bing tracking image
  1. Camper Jacks
  2. Ultra-Fab Products
  3. Stabilizer Jack
  4. Slide-Out Supports
  5. 5001 - 6000 lbs
  6. 17 Inch Lift
Ultra-Fab Stackable Stabilizers for Small Trailers and Campers - 6,000 lbs - Qty 4

Ultra-Fab Stackable Stabilizers for Small Trailers and Campers - 6,000 lbs - Qty 4

Item # UF48-979004
Retail:$78.76
Our Price: $61.02
You Save: 23%
Camper Jacks
This item qualifies for Free Shipping
Shipping Weight: 8 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
These unique jacks extend from 11" to 17" and support up to 6,000 lbs each. Stackable design means that they take up less space when stored. For stabilizing only - do not use for lifting. 1-636-306-4830 to order Ultra-Fab Products camper jacks part number UF48-979004 or order online at etrailer.com. Free expert support on all Ultra-Fab Products products. Guaranteed Lowest Price and Fastest Shipping for Ultra-Fab Stackable Stabilizers for Small Trailers and Campers - 6,000 lbs - Qty 4. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (277)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

Ultra-Fab Products Camper Jacks - UF48-979004

  • Stabilizer Jack
  • Slide-Out Supports
  • 5001 - 6000 lbs
  • 17 Inch Lift
  • 4 Jacks
  • Ultra-Fab Products

These unique jacks extend from 11" to 17" and support up to 6,000 lbs each. Stackable design means that they take up less space when stored. For stabilizing only - do not use for lifting.


Features:

  • Stabilizers help support your small trailer or camper when it is parked
    • Do not use for lifting
  • Stackable design minimizes required storage space
  • Simple setup
    • Place beneath trailer and extend up by turning handle until threaded extension is raised to appropriate height
  • Die-cast aluminum construction is strong, sturdy and rustproof


Specs:

  • Weight capacity: 6,000 lbs per stabilizer
  • Height adjustment: 11" - 17"
  • Quantity: 4 jacks
  • Lifetime warranty


48-979004 UltraFab Stacker Jacks - 4 Pack





Video of Ultra-Fab Stackable Stabilizers for Small Trailers and Campers - 6,000 lbs - Qty 4

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Ultra-Fab Small Trailers and Campers Stackable Stabilizers Review

What's up everybody It's AJ with etrailer.com. Today, we're gonna be checking out these stacking stabilizers from Ultra-Fab. Now these are gonna come in a kit of four or two, depending on what you need, and what you can use them for is we've got them put underneath our enclosed trailer today, and that's just gonna help stabilize it. Now it's not lifting it up off the ground, but they're there and tightened up to the bottom of the trailer so that I can walk around, back and forth inside. And there's not gonna be side to side or front to back movement. It really does work and stabilizes everything.

That way, it's just a little safer while you're in there messing with it. Let's check it out. Just goes all the way up here to the frame and acts as a kind of a stand. So again, it's not lifting this up. This isn't a floor jack or anything like that.

This is a stabilizer. So, you tighten it up to the bottom of the frame, just enough to stabilize everything underneath. So we've got two up front and two on the back, and it's gonna allow me to walk around in there and not have the trailer shift back and forth on me. Now let's test it out. We're gonna remove the stabilizers and we're gonna show you how much the trailer moves back and forth without them.

So we're gonna get an outside shot. And then later on, we're gonna show you the inside. But right now I'm just gonna walk in there and go back and forth, and you're gonna see the trailer move a whole bunch. So I'm just kind of shaking it with my feet right now. You should see it moving side to side.

