TorkLift Camper Tie-Downs - Custom Frame Mount - Front
(1511 reviews)
Price: $422.97
In Stock
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Item # TLD2121
Our Price: $422.97
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (1511)
- Q & A (0)
- Photos
TorkLift Camper Tie-Downs - TLD2121
- Front Tie-Downs
- TorkLift
- Frame-Mounted
- Custom Fit
- Powder Coated Steel
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Pairs with rear tie-downs (sold separately)
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing camper's weight evenly and lowering its center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Uses pre-existing holes in the frame - little to no drilling required
- Includes 2 front tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
D2121 Tork Lift Truck Camper Tie Down - Front Frame Mount - Custom Fit
Replaces D2113
This Product Fits The Following Vehicles
- 2010 - 2012 Ram 1500 6-1/2 Foot Bed and 4WD - Quad Cab - without board or step underneath truck bed and with a factory installed hitch
- 2010 - 2012 Ram 1500 6-1/2 Foot Bed and 4WD - Quad Cab - without board or step underneath truck bed and with a non-Torklift aftermarket hitch
- 2010 - 2012 Ram 1500 6-1/2 Foot Bed and 4WD - Quad Cab - without board or step underneath truck bed and with a Torklift SuperHitch Hero
- 2010 - 2012 Ram 1500 6-1/2 Foot Bed and 4WD - Quad Cab - without board or step underneath truck bed and without a hitch
- 2013 - 2018 Ram 1500 6-1/2 Foot Bed without board or step underneath truck bed and with a factory installed hitch
- 2013 - 2018 Ram 1500 6-1/2 Foot Bed without board or step underneath truck bed and with a non-Torklift aftermarket hitch
- 2013 - 2018 Ram 1500 6-1/2 Foot Bed without board or step underneath truck bed and with a Torklift SuperHitch Hero
- 2013 - 2018 Ram 1500 6-1/2 Foot Bed without board or step underneath truck bed and without a hitch
- 2019 - 2023 Ram 1500 Classic 6-1/2 Foot Bed without board or step underneath truck bed and with a factory installed hitch
- 2019 - 2023 Ram 1500 Classic 6-1/2 Foot Bed without board or step underneath truck bed and with a non-Torklift aftermarket hitch
- 2019 - 2023 Ram 1500 Classic 6-1/2 Foot Bed without board or step underneath truck bed and with a Torklift SuperHitch Hero
- 2019 - 2023 Ram 1500 Classic 6-1/2 Foot Bed without board or step underneath truck bed and without a hitch
- 2009 - 2012 Dodge Ram Pickup 1500 - 6-1/2 Foot Bed and 4WD - Quad Cab - without board or step underneath truck bed and with a factory installed hitch
- 2009 - 2012 Dodge Ram Pickup 1500 - 6-1/2 Foot Bed and 4WD - Quad Cab - without board or step underneath truck bed and with a non-Torklift aftermarket hitch
- 2009 - 2012 Dodge Ram Pickup 1500 - 6-1/2 Foot Bed and 4WD - Quad Cab - without board or step underneath truck bed and with a Torklift SuperHitch Hero
- 2009 - 2012 Dodge Ram Pickup 1500 - 6-1/2 Foot Bed and 4WD - Quad Cab - without board or step underneath truck bed and without a hitch
- 2013 - 2014 Dodge Ram Pickup 1500 - 6-1/2 Foot Bed without board or step underneath truck bed and with a factory installed hitch
- 2013 - 2014 Dodge Ram Pickup 1500 - 6-1/2 Foot Bed without board or step underneath truck bed and with a non-Torklift aftermarket hitch
- 2013 - 2014 Dodge Ram Pickup 1500 - 6-1/2 Foot Bed without board or step underneath truck bed and with a Torklift SuperHitch Hero
- 2013 - 2014 Dodge Ram Pickup 1500 - 6-1/2 Foot Bed without board or step underneath truck bed and without a hitch
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- etrailer mistake
Customer Reviews
TorkLift Camper Tie-Downs - Custom Frame Mount - Front - TLD2121
Average Customer Rating: 4.7 out of 5 stars (1511 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.by: Angel O12/20/2020
2015 Dodge Ram Pickup
Steve Z at etrailer was sharp and very knowledgeable on the companies product. Steve was able to work with me on getting the proper camper tie downs for my 2015 Dodge Ram 1500 (Item #TLD2121). He told me when they would be arriving and they actually arrived earlier than expected. Great product, install was pretty easy, I had them installed within an hour. This is a very high quality product with heavy duty construction. They provide a secure attachment for tie downs to the truck camper. The instructions provided are adequate, but not great. I Don't normally give recommendations or endorse products, but these I am truly impressed with. Thank you so much Steve and etrailer.
