1. Custom Fit Vehicle Wiring
  2. Draw-Tite
  3. Universal Fit
  4. Fifth Wheel and Gooseneck Wiring
  5. 7 Blade
  6. 7 Feet Long
7-Way Pre-Wired Car Connector, 7' Lead

7-Way Pre-Wired Car Connector, 7' Lead

Item # 20023
lowest price pledge
Our Price: $80.65
You Save: 30%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 2 lbs
In Stock
Draw-Tite 7 Blade Custom Fit Vehicle Wiring - 20023
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Call 800-298-1624 to order Draw-Tite custom fit vehicle wiring part number 20023 or order online at etrailer.com. Free expert support on all Draw-Tite products. Guaranteed Lowest Price and Fastest Shipping for 7-Way Pre-Wired Car Connector, 7' Lead. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (34)
  • Q & A (140)
  • Videos (2)
  • Photos
  • Why etrailer?

Draw-Tite Custom Fit Vehicle Wiring - 20023

  • Universal Fit
  • Fifth Wheel and Gooseneck Wiring
  • 7 Blade
  • Draw-Tite
  • 7 Feet Long

  • Allows Remote Trailer Wiring in Pickup Beds or Other Hard to Access Areas When Towing 5th Wheel or Gooseneck Trailers
  • Exact Replacement for O.E.M. Connectors
  • Durable Plastic Shell
  • Weathertight Seal
  • Gauge of wires:
    • White and black wires: 10 gauge
    • Blue wire: 12 gauge
    • Brown, red, yellow and green wires: 14 gauge

20223 7-Way Pre-Wired Car Connector, 7' Lead

This Product Fits The Following Vehicles

California residents: click here

Video of 7-Way Pre-Wired Car Connector, 7' Lead

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Draw-Tite 7-Way Pre-Wired Car Connector Installation - 1996 Ford F-250 and F-350

Clayton: Hello, everyone. Clayton here at etrailer.com. Today, we'll be taking a look at, and I'll show you how to install the Draw-Tite seven-way, pre-wired connector on our 1996 Ford F350.Our seven-way connector is going to allow us to hook up to a lot of different trailers and leave that wiring in our bed. So we're not going to have to fold it over our tailgate or extend it if it's not long enough. It's really going to make our life a lot easier. All we have to do is splice it in to our factory seven way.Our connector is going to be made out of a durable plastic, so it's going to hold up to all weather really well.

It also has a really nice seal on the inside here to keep any dirt, debris and water from getting in our connector and grounding it out. So it's really going to hold up well on the truck bed and you're not going to have to worry about things bouncing around and hitting it. It's not going to break. It's going to sit here really nice, and it looks nice in the bed of our truck.And in terms of installation, it's really not that hard. We just have to drill a hole in the bed, drop our wires down and splice into our factory seven way.

And speaking of installation, I'll show you how easy it is to get installed on your truck.To start our installation, we want to find a good spot to mount our plug. Now our customer already had a hole drilled right here, but our plug isn't quite big enough to fit through there. So we are just going to enlarge this a little bit, just to make sure that our plug is going to fit through the hole. Now we're going to open this hole up with a two-inch hole saw. You want to try to locate a good spot that way we can make sure everything fits nicely.

We want this lip up here to be flush with this line in the bed. So if we hold it up like this, it might be easier to turn it over, and try to gauge how far down we need to drill. So it's looking like I'm going to need to drill right about here. We're going to go in really carefully just since there's already a hole in our bed.Now with this drilled out, we want to come back with a file and inaudible 00:01:58 any of those burrs around the edge. That way we don't accidentally cut ourselves when we're working with it.

