bing tracking image
  1. Camper Tie-Downs
  2. TorkLift
  3. Front Tie-Downs
  4. Frame-Mounted
  5. Powder Coated Steel
  6. Standard Disconnect
TorkLift Custom Frame-Mounted Camper Tie-Downs - Front

TorkLift Custom Frame-Mounted Camper Tie-Downs - Front

Item # TLF2020
lowest price pledge
Retail:$477.99
Our Price: $454.99
You Save: $23.00
Camper Tie-Downs

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 35 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Ready your truck to haul a camper with these sturdy tie-downs. Inserts slide into frame-mounted brackets for use and easily remove for a clean, unobtrusive look. Custom designed for your vehicle. Call 800-298-1624 to order TorkLift camper tie-downs part number TLF2020 or order online at etrailer.com. Free expert support on all TorkLift products. Guaranteed Lowest Price and Fastest Shipping for TorkLift Custom Frame-Mounted Camper Tie-Downs - Front. Camper Tie-Downs reviews from real customers.
  • All Info
  • Reviews (924)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

TorkLift Camper Tie-Downs - TLF2020

  • Front Tie-Downs
  • Frame-Mounted
  • TorkLift
  • Powder Coated Steel
  • Standard Disconnect

Ready your truck to haul a camper with these sturdy tie-downs. Inserts slide into frame-mounted brackets for use and easily remove for a clean, unobtrusive look. Custom designed for your vehicle.


Features:

  • Tie-downs provide attachment points at the front of your truck bed for securing a bed-mounted camper
    • Rear tie-downs sold separately
  • Frame-mounted design ensures excellent handling
    • Securing camper to truck's base instead of its bed better distributes weight to keep setup from being too top-heavy
  • Virtually undetectable when they're not in use
    • Tie-down inserts can be easily removed from frame-mounted receiver brackets with included pins
  • Custom fit for your vehicle
    • Brackets fit tight to truck frame - no loss of ground clearance
  • Powder coated steel construction
  • 2 Front tie-down inserts, frame brackets, and necessary hardware included
  • Made in the USA
  • Lifetime warranty


F2020 Tork Lift Tie Down - Front Frame Mount



This Product Fits The Following Vehicles

  • 2015 - 2020 Ford F-150 5-1/2 Foot Bed - with fixed board or step under cab but not extending to the bed and with a factory installed hitch
  • 2015 - 2020 Ford F-150 5-1/2 Foot Bed - with fixed board or step under cab but not extending to the bed and without a hitch



Video of TorkLift Custom Frame-Mounted Camper Tie-Downs - Front

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for TorkLift Front Frame-Mounted Camper Tie-Downs Review

Speaker 1: Today, we're going to be taking a look at TorkLift's line of custom frame mounted camper tie downs for the front. You want to verify here at etrailer.com using our fit guide, which ones work best for your vehicle. There are sets also available that will fit your vehicle available for the rear. These custom mounted brackets are going to provide an easy attachment point to hook up your camper.What's additionally great about those is that they have the removable ends. So when you're not using it, they'll be hidden away, and your vehicle will look like factory. The custom mounted brackets we're engineered to provide you with the best location for your tie down point to even distribute the load.

So, once they're attached, and adjusted. This'll keep your camper from being too top heavy. This'll increase the overall ride quality while you're campers attached, and the safety. It's made of a durable steel with a black powder coat finish, which'll ensure that you have a strong attachment point, and it'll be highly resistant to corrosion.When you are ready to use them, you can just slide in the attachment point. There's two points here to attach your turn buckles, and here on the shaft there are two points that will give you an adjustment inward, and outward, to specifically fit your camper.

So, you can use this hole for a wider camper, or this hole for an aero camper. Once you've got your appropriate hole, slide the pin through, and bring the latch over, and lock it in place. Then you can attach your turn buckles.Now if you need some turn buckles you can pick them up here at etrailer.com. There are many a different styles. From chain types, to quick attach lever types.