by: Bruce04/13/2021
Make sure the long upright is on the proper side of the bed mount.
by: Roger A.05/05/2016
2014 Ram 1500
Torklift Tie-Downs are the best. ETRAILER Got them to me fast and easy to install. Thinking about buying the rear this year
by: Jesse 04/29/2021
I gave it a 4 star because it was hard to figure out which one would work for my truck. The gage of the metal is great. No bending and I have been using them for a year now.
by: Steve11/02/2018
The tie downs fit perfectly on the truck frame on the holes that are already punched out from the factory. All of the parts were with the order and it was an easy installation.
by: Bob07/04/2015
Ordered tie-downs for my truck and in a few days had them!!! No hassle. Prompt service!
by: Jay 12/16/2020
Super helpful ordering, got here super fast even during Christmas rush. Will be installing tomorrow and hopefully it will go as smoothly. Great to work with pros. Jay
by: Tyler 09/13/2020
Fits truck perfectly and a well made pr oduct
by: Roger 08/09/2023
by: James 08/01/2021
by: Dot07/15/2022
I had the mountings professionally attached to the frame. The hatches can be easily removed when not in use( and I would recommend that to keep them from being stolen). Using chains and turnbuckles, I feel very comfortable with my truck camper staying where it is.. does not rock, very solid.
It’s nice to feel secure about my camper staying firmly attached.
It was worth the investment.
by: Francisco11/19/2023
I like to thank Lori with etrailer and guiding me through the process of getting , Front and rear,
Torklift Camper Tie-downs -Custom Frame Mounts. Well doing research this was the best way to go for tying down and stabilizing a camper. Torklift camper tie-downs are solid well built!
I had ordered Mounts on Monday and received them on Friday . I Had the tie-downs on my , 2019 Chevy Silverado 2500 by Saturday. The whole process was awesome , real easy installation. Great help with videos and instructions on mounting tie-downs on my truck provided by etrailer. I’m going to use them on my pop-up Hallmark Camper. Thank you for all your help etrailer.
by: Reed04/11/2023
The units appeared to be well made and were nicely painted. I installed them on my F150. The tools and hardware supplied were of good quality and installation was straight forward. Two people would have been great, but I was able to install both sides in a little less than an hour. The holes all line up very well. I like these better than the previous units I had on my 2013, as they do not stick out as far - so less noticeable. The extension arms come out at a very nice angle just under the body. I find these units with quality I expected and I think they will be highly functional in attaching my camper.
by: Cole08/08/2023
Great product but drivers side hole F on directions is none existent on the 2023 f250. Not sure if it’s safe to use being that the passenger side has the same issue but they supply an extra bracket that utilizes another factory hole so it’s got more support. Needs to be updated for 2023 models.
by: John09/25/2022
Significantly overpriced for what it is and on top of that it’s terrible quality!
They were installed on the truck for 2 weeks, and used once when they’ve already started to rust. Even if they were made of stainless steel it’s overpriced for what you get.
When I contacted etrailer about a warranty they directed me to TorkLift. At first they were just going to send me a can of paint to address the rust issue. After I threatened to leave a poor, but realistic review they sent me a replacement set.
