Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer - Steel - 31" to 54" - 5,000 lbs
(205 reviews)
Price: $131.95
In Stock
Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer - Steel - 31" to 54" - 5,000 lbs
Item # UF19-950500
Our Price: $131.95
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (205)
- Q & A (0)
- Photos
Ultra-Fab Products Camper Jacks - UF19-950500
- Fifth Wheel Camper
- Stabilizer Jacks
- Tripod Stabilizer
- 4001 - 5000 lbs
- 1 Jack
- Ultra-Fab Products
- Not Mounted
- Steel
Quickly and easily stabilize your unhitched fifth-wheel trailer with this sturdy steel tripod. Adjustable hitch cup makes setup a snap.
Features:
- Tripod holds your parked 5th-wheel trailer steady at the king pin
- Helps to eliminate front-to-back and side-to-side motion of unhitched trailer or RV
- Threaded hitch cup allows for easy height adjustment
- Turn the handle counterclockwise to raise cup, clockwise to lower it
- Holes in hitch cup provide a space for a padlock (sold separately) to prevent removal of king pin
- Collapsible design
- Tripod folds up for storage
- Extension legs (UF19-950002 - sold separately) available for applications requiring additional height
- Large footplates help to prevent sinking and tilting
- Heavy-duty steel construction
Specs:
- Support capacity: 5,000 lbs
- Height: 31" - 54"
- Footplate dimensions: 5" wide x 5-1/2" long
- King pin cup measures 3-1/4" across and 4-1/2" deep
- Fits king pins up to 3-1/4" diameter
- Weight: 29 lbs
- Lifetime warranty
After unhitching your fifth-wheel trailer or RV, steady it with the Ultra-Fab tripod stabilizer. Simply position the tripod beneath your trailer's king pin and adjust the height of the stabilizer hitch cup so that it surrounds the king pin. Use the handle on the hitch cup to fine-tune the height of the stabilizer. Turn counterclockwise until the cup is sufficiently snug against the fifth-wheel king pin. Once everything is in place your trailer will be stable and supported.
19-950500 UltraFab Economy Kingpin Stabilizer - Steel
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Arrived Damaged
- etrailer mistake
- Wrong item was ordered
Customer Reviews
Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer - Steel - 31" to 54" - 5,000 lbs - UF19-950500
Average Customer Rating: 4.8 out of 5 stars (205 Customer Reviews)
Quickly and easily stabilize your unhitched fifth-wheel trailer with this sturdy steel tripod. Adjustable hitch cup makes setup a snap.by: Rick08/16/2023
Made in the USA, decent effective range, quality construction. What more could someone want?
That said, this is heavy so eTrailer shipped it via UPS. UPS destroyed the package, taped it up, and then proceeded to destroy it again. Luckily, I was only missing one small piece of hardware that is easily sourced locally. Keep that in mind if UPS destroys packages in your area.
by: Bradley 10/06/2023
Easy to setup and takedown. Well built and quite strong. Makes a noticeable difference in the stability of my 5th wheel and reduces movement. I’d definitely buy it again, no regrets.
by: Bob 10/14/2023
This a sturdy jack that provides stability to the front of the 5th wheel.
by: Stephen03/30/2023
I haven't used it yet. I had one a few yrs ago and it worked great. I switched out the 5th wheel hitch to a Gooseneck so I'm not sure how this will work with it.
Jenny N.
3/31/2023
First, congrats on the Gooseneck trailer! Ultra-Fab makes a gooseneck tri pod stabilizer part # UF19-950450. What I found is that you do not have to buy a whole new stabilizer. You can buy part # UF19-001057, which is the ball portion of the stabilizer, and convert the king pin tri pod over to a gooseneck tri pod.
by: Shane Ellison10/03/2022
I purchased this for a 2021 Grand Design 31MB 5th wheel. The King Pin tripod along with the X-chocks I purchased from e-trailer were a perfect match/fit for our 5th wheel. We immediately noticed the difference with these installed just as described in the video on e-trailers web site. Thank you e-trailer for your awesome customer service and abundant information for items when making a decision for purchase!
by: Larry01/25/2021
I am quite satisfied with the quality and functionality of this product. However, the product brochure and other information about the product indicated an appropriate security padlock was included with the product. I didn’t receive such a padlock. I’ve checked at Home Depot, Walmart and Gibson’s and have not been able to locate a padlock which fits in the hitch cup. Can you assist me in securing a padlock which fits? I am attaching a picture of the hitch cup with pre-drilled holes for the padlock. Thank you in advance for your assistance.
Heather A.
