1. Camper Jacks
  2. Stromberg Carlson
  3. A-Frame Jack
  4. 4001 - 5000 lbs
  5. Electric Jack
  6. Bolt-On
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black

Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black

lowest price pledge
Retail:$519.06
Our Price: $389.09
You Save: $129.97
Camper Jacks
This item qualifies for Free Shipping
Shipping Weight: 30 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 5,000 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night. Call 800-298-1624 to order Stromberg Carlson camper jacks part number JET-5000 or order online at etrailer.com. Free expert support on all Stromberg Carlson products. Guaranteed Lowest Price and Fastest Shipping for Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (409)
  • Q & A (41)
  • Photos
  • Why etrailer?

Stromberg Carlson Camper Jacks

  • A-Frame Jack
  • 4001 - 5000 lbs
  • Electric Jack
  • Bolt-On
  • 23 Inch Lift
  • Stromberg Carlson
  • 1 Jack
  • 2-3/16 Inch

Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 5,000 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night.


Features:

  • Electric jack with 12V motor lets you lift and lower your A-frame trailer quickly and easily
  • Top-mounted toggle switches are easily accessible
  • Large LED side lights make it simple to set up your camper at night
    • Also ease weight distribution hookup and disconnect
  • Bubble level on top of housing helps you level your trailer
    • Bull's-eye design shows front to back and side to side
  • Built-in clutch protects gears and motor
  • Drop leg allows for greater adjustability
  • Rust-resistant powder coated steel parts are strong and durable
  • Housing is made of vacuum-formed plastic for protection from the elements
    • Black cover is painted to resist fading
  • Round, zinc-plated steel footplate provides stability
  • Emergency crank (included) allows you to manually operate jack if needed
  • Easy bolt-on installation for A-frame trailers
    • 3 Star washers included for making a good ground from jack to trailer
    • Mounting hardware sold separately


Specs:

  • Bracket height:
    • 9-1/2" Retracted
    • 27-1/2" Extended
  • Total lift: 23"
    • Travel: 18"
    • Drop leg: 5"
  • Lift capacity: 5,000 lbs
  • Outer tube diameter: 2-3/16"
  • Inner tube diameter: 1-15/16"
  • Footplate diameter: 5-1/2"
  • Power wire: 10 gauge
  • Motor draws 30 amps under load
  • 2-Year warranty


How to Determine the Lift Capacity You Need in a Jack

A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.


Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.


It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.


Trailer and Camper Jack Lift

Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.



JET-5000 Stromberg Carlson Electric A-Frame Trailer Jack - Black - 23" Lift - 5,000 Pounds

Item # JET-5000




California residents: click here



Customer Reviews

Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black - JET-5000

Average Customer Rating:  4.8 out of 5 stars   (409 Customer Reviews)

Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 5,000 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night.

- JET-5000
by:

A really great product... makes hook up of my concession trailer much easier.


Comments
still going strong after one year!
Ken S - 04/17/2021


- JET-5000
by:

Ordered this jack for my enclosed 28’ trailer, works excellently. This jack has plenty of power to raise the trailer and does so fairly quickly. I wish I would’ve installed one a lot sooner, would’ve saved my shoulder from the hand crank one I’ve had for years. etrailer shipped it fast and they have excellent video’s on installation. Overall I am very happy with the jack and have had no issues with it.


Comments
Awesome! Still works like it should and have had no issues.
Wayne P - 03/20/2021


- JET-5000
by:

Have had the Stromberg Carlson JET 5000 on my construction trailer 20x8x10 two 6k axles for over a year. More than 600lb hitch weight. Has worked flawlessly since day one. We have had three other brands and none compare so far. Sincerely Window & Door Specialist.


Comments
Flawless
Lee W - 03/21/2021


- JET-5000
by:

This was a replacement for the original jack on a 10,000 GVW tag trailer. Installation of this jack was extremely easy with the supplied hardware. Wiring was also very easy. The jack is slow moving but it has a big gear reduction to accommodate the 5000 pound rating. This will not be a problem for us as it will only take a minute longer to hook or unhook the trailer. I like the drop leg feature as it makes it more adjustable. The light is a nice feature also as we do some of our trailering at night.


