1. Camper Tie-Downs
  2. TorkLift
  3. Rear Tie-Downs
  4. Frame-Mounted
  5. Powder Coated Steel
  6. Standard Disconnect
TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear
Torklift- 10% Off Select Torklift Products 11/24 to 12/3/21

TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear

Item # TLC3206
lowest price pledge
Retail:$407.49
Our Price: $310.49
You Save: $97.00
Camper Tie-Downs
This item qualifies for Free Shipping
Shipping Weight: 33 lbs
Quantity: 
In Stock
Instant Rebate
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Ready your truck to haul a camper with these sturdy tie-downs. Inserts slide into frame-mounted brackets for use and easily remove for a clean, unobtrusive look. Custom designed for your vehicle. Call 800-298-1624 to order TorkLift camper tie-downs part number TLC3206 or order online at etrailer.com. Free expert support on all TorkLift products. Guaranteed Lowest Price and Fastest Shipping for TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear. Camper Tie-Downs reviews from real customers.
  • All Info
  • Reviews (762)
  • Q & A (15)
  • Videos (2)
  • Photos
  • Why etrailer?

TorkLift Camper Tie-Downs - TLC3206

  • Rear Tie-Downs
  • Frame-Mounted
  • TorkLift
  • Powder Coated Steel
  • Standard Disconnect

Ready your truck to haul a camper with these sturdy tie-downs. Inserts slide into frame-mounted brackets for use and easily remove for a clean, unobtrusive look. Custom designed for your vehicle.


Features:

  • Tie-downs provide attachment points at the rear of your truck bed for securing a bed-mounted camper
    • Front tie-downs sold separately
  • Frame-mounted design ensures excellent handling
    • Securing camper to truck's base instead of its bed better distributes weight to keep setup from being too top-heavy
  • Virtually undetectable when they're not in use
    • Tie-down inserts can be easily removed from frame-mounted receiver brackets with included pins
  • Custom fit for your vehicle
    • Brackets fit tight to truck frame - no loss of ground clearance
  • Powder coated steel construction
  • 2 Rear tie-down inserts, frame brackets, and necessary hardware included
  • Made in the USA
  • Lifetime warranty


C3206 Tork Lift Tie Down - Rear Frame Mount

Replaces 39120



This Product Fits The Following Vehicles

  • 2001 - 2006 GMC Sierra 2500 HD and 3500 - 8 Foot Bed - with board or step underneath truck bed and with a factory installed hitch
  • 2007 - 2007 GMC Sierra Classic 2500 HD and 3500 - 8 Foot Bed - with board or step underneath truck bed and with a factory installed hitch
  • 2001 - 2006 Chevrolet Silverado 2500 HD and 3500 - 8 Foot Bed - with board or step underneath truck bed and with a factory installed hitch
  • 2007 - 2007 Chevrolet Silverado Classic 2500 HD and 3500 - 8 Foot Bed - with board or step underneath truck bed and with a factory installed hitch
  • 2001 - 2006 GMC Sierra 2500 HD and 3500 - 8 Foot Bed - with board or step underneath truck bed and without a hitch
  • 2007 - 2007 GMC Sierra Classic 2500 HD and 3500 - 8 Foot Bed - with board or step underneath truck bed and without a hitch
  • 2001 - 2006 Chevrolet Silverado 2500 HD and 3500 - 8 Foot Bed - with board or step underneath truck bed and without a hitch
  • 2007 - 2007 Chevrolet Silverado Classic 2500 HD and 3500 - 8 Foot Bed - with board or step underneath truck bed and without a hitch
  • 2001 - 2006 GMC Sierra 2500 HD and 3500 - 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
  • 2007 - 2007 GMC Sierra Classic 2500 HD and 3500 - 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
  • 2001 - 2006 Chevrolet Silverado 2500 HD and 3500 - 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
  • 2007 - 2007 Chevrolet Silverado Classic 2500 HD and 3500 - 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
  • 2001 - 2006 GMC Sierra 2500 HD and 3500 - 8 Foot Bed - without board or step underneath truck bed and without a hitch
  • 2007 - 2007 GMC Sierra Classic 2500 HD and 3500 - 8 Foot Bed - without board or step underneath truck bed and without a hitch
  • 2001 - 2006 Chevrolet Silverado 2500 HD and 3500 - 8 Foot Bed - without board or step underneath truck bed and without a hitch
  • 2007 - 2007 Chevrolet Silverado Classic 2500 HD and 3500 - 8 Foot Bed - without board or step underneath truck bed and without a hitch