1/26/2021
Thank you for your review. Unfortunately the padlock does not come with the Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer any longer. If you would like to purchase a padlock at the hardware store the holes are 1 apart so you would need padlock that is 1 wide.
by: John07/11/2023
Does the job helps to stabilize the front of my 5th wheel.
by: Anthony04/08/2023
Super easy assembly and install/set up. Solid construction. Highly recommended for the price.
by: Floyd 02/09/2023
Yes, it did stabilize the 5th wheel. Especially when the spin cycle on the washer is running.
by: Jason R. 01/18/2017
I ordered the tripod just to get some extra stability on my 5th wheel camper. As soon as it came in I put it on and it made a HUGE difference! The front end of my camper used to have a little wobble to it and didn't feel very sturdy but now it feel 100 times more stable. I haven't had the tripod very long so I can't comment on weather or not it's extremely durable but it seems to be very well made.
by: Matt O05/21/2020
Still working good. The only thing that I noticed on this is around the top were the legs go into the top there is rust and paint flaking off. We full time so it’s been from Cali to NY in the weather all year.
by: Joshua 05/03/2023
You need this especially if you have a washer in your rig
by: Bruce08/24/2023
Works great.
by: Wayne G.10/06/2017
Light and easy to use. Thanks e-trailer.
Huey G.
10/6/2018
Excellent. Really helps stabilize my rv. Recommend to anyone with 5th wheel. Also great security lock.
by: Wayne K02/07/2019
The tripod stabilizer is easy to set up and stores easily in original box. It definitely makes a difference as far as wiggle and shake inside the coach. A fifth wheel needs support under the hitch when parked, there's too much overhang past the stabilizer feet on the main frame of the coach.
I feel the unit could have been a heavier built to take more weight but I have had it tight and it held!
Wayne K.
2/8/2020
The stabilizer offers good value for the money. Still working well, havent used the extensions yet. Etrailer is a good company to do business with.
by: Ed03/31/2022
My order shipped on time, as promised but the package arrived damaged with missing parts.I called etrailer and talked to Carol,I sent pictures and after verification Carol sent me a whole new 5th wheel stand.The damage occured by the transport co. Who taped both ends of the box but left mutiple holes in the box where some parts were missing.I was surpised the carrier even deliverd the package that damaged, they should have taken care of it, by replacment on their own. The box was sturdy and proper for the product but was crushed during transit. Carol sent me out a brand new complete one right away instead of just the parts that were missing. I have used etailer for several rv parts and I will continue using etrailer in the future, they stand behind their product after the sale...thank you etrailer and Carol.
by: Darrol05/20/2018
My 5th wheel was constantly shaking when walking inside the trailer. Once I install this "Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer", the shaking stopped. I could not be more happy with this product. I highly recommend this Tripod.
Darrol
5/20/2019
I am very happy with this product, I would recommend this Tripod to everyone that has a 5th wheel.
by: Toby 08/19/2022
simple to install under your king pin on the 5th wheel the finish fit welds simple to carry and stow
by: Ronnie 04/26/2023
Would recommend.
by: Steven11/06/2018
It heavy duty and works great to stabilize my 5th wheel. I purchased the ball assy so I can use this with my Anderson hitch setup. I also had to purchase the leg extensions so it would work with my 2018 Genesis Supreme 28CR Toy Hauler. The negative is it's heavy and awkward to store for travel. It does not come with a travel bag. I carry it in the back of my truck due to the sharp edges on the foot pads.
by: Nolan12/15/2021
Ordered this product to provide more stability in our 5th wheel, as it was quite wobbly... Packaging was damaged, both exterior and interior box. The retaining pin for one of the feet was missing and the the exterior box had been taped up where the damage was. Won't be until after the third foot is attached that I will know if it provides stability to the front of trailer.
Jenny N.
12/16/2021
I will have our customer service team reach out to you.
by: Lee07/26/2022
Packaging was horrible and instructions were very vague. Had to figure it out on my own.
Jenny N.
8/1/2022
Sometimes with these type of products the manuals are less than ideal. I recommend watching the video review listed below.
by: James 04/22/2023
Ontime and works great.
by: Steve S.04/17/2019
Really stabilizes the front of 5th wheel. Easy to setup and take down. Very happy with it.
Steve S.
4/20/2020
Have had no problems, works good either at its minimum or maximum height.
by: Kim08/01/2018
We are so happy with this tripod and replacement ball assembly. We were happy to be able to find a product that we could use with our 5th wheel hitch. It is so easy to use and gives us the extra stability we were hoping for. Thank you!
