Canvas awning swings out and around from the driver side to the rear of your vehicle, providing 69 sq ft of shade. Easy one-person setup with integrated drop-down poles. Bolts to your Rhino-Rack Pioneer platform or crossbars with top channels.
Features:
Specs:
Note: This awning is only compatible with crossbars that extend past the roof rack's legs.
Perfect for tailgating, outdoor markets, and camping, the Rhino-Rack Batwing provides shade anywhere you take your vehicle. The awning mounts to your Rhino-Rack Pioneer platform or crossbars with top channels. It is supported by built-in telescoping poles that let a single person set it up and break it down in minutes. Made of ripstop, polyester canvas that is resistant to UV rays, water, and mold, the awning swings out 270 degrees from your driver's side to provide you with 69 sq ft of shade. With different awning extensions (sold separately), you can expand the shade coverage or even create an enclosure around your vehicle. The Batwing's 50+ UPF protection has earned it an official endorsement by Cancer Council Australia.
Using just one motion, the Batwing unfolds 270 degrees from your vehicle's roof to provide 69 sq ft of shade. Just unzip the storage bag, flip the integrated storage pouch containing pegs and guy ropes out of the way, and bring the awning from the side of your vehicle toward the rear. Then, use the integrated tension strap to secure the awning to the back of your roof rack.
The telescoping support poles are built into the awning, which means you don't have to attach each pole separately during setup. Simply unclasp each pole from the built-in clips on the awning and drop them into position. After this, tighten the poles to the necessary height. You can also adjust the poles to different heights to suit any type of terrain, so the awning is always steady and secure.
When not in use, the poles are held in place by rare earth Neodymium magnets. Just push them toward the frame and they'll automatically secure to the housing.
After all the poles are set up, anchor them to the ground using the included pegs. The feet have 2 holes built in to let you drive 2 pegs into the ground at opposing sides for enhanced stability.
To bring the Batwing to maximum tension, attach the hooked guy ropes to the frame and secure them to the ground with the pegs. Using the additional tie-down point in the mid-section of the awning will allow rainwater to easily drain off. As an added benefit, the guy ropes have a bright orange color to improve visibility at night.
Strong and lightweight, the awning's ripstop, polyester canvas is waterproof, mold resistant, and UV protected. The telescoping poles and awning frame are constructed of aluminum and finished with a black powder coat, so they won't rust or fade when exposed to the weather. When not in use, all the parts are stored inside the heavy-duty PVC storage cover.
The Batwing has earned an endorsement from Cancer Council Australia for its UV protection. It received a 50+ UPF rating during independent testing, meaning it will allow less than 2 percent of effective UV transmission.
The included mounting brackets attach to the channels on the awning's frame and mount to your Pioneer platform or crossbars with top channels. Simply slide the nuts into the channels and tighten them down.
The Batwing will install to Rhino-Rack Heavy-Duty crossbars with a hardware kit (RR33101 - sold separately). To mount it to square and round roof rack crossbars, you will need to purchase a mounting kit (sold separately).
The Batwing has an optional 43 sq ft extension (RR32111 - sold separately) to provide more shade and improve your outdoor experience. With this extension, you can increase your overhead coverage or make a windbreaker or sidewall. It easily installs by zipping to the outer edges of the awning. And just like the Batwing, it uses telescoping poles, guy ropes, and pegs to secure to the ground. The extension is made of durable, ripstop polycotton canvas which is waterproof, mold resistant, and UV protected.
In addition to attaching extensions to the awning, the frame itself can hold additional accessories. The awning frame is compatible with channel mount accessories, like the Rhino-Rack shovel holder (RR43103 - sold separately). These accessories attach to the frame using the same channels you use to mount the awning to your roof rack.
Average Customer Rating: 4.9 out of 5 stars (16 Customer Reviews)
Canvas awning swings out and around from the driver side to the rear of your vehicle, providing 69 sq ft of shade. Easy one-person setup with integrated drop-down poles. Bolts to your Rhino-Rack Pioneer platform or crossbars with top channels.
Speedy shipping is back
Awesome job!
Awesome, love it. Easy setup, easy take down. Highly recommend.
This is my second Batwing awning and I would not camp without one.
Arrived quickly, great product at a great price.
The compact size awning is the perfect size we were looking for to mount to our JKU. Great service and communication from trailer. Way to go!
The compact Batwing was just the right size for our camping trailer. The awning was easy to install and easy to set up. Very anxious to enjoy it this summer. I would definitely recommend for those seeking shade in a clever product.????
Definitely the awning to get for the smaller SUVs. Deploys easily for one person. Was also easy to install.
etrailer shipped fast, had good communications, and the awning arrived in good shape. easy to mount and works great.
fast shipping
Do you have a question about this Car Awning?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.