Comments
Had this jack for about a year now and am very happy with it. Certainly has met all of our expectations. would highly recommend this product.
Al - 09/22/2020


- JET-5000
by:

Jet 5000 great



- JET-5000
by:

Seems like a very good jack very good service havein it shipped very easy to install good instructions I will definitely buy from them again


Comments
great
William A - 03/10/2019



- JET-5000
by:

Extremely sturdy, built well and a breeze to install. Amazingly quiet! Lifts the front of my 32' toy hauler effortlessly, very pleased with this jack and I am most definitely going to recommend this to my parents and friends. Oh, and quick shipping, received the jack in three days!



- JET-5000
by:

Fabulous addition to the trailer! Makes all the difference hooking up and unhitching. Glad we purchased it. Have had no issues with it at all.



- JET-5000
by:

THIS IS CO AMAZING AMAZING WONDERFUL JACK!! ?????????????????????????? VERY HEAVY DUTY. LIFTS MY 2800 TONGUE WEIGHT TRAILER EASY NO SLIPPING. I BOUGHT THE HEAVIEST DUTY I COULD FIND CUZ I COULD NOT LIFT THE TRAILER ANYMORE WITH THE GREATEST DUTY MANUAL ONES ANYMORE.



- JET-5000
by:

We loved it. It never hesitated to go up or down. Unfortunately it was lost when involved in an accident that took our TT out. If we need another new jack in future this will be one we will purchase.


Comments
We no longer have the RV that jack was on due to an accident. It worked great up to that point.
Lisa G - 10/24/2020


- JET-5000
by:

Straightforward installation and it’s never once failed us. Absolutely recommended. I would never settle with a manual jack ever again.



- JET-5000
by:

Ordered on Friday and received on Monday. Install very easy about 30 min. Remove old jack, place the new jack in placw. Secured with new provided bolts and star washers. Hooked up power and ready for the road. Thank you Tim for your quick service and follow up.


Comments
I use the jack almost daily. So far no failures. Would recommend.
Greg - 02/26/2020



- JET-5000
by:

I definitely went overboard with this one. Replacing a failed 2500# with a new 5000# electric trailer jack with no regrets! Buy the best part, labor is the same. Ya, it's overkill, my bet is that it will run forever because of that.



- JET-5000
by:

Ordering Processing, and shipping can not expect any better! Installation, operation. No glitches ! Great followup, excellent staff, product function and appearance all that is desired. Just great!



- JET-5000
by:

The unit works well no problems with the operation. During the install I noticed that I couldn't drop my tailgate without hitting the lift. It would have been nice to have a set of mounting holes at 180 degrees to clear the tail gate. Ended up buying an extender from etrailer to increase the gap and be able to drop the tailgate safely.



- JET-5000
by:

Etrailer is very prompt in shipping. Received Rv jack in 2 days. No damage in shipping. Very easy to install, completed in less than 30 minutes. Works well, so much better than hand crank. I like the videos etrailer provides on their products you know how it works before you get it.


Comments
Works well no problems .
Davy - 09/12/2019



- JET-5000
by:

works well



- JET-5000
by:

We haven't installed it yet on our trailer but I can tell you that the company is great when it came to replacing the first shipment that UPS sent back without delivering or contacting us to pick it up. I called E-trailer to let them know that UPS sent back the order without delivering or contacting us so that we could pick it up and Katherine was great and got another items sent out right away and we did receive that within one week.



- JET-5000
by:

Very good product. Quiet operation. I like it


Comments
Only one that Ive had that has lasted this long. We use ours constantly, so it has a lot of miles on it
John H - 05/20/2021


- JET-5000
by:

Nice solid jack, my only complaint is that it is extremely slow compared to my previous jack.



