # LC89VR does not have a drop leg. The pin you see by the footplate is only for the footplate to remove and install it. The retraction and extension of the leg is electronically controlled. If you're looking for the fastest jack, I HIGHLY suggest getting the Trailer Valet JXC # TV54FR. I know it's not an electric jack, BUT you can use an electric drill to control the extension and retraction of the leg. I've found that electric jacks are not...
    view full answer...
  • Dimensions of Lippert Power Stance Electric Trailer Jack LC89VR
    I contacted the manufacturer for you and was able to get the dimensions of the Lippert jack: - Lippert Power Stance Electric Trailer Jack with 7-Way Plug # LC89VR. Overall it measures approximately 32-1/4 inches, with a 5-1/2 inch diameter footplate, and is 21-1/2 inches from the top of the bracket to the top of the jack.
    view full answer...
    Image 1 for
  • Jack Cover for Lippert Smart Jack LC89VR
    For a cover for the Lippert Smart Jack # LC89VR you'd want the part # UF38-944020.
    view full answer...
  • How Do LED Lights On Lippert Power Stance Electric Trailer Jack LC89VR Turn On?
    The 3 LED lights on the Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs # LC89VR you were looking at will turn on when the extend and retract switch is pressed, and will stay on for 5 minutes. After 5 minutes it will automatically turn off to keep from draining your trailers battery. I included a video of the # LC89VR for you to take a look at.
    view full answer...
  • Using Vehicle Battery To Power Trailer Tongue Jack.
    Great question. You technically could connect the Bulldog Powered-Drive Trailer Jack - Drop Leg - A-Frame - 21-3/4" Lift - 3,500 lbs - White # BD500188 to your vehicle lights, but we do not have the connector you would need to just plug into your tail light plug. I have a solution for this though. You can get the Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs # LC89VR. This unit comes with a 7 way connection, allowing you to plug in and draw...
    view full answer...
  • Amps required for Power Stance Tongue Jack with Power Swap Cord
    The Lippert Power Stance Electric Trailer Jack # LC89VR draws 30 amps so you'd need to upgrade the wiring of your 12 volt accessory circuit to 10 gauge like with # 10-1-1 which we sell by the foot.
    view full answer...
  • How To Power The Lippert Power Stance Electric Trailer Jack For A-Frame Trailers
    The Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500lbs # LC89VR can be powered by using the included 2-way to 7-way plug or by using wiring it to a battery on your trailer. Yes, you can upgrade the wire gauge to 10AWG # 10-1-1 to counteract voltage drop off. You'll also need to some ring terminals to connect the wire to the trailer battery. You can use the Hopkins Deluxe Trailer Wiring Installation Kit # HM51020 which will come with everything you need....
    view full answer...
  • Can The Head On The Lippert Jack LC89VR Be Rotated For Tail Gate Clearance
    Though the head on the Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs # LC89VR is fixed and cannot be rotated, there is another way to get the clearance needed. The standard 3 bolt pattern this installs in is an equilateral triangle, so you technically can turn the jack and mount it not facing forward. It will work exactly the same, but the LED lights will no longer face the coupler.
    view full answer...
  • Why Would The Lippert Power Stance Work Off The Auxiliary Cord And Not The Coach Battery?
    It sounds like you have one of two possible issues with the Lippert Power Stance Electric Trailer Jack # LC89VR. First there is a fuse on the power wire that is not present on the Auxiliary Power Cord # LC79VR. Be sure to check the fuse. The second issue to check is your ground connection. Since your trailer frame is painted as well as the jack the mounting brackets do not always make the best contact. The jack uses the frame as the ground circuit so you may need to grind off some of...
    view full answer...
  • Are Replacement Parts Available For A Lippert Electric A-Frame Jack
    Unless you have the Lippert Electric Trailer Jack with Footplate # LC285318 you will not be able to get any replacement parts for a Lippert jack. This is the only model with replacement switches available and they can only be purchased with the top cover # LC285160. Because Lippert has pretty much stopped offering any replacement parts for their jacks I always recommend getting away from their jacks and purchasing one like the Electric Jack w/ Footplate # EJ-3520-BBX since we carry all...
    view full answer...
  • Troubleshooting Lippert Power Stance Electric Trailer Jack LC89VR No Longer Working
    I would be happy to help! Now the cause for the power not getting to your Lippert Power Stance Electric Trailer Jack # LC89VR will be dependent on if you are using the 7-way adapter to draw power from your vehicles 7-way connector, or if you hard wired the jack to the battery on your trailer. Starting with the 7-way connector option I recommend using a circuit tester like # 40376 to verify that the 12v power pin of your 7-way connector is working correctly. This is the 1 o'clock pin as...
    view full answer...
    Image 1 for
  • What is the Weight of the Lippert Power Stance Jack # LC89VR?
    The total weight of the Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs # LC89VR is 29 pounds. I went ahead and attached an installation walkthrough video for your convenience.
    view full answer...
  • Does the Lippert Power Stance Electric Trailer Jack # LC89VR Include a Manual Crank Handle?
    Yes, the Lippert Power Stance Electric Trailer Jack # LC89VR does come with a 19mm crank handle. As an alternative you can use a 19mm socket and ratchet to operate the jack as well. This is also a common size used on a Lug Wrench # PT88VR if you are in a jam.
    view full answer...
  • Will Lippert Smart Jack Electric Trailer Jack Work with 24V System
    The Lippert Smart Jack Electric Trailer Jack # LC643589 is designed for a 12V system so if this is the jack for you then you'll need to convert your 24V system to a 12V system. An alternative option is to use the Lippert Power Stance Electric Trailer Jack # LC89VR instead. This doesn't have the smart features of the jack you're looking at but it does come with a detachable 7-way plug you can connect to the back of your truck so you won't have to mess with any kind of converter. Attached...
    view full answer...
  • Fit of Lippert LC89VR Power Stance Powered Trailer Jack on Utility Trailer A-Frame
    As long as the tow vehicle has a 7-way trailer connector with a functional 12-v power supply circuit on the pin in the 1:00 position, the Lippert # LC89VR Power Stance powered trailer jack will plug in and operate. The jack has a 3500 lb lift capacity, and fits the industry standard 3 inch center to center 3-bolt pattern on a trailer A-frame. I've linked to an installation/demonstration video that you might find helpful.
    view full answer...
  • How to Power Electric Trailer Jack When Vehicle With 7-Way Isnt Available
    To run the jack using 110V shore power, you'll need a bench-top type 12-volt power supply which you can easily find online. You'd also need a 7-way socket and pigtail like # 20024. If you choose a power supply with screw terminals on the front of it, the black pigtail wire would connect to the positive terminal and the white pigtail wire to the negative terminal on the power supply. You'll want to use a power supply capable of putting out at least 30A. To run the jack off the trailer...
    view full answer...
  • Is It Possible To Power The Lippert Electric Trailer Jack Off Of A 7-Way Connection
    The Lippert Electric Trailer Jack with Footplate # LC285318 doesn't come with 7-way plug to power the jack but you can just wire it to the 12v hot lead of your trailer's 7-way cable to power the jack off of the 7-way instead of the trailer battery. If you follow the 7-way cable on the trailer it will lead to the junction box where you can test for the 12v hot lead of the 7-way. Lippert also offers the Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug # LC89VR, which comes with...
    view full answer...


< Previous
12



Do you have a question about this Camper Jack?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Andrew K
Installed by:
Andrew K
Employee Kathleen M
Installed by:
Kathleen M
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Kristina F
Written by:
Kristina F
Employee Mike S
Updated by:
Mike S
Employee Aidan B
Video by:
Aidan B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.