Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4
(82 reviews)
Price: $206.58
In Stock
Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4
Item # HSAB
Retail:$443.16
Our Price: $206.58
You Save: $236.58
This item qualifies for Free Shipping
In Stock
- All Info
- Reviews (82)
- Q & A (0)
- Photos
- Why etrailer?
Brophy Camper Tie-Downs - HSAB
- Front and Rear Tie-Downs
- Bed-Mounted
- Brophy
- Powder Coated Steel
- Standard Disconnect
Ready your truck to haul a camper with these sturdy tie-downs. Powder coated steel brackets securely clamp onto your truck's bed side rails. Angled design allows for enough clearance to make attaching turnbuckles (sold separately) easy.
Features:
- Tie-downs provide attachment points for securing your camper to your truck bed
- Angled design makes attaching turnbuckles (sold separately) a breeze
- Provides more clearance between tie-downs and truck fenders than standard tie-downs
- Wide clamps provide superior holding strength
- Neoprene pads protect your truck's paint
- Strong and durable steel construction
- Black powder coat finish is corrosion resistant
- Easy to install and remove
- Clamp each bracket onto the bed rails of your truck
- No drilling required
- 4 Camper tie-downs with clamp plates, 12 neoprene pads, and necessary hardware included
- Made in the USA
Specs:
- Application: most full-size, non-dually pickup trucks
- External bed rail width cannot exceed 5-1/2"
- Requires at least 2" of space beneath lip of bed rail
- Not compatible with drop-in bed liners, plastic bed rails, double-walled beds, or side-step beds
- Dimensions: 11-5/16" tall x 3" wide x 3/8" thick
- 8-9/16" From center of bottom mounting hole to center of top mounting hole
- 3-5/8" From center of left mounting hole to center of right mounting hole
- Anchor width: 6"
- 1-Year limited warranty
Installation
Installing these bed-mounted camper tie-downs is simple. First, attach the T-bolts to the bottom interior portion of each tie-down. Place each tie-down on the rail of your truck so that the straight side faces the interior of your bed and the angled side faces the exterior. Adjust the T-bolts until each tie-down sits square on the rail. Then attach the clamp plates to secure the tie-downs to the rails. To do this, position the clamp plate beneath the lip of the side rail so that the lip is between the plate and the straight side of the tie-down. Then insert a carriage bolt on either side of the setup and tighten the nuts on the bolts until the tie-down is securely clamped onto the lip of your bed side rail.
Securing your Camper
In order to secure your camper to your truck bed, these tie-downs will need to be used in conjunction with a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches to the anchors on your camper and to the tie-downs on your truck to keep your camper secure. Once you tighten the turnbuckles appropriately, you will be ready to haul your camper.
HSAB Brophy Heavy-Duty Tie-Downs for Slide In Truck Camper - Black Powder Coated Steel - Angled Design - Qty 4
Customer Reviews
Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 - HSAB
Average Customer Rating: 4.6 out of 5 stars (82 Customer Reviews)
Ready your truck to haul a camper with these sturdy tie-downs. Powder coated steel brackets securely clamp onto your truck's bed side rails. Angled design allows for enough clearance to make attaching turnbuckles (sold separately) easy.
- HSAB
by: Angela08/10/2021
We really enjoyed these camper tie-downs! They were very easy to install, and makes securing the camper (and other items also) so easy! So glad that we found this product, and the company is also great and helpful!
- HSAB
by: Jeff R06/27/2014
I am so happy with your Angled Hold Downs. Especially how they clamp to the bed of my truck and I didn't have to drill any holes. They do a great job and I have no worries when the girls take it camping for the weekend... I do worry about the safety of my pickup though. hahaha
Comments
Haha
-- comment by: April - 07/11/2014
- HSAB
by: Teri04/04/2018
As always my order arrived early. The box was not in great shape but nothing was lost out the holes. Poor delivery guy could barely get it to the porch. I was surprised at how heavy they are. It took me about half an hour to get them installed. I have a 1995 Dodge Ram 2500. The shape of the inside of the truck was a pain to work around. I couldn't set the front tie downs as far forward as I would have liked, but it will work. Haven't got the camper yet but I'm sure they will be perfect. I have seen these on many pickups here in western Colorado. The installation video made my choice easy ...NO HOLES TO DRILL.
- HSAB
by: Paul V.05/06/2020
Product was easy to install, worked great. It held on some pretty knarly roads. etrailer is a great company to work with as well.
- HSAB
by: Excellent05/02/2019
These tie downs worked great for my Toyota Tundra. I was securing a light weight camper.