- JET-5000
by:

When my original lift failed at only 2 years of minimal use. I decided to purchase something better. While searching websites I came across this unit. I decided to upgrade from 3500 to the 5000 pounder. I am so glad, it is so much quieter and faster, not that speed has anything to do it while your camping. Simple install, completed the task in 30 minutes. I would recommend this unit to everyone replacing a 3500lb lift!!


Comments
Yes it is still working just fine. I believe it was excellent for the money spent. Thanks for inquiring
Dave W - 05/04/2018



- JET-5000
by:

So far all has been great, it's not the quickest moving jack I've ever seen, but it is the only power jack I've owned. It seems really well built, but I'm not sure the lights are worth it or not yet. Decided to upgrade after installing a equalizer hitch and having to do all the cranking to set the bars. The factory hitch gave up the ghost after two uses.



- JET-5000
by:

Bought this 8 months ago and it stopped working, called E Trailer they sent a new one out the very same day. That's why I shop with E Trailer. Their customer service is second to none. Thank you for your Excellent customer service E Trailer.



- JET-5000
by:

Orders several items and Melissa W was excellent at listening to my needs and answered all questions. Just received the stabilizer jacks and the JET-5000 power tongue jack. Both were easy to install and work like a charm. The new interior light shipped separately and Melissa kept in touch to inform me of the order status so I knew when to expect it. Definitely ordering again when the need arises.



- JET-5000
by:

After going through 3 of the similarly designed husky Jack's over the last 5 years I find this product to be superior in nature after one year of solid use. The failures I experience with the other Jacks were primarily on Inclined surfaces at full extension, This one passed with flying colors.