It's pretty easy to do. Not to mention walking side to side in the trailer. That just moves it back and forth. And then hopping from side to side, definitely moves it back and forth. Now that we're inside, we went and set up a level just to further show you how much movement there is. Now camera man Aiden's in here with me. So the camera is gonna get a little shaky, but you'll at least be able to see the side to side movement on that level. And how much just walking around and jumping around in the trailer moves that level. Now we've got the stabilizers set back up on our enclosed trailer. I'm gonna go back inside and show you how much it does not move anymore. So we've got two on the front and two on the back. I'm just gonna hop in, kind of walk around like I did before. You probably aren't seeing much out there because I'm definitely not feeling much as I walk around. It feels way more sturdy and I'm just walking around right now. I'm not jumping yet. But then I'll jump back and forth. I'm looking at the level while I'm in here. That bubble is barely even moving, even when I jump around. So that just shows that they are actually working. Back inside, just want to show you the level. So I'm just gonna walk around again, and then I'll start to jump back and forth here in a second. You see, as I'm walking around the trailer, that bubble's barely moving. So now I'll kind of hop back and forth. Might be moving just a little bit, but I just don't feel it at all on the floor as I'm going back and forth. And so that bubble's not moving that much at all. Once again, I'm just gonna kind of walk around all over here, just to show you there might be slight movement, but it feels so much more sturdy. This way I can walk around. There's not any movement. And I'll kind of hop back and forth. You're not seeing much movement at all. This is a great option if you have a work trailer. So we have our enclosed trailer. If you we're to pull this up on your job site and you have people coming in and out of it all day, not to mention hauling heavy equipment out, that's gonna make it shift back and forth, and where it's not gonna fall over or anything, but it's so much better with those stablers on there. So let's say you're pulling out a big old generator. It's not gonna add that more movement back and forth as you're moving that around inside here. You can just get it out of here and it's not gonna shift things around. Now we're at our camper. We went ahead and installed it on here. There's some different things going on with a camper. Most of the time there's people walking around back and forth inside. You might have pets or even kiddos running around. It's gonna be lot of side to side movement. And you want to kind of help stabilize that. Most new campers already have scissor jacks installed on them like this. So then you wouldn't need the stabilizer here. But some older campers don't have them on there. So then you have a choice you can make. You can go with some scissor jacks or stabilizers. I'm gonna kind of just go over some pros and cons real quick of both of them. The scissor jack's nice because it's already gonna be here in place at the bottom of your camper. So all you have to do is get the tool out of the basement door and lower them that way. Now you could get automatic ones too, where you can push a button and it lowers them. Or that's gonna require, that goes into installation. So with installing these, you're gonna have to drill into the frame for some of them. You might have to weld, so you're gonna need a welder. Or if you're doing the automatic ones, you're gonna have to run some wires back and forth to get it to be that push button. That's not something you're comfortable with or not something you want to invest in, you can go this route instead. It's far easier to install this. You just run, turn the screw. And the bolt goes up here and holds or pushes up against the frame, sorry. And that's how it stables that there. And then when you're done, you just mainly go all the way back down with it. And they're also gonna store inside of each other. So it'll only probably take up about that much space with them all collapsed inside each other. So it's not that much more room than the tool that you've used in the basement. I know that one's probably more like a rod, but this one's gonna be a little bigger like this. So that's gonna fit in your basement, but you're gonna have to have the space for it. I get it, but it's not that bad. So between both of them you have to make those choices. Now, it also depends on is your camper a bigger camper Then I probably wouldn't go with the stabilizer here. The bigger the camper, the more stabilization it's gonna need. So I'd probably go with the scissor jack, especially 'cause you can add onto them with different accessories, like crossbars that go across there and really take that side to side out. And a more permanent installation is probably best for something that big. One limiting factor may be height though. Just in case your trailer or your camper sits up a little high. This can only adjust from all the way, being all the way down would be 11 inches, and fully extended would be 17 inches. So that's how much you have to work with here. I just want you to keep that in mind, maybe check out how low your trailer sits to be level before you decide if you're gonna go with this or not. This is what you're gonna get with the kit. So there's gonna be four of these. It's gonna be the stand and this is gonna be the pole. You just put through here. You see it's got a cutout for the nut there, and that's what it's gonna go fit down into. That way it holds the nut in place as you turn this, and it either extends or retracts the bolt. You have the handle here. That just goes in the side. Fits in there. And it's got a little indention there. So that's how it catches. And you can easily turn it to again, raise or lower it. So, that being said, we can loosen this up and slide it underneath the trailer. You want to make sure it pushes up against the frame. Now you don't have to turn it a whole bunch when you're doing it. Just a little bit, because again, it's not lifting the trailer up. It just using it for the trailer to sit down on to stabilize. So let's come back through here. Looks like we're going right about here. A little more towards the inside. Try and match the one on the other side. And I'll start turning it with my hand this way. You really could probably start using a level, sorry, the handle. Once it makes contact and gets a little harder to turn, you're gonna need that. So right about there, you see it got a little harder for me to turn my hand, and we're gonna make sure we just get a couple more turns on there, so it gets tight. But not too much 'cause again, not lifting it up. So that seems about right there. I can give it a nice shake. You see it's not moving or going anywhere. And the stabilizer's set. Now the overall construction of our stabilizers is gonna be aluminum. So it's gonna hold up to the elements just fine. It's not gonna rust or corrode. And it's gonna have a weight rating of 6,000 pounds per stabilizer. So that just means, most likely it'd be fine on most trailers, just because all that weight. You're not gonna have 6,000 pounds just coming down on this side. It's gonna be 6,000 per each one of the stabilizers. And since we have four on here, that's gonna be more than enough just to make sure and keep this thing level. Another good thing about them being aluminum is that they're super lightweight. I was really surprised at how light they are. You can do it one handed, not a big deal. I guess I was lumping them in with the category of those floor jacks, kinda like we talked about earlier. Those are usually heavier, bulkier. You kinda have to lug them around. This is very small. It's more compact with it all fit into each other like we showed you too, all four of them here with the bolts in the middle, and can easily fit in our basement door. No big deal. Just wanted to show you how it does fit in there really nicely, 'cause obviously there's plenty of room in a utility trailer to put them on any of those shelves, but basement door, fits right in there with room to spare. Well, I think that about does it. Thanks for hanging out..

