Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Features:
Specs:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location within your trunk.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
California residents: click here
Average Customer Rating: 4.6 out of 5 stars (23 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.My package for the Curt trailer wiring assembly for the 2008 Kia Sadona was missing the wire connectors, the fuse, the ring connector for the 12GA wire, the zip ties, and the two sided tape. I was not happy with it at all!
The instructions for this confused me at first. I watched a video on how to install it, and followed those instructions after looking at a picture that came with the harness, it seemed to match. I then installed the blue/green wires on the left side and attempted to run the Yellow/White to the other side, but it was not long enough to reach. I then checked the written instructions and it said to do the reverse, so good thing it did not work the first time.
Installing the ballast was a bit of a problem. The picture showed it double sided taped to the back of the lens cover on the left side,but after attaching it there, I was unable to put the light back into place. I managed to move it down and squeeze it into the gap under the light, between the bumper and the frame, and then everything fit.
Once that was in place, all the rest installed easily, and worked with the boat no problems. I would blame my initial installation error on simple laziness. I hate reading instructions unless I really need to. ;)
Good product, working perfectly so far.
The products I received , trailer hitch ,and wiring harness , were perfect . Bolt holes lined up perfectly. Wiring harness ,and directions were very simple to read , and install went according to plan . Very Happy. Products , were delivered in a timely manner. Great.
Great trailer hitch. Fit perfect. Installation video was very helpful. Delivery was in two days! I will definitely buy from you again. I wish all of my purchases were this easy.
All the trailer needs I've had e-trailer always has what I need. Thankx
I had to have a company UHaul install this unit as they installed a hitch
Eugene C.
10/6/2021
Installed at U Haul rental company .Works great. Great product
I installed wiring harness my self and everything worked perfectly.
Shipping came as planned too.
Thanks
Good instructions,easy to install works great have had no problem
Great product,fast shipping,over all I will be buying from etrailer again
Kit was totally inclusive and super easy to install. Also, it was very reasonably priced and delivered quickly. I was very satisfied with the product and the service.
Just as advertised. Easy to install. Works perfectly.
Great product a little tricky to run wires without being seen
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
10/6/2021
Thankyou for bringing this to our attention. Our customer service team should be reaching out to you in the near future.