bing tracking image
  1. Camper Jacks
  2. Ultra-Fab Products
  3. Landing Gear
  4. Fifth Wheel Landing Gear
  5. 10001 lbs or More
  6. Electric Jack
Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs

Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs

Retail:$1,310.31
Our Price: $793.19
You Save: $517.12
Camper Jacks
This item qualifies for Free Shipping
Shipping Weight: 74 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Specially designed to raise, level and support your fifth-wheel trailer or RV, this pair of electric jacks features 12-volt motors that function independently of one another for simple, effective leveling. Extra-large footplates help prevent sinking. 1-800-496-5010 to order Ultra-Fab Products camper jacks part number UF17-943010 or order online at etrailer.com. Free expert support on all Ultra-Fab Products products. Great prices and Fastest Shipping for Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (183)
  • Q & A (0)
  • Photos
  • Why etrailer?

Ultra-Fab Products Camper Jacks

  • Landing Gear
  • Fifth Wheel Landing Gear
  • 10001 lbs or More
  • Electric Jack
  • 38 Inch Lift
  • Weld-On
  • 2 Jacks
  • Ultra-Fab Products

Specially designed to raise, level and support your fifth-wheel trailer or RV, this pair of electric jacks features 12-volt motors that function independently of one another for simple, effective leveling. Extra-large footplates help prevent sinking.


Features:

  • Perfect for 5th-wheel trailers and RVs
  • Dual electric jacks raise and lower with the flip of a switch - no more hand cranking
    • Each 12V DC motor has its own toggle switch
  • Jacks operate independently for simple, accurate leveling
  • Built-in clutch prevents damage from overextension
  • Extra-large footplates offer superior stability
    • Helps to prevent sinking and tilting
  • Simple installation
    • Weld hangers to front of trailer frame, beneath overhang
    • Bolt jacks to hangers
    • Mount switches anywhere on trailer for easy access
  • Sturdy steel construction


Specs:

  • Bracket height:
    • 27" Retracted
    • 74" Extended
  • Lift: 38"
  • Rate of travel: 15 seconds/inch
  • Combined weight capacity: 12,000 lbs
  • Footplate dimensions: 8" long x 5-3/4" wide
  • Tubing width: 2-1/2"
  • Distance from top of motor to first weld point: 8-1/2"
  • 3-Year warranty


Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.



17-943010 UltraFab 5th-Wheel Landing Gear - 12,000 lbs

Item # UF17-943010

Installation Details UF17-943010 Installation instructions



Customer Satisfaction Score:


Customer Reviews

Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs - UF17-943010

Average Customer Rating:  4.7 out of 5 stars   (183 Customer Reviews)

Specially designed to raise, level and support your fifth-wheel trailer or RV, this pair of electric jacks features 12-volt motors that function independently of one another for simple, effective leveling. Extra-large footplates help prevent sinking.

by:

I am very pleased with my purchase of Ultra-Fab Deluxe Electric Landing Gear Set - 12,000 lbs rated. My 1985 Alpenlite 5th Wheel was designed and built for hand-crank front jacks, so it was a bit of a challenge to figure out how to replace them with the electric landing gear. Except for welding the mounting brackets to the trailer's frame, I did all the work myself, taking my time and checking my work as I went, following the very clear written instructions that came with the product. These jacks are built for strength and reliability and have the power to raise and lower the RV for hitching and unhitching quickly and easily, compared to the original hand-crank jacks. I like that each jack can be operated independently for ease in leveling.


Comments
Every time I use my trailer, I am so glad I got this landing gear!
HKW - 08/30/2022


by:

I have a 2013 Heartland Toyhauler, weight about 12,000 pounds, we added large solar panels on the roof thus have a large battery bank running across the front, adding an extra weight at 800 pounds. The factory 6000 pound jacks where having a difficult time lifting the trailer off the hitch, straining. These new jacks motor on each leg, no problems lifting, there rated at twice the load rating at 12,000 pounds. We removed the front cover section on the front of the 5th wheel in order to gain access to the jack locations. The Jacks fitted right in where the old ones went. I made up a small box to mount the two switches, with an long cord, that connect and sits in the side lockable basement storage. So no outside switches, added security, there no way to move the jacks, unless you unlock the side basement compartment, plus i added a master shut off switch so there's is no accidental activations. I going to be building a custom enclosed trailer this year, and i be using these jack, for sure.