28
425
Show More Reviews

Ask the Experts about this Stromberg Carlson Camper Jacks

  • What Are The Quietest A-Frame Electric Trailer Jacks
    There are a number of quiet electric A-frame trailer jacks, although the Stromberg Carlson Electric Trailer Jack # JET-5000 you asked about would not be on the list. That said, you were right on the money with the Bulldog, because their Bulldog Powered Drive Trailer Jack - 22" Lift - 4,000 lbs # BD500199 (Black) or # BD500200 (White) has a powered drive which is going to reduce noise. The other quietest A-frame trailer jack is from Stromberg Carlson, the Stromberg Carlson Electric Trailer...
    view full answer...
  • Recommended Replacement for 4,500 lb A-Frame Husky Brute Electric Trailer Jack
    The electric A-frame jack I highly recommend in order to replace your 4,500 lb Husky is the Stromberg Carlson Electric Trailer Jack # JET-5000. This is one of our most highly-rated A-frame jacks because of its power and ease of use. This jack is rated for 5,000 lbs so it won't work quite as hard as your 4,500 lb jack, has a bubble level on top which is nice so you can tell if your trailer is level, and has simple on/off and up/down switches which makes it very simple to use. I have...
    view full answer...
  • How to use 12V Power Jack With Trailer That Doesnt Have a Battery
    Since your trailer doesn't have a battery I am under the assumption that it has a 4-Way flat connection. Rather than installing a battery, battery box, and a 7-way with charge line circuit you can attach the 7-Way Molded Trailer Wire Connector # H20044 to the Stromberg Carlson Electric Trailer Jack # JET-5000 and use the vehicle battery to operate the jack. To do this simply connect the black wire of the connector to the black wire of the jack. The white wire of the connector will need...
    view full answer...
  • How to Power A-Frame Trailer Jack
    You can either power the Stromberg Carlson Electric Trailer Jack # JET-5000 by adding a 12V battery to your trailer or by connecting it to the 12V power pin (11 o'clock position) on your trailer side 7-Way and then ground the white wire to the frame of the trailer. If you don't already have a 7-Way on your trailer I recommend the Upgrade Kit # e99011 which really helps to simplify your connections and keeps them clean. If you want something more simple then we have the Buyers Products...
    view full answer...
    Image 1 for
  • Will Stromberg Carlson Electric Trailer Jack # JET-5000 Fit Jack with 3 inch Bolt Pattern
    Thanks for the picture of the a-frame jack mounting bolt hole dimensions you have. Based on that we know you have a standard jack mount on your trailer and the Stromberg Carlson Electric Trailer Jack # JET-5000 you are interested in is a confirmed fit and will install easily. I attached a review video for this for you to check out as well.
    view full answer...
    Image 1 for
  • Is Stromberg Carlson Electric Trailer Jack JET-5000 Suitable for 2007 Jayco Eagle 314 BHDS
    The dry hitch weight of the 2007 Jayco Eagle 314 BHDS travel trailer is just under 800-lbs and even loaded to its maximum 9200-lb GVWR the trailer tongue weight should not exceed 1400-lbs. Therefore the Stromberg Carlson Electric Trailer Jack # JET-5000 rated at 5000-lbs will have plenty of extra capacity. This is a good thing since extra capacity means it won't have to work too hard and it should provide a long service life. This jack includes its own separate ground wire. This means...
    view full answer...
  • Is The Bottom Leg Of Stromberg Carlson Electric Trailer Jack JET-5000 Available As Replacement Part?
    If the bottom leg you are referencing on your Stromberg Carlson Electric Trailer Jack # JET-5000 is the foot pad, # 2500-3755G, then we do have a replacement. If the bent leg is the tube that the jack foot goes into, that is not an available replacement part and the entire jack will need to be replaced with another # JET-5000. I included videos of the products mentioned for you to take a look at.
    view full answer...
  • Electric Trailer Jack for a 5000 LB A-Frame Trailer
    Adding an electric jack to the tongue of your 2016 Keystone Hideout BHWE is going to take the headache out of manually cranking it up or down when loading it or unloading it from the vehicle. I recommend Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 2 inch Lift - 5,000 lbs - Black Item # JET-5000. This jack is designed for A-Frame trailers with a 5000 lb weight capacity. Bolt on application. Has a total of 23 inches of lift. 18 inches of travel on the main tube and...
    view full answer...
  • How to Determine Capacity Needed for Electric A-Frame Trailer Jack
    An electric A-frame jack like the Stromberg Carlson # JET-5000 that you were looking at will be responsible for supporting and lifting a trailer's tongue weight. You will just need to make sure that the jack you choose has enough capacity to support your trailer's tongue weight, which is typically around 10 to 15 percent of its total weight. It's a good idea to choose a jack with a capacity that exceeds the tongue weight, as this just allows it to work under its limit which will lead to...
    view full answer...
  • Electric A-Frame Tongue Jack for 1998 Sundowner Horse Trailer