Now I'm going to come back with some clear coat and just paint all these rough edges that already don't have to worry about rust in the future. Now, with our clear coat drive, we can grab our plug and make sure it fits. It fits up just like we wanted. It's flush along the top and there's no exposed hole. We can now grab our wiring harness. We're going to take our ends with the loose wires and just drop this through the hole. This will come out the bottom.We can now grab our plug and push it into our connector. Then pull and make sure it's not going to go anywhere. And I'm going to come back with some electrical tape and just tape around this connector before we fastened the whole thing to our bed. I can now push our connector through the hole. We want to push it all the way to where it's flush and you grab some self-tapping screws and just fasten this to our bed. It can be kind of tight just cause there is a little bit of tension on our plug due to where the wire is placed behind. We'll start nice and slow.Now at our second self-tapper, it seems pretty secure there. Now we'll add our last two and make our connections underneath. We'll try to shake our seven way. It seems really secure. You don't have to worry about it ripping out. Now let's go underneath and make those connections.This is where a harness dropped out. We want to route it over our frame rail. Now there is a nice body mount here that we can zip tie everything to. We're just going to reach over and drop this down. You want to stay out of the way of anything hot or moving.I'm going to zip tie our new wiring harness to this factory wiring here. Since it is kind of loose back here, we don't want to flopping around or moving. We are going to be tapping into our factory seven way, so we're going to want to strip back all of this wire loom back to here where we're going to make our connections. We're going to have plenty of room to make our connections here and a lot of room to hide all this extra wire.Our factory harness has electrical tape and these plastic, zip tie connectors. They are pretty rotted so we can just pull them off. But if they're not, you'll have to cut them off. We're not ready to make our connections. We're going to go green to green, brown to brown, yellow to yellow, blue to blue, black to black, orange to red. And then we're going to ground our white wire somewhere else, probably on this frame rail up here.We're now ready to cut off our ring terminal for our ground. We're going to strip everything back quite a bit and double it over and use a yellow heat-shrink butt connector. If you don't have butt connectors, you can find those here at etrailer.com. Some of these wires are thicker than the others, like the blue, white and the black. So we're not going to have to double those over, but the other ones I would recommend doubling them over just so they fit better in our butt connectors.With our butt connectors crimped on, we are now ready to make our connections. Our factory seven way has a diagram on the front that tells us which wire does what. So we'll start with our taillight signal and on our harness, that's going to be our brown wire. We'll look on here for our running lights. It looks like this pen up here, which comes back to the brown wire on our seven way. So we want to cut our brown wire. We'll try to do it right up here. Then we'll strip back both sides and then crimp them together. We're now ready to grab our brown wire. We're going to strip back quite a bit. We're going to twist it and double it over to fit in our yellow heat-shrink butt connector.Then we'll strip back this side and then we're going to grab our brown wire on our new harness. We're going to strip it back pretty far as well. Then what we're going to do is we're going to twist these together and then crimp them into that other side of the heat-shrink butt connector. And this will tie in our new wiring with our factory seven way. We're going to repeat this exact same process for the rest of our connections.Just like that. With all of our heat-shrink butt connectors melted down, I'm now going to take some electrical tape and just run it around this. I'm just going to start down here and work my way up. So I'm just going to grab the wire loom from our kit and work it as far up on this as I can. And I'll trim it off. We'll grab some more wire loom. If you don't have any, you can find some here at etrailer.com.With all our wiring cleaned up, we can now mount our ground. I'm going to run our ground right here. This is a good location. We can file it down a little bit, just for a better connection. Then once we get that ground mounted, we're going to come in and clean up all of our extra wiring.With everything hooked up, let's lower the truck down and test it out. With our tester hooked up, we can now check all of our functions. We'll start with our brake lights, our running lights, our left turn, and our right turn. With everything, hooked up and tested out, we're ready to hit the road and that's up to our favorite trailer. That's going to do it for our look and installation of the Draw-Tite seven way pre-wired connector on our 1996 Ford F350.

Customer Reviews

7-Way Pre-Wired Car Connector, 7' Lead - 20023

Average Customer Rating:  4.8 out of 5 stars   (34 Customer Reviews)

- 20023
Ford F-150

This curt 15300 is a beast. Over rated for my f150 but rather be over kill than unsafe. Mounts right up after drilling 6 holes in frame. I feel like its a very safe choice. On the farm you never know what i might need to do with it. Very happy. And shipped out and had it on the 2nd day. Installed in bout an hour. Dull bits otherwise 30 min could of been done.

- 20023
1997 Dodge Ram Pickup

This replaced the connector and wiring on my 97 Dodge Ram 2500. There just wasn't much left of the connectors after 20+ years! I mounted it in the box for convenience for plugging in the 5th wheel. I used an extension for a regular trailer.