Our style is going to a be a threaded rod type that will hook to your camper, and down to our attachment point. We'll adjust it snug by turning our turn buckle here. With our passenger side done, we'll repeat that same step on our driver's side.Compared to stake pocket, our bumper mounted camper tie downs, frame mounted tie downs will provide better handling. They also mount out of sight, giving your truck a cleaner look, because the custom fit brackets secure tight against your trucks frame there is no loss of ground clearance. That completes our look at TorkLift's line of custom frame mounted camper tie downs for the front..


Customer Reviews

TorkLift Custom Frame-Mounted Camper Tie-Downs - Front - TLF2020

Average Customer Rating:  4.7 out of 5 stars   (922 Customer Reviews)

Ready your truck to haul a camper with these sturdy tie-downs. Inserts slide into frame-mounted brackets for use and easily remove for a clean, unobtrusive look. Custom designed for your vehicle.

- TLF2020
by:

Well I was not impressed with the paint work. Very poor paint work. Most people know that when you paint metal . You first must use primer on the metal before you apply final paint. Its not rocket science. Its obvious no primer was applied . The paint has pilled off in many areas exposing the bare metal, no primer and even a little rust. This demonstrates proof in lack of pride in workmanship within your company. It show the ( I don't care about quality attitude.) Now I will have to sandblast these parts myself , Prime with epoxy primer and paint again. I can only assume that now that you have my money . Who really cares. Would I recommend this product and your company online ??? You tell me


Comments
I reached out to Torklift and the ties downs are meant to be powder coated. I will have our customer service team reach out to you.
-- Etrailer Expert Jenny N - 12/23/2021


- TLF2020
by:

Easy to follow install instructions and able to 1 man install the kit. Took about 1 hour to install and once complete felt very secure, With help of rear supports as well it helped secure the cabover to truck for a more even load.



- TLF2020
by:

The product works great. Quite a bit of work to install but once they are on, all is well.



- TLF2020
by:

I think they are a little pricey but not aware of any better alternative for the F 150 with aluminum bed. Hats off to the engineers that design the hold downs. Install took about 2 hrs. Instructions were excellent and easy to follow. Great customer service from etrailer on the order.



- TLF2020
by:

Works great and easy install



- TLF2020
by:

Great dealing with them and fast shipping not to mention easy installation.



- TLF2016
by:

Review from a similar Frame-Mounted Front in Camper Tie-Downs


4 stars, just cause of the written instructions. Could be clearer. Product Review: F2016, 2012 Ford F250 extended cab 8' bed I really like the Torklift front tiedowns. I didn't feel I had the skill to fab the front tiedowns. The rear however, are rather simple. 2 1/2" 1/4" wall square pipe slips inside the factory hitch receiver. I used 27" lengths. The factory Ford hitch receiver curves towards the rear axle. Drilled and tapped thru receiver and pipe to hold it. Happy with the quick service from etrailer.com!



- TLC2217
by:

Review from a similar Frame-Mounted Front in Camper Tie-Downs


Jason was great to work with on getting the proper camper tie downs for my truck as it was a new truck and was a bit confused as to the proper application. I had them installed within an hour. Even an armature bolt twister could do this! I have used my camper a lot since putting these on my truck and will tell you these are THE MOST SECURE ANCHORS I have ever used on any of my trucks PERIOD! You will not make a bad decision going with this product. I recommend these tie downs over any product available! I Don't normally give recommendations or endorse products. These I am truly impressed with.


Comments
A year later and I couldnt be happier! I stand with my previous review 100
Charles F - 05/24/2021


- TLF2022
by:

Review from a similar Frame-Mounted Front in Camper Tie-Downs


I have a 2022 Ford F-250 super can. The frame mount tie downs went on great. You have to loosen leaf spring bolts to install brackets, passenger side bolt is 1 3/16 and drivers side is 1 1/4 so plan ahead. Need 3/4 drive brake bar too. Everything else was easy install. Nice strong mounts. I like them.



- TLF2021
by:

Review from a similar Frame-Mounted Front in Camper Tie-Downs


It fits but you have to force it into place on a 22 f350 CCLB. The top mount that ties into the bed mount sits too low on the driver and passenger side. Not quite a "exact fit" like advertised. Pictures of both the driver and passenger side added.