Customer Satisfaction Score:


Customer Reviews

Ultra-Fab Stackable Stabilizers for Small Trailers and Campers - 6,000 lbs - Qty 4 - UF48-979004

Average Customer Rating:  4.7 out of 5 stars   (277 Customer Reviews)

These unique jacks extend from 11" to 17" and support up to 6,000 lbs each. Stackable design means that they take up less space when stored. For stabilizing only - do not use for lifting.

by:

These Jack's made both building and positioning my teardrop onto the trailer bed easier. At campsites they easily level the trailer. So yes I'm happy.


Comments
They are holding up just fine and doing their job both at campsites and at home.
Robert E - 06/08/2020


by:

I use these jacks to stabilize my trailer especially when loading/unloading heavy yard equipment; they keep everything rock solid. I also use them when parking a loaded trailer overnight to spread the load. Delivery was quick; packaging was perfect and service was first class.




by:

we are using these stabilizers for supporting our offloaded truck camper (adventurer 910db) where we reside full-time ... they are very easy to use, provide excellent support for the truck camper and have eliminated 98% of wobble ... the support structure includes jack pads, e-trailer stabilizer, 2x6 pressure treated lumber, 4x8 3/4 inch pressure treated plywood




by:

I purchased 2 sets of these to level my 1965 Ford F100 truck frame for preparation of installing a Crown Vic front suspension and a Lincoln Mark 8 Independent Rear Suspension. The light weight and adjustment of these made them ideal for my project.




by:

They work great




by:

I agree great product at great price. Used them to strengthen and support my deck. Worked awesome, easy to use.


Comments
Great..even through a huuugge snow
Bridget H - 03/24/2019


by:

I use these stands for extra support under my 9.5' Lance camper off the truck with the jacks down in combination with 2 4x4's. Seem to work fine in that situation. Don't think I'd trust them alone.


Comments
Everything still working great!
James - 04/08/2019


by:

Very happy with the trailer jacks - they’ve kept our 1966 airstream sitting solid on a bed of gravel for a year now




by:

I ordered a cab over camper corner leg, jack. Today they followed up w me! Amazing service then and now. The jack continued to work great. I'm about to order a trailer hitch for my '20 Ford Escape




by:

Simple lightweight Stabilizers. I use them to lower my truck camper onto a simple wooden rack that I built to sit upon the jacks. I get the Truck camper lowered until about an inch or so from where I want it to rest then put the wooden rack and these Jack under it. I adjust the jacks until they are firm against the bottom of the truck camper then lower the truck camper down about another inch so some of the load is on the bottom of the truck camper instead of just the 4 legs. having the bottom supported the camper is also more stable and I have heard it extends the life of the floor. Most people seem to lower theirs onto saw horses but I found that keeps the camper higher in the air than I would like and having the 4 jacks to compensate for the uneven ground is a plus.