- HSAB
by: Steven02/13/2021
Mounted on a 2012 f250, it works great, but my jacks are on 7’2” wide so I had to put camper 3/4 way on then put the tie downs on, which was a pain to do, because the hold downs on the truck measured 7’4” wide
- HSAB
Sierra K - 12/23/2021
by: Don12/19/2021
The tie didn’t not very good
Comments
This is a universal fit item but the installation of the hold-downs requires a minimum of 2 inches of clearance between the inside of the truck side walls and the inner lip of the side wall. Its going to fit in most full-size domestic pickup trucks.
-- Sierra K - 12/23/2021
- HSAB
by: Tim mangni09/11/2019
Amazing service and fast shipping. We called looking for the best item to secure our camper to Our pickup. They knew what would work best and we had it the next day.
- HSAB
by: Kim06/10/2021
The product looks great. I had to make 3 holes in the brackets bigger to fit the bolts. But that is minor. etrailer is one of the best companies I've ever dealt with. The delivery was super fast and everyone at etrailer was great!! I asked them alot of questions and they never hesitated answering them.
- HSAB
by: Paul02/24/2021
Great product. Used on my 2001 F350 to hold down my 1959 upgraded, vintage Alaskan camper. Much less expensive, and personally I think better looking than $500 Happy-Jack holddowns. Depends on your need as a large, heavy truck cabover camper might need the expensive frame mounts.
- HSAB
by: Chris B08/25/2020
Have used these on my pickup camper multiple times now. They are not complicated but a little bit tough to install. A ratcheting wrench helps make install easier. Also make sure to position them where you want them in advance because at least with my pickup camper, once you put it on it is tough to reach these to move them. These are a much cheaper option than the frame mount and seem plenty stable for my pop up pickup camper, not sure about a heavier hard sided.
- HSAB
by: Janette09/03/2021
My husband had to use tap and dye set on all of them. He was not happy. Powder coating was not good on them. All the stickers were torn on all of them.
- HSAB
by: Gerry06/28/2020
Excellent product - super fast shipping - perfect fit for my 2019 Ram Turbo diesel 3/4 ton 4x4. Plenty of clearance.
- HSAB
by: Wade02/03/2018
Really impressed with the product and installation was really simple good quality product I would recommend it to anyone
- HSAB
by: H edward05/15/2016
I have a Sunlight, 8 foot, slide-in truck camper that I now carry in a 2015 Dodge 1500 Quad Cab. I use the Brophy angled tie downs for the front of the camper and Happijac bumper tie down for the rear. It took some tweeking and the right combination of hardware to connect the Brophy tie down to the camper but in the end it all came together and I'm very happy with the results. They are relatively easy to install and make a solid, safe tie down system. I would recommend them to a friend.
- HSAB
by: Timothy05/22/2020
Just installed my truck bed mounts. I have a 2002 f350 dully with the 7.3 and 4x4. Easy installation (just about 15 minutes) with no help. Mounts are very heavy duty and well made. USA product. I mounted my lance slide on camper 3,600 pounds. The mounts hold great. I took it for a test run and all was well. I’ll be taking it on the beach this weekend and I have no doubt it will be more then stable. Thank you all for building such a great product and especially making it in our great country. God bless.
- HSAB
Rachael H - 06/28/2018
by: Douglas06/16/2018
It was has been very good So far. We just used it this weekend. I am not sure if this is normal. We traveled 75 miles into a 30 mile head wind causing the camper to slide approximately 1 in backwards Had to lower camper back down reposition camper
Comments
I reached out to my contacts Brophy and the turnbuckles are adjustable so it may be possible for your camper to shift slightly. The stake pocket tie downs should be positioned so that the turnbuckles pull slightly forward. It sounds like you were able to get everything adjusted properly.
-- Rachael H - 06/28/2018
- HSAB
Bob T - 08/30/2014
by: Bob T.08/30/2013
I installed the angled camper hold-downs today and it took me all of fifteen minutes. I was impressed at how heavy-duty they are. I am very pleased with the product.
Comments
Well, its been a year since I installed the hold-downs on my truck and I am still very satisfied with them. They have been in use several times and in fact I am leaving next week on a two week hunting trip to Colorado.
Bob T - 08/30/2014
- HSAB
by: Wayne R09/09/2017
The tiedowns I ordered from etrailer worked out perfectly. They fit great on my 1992 mint condition Ford f250 the 1992 popup mint condition camper I put on it .I would order from etrailer again , and I will whenever I need any parts . Thank You etrailer.com.