25
205
Show More Reviews
See what our Experts say about this Ultra-Fab Products Camper Jacks
- Can Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer be Used on Trailer w/Auto-Leveling SystemUltra-Fab Economy 5th Wheel King Pin Tripod Stabilizer # UF19-950500 should be used to supplement the existing leveling system on a trailer whether it is manual or automatic. What you would do is operate the leveling system on the trailer like you normally would and then use the tri-pod stabilizer for additional support. Customers with trailers that have living quarters in the overhang have stated that the tri-pod stabilizers have made things, well, more stable!
view full answer... - Determining If Ultra-Fab Economy 5th Wheel King Pin Stabilizer UF19-950500 Fits 5th Wheel TrailerThe Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer - Steel - 31" to 54" - 5,000 lbs # UF19-950500 you were looking at will likely work to support the king pin of your trailer, but you cannot leave your Pullrite 2100 Series 5th wheel hitch attached. The # UF19-950500 fits trailers that measure between 31" - 54" to the bottom of the king pin, so as long as your trailer has a measurement in that range this will work perfectly. You will need to unhitch your trailer like normal, then...
view full answer... - Weight Capacity of Ultra-Fab Economy 5th Wheel King Pin Tripod # UF19-950500The Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer # UF19-950500 referenced in your question has a support capacity of 5,000 pounds. This tripod will allow you to quickly and easily stabilize your unhitched fifth-wheel trailer. It features an adjustable hitch cup that allows for simple setup and the included padlock will help deter theft. Just note that the tripod is meant to stabilize the front of the trailer and not support all of its weight. I have attached a short video demonstration...
view full answer... - What is Inner Dimensions of Cup on the Ultra-Fab Economy 5th Wheel King Pin Tripod UF19-950500The cup of the Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer # UF19-950500 that you referenced has a diameter of 3-1/4 inches across and and a depth of 4-1/2 inches.
view full answer... - Using Ultra-Fab # UF19-950500 To Support Pin Weight of 14K Fifth WheelThe Ultra-Fab # UF19-950500 stabilizer is meant to supplement the landing gear of your fifth wheel, it's not meant to support the pin weight of the fifth wheel on its own. Your best bet would be to find somebody who has a truck equipped with a hitch, and use the truck to support the fifth wheel as you make the level adjustments.
view full answer... - Recommended Tripod Stabilizer For Fifth Wheel King PinWe do offer fifth wheel king pin stabilizers. The stabilizers we have are adjustable and have different weight capacities. I have attached a link to our product page that has the stabilizers we offer. I recommend the Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer, part # UF19-950500. This adjusts from 31 to 54 inches and has a weight capacity of 5,000-lbs.
view full answer... - Height Adjustability of Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer # UF19-950500The height adjustability of the Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer # UF19-950500 that you referenced is 31" - 54".
view full answer... - Tall Fifth Wheel Stabilizer AvailabilityWe do not carry that brand nor do we carry extensions for the stabilizers. You might just need to go with a taller stabilizer. The tallest one we have is the part # UF19-950500 which is adjustable up to 55 inches.
view full answer... - Recommended King Pin Stabilizer for 5th Wheel Trailer with Living Space in Front of Landing GearThe Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer - Steel - 31" to 54" - 5,000 lbs # UF19-950500 is made of steel. This tripod is a great support to increase the stability of the 5th wheel trailer that has a large overhang that would sit over the bed of the truck. Because the landing gear is so far back on many models, especially those with slide outs in this location, the increased stability at the king pin will keep your trailer more level and will keep it from rocking when...
view full answer... - Can Ultra Fab Tripod Stabilizer be Used with Andersen Ultimate Connection AdapterThe Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer - Steel - 31" to 54" - 5,000 lbs # UF19-950500 will not fit with the attachment for your Andersen Ultimate in place. However, if you want to keep that hitch attachment in place, you can use the Replacement Gooseneck Tripod Ball Assembly for Ultra-Fab 5th Wheel King Pin Tripod Stabilizer # UF19-001057 to make it work on your system.
view full answer... - Leg Extension Recommendation for Ultra Fab Economy 5th Wheel King Pin Tripod StabilizerFor the part # UF19-950500 that you referenced we do have extension legs available as part # UF19-950002. At one point they were not listed as a fit by Ultra Fab but that has since changed so we can recommend them as a fit for you. These extensions will give you up to an additional 8 inches.
view full answer... - Can the Ultra-Fab Economy Tripod Stabilizer be Used with a Gooseneck TrailerThe Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer part # UF19-950500 does not come with a gooseneck hitch ball nor can it be ordered with one but you can use the Replacement Ball Assembly part # UF19-001057 and add it on separately.
view full answer... - Ultra-Fab Steel Tripod Stabilizer ExtensionsSince you have the steel tripod stabilizer, # UF19-950500, you would need the steel extensions # UF19-950002. Like you said, the extensions are 8 inches long. There are a total of 3 extension pieces included and each of those is 8 inches long.
view full answer... - Can You Put A Replacement Ball Assembly On The Ultra Fab Tripod StabilizerThanks for the questions, I did some research and found a solution for you. **Ultra-Fab Gooseneck Trailer Tripod Stabilizer - Steel - 31" to 54" - 5,000 lbs # UF19-950450. You can not find the replacement ball mount for the other product because it is no longer available. However, this unit will work for any gooseneck that's 31-54 inches from the ground.
view full answer... - Tripod Stabilizer for Fifth Wheel Pin Box with Andersen Ultimate Connection AdapterThe Replacement Ball Assembly # UF19-001057 that you referenced can be used with an Andersen Ultimate fifth wheel adapter but it has to be used with an Ultra Fab stabilizer like the # UF19-950500 since we can't guarantee it would work on an EAZ tripod.
view full answer...