Video of TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for TorkLift Rear Frame-Mounted Camper Tie-Downs Review

Speaker 1: Today, we're going to be taking a look at TorkLift's line of Custom Frame-Mounted Camper Tie-Downs. This is for the rear.You'll want to check etrailer.com's fit guide to verify which ones are going to work with your vehicle.They're also available for the front. So, you can get a matching set custom made for your application. These custom mounted brackets are going to provide an easy attachment point to hook up your camper.What's additionally great about those is that they have the removable ends, so when you're not using it, they'll be hidden away and your vehicle will look like factory.The custom mounted brackets we're engineered to provide you with the best location for your tie-down point, to evenly distribute the load. So once they're attached and adjusted, this'll keep your camper from being too top heavy. This will increase the overall ride quality while your camper's attached and the safety.The attachment points are removable and adjustable.

There'll be two loops here where you can make your connection to your camper and there's two holes here to adjust the length of how far your attachment point sticks out.You can use either hole. So if you have very wide camper, you can use that first hole, or if your camper is tucked in nicer, you can use the second hole. The included pin will slide through the hole and keep it in place.It's made of a durable powder coated steel, so it's going to be extra strong and rigid, to keep your camper tied down nice and snug and the powder coat is going to prevent any rust and corrosion from occurring.When you're ready to hook up to your new connection point, take your turnbuckles and attach them to your camper. Now, if you need some turnbuckles, you can pick some up here on our website. You'll hook it in to your camper and you'll also hook it in down here on your new attachment point.Then, depending on your style of turnbuckle, you'll want to tighten it down.

Ours is a twist adjustment type. There are many different styles.And now with both sides in place, we'll repeat that same process in the front.Compared to Stake Pocket, or bumper-mounted camper tie-downs, frame-mounted tie-downs will provide better handling. They also mount out of sight, so they will be undetectable when not in use, giving your truck a cleaner look.Because the custom fit brackets secure tight against your trucks frame, there is no loss of ground clearance; and that completes our look at TorkLift's line of Custom Frame-Mounted Camper Tie-Downs for the rear.


Customer Reviews

TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear - TLC3206

Average Customer Rating:  4.8 out of 5 stars   (759 Customer Reviews)

Ready your truck to haul a camper with these sturdy tie-downs. Inserts slide into frame-mounted brackets for use and easily remove for a clean, unobtrusive look. Custom designed for your vehicle.

- TLC3206
by:

Installed front hitch in front and rear tie-downs. Solid as a rock and easy to install



- TLC3206
by:

I order this product for my 2003 Chevrolet Silverado. The quality is as advertised. I did the install myself. The bumper supports on my vehicles bumper are an integrated part of the tie down and not as easy to deal with as I had hoped. But the end result is very solid. Took me about two hours to go the install. Very happy with the quality of the Totklift tie downs.



- TLC3206
by:

Great product. Was easy to install. It has Worked great. The camper came with fast gun tie down system. I would recommend using these also



- TLC3206
by:

I just received this and it looks solid and well built. I tested it to ensure it will fit my Silverado 2500HD. One thing that I noticed is that Torklift's instructions are terrible. I've never seen such poor instructions and bad photos. You might as well throw them in the garbage and figure it out yourself.



- TLC3206
by:

These tie-down supports are sturdy. Istallation was a bit of a challenge and required holes to be drilled to bolt the upper and lower pieces together, because where they matched up there wasn't a hole. I'm not sure if this was missed or done intentionally to allow for proper alignment first. These were advertised as "no drilling required" but that was not the case. Luckly I am somewhat mechanically inclined. If not, I advise a professional does the install.



- TLC3206
by:

were definitely difficult to install, recommend getting a shop to do it. but afterwards worked great! very adjustable and sturdy.



- TLC3206
by:

Yes! Thank you, thank you, so much!!! You guys have been awesome to deal with and will recommend and also use in the future! Thank you again!