- HSAB
Bill - 05/12/2020
by: Bill05/11/2019
Arrived way faster than I had figured! Great service! Haven't used it yet but so far very impressed on service with all orders from etrailer
Comments
Works good but be sure to very securely tighten them up to the underside of your bed rails. Mine shifted and dented my bed rails
Bill - 05/12/2020
- HSAB
by: Tim H09/25/2017
I purchased for a 2011 f150 unsure if would work? I recieved and the box was destroyed but everything was there, I installed last night. Ok first on this bed style it's not a simple install, first the bolts that hold the clamp plate need to be reversed with nuts to inside bed which isn't as easy as it sounds! Reason being the lip is not quite the required 2". I managed to get them on and bolted together,oh I did add a 1" spacer onto the t-bolts to lengthen them otherwise I was out of threads , they are on and very very siolid I haven't loaded camper yet do to having to work, but do not see a problem , sorry no pictures of completed install, I believe the installation took less than hour and a half, Thanks for the great customer service it is refreshing to find these days !!!
- HSAB
by: Joe M09/01/2016
The product has functioned exactly as required. Word of caution, for those with full size trucks and narrow width jacks on the camper, the straight ones may work better than these that are bent at 90 degrees. I bump my jacks when installing/removing the camper, but not bad. Will cause wear on jack sleeves before too long. Thanks!
- HSAB
by: Dave G10/01/2013
The Camper tie downs fit perfectly on my 2012 F 250. Easy installation. Can't use my tonneau cover though, so I have them adjusted to go back on and should only take a few minutes to re install.
- HSAB
by: Jeff09/09/2021
Works Great
34
91
Show More Reviews
Ask the Experts about this Brophy Camper Tie-Downs
- Recommended Camper Tie-Downs For A 2016 GMC 2500HDFor your 2016 GMC Sierra 6-1/2 Foot Bed - Crew Cab - with board or step underneath truck bed and with a factory installed hitch the 2500 Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item # HSAB with the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000lbs - Qty 4 Item # TDHP is your best option. It has a simple clamp on design that requires no drilling. There are some requirements with these tie-downs: external bed rail width cannot...
view full answer... - Will the Brophy Clamp On Camper Tie-Downs HSAB Fit a 2012 Ford F-250Yes, the Brophy Clamp On Camper Tie-Downs part # HSAB will fit a 2012 Ford F-250 so long as you have a SRW model. If you have a DRW model then you won't be able to use a set of bed mounted camper tie-down and will instead need to use frame mounted camper tie downs, the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLF2012 and part # TLF3006 (Short Bed + Factory Hitch). I have attached turn buckles for each of these options. Bed Mounted - Brophy Basic Turnbuckles part # TDHP Frame...
view full answer... - Camper Tie Downs that Fit 2011 GMC Sierra 1500 Extended CabYes the Brophy Camper Tie Downs part # HSAB is a confirmed fit for your 2011 GMC Sierra 1500 Z71 extended cab. If you wanted the best tie downs the Torklift tie downs part # TLC2207 and # TLC3203 are a confirmed fit for your truck and offer the best solution as they attach directly to the truck frame for a very secure and solid mount. Running boards are boards that run under the cab of the truck and a hitch would be the square opening at the rear of the truck that a ball mount would...
view full answer... - Camper Tie-Down Fit For 2021 Toyota Tundra With Step Under Truck BedI checked with TorkLift, and their tie-downs will not fit your 2021 Toyota Tundra since you have a step underneath your truck bed, but depending on a couple measurements, you will still be able to use the Brophy Clamp On Camper Tie-Downs # HSAB. These will work so long as your bed rails are no wider than 5-1/2 inches and you have at least 2 inches of space beneath your bed rail; they are also not compatible if your Tundra has a drop-in bed liner or a plastic bed rail. The other thing...
view full answer... - How to Determine if Brophy Clamp On Camper Tie-Downs Fit 2016 Ram 1500 With 6 foot 4 inch BedThe Brophy Clamp On Camper Tie-Downs # HSAB are not designed as specific fits for a truck, so there is no information regarding their fit on a 2016 Ram 1500 with a 6'4" bed, but I can tell you how to determine it they will. The Brophy tie-downs simply require your Ram's bed rails to be a maximum of 5-1/2" wide with at least 2" of space beneath the bed rail. Also keep in mind the tie-downs will not fit if your Ram has a drop-in bed liner, plastic bed rails, double-walled bed, or side-step...
view full answer...