Comments
Fantastic product, works very well no issues
BRAD A - 02/20/2020


by:

Upgraded my 2008 Weekend Warrior LED 3505 to the Ultra-Fab and couldn't be happier! The original Venture landing gear was complete garbage and has failed 3 times now. The Ultra Fab landing gear lifts much faster and sounds better. Another positive thing is the storage space I gained over the generator from removing original erector set. Ultra-Fab landing gear is much more robust compared to the original. I'm completely pleased with etrailer.com and their awesome service. I've talked a friend of mine into upgrading his garbage gear to the Ultra-Fab from etrailer. It was a bit of work to install, but my only regret is that I didn't do it sooner. Thanks, etrailer!


Comments
Still going strong, so glad I upgraded so much better than the original system.
Jim P - 07/02/2019


by:

Compared to what came on our Coachman Brookstone camper from the factory, I would rate these much, much better. They are a bit slower, but that just generally means a lower gear ratio and more lifting power. I would like to see a bit tighter fit between the two square tubes as well to reduce some of the play and wobble. Love the fact that they have grease zerks on them. I have had them for a while now and trust them. Can’t say that about the factory ones as the gears in those started to slip! My brother has a Denali and we just installed a set on his as well. And so, I obviously recommend these.




by:

Easy install, did require a little beating into the supports. works much better than the stock legs only complaint is switch covers are flimsy and fell off first trip with out fifth wheel .




by:

Awesome product. Surprisingly easy install. Fit right in factory brackets on a 2018 voltage triton 3551. Love the dual motors with individual controls. Hardest part of install was having to leave to go buy some 8 gauge connectors to connect power from both motors to power from trailer. The factory landing gear was rated at 6000 lbs. now with the 12000 lb landing gear the motors don’t sound like they are straining.




by:

These jack solved my problem on my 2019 Cougar 29rks. Factory jack were just barely able to lift the camper. I wore out a set of jack's in just 2 years. Decided to try these and they work great.




by:

Easy to install and wore. Had to modify my mounts to make i easy instead of removing them and welding in new ones. Otherwise easy to install. Work way better then the single motor and gearbox that was original installed by manufacturer. Doubled the lifting power. Being independent of each other allows for easy leveling on uneven ground.




by:

System went together pretty well and I got the gamma electronic controller to operate both legs individually or simultaneously. Make sure your measurements are correct and you may be able to reuse your existing brackets. If not, get welding




by:

It came record time. It was everything I needed. Installation was easy. The instructions were great.


Comments
They work great except they’re very slow.
Nick - 08/10/2022


by:

Just started install, so far it's a no brainer. Had hand crank up camper jacks on it. Just need to do a little metal work. Yes, I put a camper on a 5th wheel trailer with a 12'ft gated deck with BBQ and sink with artificial grass.Dogs are happy.




by:

Best landing gear for big 5th wheels! Seriously, stop waiting and just upgrade to these already! You won’t regret it!




by:

Install was easy, the jacks work great. The only thing I think they needed is a cover plate around the switches so it looks nicer and finished. But it’s a great product so far…




by:

Arrived when they said they would. Fairly easy to install, right side on my Stealth a little tight but got it in. Of course had to run some wiring as expected. New landing gear operates great with no clutching! wish I'd done it sooner.




by:

I bought this item and had a welder weld up brackets
Installed (wired up motors ) and one did not work .. called company they gave me phone number of manafacture and I called .. got tech on phone ... had motor in 3 days and just now wired up and is working fine ... they seem a little slow but I have a 36’ goose neck with a lot of weight up front with living quarters and etc I’m happy with them and would recommend them


Comments
Jack are working fine ... have had no problems with them ... they are a life saver at my age
Paul - 08/08/2019


by:

Landing gear arrived quickly and just as advertised. Quick install that fit perfectly into my camper. This is not my first purchase with etrailer and so far they have always been great to buy from.




by:

I LOVE that there will no longer be a bar connecting the two jacks. It would have to be removed in order to service my generator. These new jacks are faster than what I replaced. The quality appears to be top notch. The notches on the jacks didn't line up the same as my old jacks. In fact the bottom ones got in the way of the bracket on the trailer. I made some modifications. I pounded the bottom notches back in (I shaved the edges with a grinder so it wouldn't get all mashed up). I spot welded the included new brackets in the location of the old jack notches so that the jacks would be mounted securely between the two brackets. Everything works great. I mounted the switches in the propane compartment so they are somewhat hidden. I also had to cut off a piece of the tube used for the old external manual jack lift that was in the way of the motor. In all it took longer than I thought it would but It's nice to take your time and do it right.




by:

We just had the landing gear installed (by Professional Trailer Repair in Tucson. Would 100% recommend them). The landing gear works well and seems very solid. I really like having the two motors to individually adjust the legs. Only downsides: (1) there isn’t an easy way to manually raise/lower if the motor blows, (2) the pin to keep the legs in place has a little ball on the end instead of a cotter pin…it seems like it could come out very easily when bouncing down the road.




by:

Received items earlier than scheduled. Pretty easy to install. Went with RV switches instead. Sounds good and they move up and down with ease. Will do a update later for long term results. Believe it's a great investment. It's on a 2018 toy hauler 40ft. Factory legs barely worked it kept slipping going up .F.Y.I . they say the back up way is to remove motor on top to manually operate it.




by:

Just received, haven't put them on as yet but they look heavy duty..very fast delivery..




by:

Recieved the shipment very quick from Etrailer. When I removed the original landing gear, my existing brackets were positioned correctly for the new gear, so installation was very easy. Raised the 5th wheel and put jack standed under the main frame. removed old gear and bolted new in existing brackets. Wired it all up. I mounted the switches and after connecting found I wanted them to operate opposite of how I mounted them, instead of removing switch, just swapped the wires going to the jack to reverse polarity, much easier. Jacks lift our 14k 5th wheel much easier than the original gear and make leveling it super easy. Great product




by:

The jacks arrived in three days with the free shipping option. That's great service.

I just finished the install, and I am pleased with the jacks. The installation was fairly straightforward. The tabs on the jacks with the 13.5" spacing fit my existing brackets like a glove. That's one of the reasons I ordered these jacks. I've only used the jacks so far to pick the camper up off the jack stands I had it on while swapping the jacks, but they didn't seem to be straining in the least. My old Atwood single motor jack system struggled every time I used it.

These are the only issues I had with my installation:
1. One of the grease zerks was broken out of the plastic motor housing when the jacks arrived. From reading other reviews, that appears to be a fairly common issue. I'll pick up a zerk with larger threads and take care of that.
2. Six of the eight wires were not long enough for me. It wasn't a big deal to pick up some wire and lengthen them, but if they had been 10 feet long instead of 7 feet long, the installation would have been a little easier.
3. When the jacks are fully retracted, the bottom tube (without the foot installed) is about 4-6 inches up inside the opening on the trailer. The jacks have 21 inches of stroke, so this shouldn't be a big deal. I'll just have 15-18 inches of stroke instead. I could remedy this by cutting the existing brackets off my trailer and welding on the provided brackets lower, but that is a lot of unnecessary work.

All in all, this is a great product, and I look forward to using the jacks. The single motor Atwood jack that came on the trailer has been my greatest source of dissatisfaction since the day I bought the trailer.

Thanks to Ultra-Fab and E-Trailer.