    Sundowner made both bumper-pull A-frame trailers and gooseneck trailers in 1998 but it sounds like you have a bumper-pull A-frame type and need an electric tongue jack. We like to suggest using an electric tongue jack with more weight capacity than you will actually need, since this this tends to improve both reliability and the jack's working lifespan. One of the best options is the Stromberg Carlson # SC63VR. Unlike most jacks, this one has stops that prevent over extending or retracting...
    view full answer...
  • Height Above Mounting Bracket for Stromberg Carlson Powered A-Frame Jack # JET-5000
    The height above the mounting bracket for the Stromberg Carlson Electric Jack part # JET-5000 is 23 inches and the motor portion that sticks out in front of the leg tube of the jack will be 3-1/2 inches forward of the center of your a-frame hole for a jack.
    view full answer...
    Image 1 for
  • Recommended Electric Trailer Jack for 28 Foot Car Hauler with GVTW Of 10,000 lbs.
    Yes. I do recommend this Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black, # JET-5000, for your application. The two biggest things to look at when determining a trailer jack is your trailer tongue weight and the height of the trailer coupler. The Tongue weight is typically 10 to 15 percent of your trailer weight when it is fully loaded. With trailer jacks, the ratings aren't always spot on and you don't want to go too small, so I think this...
    view full answer...
  • Can the Head of Electric Trailer Jack JET-5000 be Rotated
    It sounds like you need a little more space. While there isn't a way to turn the head on trailer jack # JET-5000 you might be able to turn the whole jack since it has slotted mounting holes. That is the first thing to try. If that isn't going to work for you and the issue is there isn't enough space between the jack head and a lowered tailgate on a truck then the easiest solution is to use a longer ball mount. We have a lot of ball mounts depending on the capacity and rise/drop needed...
    view full answer...
  • Replacing A 4-Bolt Trailer Jack For An A-Frame Trailer Coupler
    Almost all A-frame jacks now have the triangle or round mounting plate with the 3 bolt-3 inch on center holes. We do not carry anything that has the 4 holes. We do have some electric jacks like the Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black, # JET-5000 that have a round plate to mount, but the holes are still lined up with the triangular mount design. Unfortunately you will either have to weld the bracket or drill holes in your coupler...
    view full answer...
  • Powered A-Frame Jack Recommendation that Uses 7-Way Plug to Draw Power
    We have a powered A-frame jack that uses a 7-way to power the jack like you are interested in. For that you would want the Ultra Fab part # UF38-944037. This jack has a 3,500 lb lifting capacity. I attached an install video for more info for you to check out as well.
    view full answer...
  • Should Stromberg Carlson Electric Trailer Jack JET-5000 Have Circuit Breaker on Power Wire
    You can use either a fuse or an auto-reset circuit breaker on the power circuit for the Stromberg Carlson Electric Trailer Jack # JET-5000. Since this unit draws 30-amps with a 1,700-lb load a 30-amp breaker like # PK54530 will allow all needed power to reach the jack. You'll use ring terminals # 44-5310A, 10-gauge duplex wire # 10-2-1 and butt connectors # 05732-2. The copper color post on the breaker goes to the battery.
    view full answer...
  • Will Stromberg Carlson Electric Trailer Jack # JET-5000 Work on Heartland 412RL Fairfield Trailer
    The Stromberg Carlson Electric Trailer Jack # JET-5000 will easily have the capacity you need for your trailer. The 5,000 lb capacity for the jack is the lifting strength of it. On a trailer this relates to the tongue weight and not the total trailer weight. So if you have a 14,000 lb trailer you'd have a tongue weight most likely around 1,400 lbs which this would have no problem with.
    view full answer...
  • Origin Of Stromberg Carlsone Electric Trailer Jack # JET-5000
    I reached out to the manufacturer that is headquartered in Michigan and the Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black # JET-5000 is made in China. This is a very nice jack with great customer reviews. I've attached a video for your convenience.
    view full answer...
  • Electric Trailer Jack Recommendation for 2012 Coleman 28 Ft Travel Trailer
    The Stromberg Carlson Electric Trailer Jack # JET-5000 mentioned in your question is a great electric tongue jack that can lift and lower your trailer using its 12V motor with a total lift of 23 inches. It has a 5,000 pound lift capacity so it will have no problem handling the tongue weight on your 2012 Coleman 28 foot trailer. This jack needs to be bolted on to the A-frame of your camper and the necessary hardware is included. This electric jack is actually designed to wire directly...
    view full answer...
  • Comparing the Atwood 3,000 lb Electric Jack to the Stromberg Carlson 5,000 lb Electric Jack
    The Atwood Premier Performance Series Power Jack when compared to the Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black # JET-5000 will be slightly slower. The Atwood is a faster jack, but you do miss out on the quality of some components and other features. The Stromberg Carlson jack will be quieter and will also have an automatic shutoff that is much smoother than the Atwood to prevent the motor from retracting or extending too far. It overall...