- Camper Tie Down Recommendation for 2005 Toyota TacomaFor your 2005 Toyota Tacoma, I recommend the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSAB. These tie downs clamp into the bed rail of your truck to provide the attachement point for your camper. It comes with Neoprene pads to protect your truck's paint. I've attached a photo with the dimensions for you to confirm a fit. Another option is to use the Brophy Stake Pocket Mounted Camper Tie Downs - Bed Mount - Black Powder Coated Steel - Qty 4...
view full answer...
- Camper Tie Downs for 2000 Ford Super DutyThere are several different types of tie downs, bed mounted, bumper mounted and frame mounted. For you 2000 Ford Super Duty I recommend frame mounted tie downs, they provide the strongest base for securing your camper. Since the attachment points are on the frame, which is lower than the bed, it distributes the weight better and gives you better handling and a more stable rig. The TorkLift Custom Frame-Mounted Camper Tie-Downs Front # TLF2007 and Rear # TLF3001 are a great example. The...
view full answer...
- Will Brophy Camper Tie-Downs Work With Composite Bed On 2013 Toyota TacomaI was not able to see where these tie-downs are compatible with your Tacoma. One of the notes in the specs says it is not compatible with plastic bed rails, but I may have an option that will work for you. I have atatched a link to our product page that lists the camper tie-downs that are compatible with your truck. Just use the drop-down box and select the style truck you have and you can see if the tie-downs are what you are looking for. Or you can tell me if your truck is a 2WD or...
view full answer... - Can Brophy Camper Tie Downs Be Used with Bed Rail CoversYes, the Brophy camper tie downs like the # HSAB can be used with bed rail covers. If you check out the picture I attached you can see a set installed on a bed rail with plastic covers.
view full answer...
- Are Brophy Tie-Downs Compatible with Newer Super Duty Pickups with Aluminum BedYou can use the Brophy Clamp On Camper Tie-Downs # HSAB for your 2018 Ford F-350 Super Duty but we actually recommend going with the Camper Tie-Downs # HSSF instead as they have a slightly different design that better fits your Super Duty. Attached are dimensional photos of each for you to reference with your application. You will notice that one, part # HSAB, has an extra bend towards the end where you attach your tie-downs.
view full answer...
- Will Clamp On Brophy Camper Tie Downs HSAB Fit 2003 Chevy Silverado 1500As long as the bed of your 2003 Chevy Silverado has access to the under side of the bed rails and a minimum of 2 inches between the lip of the bed rail and the side wall (see photo), the Brophy Camper Tie-Downs, # HSAB, should fit. These are a universal-fit item that were designed to fit as many truck beds as possible. The bed liner shouldn't be an issue since you can cut it away. In addition to the tie-downs, you may be interested in the tie-down hardware kit, # TDHP, which includes...
view full answer...
- Which Brophy Camper Tie Down Fits 2015 Ford F-150 BestThe Camper Tie Downs part # HSAB that you referenced are a universal install tie-down system that would work well on your 2015 Ford F-150. You should still check owners manual of your truck to see if there are any restrictions on using truck bed mounted camper tie downs. I checked with Brophy and they recommend using the # HSSF, which will work with your truck as long as there is two inches of clearance under the lip of the bedside, as shown in the provided diagram. For a hardware...
view full answer...
- Recommended Camper Tie-Downs for Use in 2008 Ford F-250 with 8-Foot BedYour best choice in a camper tie down will depend on how your F-250 long bed is equipped. On the linked page you can use the drop-down menu at the top of the page to select how your truck is equipped, specifically whether it has a board or step underneath the bed and the type of hitch that is installed. For example, if you have a factory hitch with an open cross tube and no board or step underneath truck bed Torklift offers their # TLF2011-TLF3004. The linked video shows installation. The...
view full answer... - Will Brophy Camper Tie-Downs # HSAB Fit a 1995 Toyota T100Brophy camper tie-downs # HSAB are designed for full-size trucks but could fit your 1995 Toyota T100 if: External bed rail width does not exceed 5-1/2" There is at least 2" of space beneath lip of bed rail Truck does not have a drop-in bed liner, plastic bed rail, double-walled bed, or step-side bed With these I recommend using Brophy Basic Turnbuckles # TDHP.
view full answer... - Dimensions for Brophy Tie Down Kit part # HSAB and Fit for 2014 Ram 2500I attached a picture that has basically all of the dimensions you'd ever want for the Brophy Tie Down Kit part # HSAB. These will fit your 2014 Ram 2500. If you check out the install video I attached you'll see the kit installed on a similar full-size Ram as yours as well.
view full answer...
