Ready your truck to haul a camper with these sturdy tie-downs. Inserts slide into frame-mounted brackets for use and easily remove for a clean, unobtrusive look. Custom designed for your vehicle.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com, and today we're gonna take a look at TorkLift custom frame-mounted rear camper tie-downs. These tie-downs provide attachment points at the rear of your truck bed for securing a bed-mounted camper. These are custom fit tie-downs and they are designed to fit the 2019 and newer Ram 2500 with either a 6 1/2 foot bed or an 8 foot bed crew cab with board or step extending under bed and with a factory-installed hitch, or with board or step underneath cab and with a factory-installed hitch or without board or step and with a factory-installed hitch. So on a custom fit part like these tie-downs, I do recommend using the fit guide on our website and enter the year, make and model of your vehicle. And our fit guide will let you know if these tie-downs will work for your vehicle. The frame-mounted design ensures excellent handling because securing your camper to your truck's base, instead of its bed, better distributes weight to keep your setup from being too top heavy.
These brackets fit tight to the truck frame, so there will be no loss of ground clearance. And these are steel construction with a black powder coat to resist rust and corrosion and these inserts can be easily removed. They do come with these bail pins so they're very easy to detach and remove. And so once you remove these inserts, let me bring this back into frame here, your tie-downs are going to be virtually undetectable when they are not in use. These inserts do have two different holes that the pins go through, so if your camper is a little bit wider you would use this first hole on the insert to have that tie-down point stick out a little bit farther, and if your camper is a little bit narrower, you can move it into this hole and then secure it with the bail pins as I will do here.
And I'm gonna bring that in all the way so it'll fit on my table and then I'm going to come alongside here, make sure I've got the holes lined up. And again, it's very easy to secure that pin. So this is going to give you a secure connection point for your turnbuckles. Now you are going to get two rear tie-down inserts, frame brackets, and the necessary hardware that you see here, with the instructions. And you also get two stickers to put on the ends of those inserts.
These are made in the USA and they do have a limited lifetime warranty. Well, that's gonna conclude our look today at these camper tie-downs. I do hope that they we're helpful for, I do hope this was helpful for you. Again, my name is Andy. Thank you for joining me..
Average Customer Rating: 4.9 out of 5 stars (21 Customer Reviews)
Ready your truck to haul a camper with these sturdy tie-downs. Inserts slide into frame-mounted brackets for use and easily remove for a clean, unobtrusive look. Custom designed for your vehicle.This frame mounted camper tiedown was well made and as advertised required no welding. As I recall there were errors in the torquing requirements some of which were beyond what I could do by hand even with an extension on the wrench. The big advantage of this system is that you can take off the extension that actually connects to the tie down, so nothing is sticking out from the truck when the camper is off.
Easy installation and a very solid mount. Finish looks to be holding up well. Had HappiJac on my last truck, and that worked fine, but this is superior in most respects and requires no drilling.
This has got to be one of the most straight forward installs I have ever done . Rears only took 20 minutes to install, and the fronts 40 minutes due to the emergency break cable. If you stop and read the instructions, they provide a clear picture on how to complete the setup. Very stout and worth it.
Easy installation. Works great.
Excellent product!
These are great! I have the rear step so I modified the left side solid as a rock! Still have my step.
Good tie downs, functioning well with no problems.
Our order arrived 2 weeks before we expected, just in time for our first trip with our truck camper. The installation was smooth and everything feels great!
Very clear install instructions. Great fit-up! Super easy install!
Perfect fit
Awesome product, great fit up. Good hardware, heavy-duty brackets. Thick nice powder coating. Worth every penny.
Fit perfect on my 2019 Ram 2500
That was easy.
Good
Do you have a question about this Camper Tie-Down?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.