    view full answer...
  • Distance From Mounting Bracket to Foot Plate of Stromberg Carlson Electric Trailer Jack
    The distance from the mounting bracket to the foot plate on the Stromberg Carlson Electric Trailer Jack # JET-5000 is 9-1/2 inches. I've added a photo for you showing this dimension. This jack has a 5,000 lb capacity with a total lift capability of 23 inches.
    view full answer...
    Image 1 for
  • Availability Of An A-Frame Trailer Jack With Round Mounting Flange With 4 Holes
    Almost all A-frame jacks have the triangle mounting plate with the 3 inch on center holes. We do not carry anything that has the 4 holes. We do have some electric jacks like the Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black, # JET-5000 that have a round plate to mount, but the holes are still lined up with the triangular mount design. Unfortunately you will have to drill holes in your coupler for modern standard trailer jacks. My recommendation...
    view full answer...
  • Clearance Needed for Tailgate to Open With Stromberg Carlson Electric Jack
    From the center of the tube to the furthest part of the motor housing on the Stromberg Carlson Electric Trailer Jack # JET-5000 measures approximately 5-3/4 inches. If you are worried about having enough clearance for your tailgate there is a simple solution, which is a long ball mount. Assuming you have a 2" hitch there are a number of options depending on the rise of drop you need: - Ball Mount 3/4" Rise or 2" Drop, Extra Long # D-26 - Curt Class III Drawbar - 2" Rise - 4"...
    view full answer...
    Image 1 for
  • Replacement Jack for Husky Trailer Jack that is Faulty
    I wish there was a fix I could point you towards but yours seems to be damaged to the point of needing being replaced based on the issues you found as well as the melted wiring you found too. I wish we still carried the Husky jacks as they seemed like a really great jack but we stopped being able to get them so we had to discontinue them. Would you consider a different one?
    view full answer...
  • Electric Jack Recommendation for Car Hauler Hauling 3,400 lb Car
    Cranking jacks is one of the lead causes of crankiness so I can sympathize with you there! The Stromberg Carlson Electric Trailer Jack # JET-5000 that you referenced has a 5,000 lb lifting strength and would make easy work of your trailer. The bigger the better is the right mindset as having an overkill jack allows it to work faster and last longer since it won't be straining.
    view full answer...
  • Powered A-Frame Jack Recommendation for R-Pod Camper
    The Stromberg Carlson 5,000 lb jack part # JET-5000 that you referenced would be a great choice. It has 5,000 lb of tongue weight capacity which is quite a bit more than any trailer it would be installed on which helps it work quickly and minimize strain which helps the jack last for a very long time. Check out the review video I attached for more info on this as well.
    view full answer...
  • Distance from Mounting Plate to Motor Housing on Stromberg Carlson Electric A-Frame Jack
    I reached out to a representative of Stromberg Carlson, who told me that the distance from the mounting plate to the motor housing is 11 inches on the Stromberg Carlson Electric Trailer Jack # JET-5000, as you can see in the accompanying photo. This A-frame jack has a lift capacity of 5,000 lbs, offers a total lift of 23" and side LED lights if you need to set up at night. I've also added a link to a video review of this jack for you to take a look at as well.
    view full answer...
    Image 1 for
  • Will Stromberg Carlson Powered Jack part # JET-5000 Work on Trailer with 1,100 lb Tongue Weight
    For your trailer that has a tongue weight of 1,100 lbs the Stromberg Carlson Jack part # JET-5000 would work well as it has a lifting capacity of 5,000 lbs.
    view full answer...
  • Compatibility of Stromberg Carlson Electric Jack Replacing 2-1/4 Inch Outer Diameter Jack Tube
    The Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black # JET-5000 will work just fine as a replacement. The 1/16th inch you referenced is not a big issue in this case because the mounting bolt pattern will be the same.
    view full answer...
  • Recommended A-Frame Electric Jack for Horse Trailer with Living Quarters
    If you are looking for an a-frame electric trailer jack for a horse trailer with living quarters, you are going to want to go with a heavy-duty option because of the heavy tongue on the trailer. The heavier you go, the longer the jack will last as it does not have to work as hard and the faster it will extend and retract. The Stromberg Carlson Electric Trailer Jack part # JET-5000 is what I recommend because of the 5,000 lb weight capacity. That said, you could go with the Electric...
    view full answer...

Do you have a question about this Camper Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality camper jacks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Andrew K
Video by:
Andrew K
Employee Zach D
Video by:
Zach D
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Michael B
Installed by:
Michael B
Employee Shelly K
Written by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.