- Recommended Camper Tie Down For North Star 600ss On 2017 Toyota TacomaI reached out to Torklift and they have never had a fit for a Toyota Tacoma because their hitches are for capacities greater than that size truck can handle. This means that the camper tie downs compatible with their hitch will not work for you due to the lack of a hitch compatible with your vehicle. For your 2017 Toyota Tacoma, I recommend the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSAB. These tie downs clamp into the bed rail of your...
view full answer...
- Will Brophy Camper Tie Downs Fit a 2004 Dodge Ram 3500 DuallyThere are some exclusions for the Brophy camper tie downs # HSAB: Some dually trucks and most mid-size or import pickup trucks Pickups with drop-in bed liners, plastic bed rails, side-step beds, and double-wall beds 2003 Dodge 3/4-ton and 1/2-ton 1500 extra cab 4-door 2WD short box 2002 Dodge 1500 4-door short box 2002 Dodge 1500 quad cab 2004-2008 Ford F-150 But the list does not exclude your 2004 Dodge Ram 3500 dually. If the dually bed is not completely metal or if the walls...
view full answer... - Install Instructions for Brophy Tie Downs # HSAB Installed in 2001 Ford F-150I attached a picture that shows the instructions we have for the Tie Downs part # HSAB that you referenced. We've haven't seen them be an issue on a 2001 Ford F-150, but if you could get me a picture of what your setup looks like I can see if there's something I can see that's not right.
view full answer...
- Tie Down Anchor Recommendation for 2010 Toyota TundraThe Brophy Camper Tie Downs part # HSAB are a universal fit tie down that would fit your 2010 Toyota Tundra as long as the bed liner you have isn't a drop in style. If it's a spray in style then you'd be fine. If you have a drop in style you'd have to trim it back to install these which you probably wouldn't want to do. The correct hardware kit you'd need is the # TDHP.
view full answer... - Brophy camper Tie Downs Recommendation for a 2003 Chevy Silverado 2500HDThe Angled Hold-Downs for Truck Bed Campers # HSAB should work very well for your 2003 Chevy Silverado 2500. We had a customer leave us a review that said they were very easy to install and reinstall and that it only took a few minutes, so I think they would work well for you since you said you needed the easiest to install and remove. The # TDHP tie down hardware will also be needed to attach the camper to the tie down bracket.
view full answer... - What is the Difference Between Brophy Truck Camper Tie-DownsYes, the # HSAB is angled at the ends making it easier to attach the turnbuckles and keeping the tie-downs further from the truck's fenders. The # HSSF will work just as well but isn't quite as easy to connect.
view full answer... - Brophy Clamp On Camper Tie-Downs Replacement T-BoltWe do have a replacement T-bolt available for the Brophy Camper Tie-Downs part # HSAB, part # HSBP, part # HSCP, part # HSSF or part # HSWB. The replacement T-Bolts are part # BR2007 and only come in a pack of four. I have attached an installation video of HSAB for your reference.
view full answer... - Camper Tie Downs for a 2002 Ford F-250 and Arctic Fox CamperThe Brophy tie downs # HSAB should only be mounted to make contact with the metal of the bed so I would not recommend them for your 2002 Ford F-250 unless you can remove those caps. Since you are trading in the camper for perhaps another camper the best solution is to use custom fit frame mounted camper tie downs. There are a few options depending on how your truck is configured. I have linked the main page for your truck. For example if you have an 8 foot bed without any board or step...
view full answer... - Will Brophy Camper Tie Downs HSAB Fit 2003 Toyota TacomaI reached out to my contact at Brophy and they haven't tested their clamps on any imported trucks. They said that their Brophy Clamp On Camper Tie-Downs - Bed Mount - Zinc Plated Steel - Qty 4, # HSAB should work as long as you have less than 5 inch wide walls and more than 2 inches of space beneath the lip of bed rail. Obviously it does require your truck bed has the lip. You will also want to note that it will work with most spray-on bed liners, but it would require cutting around...
view full answer... - Brophy Clamp On Camper Tie-Down Placement The Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item # HSAB mount to the bed rail instead so you won't have any space issues with the running boards of your truck.
view full answer... - Fit of CR Brophy Truck Bed Camper Tie Downs # HSAB on 1998 Ford F150According to CR Brophy, the # HSAB truck bed camper tie-downs should fit your 1998 F150 just fine, as long as it has a standard (not step side) bed it doesn't have a drop-in bed liner, or plastic bed rails. I'd also recommend the tie down hardware, part # TDHP.
view full answer...
Do you have a question about this Camper Tie-Down?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality camper tie-downs for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate camper tie-down information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Edited by:
Leah B
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Rachelle B
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R
Updated by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-1624
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.