- Replacement King Pin Cup for Ultra-Fab Economy 5th Wheel Tripod Stabilizer, part # UF19-950500UltraFab does offer a replacement King Pin Cup for their Economy 5th Wheel King Pin Tripod Stabilizer, part # UF19-950500. The replacement King Pin Cup part consists of the cup and threaded post, which are one assembly. This product is on our website and the part number is # UF19-001081.
view full answer... - Will Ultra-Fab Extension Kit # UF19-950002 Work With Ultra-Fab Stabilizer Tripod # UF19-950500According to my technical contact at Ultra-Fab, the steel extension kit # UF19-950002 will work with your Ultra-Fab Tripod Stabilizer # UF19-950500. The extension kit gives you an additional 8 inches for your tripod.
view full answer... - Is There a Tripod Stabilizer for Fifth Wheel Trailer that is LockableWe have one tripod stabilizer that comes with a lock but we don't have a way to lock other brands of stabilizers. The Ultra-Fab Economy 5th Wheel King Pin Tripod # UF19-950500 actually comes with a padlock. This locks the king pin to the cup of the stabilizer.
view full answer... - Is There a Tripod Stabilizer that Can be Used with Andersen Ultimate Fifth Wheel AdapterTo use a tripod stabilizer with an Andersen Ultimate fifth wheel adapter you'll need to use the replacement ball assembly part # UF19-001057 with an Ultra Fab stabilizer like the part # UF19-950500.
view full answer... - Tripod Trailer Stabilizer Recommendation for Trailer with Andersen Ultimate Connection AdapterDepends on the height of your trailer's pin box that has the Andersen Ultimate adapter installed. If the height of it is between 33 and 43 inches then you could use the part # UF19-950450 as it has a gooseneck ball on top of it already which would be what you need. If you need a taller height though you'd have to go a different route. I instead recommend going with the Ultra-Fab 5th Wheel King Pin Tripod # UF19-950500 and then adding the Replacement Ball Assembly # UF19-001057.
view full answer... - Can The Ultra-Fab 5th Wheel King Pin Stabilizer Be Used To Support Trailer For Leg Adjustments?Yes the Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer # UF19-950500 will work great with your 2022 Alliance RV Paradigm Fifth Wheel. This stabilizer tripod has height adjustments from 37" to 50", a support capacity of 5,000-lbs, and has large footplates to help prevent your trailer from sinking or tilting. Additionally, we also have the: -Leg Extensions for Ultra-Fab 5th Wheel Kin Pin Tripod Stabilizer # UF19-950002 which will provide 8" of additional height should you need it.
view full answer... - Gooseball Assembly To Replace Cup Assembly On Ultra-Fab fifth Wheel Tripod StabilizerI called my contact at Ultra-Fab that makes the tripod stabilizers for fifth wheel trailers and gooseneck trailers. They told me this is a common problem when folks need have a fifth wheel stabilizer and now need a stabilizer for a gooseneck trailer. If your tripod is either an Ultra-Fab # UF19-950500 or # UF19-950200, and they have been manufactured after 2014, we have a replacement ball assembly that will work. The ball assembly is part # UF19-001057.
view full answer... - What Size Is Replacement Ball Assembly for Ultra-Fab StabilizersThe Replacement Ball Assembly part # UF19-001057 for Ultra-Fab Gooseneck Tripod Stabilizer that can be used with the Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer part # UF19-950500 is a 2-5/16" ball. We also carry the Ultra-Fab Gooseneck Trailer Tripod Stabilizer part # UF19-950450 that already comes with the 2-5/16" ball.
view full answer...
- Which Tripod 5th Wheel Stabilizer Can be Used with an Andersen Ultimate Connection AdapterTo use a tripod stabilizer with an Andersen Ultimate fifth wheel adapter you'll need to use the replacement ball assembly part # UF19-001057 with an Ultra Fab stabilizer like the part # UF19-950500. There isn't a way to use the Husky tripod with the Andersen Ultimate.
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Written by:
Lindsey S
Video Edited:
Jacob T
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Halie H
Updated by:
Noah M
Updated by:
Eric H
Video by:
Dustin K
Installed by:
Hayden R
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
8/22/2023
It does sound a like the box had a bit of a tumble. Customer Service will be in contact with you.