- TLC3206
by:



- TLC3206
by:



- TLC3206
by:



- TLC3206
by:



- TLC3206
by:



- TLC3215
by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


I bought this when my previous belly bar and rear tie-down bent badly when our truck slid off the road into a steep ditch and our camper nearly tipped sideways off our truck. This product is a bit better then my old set up, but I expected something much better for this very high price. It wasn't too tough to install, despite the poorly written instructions. Also, the kit did not include a bolt fisher for the 7/16 bolt. The bolt fisher supplied was for a 1/2 inch bolt. Fortunately I had the correct bolt fisher from a previous project. I am also disappointed that the tie down hole has a slot cut in it which seems would significantly weaken it. I am not optimistic that the tie-down point will not bend or break if we have a similar significant side load such as when we slid into the ditch. I will probably weld the slot in the tie-down point shut to strengthen it.


Comments
They are starting to rust significantly. That is very disappoint considering the very high cost of these. It is interesting that they dont allow pictures of the product for this update.
Floyd D - 11/11/2021


- TLD3109
by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


Easy install, very effective way to keep the camper were it's supposed to be. Just bought a new truck and ordered another set for it. As long as I have a bed mounted camper I will be using this tie down system.



- TLD3112
by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


My brother installed these and he used air tools. The brackets fit perfectly. The instructions were thorough. They bolted right in and the only delay was the disconnect/reconnect of the e-brake cable to install the driver's side bracket (2019 RAM 3500). After all the parts were laid out, he installed all 4 brackets in an hour. He commented many times on the weight, high quality and PERFECT FIT of these brackets. These are worth the price and made in the USA.



- TLD3107
by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


Steve Z at etrailer was sharp and very knowledgeable on the companies product. Steve was able to work with me on getting the proper camper tie downs for my 2015 Dodge Ram 1500 (Item #TLD3107). He told me when they would be arriving and they actually arrived earlier than expected. Great product, install was pretty easy, I had them installed within an hour. This is a very high quality product with heavy duty construction. They provide a secure attachment for tie downs to the truck camper. The instructions provided are adequate, but not great. I Don't normally give recommendations or endorse products, but these I am truly impressed with. Thank you so much Steve and etrailer.



- TLD3109
by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


Seem like a solid well built product. A bit of a pain to install and the instructions could have been more clear and the manual put together better but overall satisfied.



- TLD3109
by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


It fits just beautiful and works great for my pickup camper.



- TLC3215
by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


Well if I get the right part customer service on the phone was great the front bolted right on and also air bags



- TLD3112
by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


Unable to install, all hardware lost in shipping, contacted Etrailer and they said they would send me replacement hardware, that was three or four days ago. I have not received any updates about the new parts or if thay have been shopped.


Comments
Thank you for letting us know. Our customer service team should be reaching out to you in the near future.
-- Etrailer Expert Brooke M - 10/07/2021


- TLF3008A
by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


Thanks for asking Kimberly, I don’t care for them and wish I had bought FastGuns instead. While more money they click in adjusted and ready to go. Each use of the Spring Load XL’s is an ordeal and I’m never really sure they are adjusted correctly. Hope this helps, John



- TLD3107
by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


Ram 1500 install, make sure to remove any burrs inside round end before inserting the crimped end of the receiver. One side was really tight and I couldn’t get it back out to remove the burrs. Used a steel clamp to get it to go in far enough. No fun.



- TLR3503
by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


I ordered the TorkLift Rear frame mount tie downs for our Ford f 350 so we could secure our Lance truck camper to our truck, E-Trailer was great my tie downs arrived two days earlier then expected so I opened the box and checked everything over just to make sure everything was in great shape and everything was so I decided to put them on and it only took me five to ten minutes for both .These tie downs make it very easy to secure our Lance truck camper to our truck and also make it very safe to travel on the highways and back roads



- TLF3008
by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


I would recommend these to anyone tying down a camper on a pickup. Bolts directly to frame and makes load ride so much better than other types of tie downs. Takes a little video time to get the mounting down but it’s included on their website and after completing one the others are easier. Very happy with purchase



- TLF3008
by:

Review from a similar Frame-Mounted Rear in Camper Tie-Downs


Installed on 2020 F250 Superduty. Easy to install rear tie downs only took about 45 minutes. I love the fact there is no drilling or moving existing things. Just straight bolt on and seem to be rock solid.


42
807
Show More Reviews

Ask the Experts about this TorkLift Camper Tie-Downs

Do you have a question about this Camper Tie-Down?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality camper tie-downs for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper tie-down information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee David F
Installed by:
David F
Employee Dustin K
Video Edited:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.