- TLD2140
by:

Review from a similar Frame-Mounted Front in Camper Tie-Downs


These do look to be of good quality and finish. That said, the packaging it was shipped had almost no paper to hold the items in place so the black finish had many large gouges in it. Then when installed the middle bolt snapped off inside the frame of my truck while torquing to 75lbs. I was using a torque wrench set at 75lbs. After finishing the installation I check fit and clearance. These were supposed to work with my truck configuration according to etrailer website, however they do clear the factory running boards.



- TLT2309
by:

Review from a similar Frame-Mounted Front in Camper Tie-Downs


A bit challenging even for a person with a lot of experience with tools. They want you to fish the bolt and washer through the frame and the mount at the same time, not going to happen with only 2 hands so i went to ace hardware and got some neoprene washers to slide over the bolts to hold them in the frame holes, then gently slid the mount onto the bolts. The drivers side bolts cannot be fished through the tight turns inside the frame with the washer attached to the bolt so getting the washer on the bolt while inside the frame was difficult. I was also concerned that my side exit exhaust would be in the way but as shown in the picture it wasnt an issue.



- TLF2021A
by:

Review from a similar Frame-Mounted Front in Camper Tie-Downs


The rear mounts were easy to mount. The only problem the package was missing 4 flat washers. I also just received the Front mounts. They were a little harder to mount by myself. Some advice is to watch the install on [video]. I ended up using a floor Jack to hold the mounts.



- TLC2223
by:

Review from a similar Frame-Mounted Front in Camper Tie-Downs


I bought this when my previous belly bar and rear tie-down bent badly when our truck slid off the road into a steep ditch and our camper nearly tipped sideways off our truck. This product is a bit better then my old set up, but I expected something much better for this very high price. It wasn't too tough to install, but that is despite the poorly written instructions. I am also disappointed that the tie-down point has a slot cut in it which seems would significantly weaken it. I am not optimistic that this will not bend or break if we have a similar significant side load such as when we slid into the ditch. I will probably weld the slot shut to strengthen this tie-down point.


Comments
They are starting to rust significantly. That is very disappoint considering the very high cost of these.
Floyd D - 11/11/2021


- TLT2310
by:

Review from a similar Frame-Mounted Front in Camper Tie-Downs


The rear camper mounts took 10 minutes each to install. The front ones took 22 minutes each. The mounting brackets are well built and designed. It would have been nice if the install instructions we’re online so we could have read them before we received the mounts.



- TLD2121
by:

Review from a similar Frame-Mounted Front in Camper Tie-Downs


Steve Z at etrailer was sharp and very knowledgeable on the companies product. Steve was able to work with me on getting the proper camper tie downs for my 2015 Dodge Ram 1500 (Item #TLD2121). He told me when they would be arriving and they actually arrived earlier than expected. Great product, install was pretty easy, I had them installed within an hour. This is a very high quality product with heavy duty construction. They provide a secure attachment for tie downs to the truck camper. The instructions provided are adequate, but not great. I Don't normally give recommendations or endorse products, but these I am truly impressed with. Thank you so much Steve and etrailer.



- TLC2205
by:

Review from a similar Frame-Mounted Front in Camper Tie-Downs


Best product for overhead camper tie-downs period. Instructions could use a little more detail and/clearer picture, but installation was relatively easy and only took approx. 2hrs to install. Much more secure than bed/bumper or stake pocket type tie downs.



- TLF2022
by:

Review from a similar Frame-Mounted Front in Camper Tie-Downs


Installed on my 2020 F250 Supeduty, they were easy to install. They were missing a few pieces of hardware but etrailer got the parts shipped out the next day. The front driver side plate did take a little puzzle like twisting to get around the brake lines but wasn’t really that difficult. I also purchased the rear tie downs and they are even easier to install. The front and rear took about 3 hours total to install. I only needed to buy a 32mm socket for the suspension bolt.