Comments
One year later these jacks are still working great. Raising my fifth wheel is no longer a stressful event. The fifth wheel manufacturers would be smart to install these jacks on new units instead of the crappy one motor jack systems. Thanks again to Ultra-Fab and ETrailer!
Mark M - 10/25/2017


by:

I purchased this product to replace the landing gear that had failed on my 5th wheel. I called around to a few other dealers and they were not very helpful. Ricky S. at e trailer was able to give me the product specs. that I needed and took my order that day.
My product arrived one day earlier than expected.
I installed the new landing gear myself and I must say that if you are a mechanical novice don't attempt yourself. This of course depends on your coach design. Mine is a toy hauler and the passenger side jack is right next to the generator. It was a challenge to get the old jack out and the new one end. However with that being said the new landing gear works as advertised and I am happy that I used e trailer to make these needed repairs.




by:

These are great jacks for my 5th wheel. I have them wired independently so I can use them to help level my rig. I haven’t had any issue with them. I would order these again if I needed to.




by:

EasY install, good lifts



25
183
Show More Reviews

See what our Experts say about this Ultra-Fab Products Camper Jacks

  • Availability of Replacement Inner Leg for RBW Landing Gear
    RBW landing gear were originally manufactured by AL-KO. Unfortunately replacement parts for these landing gear are no longer produced or available from etrailer. For a replacement set, which you will need unless you can find another source for an inner leg, the Ultra-Fab unit you referenced, part # UF17-943010, is an excellent choice. This dual-motor unit allows for easy leveling of your Terry and offers 38-inches of travel along with its 12,000-lb rating. The written instructions for...
    view full answer...
  • Recommended Landing Gear for 2007 Heartland Sundance 3012RE 5th Wheel Trailer
    The Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs # UF17-943010 is a great set to replace your factory landing gear on your 2007 Heartland Sundance 3012RE. I've attached some measurements to assist in ensuring a fit with your trailer based on the factory bracket locations. These jacks work independently and have a lift of 38 inches. When retracted they have a bracket height of 36 inches and when fully extended that bracket height is 74 inches. They also have a...
    view full answer...
    Image 1 for
  • Replacement Landing Gear Leg for 1999 Alfa Gold 35 5th Wheel Trailer
    We do offer replacement legs for 5th wheel landing gear sets, both lead/driver legs and follow legs. Both types of parts are displayed on the linked page. You will want to confirm the brand of landing gear and the overall dimensions of the outer tube as you review the available replacement parts. It is also important to match the weight capacity to the trailer. If you prefer to replace the landing gear you'll want to know the jack outside dimension and distance between the mounting brackets...
    view full answer...
    Image 1 for
  • Is There a Manual Override for the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010
    Since the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 that you referenced does not have that shaft that connects both legs there is no manual override crank for the landing gear set. They are both controlled independently of each other for easier leveling. I did speak to my contact at Ultra-Fab who said that in case of complete power failure you can remove the housing and there is a place where you can use a screwdriver to adjust the legs, but this will take quite awhile....
    view full answer...
  • Will Ultra-Fab Deluxe Electric Landing Gear Work as Replacement on 2009 Keystone Trailer
    If you are looking to replace your existing landing gear, the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 referenced in your question should work great on your 2009 Keystone Trailer. As you referenced in your question, this pair of electric jacks features powerful, 12-volt motors that will function independently of one another for simple and effective leveling. The 12,000 pound weight capacity is more than enough for the weight of the trailer. I have attached an image that...
    view full answer...
    Image 1 for
  • Quantity of Ultra-Fab Deluxe Electric Landing Gear Set
    The Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 come in a pair, they are dual electric jacks. Each of the legs have motors so they operate independently, allowing you to get as level as possible. I've added a link to a video review of this product for you to take a look at.
    view full answer...
    Image 1 for
  • Will Ultra-Fab Deluxe Electric Landing Gear, # UF17-943010, Fit a 2003 Keystone Challenger