I’d say to wholeheartedly avoid this product but the problem is there aren’t other options…. And they know it…. Which allows charge whatever they want.
by: James 09/04/2022
Great product, installation took about 2 hours. Videos were helpful in explaining the sequence of install
by: Justin U04/19/2023
Easy install and just a great product. Install took 90 minutes for front and rear mounts.
by: Kert08/07/2022
The rear Torklift camper tie down instructions and install were straight forward and an easy install. However, the front Torklift camper tie down instructions and install was difficult. The instructions were not clear and the photos of the install included on the instructions were very poor quality. Additionally, the instructions said to torque the bolts but there was not sufficient room to get a torque ratchet on the bolt. In fact it was very difficult to even get two of the nuts on the bolt. Look at the attached photo and you will see that there is no way to get a torque ratchet on this nut. If you order this product expect it to be tough to install and difficult to mount it according to the specifications.
by: Dustin04/26/2022
Perfect fit. Very strong and secure. The leaf spring bolt on my 2017 F350 could only be loosened by a local diesel mechanic. The Ford dealership and corporate repair shops wouldn’t loosen it for me due to their liability concerns. The bolts that you need to feed through with the wire leads are a bit tricky. Be sure you have something like vise grips to clam onto the bolt once it is in place before you remove the wire. You don’t want it to drop back down into the frame. You also need to hold onto the end of the bolt while you hand tighten the nut until the star washer can bite enough to keep it from spinning. Then you can crank it down with your ratchet. All in all, the instructions were very good and complete. I was able to do the installation myself with just the one trip to get the passenger side leaf spring bolt started. I look forward to many years of camping with my unit securely tied down to my truck. Thanks!
by: Kevin07/09/2022
The torklift tie down system is a must. I’ve had them on my GMC Denali the make loading and securing my lance camper a breeze. I just ordered a new set because I recently purchased a new ram truck and the old bracket wouldn’t fit. Not sure how it could be done with out your products.
by: Charles F05/23/2020
Jason was great to work with on getting the proper camper tie downs for my truck as it was a new truck and was a bit confused as to the proper application.
I had them installed within an hour. Even an armature bolt twister could do this!
I have used my camper a lot since putting these on my truck and will tell you these are THE MOST SECURE ANCHORS I have ever used on any of my trucks PERIOD!
You will not make a bad decision going with this product. I recommend these tie downs over any product available! I Don't normally give recommendations or endorse products. These I am truly impressed with.
by: Tim Schultz10/27/2023
Product did not fit correctly need modifications spoke with TorkLift. They are looking into the problem. Very disappointing would not buy again.
by: Robert08/22/2022
Definitely love these tie downs. I can convert my truck into a camper in less than five minutes and they securely hold the slide-in no matter the road conditions or terrain we are crossing.
by: Jim03/29/2023
We previously bought a truck camper and older truck with tie downs. A year ago we decided to upgrade to a new truck which of course meant buying and installing new TorkLift tiedowns. After some hand wringing I made the appropriate purchase and took the next step of installing them. I did feel reassured that the product was set up for our specific truck. Although I do some work on the camper and all I am not a mechanic so I will say this product was a cinch to install.
25
1509
Show More Reviews
See what our Experts say about this TorkLift Camper Tie-Downs
- Torklift Camper Tie-Downs for 2013 Ram 1500 Quad Cab with OEM HitchAccording to Torklift, the # TLD2121 you mentioned is a fit for 2013 Ram 1500 Quad Cab, 4x4, 6-1/2 foot bed without running boards that extend past the rear of the cab. It is a fit for models with the OEM hitch. It will not fit Laramie models. These are the front tie downs only. For both the front and rear tie downs, you would order TLD2121-TLD3107. If your truck is equipped differently than mentioned above, let me know and I can make some other recommendations.
view full answer... - TorkLift Truck Camper Tie-Down QuestionThe items you list, the TorkLift Custom Frame-Mounted Camper Tie-Downs, # TLD2121 and # TLD3107, are a confirmed fit for the 2012 Ram 1500 with 6-1/2 Foot Bed, 4WD, Quad Cab - without board or step underneath truck bed and with a factory installed hitch, non-Torklift aftermarket hitch, or with a Torklift SuperHitch Hero. Please look for markings on your installed hitch to identify manufacturer.
view full answer... - Where do TorkLift Custom Frame-Mounted Camper Tie-Downs TLD2121 Install on 2016 Ram 1500The install instructions I attached for the # TLD2121 show where you will attach them to your truck frame. I also attached a picture I took from the instructions that will show them as well.
view full answer...
