Arrives before Christmas 
Customers prefer these similar products
10" Tall x 80" long combo ramps can be used to lift your vehicle for service, load it onto a trailer, or display it at a show. The 8.5 degree angle of approach is perfect for low-ground-clearance vehicles. Fit tires up to 12" wide.
Features:
Specs:
Race Ramps 80" Combo Ramps can be used to lift your vehicle for servicing, display it at a car show, or help load it onto a trailer. The ramps have an 8.5 degree angle of approach, which allows you to load a low-ground-clearance vehicle without worrying about scraping its front end. The 2 heavy-duty, foam ramps have a combined weight capacity of 3,000 lbs. A textured coating keeps the ramps from skidding when you drive up on them and protects them from water and automotive fluids.
Use the ramps in the service configuration to lift the front or rear of your vehicle 10" off the ground. This allows you to perform routine maintenance such as changing your oil, drive belt, or transmission fluid. It also eliminates the need for heavy jacks and cumbersome jackstands.
The incline section can be removed to convert the ramps into wheel crib configuration, providing maximum access and an unobstructed view of your vehicle's undercarriage. The standalone wheel cribs have a smaller footprint than traditional, bulky display platforms, so they're perfect for servicing and displaying your vehicle at car shows.
Use the trailer loading configuration to safely load your low-ground-clearance vehicle onto a trailer. To access this configuration, simply remove the incline section of the ramp and flip it over to reveal built-in cutouts. These cutouts support your trailer door and increase the overall length of your trailer loading ramp. This decreases the angle of approach to 8.5 degrees, allowing you to load your vehicle without fear of scraping the front end.
These ramps are made of ultra-strong, solid core, high-density EPS foam that won't crack or bounce. Each ramp supports 1,500 lbs - giving you a total weight capacity of 3,000 lbs for lifting a vehicle for service or display. When loading your car onto a trailer, the ramps can support a vehicle weighing up to 6,000 lbs because they are only ever supporting half of the vehicle at one time.
Combo ramps come in 4 pieces that slide together to form 2 ramps. The ramps are lightweight, weighing no more than 22 pounds per ramp, so you can transport and store them with ease.
The ramps are covered with a textured coating and are flat on one side. This keeps them from skidding when you drive up on them. The coating is a hybrid polyurea compound that is resistant to water and other automotive chemicals commonly found around the garage. And although this coating is durable, it will not scratch, mark, or scrape your garage floor or the ground.
A built-in handle on each ramp makes maneuvering them easier than heavier steel or aluminum ramps. The upper section of the ramps can also hang vertically to free up storage space in your trailer or garage.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jake: Hey guys, Jake here with etrailer. Today we're going to be taking a look at the line of race ramps. These ramps are designed to get your car that might have a low clearance up into your trailer. These are going to be different from the other ramps that you might be using, whether it be steel rams or if you're using wooden blocks. These are going to make it easier, so that you don't have to lug those around, or modify the back of your trailer.One of the things I really like about these ramps is they're going to look really stylish, while being very practical. It's going to have a foam construction, so it's going to be very, very light and easy to maneuver in and out of your trailer.
And it's going to have a nice black finish to it that has a little bit of grip, so that your tires don't slip when you're pulling on in wet conditions.One really nice characteristic about these ramps, is that there's going to be different length and height ramps for many different applications. So depending on your application, you're going to need to take a few measurements to be able to figure out which size ramp will be best for you. The longer ramps are going to be for your lower cars, and then your shorter rams are going to be for those cars that just need a little bit of help to not make contact with your ramp. We do have many different sizes here at etrailer.Here's a good example of the problem we want to fix. Now you'll notice here our angle of approach without our ramps is too steep to be able to get our car in.
Without our ramps we would drag our front bumper on our trailer.To get our ramp in place, we want to set them close, and then lower our gate with the extra overhang ramp folded up, you want to set your ramp down inside this groove, and then push your ramp up to the edge of your gate, and then just fold down your last flat. Now we'll go ahead and get our car loaded up into our trailer.It's also going to help with when unloading your vehicle.When you're all finished using them, they're going to be really easy to store. With this nice convenient handle, you can hook it on to any hook that you might have in your trailer. If you want to put them upright, you have that option. We like to store our shear in line with our wheel wells because we're not using that space anyway.The integrated handles are going to be really nice, because these ramps are black, so in the summertime when the sun is hot, the ramps can tend to get a little hot to be able to hold.
So this gives you an option to be able to transport your ramps without burning your hands.The ramps are going to have a 3000 pound weight capacity when paired with two ramps, but you're going to be able to pull a vehicle that weighs 6,000 pounds into a trailer.Well guys, with that being said, that's going to do it for our look at the line of Race Ramp Loading Ramps.
Average Customer Rating: 4.7 out of 5 stars (3 Customer Reviews)
10" Tall x 80" long combo ramps can be used to lift your vehicle for service, load it onto a trailer, or display it at a show. The 8.5 degree angle of approach is perfect for low-ground-clearance vehicles. Fit tires up to 12" wide.Race Ramps are always a great product, and I received these promptly.
Eric in customer service went way beyond expectations. I had an issue with an order not arriving with all the correct pieces (Race Ramps) Eric got the replacement pieces sent out the same day and also followed up with an email. This type of customer service is what we should expect from retailers, unfortunately in this day in age customer service at its worst. etrailer sets the bar high with its customer service. Great job!
Great service, fast delivery and excellent product ! Really needed for servicing the car !
Do you have a question about this Car Ramp?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.