    The Ultra-Fab Deluxe Electric Landing Gear, # UF17-943010, has brackets that are designed to be welded to the vertical part of a 5th wheel trailer frame beneath the overhang. This makes it a universal type of application and should work well for your 2003 Keystone Challenger. You just have to inspect the trailer for the best place to weld the brackets.
    view full answer...
  • Would the Ultra-Fab Electric Landing Gear # UF17-943010 Fit a 2006 Forest River Cardinal 33LE
    Yes, the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 that you referenced would work well for your 2006 Forest River Cardinal 33LE. I checked the dry weight of your trailer and this jack set should have plenty of capacity. To install this you will need to Weld hangers to front of trailer frame, beneath overhang Bolt jacks to hangers Mount switches anywhere on trailer for easy access
    view full answer...
  • Will Ultra-Fab Deluxe Electric Landing Gear Set Fit an Open Range 391RES Trailer
    The Ultra-Fab landing gear, # UF17-943010, is designed to be mounted to the vertical parts of the trailer chassis on a 5th wheel trailer under the overhang. Provided that you can attach the brackets to the chassis under the overhang then you can install landing gear like # UF17-943010. The mounting brackets will need to be welded to the frame. Welding should be performed only by a qualified professional welder. The jacks will then bolt to the brackets.
    view full answer...
  • Will Ultra-Fab Landing Gear Fit a 2008 Weekend Warrior 5th Wheel Trailer
    There may be s ticker or something in the literature for the trailer that states the capacity of the existing landing gear. You would want to match or exceed that capacity with the new landing gear. Provided the frame has steel vertical frame members, most likely it does and that is where the old landing gear is attached, you will attach Ultra-Fab landing gear # UF17-943010 in the same places. The brackets that attach to the trailer will need to be welded on. Welding should be done by a...
    view full answer...
  • Is Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 Suitable for Heavy Equipment Gooseneck
    The Ultra-Fab Deluxe Electric Landing Gear Set you referenced, part # UF17-943010, is suitable for use on both 5th wheel and goose neck trailers. This dual motor landing gear set has a combined capacity of 12,000-lbs so it will work fine on your goose neck as long as its fully-loaded pin weight does not exceed this 12K rating. Installation consists of welding on the hangers to the front of the trailer frame (below the overhang). You will want a certified welder to do this. Then you will...
    view full answer...
  • What is Required for Installation of Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010
    Installation of the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 requires three steps for installation: 1) welding on the jack hanger brackets to the front of the trailer frame under the overhang, 2) bolting the jacks assemblies to the hanger brackets and 3) wiring the two independent power switches to your 12V power source. Together these two powered landing gear jacks have a 12,000-lb capacity for leveling and stabilizing your trailer. They cannot be used to lift the entire...
    view full answer...
  • Can the Ultra-Fab Landing Gear Set # UF17-943010 Be Operated Manually if Needed
    Yes, in case of a power failure, the levelers of the Ultra-Fab Landing Gear Set # UF17-943010 can be operated manually by removing the four screws that hold the motor/gear assembly. The slotted shaft can then be turned with a large flathead screwdriver. When replacing the motor, mesh the assembly into the slotted shaft, then rotate assembly to align the screws with their respective holes.
    view full answer...
  • Will an Ultra Fab Landing Gear fit a Trailer that has an Atwood Set Currently Installed
    Ultra Fab landing gear like the # UF17-943010 use a larger dimension for the mounting tabs than the Atwood. Lippert, Venture, and Atwood landing gear, as well as those from a few other manufacturers use 17-1/2 inches but Ultra Fab uses 20-1/4.
    view full answer...
  • Bracket Spacing of Ultra Fab 12K Fifth Wheel Landing Gear
    In order for a 'right out of the box' fit for the Ultra-Fab # UF17-943010 fifth wheel landing gear, the underside of your top mounting bracket and the underside of your bottom mounting bracket would need to be 19-1/8 inches apart, as shown in the provided photo. Relocating the brackets is something a certified welder could complete in a matter of moments for minimal cost.
    view full answer...
    Image 1 for
  • Troubleshooting Power Failure on a Ultra-Fab Deluxe Electric Landing Gear
    Good news! In case of a power failure malfunction, the landing gear can be operated manually by removing the four (4) screws that hold the motor/gear assembly. The slotted shaft can then be turned with a large flathead screwdriver. When replacing motor, mesh the assembly into the slotted shaft, then rotate assembly to align the screws with their respective holes.