- TLF2022
by:

Review from a similar Frame-Mounted Front in Camper Tie-Downs


etrailer's service is 5 Star, as usual. My issue is with Torklift's poor quality in packaging accuracy for attaching the product. The front frame mount's instructions are lacking. The rear receiver mount is missing a split washer. And, for the Derringer hold down, the 8 nuts for the threaded rods are the wrong thread size thus won't go on to the rods.


Comments
I will have Customer Service reach out to you.
-- Etrailer Expert Thomas M - 01/13/2022


- TLD2130
by: 06/27/2021

Review from a similar Frame-Mounted Front in Camper Tie-Downs


These seem like a solid, well built product. Kind of a pain to install and the instruction manual could have been put together better but that’s just my two cents.



- TLF2022
by:

Review from a similar Frame-Mounted Front in Camper Tie-Downs


I recieved yesterday evening, the TorkLift frame mount Camper Tie-Downs. TLF2022 & TLF3008, Front and rear, For my 2022 F350, and I have already installed them. the next morning. Easy to install by myself, nice and strong. Easy directions to fallow. (Next super springs super sway stops SS65GR, and some TLA7311 lower stable loads.) Getting the truck setup to purchase a Artic Fox 865 Slide in Camper.



- TLT2310
by:

Review from a similar Frame-Mounted Front in Camper Tie-Downs


TorkLift frame mounted tie downs are awesome. Just installed them today on the new Tundra and they are impressive. I have used Happijac tie downs in the past and they work and do the job. I wanted something a little beefier and TorkLift is definitely what I was looking for. Fairly straight forward install, takes a little tinkering but the fit is perfect and there is no doubt TorkLift did their homework. Great quality steel and welds look good. Great work TorkLift! Ordering from etrailer is always easy and they seem to have customer service dialed. They have better information on their site than most manufacturers.



- TLD4101
by:

Review from a similar Frame-Mounted Front in Camper Tie-Downs


After reviewing my options to hold a 3500lb trailer on my truck. I decided these were the only option. They are more expensive then the other options that bolt to the body and the bumper, But much more secure. The install was fairly easy, Customer service from etrailer was awesome. When not in use they are barely visable. Great product, worth every penny! Thanks again



- TLC2219
by:

Review from a similar Frame-Mounted Front in Camper Tie-Downs


Installed on 2016 Chevrolet Silverado 2500 HD. Absolute perfect fit on both sides. Thx for all the videos online etc... No joking, I had each on in 15 minutes. One is always apprehensive about fish wires and interior frame bolts. No problem here. I did do one thing different than any thing I read in instructions or saw on the internet. When I removed the top stock box bolt, I hung the unit loosely from the bolt. There was plenty room to move it around and install the frame bolt with the fish wire. Never lifting or holding the unit during this part of the install. Simply inserted the bolt into the frame with wire and hardware then into the the slotted hole of the unit, and added washers and nut. On this unit there's only one interior frame bolt. The other is thru frame. Excellent powder coat. Fantastic packing and boxing. Truly a first class outfitter.


Comments
To date, the tie downs have been perfect. Theres no movement of the truck camper, very secure. Happy with entire application.
Patrick - 05/03/2021


- TLC2220
by:

Review from a similar Frame-Mounted Front in Camper Tie-Downs


I bought the TLC2220 for a low profile pop up cabover camper which I had for another Chevy 3/4 ton truck. The prior truck utilized a different attachment but was not available for my current 2012 Chevy truck. The TLC220 offers an excellent attachment point that is made out of thick well made steel and covered with a nice black powder coating. The instructions that came with the product should be thrown away. Pictures are poor, verbiage is incomplete and large gaps in the actual application. The saving grace is the video from etrailer. This is a great video. Complete, simple with no gaps and tells you exactly what the difficulties might be. This video even called out the socket sizes. Unfortunately the mate to this; the TLC 3212 rear mounts has a poor video with again gaps in application. And... again the TLC3212 written instructions is just fireplace starter material.


53
994
Show More Reviews

Ask the Experts about this TorkLift Camper Tie-Downs

Do you have a question about this Camper Tie-Down?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality camper tie-downs for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper tie-down information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Dustin K
Video Edited:
Dustin K
Employee Amanda M
Written by:
Amanda M
Employee David F
Installed by:
David F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624