by:

I bought the stands to level out my smoker that sits on an uneven pad. There is a water pan inside so being level is important. They have exceeded my expectations!
Thanks for a great product, as advertised
Dave




by:

These jacks are going to work great on my camper. They fit my requirements of small, lightweight and compact. I am building a camping trailer, very lightweight, with the box holding my camp kitchen and other gear and a platform hard shell tent above. The tent deploys out over the tongue so I went with the 4 pack as the trailer will not be left attached to the tow vehicle while camping




by:

I recieved the stabliizers in new condition. Just watched the video and they seem to be easy to use. We plan to stablize our travel trailer when we go camping, just using the built in stablizers let the trailer rock when we would walk around inside. I hope to make the floor solid with these. Will be trying them soon. We tried hydrolic bottle jacks but they loose presure in a short time




by:

Hi George,

Sorry I didn't get
back to you until today, but I do have a good reason, We were camping. As soon as we got the camper unloaded, I opened the jack box and only 4 4 x 6 boards ( out of my box of 12 we used to carry with us, but not any more ) I had the whole camper stable in less than 20 min. Great product, I will let all my fellow campers Know about these jacks. They also don't take up as muck room or weigh as muck as the car jack stands we used to use!

Thanks again.




by:

Purchased in hopes that the trailer would have less wobble when walking around inside. Did not help. Otherwise seem to be ok. Tried them out, wasn’t happy and threw them in the trailer storage. Have not used them or seen them since.


Comments
There are few ways to stabilize your trailer while you are walking around on the inside. The most popular way is scissor jacks that bolt to the bottom of the trailer frame to reduce movement such as part # JSC-24-IND
Leveling Scissor Jack - 24" Lift - 5,000 lbs
$69.14
. This leveling scissor jack handles up to 5,000 lbs and has 24 inches of lift. Another option if you have a 5th wheel or gooseneck trailer is a tripod stabilizer. If the trailer is a gooseneck trailer the ultrafab tripod stabilizer part # UF19-950400
Ultra-Fab Gooseneck Trailer Tripod Stabilizer - Aluminum - 33" to 43" - 1,200 lbs
$239.12
attaches to gooseneck connection of the trailer and holds it steady to eliminate front-to-back and side-to-side motion of unhitched trailer or RV. If the trailer has a kingpin ultra fab tripod stabilizer part # UF19-950001
Ultra-Fab 5th Wheel King Pin Tripod Stabilizer - Steel - 37" to 50" - 5,000 lbs
$150.57
will hold the kingpin steady to prevent movement when parked. To add extra support you can also add super grip wheel chocks part # UF21-001091
Super Grip Chock Wheel Stabilizers for Tandem-Axle Trailers and RVs - Qty 2
$77.38
to prevent rocking when parked.
-- Etrailer Expert Heather A - 11/29/2018


by:

During my tiny home trailer build I used the stabilizers to level the flatbed trailer the tiny home is sitting on. Two old tires on the same side went flat. The stabilizers did not care.




by:

These are a simple and inexpensive solution to the bouncing problem I have in my Mallard M325. I found that by putting the auto stabilizers down, it actually made the frame curve upward in the front and rear, thus leaving a lot of weight on the springs and tires. By adding these jacks forward and behind the springs, it solved our "bounce" problem.
I have to say, I love dealing with etrailer.com. The communication is great on the orders and shipping.
Thank you George.




by:

I used jacks similar to these in the late 60's and early 70's. Glad to see they are still on the market. I purchased a 1976 Scotty Highlander and it is in process of being restored. These jacks are very satisfactory on a smaller trailer. I also got prompt delivery from this company. Price was very reasonable as people who have used jacks are about in the same range as these new jacks. Very glad they are stackable as they will take up very little room when in storage. Be glad when trailer is fully restored so I can start using my jacks.




by:

They work great for the price. They stack easily for storage and do a good job holding it once its leveled.




by:

Love these little jacks for my 1966 RoadRunner! Super lightweight and stackable!!!
Reasonably priced. One in each corner of my camper keeps it stable with very little movement when I walk around the camper. I put hard plastic squares under the jacks when I'm on soft ground.