- Load Rating of TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD2121The TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD2121 do not carry a specific weight rating since they are capable of securing any slide-in truck camper that your Dodge or Ram truck can handle. This kit includes two front tie-down inserts, frame brackets and installation hardware. For rear tie downs you will order # TLD3107.
view full answer... - Torklift Tie Downs that Fit 2019 Dodge Ram 1500 Classic Bighorn with Factory Hitch Yes, the front Torklift tie down part # TLD2121 is a confirmed fit for your 2019 Ram 1500 Classic with the factory hitch and not running boards or steps. For the matching rear you'd want the part # TLD3107.
view full answer... - Recommended Camper Tie-Downs For 2011 Dodge Ram 1500 4WD Quad Cab With Ram BoxFor your 2011 Dodge Ram 1500 Longhorn Laramie Quad Cab 6-1/2" bed with the Ram Box and with no under bed running boards or steps or trailer hitch you will need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLD2121 and Rear # TLD3107. These are a custom fit for your specific truck and will give you the locations needed to secure your truck bed camper. If you do not already have turn buckles I recommend going with two sets of the TorkLift Basic SpringLoad Turnbuckles for...
view full answer... - Which Front Set of Torklift Tie Downs Fits 2016 Ram 1500 6-1/2 ft BedIf your 2016 Dodge 1500 Big Horn Extended Cab 4x4 doesn't have a set of running boards the correct front set of Torklift tie downs is the part # TLD2121. At this time Torklift does not have a front set that fits with boards. The rear set you'd need is the part # TLD3107.
view full answer... - Availability of TorkLift Camper Tie-Downs for 2014 Dodge Ram 1500 LaramieThe Laramie trim level on your Ram 1500 does not affect the fit of TorkLift camper tie downs, but other equipment can affect what will work on your truck. The link provided will take you to our main page for camper tie-downs for the 2014 Ram 1500. You will just need to select your particular version of the 1500 from the drop-down menu at the top of the page (Select Vehicle Style). It is necessary that your Ram 1500 Laramie be a 4WD truck and NOT have running boards that extend past the...
view full answer... - Camper Tie Down Recommendation for a 2014 Ram 1500 with Running BoardsTorklift does not have a custom fit tie down for the front of your vehicle because of the running boards. Tie downs # HSSF are an option. I have included a link to the installation instructions plus a review video so you can determine if they would be compatible with your truck since there is no fit guide for these tie downs. You will also need the # TDHP.
view full answer... - Recommended Truck Bed Camper Tie Downs For 2014 Ram 1500 Short Bed Quad CabI have the tie-downs you need for your 2014 Ram 1500 short bed. I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLD2121 and the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLD3107. You will also need the turnbuckles, and I recommend the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Black - Qty 4 # TLS9529-2-LK which are a confirmed fit for your truck.
view full answer... - Recommended Torklift Tie Downs For A 2019 Ram 1500 Classic Quad Cab With A 6.5" BedWe can definitely set you up with front and rear tie downs. For your 2019 Ram 1500 classic quad cab with the 6.2' bed I recommend the # TLD2121 for the front and the # TLD3107 for the rear. These will fit nicely provided you have a factory installed trailer hitch with an open ended crosstube, and you do not have any kind of steps or running boards under the bed. This will all be no drill installation. We also can provide turnbuckles if you are in need. For that I recommend the Torklift...
view full answer... - Comparing Installations Of Camper Tie-Downs For a 2013 Ram 1500 With 6-1/2' Bed First of all the board or step underneath truck bed is referring to nerf bar or step that extends past the cab of your 2013 Ram 1500 to where it can also be used for accessing items in your bed. These will look like the Westin R5 Modular Nerf Bars # 28-534310. There are really 3 different types of tie down anchors used for anchoring a slide in truck camper. Really a good, better, best comparison. The Brophy Clamp On Camper Tie-Downs # HSSF are the good anchors. These anchors are the...
view full answer...
Do you have a question about this Camper Tie-Down?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Lindsey S
Installed by:
Jeff D
Installed by:
David F
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Isabelle B
Updated by:
Amanda K
Video Edited:
Dustin K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.