10" Tall x 67" long ramps let you lift your vehicle for service or display. Ramp incline creates a 10.8 degree angle of approach. 2-piece design. Fit tires up to 12" wide.
Features:
Specs:
Race Ramps 67" XT Car Service Ramps can be used to lift your vehicle with low-ground-clearance 10" off the ground for service or display. This allows you to perform routine maintenance such as changing your oil, drive belt, or transmission fluid. The ramps have a 10.8 degree angle of approach, which allows you to lift your vehicle without worrying about scraping its front end. It also eliminates the need for heavy jacks and cumbersome jackstands.
The incline section can be removed to convert the ramps into wheel crib configuration, providing maximum access and an unobstructed view of your vehicle's undercarriage. The standalone wheel cribs have a smaller footprint than traditional, bulky display platforms, so they're perfect for servicing and displaying your vehicle at car shows.
These ramps are made of ultra-strong, solid core, high-density EPS foam that won't crack or bounce. Each ramp supports 1,500 lbs - giving you a total weight capacity of 3,000 lbs for lifting a vehicle for service or display.
They come in 4 pieces that slide together to form 2 ramps. The ramps are lightweight, weighing no more than 17 pounds per ramp, so you can transport and store them with ease.
The ramps are covered with a textured coating and are flat on one side. This keeps them from skidding when you drive up on them. The coating is a hybrid polyurea compound that is resistant to water and other automotive chemicals commonly found around the garage. And although this coating is durable, it will not scratch, mark, or scrape your garage floor or the ground.
A built-in handle on each ramp makes maneuvering them easier than heavier steel or aluminum ramps. The upper section of the ramps can also hang vertically to free up storage space in your trailer or garage.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we'll be taking a look at the Race Ramps XT Car Service Ramps, with a ten inch lift. Part number RR-XT-2. The race ramps car service ramps, help you get under your vehicle to stay on top of maintenance. These bad boys come in at 67 inches long, and are 14 inches wide. They offer a ten inch lift, and have a 10.8 degree incline. They're a two piece design, so they come apart for easy storage. They're made out of a polyurea foam, which makes them extremely lightweight.
They offer a 1500 pound, per ramp capacity, for a total of 3000 pounds. Now that we've gone over some of the features, I'll go ahead and show you what they look like in action. They offer a non-slip textured coating, so they won't slide, and they won't harm your shop floor. If your working outside . Like we here are today .. You just want to make sure you have a nice, clean area, free of any rock or debris. Now please keep in mind, these are not meant to be used with off road tires.
Let's go ahead pull on. The wheel stop let's me know I'm there. It's meant to accommodate a tire size up to 12 inches wide. That's going to complete our look at the Race Ramps XT Car Service Ramps with a 10 inch lift. Part number RR-XT-2.
Average Customer Rating: 5.0 out of 5 stars (21 Customer Reviews)
10" Tall x 67" long ramps let you lift your vehicle for service or display. Ramp incline creates a 10.8 degree angle of approach. 2-piece design. Fit tires up to 12" wide.Fast for ground shipping to alaska and better than 260 shipping.
Fast shipping even with the holidays and good interactive website totally pleased and will buy here again
Love these ramps! Wish I had them years ago. Great for getting under my Corvette
The ramps are made very well. They are solid, sturdy and light. Works very well for for decreasing my angle of approach into my toy hauler to load my gold cart.
Race Ramps are the best. etrailer delivery was top notch.
Ramps work great getting under my 2022 Dodge Challenger. Good quality.
I bought the Race Ramps and th extenders for my 2019 C7 Vette, and they are perfect! I highly recommend them!! And feel safe under the car…which (for me) is super important!
67" 2-piece Race Ramps are perfect for changing the oil on my Porsche Cayman GTS 4.0. The 10" raised height and no lift point interference with the underbody panels will make the job much easier. Further, I would give etrailer.com 6 stars for friendly, responsive customer service (from Odelia) when ordering. They arrived exactly as promised.
Perfect for servicing my 2017 CTS-V. Well made, light weight and have held up great, used them to service my son’s Honda Accord as well.
Awesome product. Ramps were on backorder and etrailer let me know my options upfront and was very helpful. I decided to wait it out for what I really wanted and it was worth it. Thank you etrailer for making my purchase very easy.
Purchased for home use. This works awesome for Infiniti G37 coupe. Even by yourself. Doesn't look like it is stout enough to hold the car up, but it does! I'm going to try out my Tacoma on it for some routine maintenance this weekend.
The fact the rear can be removed is a great idea. AND? It's made in the USA!!!
Very pleased with my purchase and customer service, highly recommend this company would happily do business with them again!
Works on my 2018 camaro ss. Works well. Easy to change oil and etc.
Do you have a question about this Car Ramp?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.