    view full answer...
  • Overall Height Including Motor of Ultra Fab Landing Gear UF17-943010
    According to my contact at Ultra-Fab, their Deluxe Electric Landing Gear Set # UF17-943010 has an overall height, including the motor assembly, of 36.55-inches with the leg fully retracted. Please refer to the linked diagram for the rest of the dimensions you requested. What you see are the dimensions we got from Ultra Fab. The width between the clamps will be the same as the distance from outside to outside on the mounting tabs, 14-1/2 inches.
    view full answer...
    Image 1 for
  • Recommended Landing Gear For 2009 Holiday Rambler Trailer
    I would recommend replacing the landing gear you have on your 2009 Holiday Rambler with a new set like the Ultra-Fab Deluxe Electric Landing Gear, part # UF17-943010. This system has a combined weight capacity of 12,000-lbs and has a retracted height of 36 inches with an extended height of 74 inches. This system uses 12V power so there is no more hand cranking to raise and lower your trailer. Each jack has its own toggle switch so you are in control.
    view full answer...
  • Powered Landing Gear Option for Gooseneck Trailer
    For gooseneck trailers the only way you'll find a powered jack setup is to go with a landing gear setup. Landing gear mount on either side of the front of the trailer frame. Most likely your trailer has mounting tabs but even if it doesn't you could have them welded on. The Ultra Fab Powered Landing Gear kit part # UF17-943010 is a very popular option that would work well. These have a combined 12k capacity which would make easy work of your 3,000 lb pin weight. You would want to take...
    view full answer...
  • Recommended Electric Gear Landing Set for a 2007 Victory Lane 36 SRV
    The strongest landing gear set that we currently offer is the Ultra-Fab Electric Landing Gear Set # UF17-943010 which is rated for 12,000 lbs. Keep in mind that these are used to support only a portion of your trailer's weight, not the full GVWR of your trailer. The legs operate independently from each other to make leveling your trailer more accurate, plus they have a built-in clutch to prevent damage from overextension. From the top of the highest bracket to the bottom of the middle...
    view full answer...
    Image 1 for
  • Electrical Wire Setup For Boat Trailer Using Landing Gear As Trailer Jack
    The Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs # UF17-943010 is not designed for boat trailers, but will easily do the job. Unfortunately, the jack will pull too much power for your trailer connector to be utilized without overloading your vehicle wiring. I recommend using a second battery preferably a deep cycle battery for this application like you would use for a 5th wheel or travel trailer for proper operation of this landing gear.
    view full answer...
    Image 1 for
  • Troubleshooting Tips for Powered Trailer Jack that Stopped Working
    In nearly every case of a powered jack not working the problem is ground related. See if you can improve the ground of the jack and you should see it start working. Some ground through the mounting hardware so make sure it's connected to a clean metal surface and the main ground wire of the trailer wiring connector is connected properly. Also you need to verify that the power wire of the jack has 12 volts of power.
    view full answer...
  • Is Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 Waterproof
    The Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 that you referenced is weather proof enough that as long as you didn't submerge the landing gear underwater the jacks would be just fine. Rain and snow wouldn't be an issue at all.
    view full answer...
  • Does Ultra Fab Landing Gear kit part # UF17-943010 Have Capacity for Trailer that Weighs 14,730 lbs
    The pin weight of a fifth wheel trailer is normally right at 20 percent of the total trailer weight. If your trailer weighs 14,370 lbs it would have a pin weight around 2,874 lbs which would easily be compatible with the Ultra Fab Landing Gear kit part # UF17-943010 that has a 12k capacity.
    view full answer...


< Previous
123. . .13



Do you have a question about this Camper Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Rachael H
Expert Research:
Rachael H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Victoria B
Expert Research:
Victoria B
Employee Lindsey S
Written by:
Lindsey S
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Halie H
Updated by:
Halie H
Employee Noah M
Updated by:
Noah M
Employee Eric H
Updated by:
Eric H
Employee Manda E
Updated by:
Manda E
Employee Cole B
Installed by:
Cole B
Employee Michael B
Installed by:
Michael B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-496-5010