by:

LOOKIN GOOD,
After one year, I can only
distantly remember my plight with the problem of leveling my 1500 dodge (light rig) with the 30 ft. travel trailer. Your simple, most economic solution (and I did it myself in 15 min.) by adding the rubber supports to the rear suspension makes me the straightest shooter on the road, thanks! Ken




by:

I got these in the mail super fast. I had ordered them and was not expecting to have them before I headed out camping a week after ordering them, they were in my hands in three days which was awesome. I was looking for an affordable alternative to scissor jacks and these are them. These jacks are really compact easy to use and store. I have been doing a major rebuild of my trailer and have not had proper stabilization, but these made the trailer very solid. I like the wide base on them, we were set up in an area where the ground was soft and these did not dig in or sink at all. Easy to adjust and set up. These are a great option for stabilization, planning on buying a couple more for additional support along the sides.




by:

I used these jacks under a 6x12 box trailer that I use as a jobsite shop and tool storage. I've owned a lot of trailers, and consequently jacks. These are among the nicest I've seen. Make sure the size is appropriate for your trailer.




by:

They are light and handy, but you had better be pretty strong if you have to bring the trailer up very much on any one corner. For the price, it's a great buy.


Comments
Thanks for the follow up email. The products work fine, although I admit that we have not had as many opportunities to use the jacks as much as we would like. We?ve only done two trips with the trailer since it is a vintage Kenskill in need of some work. It?s roadworthy, but could really use some help.
Abe - 11/17/2014


by:

Well pleased with the Stackable Stabilizers. Got what I ordered and appreciate being notified through out the delivery process. Many thanks etrailer.


Comments
I got these specifically for boondocking with my Truck Camper. I do not use them much, but when I do, they work well.
Wayne E - 02/15/2018

25
277
Show More Reviews

See what our Experts say about this Ultra-Fab Products Camper Jacks

  • How Do the Ultra-Fab Stackable Stabilizing Jacks Part # UF48-979004 Work
    The Ultra-Fab stabilizer jacks work just as you described. The jack would be placed under the trailer, and the handle is rotated until the jack makes contact with the trailer. These jacks are not meant for lifting, they are meant to support the trailer or camper while it is parked. You would want to place the jack under a reinforced portion of the trailer. If the small size of the disk that would contact the underside of the trailer concerns you, a block of wood could always be used to...
    view full answer...
  • Will Ultra Fab Stackable Stabilizers # UF48-979004 Prevent Movement When Walking Across Coachman RV
    The Ultra-Fab Stackable Stabilizers you mentioned, part # UF48-979004 are specifically designed to provide stability for your trailer, thus eliminating the movement felt when you are moving about in the trailer. They would make a good complement to your factory installed jacks. Due to the fact that they do not take up much storage space and their affordable price, the Ultra-Fab Stabilizers are a very popular item.
    view full answer...
  • What are the Dimensions of the Base on the Ultra-Fab Stackable Stabilizers
    I spoke with my contact at Ultra-Fab and she stated that the stackable stabilizers, # UF48-979004, have a base that measures approximately 6 by 6 inches. I made a picture that shows the base dimensions.
    view full answer...
    Image 1 for
  • What is the Diameter of the Round Base on Ultra-Fab Stackable Stabilizers, # UF48-979004
    I went out to the warehouse and measured the round base that contacts the bottom of the trailer for Ultra-Fab Stackable Stabilizers, # UF48-979004. It measures 1-3/4 inches in diameter. I made a video with this information and a picture as well. In terms of using this item to support a door to create a porch on a trailer you will have to determine if the door is rated for the weight associated with being a porch. The construction of the door may not be conducive to porch-ness.
    view full answer...
    Image 1 for
  • Recommended Stabilizing Supports for Enclosed Trailer to Allow Loading and Unloading
    The lightweight and stackable Ultra-Fab Aluminum Stabilizers # UF48-979004 are an ideal way to support and stabilize the corners of your enclosed trailer to allow easier loading and unloading when it is not hitched to a vehicle. These adjustable supports offer a height range of 11- to 17-inches and each one can support up to 6000-lbs. Please refer to the two linked videos for more details and illustration of their use.
    view full answer...
  • Can Ultra-Fab Stackable Stabilizers for Small Trailers and Campers be Used to Hold a Truck Camper
    I don't see any reason that would keep you from using Ultra-Fab Stackable Stabilizers for Small Trailers and Campers - 6,000 lbs - Qty 4 Item # UF48-979004 with your Arctic Fox truck camper. Keep in mind though that these jacks are not designed to lift weight, just to hold it. So you would need to make your adjustments without the camper on the jacks.
    view full answer...
    Image 1 for
  • Lowest Height Setting for Ultra-Fab Stackable Stabilizers UF48-979004
    In the lowest position the Ultra Fab Stabilizers # UF48-979004 is 11 inches tall. The angle of the demo video makes the height appear to be 10 inches but I can assure you that when you look at the right angle the height is 11 inches.
    view full answer...
  • Recommendations for Replacement Stabalizers for Coleman Taos Pop-Up Camper
    I recommend going with the stackable Ultra-Fab stabilizers # UF48-979004. These stabilizers would make a good complement to your factory installed jacks. Due to the fact that they do not take up much storage space and their affordable price, the Ultra-Fab stabilizers are a very popular item. The stabilizers are rated for 6,000 pounds each. As long as you have 11 inches or more between the ground and the bottom of the camper frame these will fit your application. The stabilizers would...
    view full answer...
  • Weight of Ultra-Fab Stackable Stabilizers
    The Ultra-Fab Stackable Stabilizers, part # UF48-979004, weigh 8 pounds when they're shipped but are only 1.85 pounds per stand. I reached out to my conact at Ultra-Fab to confirm this.
    view full answer...
  • Collapsed Height of Ultra-Fab Stackable Stabilizers # UF48-979004
    The Ultra-Fab Stackable Stabilizers for Small Trailers and Campers # UF48-979004 referenced in your question measure 11 inches in height when fully collapsed, before extending. They can then extend to up to a height of 17 inches and can support up to 6,000 pounds each. The base itself measures 6 inches by 6 inches. These unique jacks will work great to help support a small trailer or camper when parked. The stackable design of the stabilizers minmizes the required storage space when they...
    view full answer...
  • What Is the Individual Weight Capacity of the Ultra-Fab Stackable Stabilizers?
    The Ultra-Fab Stackable Stabilizers for Small Trailers and Campers - 6,000 lbs - Qty 4 # UF48-979004 have a load capacity of 6,000 lbs each. They extend from 11- 17 inches tall and are not intended for lifting, but only stabilizing your trailer. These are not intended to be used as jack stands, but the die-cast aluminum is lightweight and sturdy for supporting and leveling the weight as the majority of the load still sits on the axle and tongue jack.
    view full answer...
  • Adjustable Height of Ultra-Fab Stackable Stabilizers for Trailers and Campers
    The Ultra-Fab Stackable Stabilizers for Small Trailers and Campers - 6,000 lbs - Qty 4 # UF48-979004 have a minimum height of 11 inches and a maximum height of 17 inches. They can support up to 6,000 lbs each and have a threaded screw design for the most accurate and precise support not needing to fit certain hole and pin locations.
    view full answer...
  • Can the Ultra-Fab Stackable Stabilizers # UF48-979004 be Used to Lift a Small Truck
    The Ultra-Fab Stackable Stabilizers # UF48-979004 that you referenced have a weight capacity of 6,000 lbs each so they will work to lift a small truck. Just be sure to pick points on the frame that these will have great contact with these jacks.
    view full answer...
  • What is the Height Range for the Ultra-Fab Stackable Stabilizers # UF48-979004
    The Ultra-Fab Stackable Stabilizers # UF48-979004 that you referenced have a height adjustment from 11" - 17" and a weight capacity of 6,000 lbs each.
    view full answer...
  • What Material are the Ultra-Fab Stackable Stabilizers # UF48-979004 Made of
    The Ultra-Fab Stackable Stabilizers # UF48-979004 that you referenced are made of die-cast aluminum that is strong, sturdy, and rustproof. They have a weight capacity of 6,000 lbs each.
    view full answer...
  • Base Dimensions of the Ultra-Fab Stackable Stabilizers # UF48-979004
    The base dimensions of the Ultra-Fab Stackable Stabilizers # UF48-979004 that you referenced measure 6" x 6" at the bottom. I have attached a picture to demonstrate this.
    view full answer...
    Image 1 for
  • How Much do the Ultra-Fab Stackable Stabilizers # UF48-979004 Weigh
    All 4 of the Ultra-Fab Stackable Stabilizers # UF48-979004 combined have a shipping weight of 8 lbs. Since that also accounts for packaging that means they each weigh a little under 2 lbs each.
    view full answer...
  • Max Height For Trailer Lynx Levelers
    I spoke to my contact at Lynx and he informed me that the part # 77433 that you referenced can be stacked up to 5 blocks tall and since each block is 1 inch tall that would mean that you could get a max of 5 inches. The height you are looking for leaves you in an area without a good solution if you do not want something permanently mounted to your trailer. If your trailer was a bit taller you could go with the # UF48-979004 as it can provide 11 to 17 inches of height support. The only...
    view full answer...
  • Can Scissor Jacks Be Used to Stabilize a 31 Foot Class C RV
    Yes, scissor jacks like # UF48-979002 work well as stabilizers for trailers and RVs. You also might want to consider the 4-pack of stabilizers, # UF48-979004. Each one of these has a capacity of 6,000 pounds. They are for stabilizing only and not for lifting. They stack or nest together or easy storage. They are height adjustable from 11 inches to 17 inches. A great option if you do not want something permanently attached to the trailer.
    view full answer...
  • Recommended Leveling Jacks for 2016 Coachmen Freelander RV
    To stabilize your 2016 Coachmen Freelander RV, I recommend looking at scissor jacks like the Ultra-Fab # UF48-979002. These can be either bolted or welded to the frame of your RV and they feature large footplates to provide excellent stability. They include an E-Z crank handle for easy operation and each single jack has a weight capacity of 6,500 pounds. Mounting 4 of the jacks (2 sets) to the bottom of the frame at the four corners of your RV will provide great stability and keep it from...
    view full answer...
  • stabilizing jacks
    On your 1985 Ford Econoline Class C I recommend using the Ultra-Fab Ultra Scissor Jacks part # UF48-979002 they will be a perfect match. The 24" of lift will work even in uneven terrain while camping. They will also make a world of difference when it comes to keeping everything steady and prevent all of the shifting you currently get. When using these they should be attached to your frame. When collapsed they are only 4 3/4" thick if you'll install these to the frame half way between the...
    view full answer...
  • Recommended Camper Trailer Stabilizers for 2017 Livin Lite Quicksilver Tent Trailer
    Any trailer jack or stabilizer has to be mounted to the frame for it to provide upward stabilizing force without causing damage to the exterior/non-structural parts of the camper. The swing-down type jacks on your 2017 Livin Lite Quicksilver are convenient but they do not provide the fine adjustment you can get from a scissor jack. The Atwood stabilizers have extension holes that do give you a range of adjustment but this is limited to the spacing between those holes. A 2-piece scissor...
    view full answer...
  • How to Determine if a Torsion Axle Needs to be Replaced and Lifting a Trailer Off the Ground
    It is certainly possible for any axle to wear out enough over time to need replacing. Since the suspension is built into a torsion axle if the suspension part was to wear out pretty much the only solution would be to replace the axle. If the deflection, or amount of travel of the wheels, on the torsion axle has increased, caused the trailer to bottom out, or is not the same on each side then that would be a good indication that something is wrong. Having the weight off of the tires if...
    view full answer...
  • Recommended Scissor Jack for Boat Trailer
    We do have a nice selection of scissor jacks available like the Ram # TJSC-24 that you referenced, however none of them feature an aluminum or stainless steel construction. These scissor jacks do have a black powder coated finish though that will do a really nice job of resisting corrosion. They have a weight capacity of 2,500 pounds and will work well for your application to add stability to your parked trailer. Another potential option is the Ultra-Fab Stackable Stabilizers # UF48-979004....
    view full answer...


< Previous
12



Do you have a question about this Camper Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Andrew K
Installed by:
Andrew K
Employee Cole B
Installed by:
Cole B
Employee Lindsey S
Written by:
Lindsey S
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Halie H
Updated by:
Halie H
Employee Aidan B
Video by:
Aidan B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.