- 20023
1997 Chevrolet Silverado

The wiring harness came with everything I needed to wire up my 1997 Silverado for my new bass boat. It took an hour or two to find all the wires I needed and tap into them. The only thing i would change if I could would be to include more zip ties in a larger size. Other than that I have hauled my boat a few times and all of the wiring works great along with the trailer brakes. If I ever have another truck I need to wire a seven pin connector to I will buy this kit again.

- 20023

Well made and recommended.

- 20023

Part was exactly as advertised. Can't wait to install it!

- 20023
2001 Dodge Ram Pickup

Excellent quality and fast shipping

- 20023
1997 Chevrolet C/K Series Pickup

If you need to wire your vehicle for a 7 pin plug be smart and by this kit. It has all you need to make your life easy.

It wiring harness is still work well.
Keith J - 07/06/2018

- 20023
1992 Ford F-250 and F-350

I just finished test fitting all the components of the system and found it very easy and enjoyable. The only problem I noticed was the packaging was far from robust enough to handle the product. Three of the four box's were severely damaged and were only held together by a mass amount of packing tape which made opening tough. I should have taken pictures my mistake, but wanted too make sure all components were present and accounted for which they were. Great system and was a pleasure to deal with, thanks for the great product and will sent pictures when installed in truck...

- 20023
1995 Chevrolet C/K Series Pickup

Hi Carol ,, This wire harness was exactly as you said it would be. It was a breeze to install and it worked perfect. I was completely satisfied... Bravo !!!

- 20023
1991 Ford F-150, F-250, F-350

Great replacement for the 9 pole connector that was on this older truck. The fit was perfect and a previous question that I found on the site (https://www.etrailer.com/question-59450.html) helped me make the connection in no time. Now the vehicle is wired to two contemporary trailers. Thanks!

- 20023

This wiring kit is awesome. Had it installed in under 25 minutes. Have had it installed for a year now and I use my truck everyday to tow so this plug and harness is being used daily. I don’t have any pictures on my phone of it unless I would post them. Highly recommended for the price and the ease of installation and quality!

- 20023

It has worked like it should but it was up to the driver to make it happen. Installing it was a bit hard, the truck did not like drilling into it. Broke two 1/2 inch drill bits

- 20023

Great wiring harness. Has held up well over the year. No issues.

- 20023
1986 GMC C/K Series Pickup

Received the 7-way kit and installed it the same day. Kit is complete and a easy way to add a 5-th wheel style plug to your truck.

- 20023

Excellent product. Makes wiring for a trailer easy and clean.

- 20023

Well thanks I have costumer that really need to get his work done and it’s so happy because now hi has exactly what he was looking for. And I I’m happy to, I get the right parts for his work truck

- 20023

Great quality products and fine customer service. Would highly recommend and buy again.

- 20023
1996 Chevrolet C/K Series Pickup

The wiring kit came fast and packaged well. THanks!

- 20023

Installing soon but looks exactly what I need.

- 20023
1995 Ford F-250 and F-350

part delivered in timely manner got just what i ordered

- 20023

The product was fine,great customer service!!! Just call the and get information..Thank You

- 20023

Fast shipping. Exactly as listed. Worked perfectly.

- 20023
2000 Chevrolet C/K Series Pickup

Product arrive timely and was exactly what I ordered. It was packaged well. Thanks.

- 20023

Shipped fast, great product

- 20023

Ordered on a Saturday and had it Thursday. Seems like everything will work great. Prices were the best I could find.

Show More Reviews

Ask the Experts about this Draw-Tite Custom Fit Vehicle Wiring

  • How Does 7-Way and Brake Controller Install in 1973 Ford F-350
    For a truck as old as yours it would be pretty hard to find a wiring diagram for installing the 7-way part # 20023 but I can help you figure it out using a circuit tester like the part # PTW2993. Basically you are going to need to test all of the wires of your taillights to determine their function and then wire to the 7-way using the included diagram. Now hardwiring in a brake controller will be a similar process but you'll only have to test the wires at the brake switch till you find...
    view full answer...
    Image 1 for Image 2 for
  • Parts Needed to Install Brake Controller in 1989 Ford F-350
    To install a 7-way and a brake controller in your 1989 Ford F-350 you will need the 7-way kit part # 20023 a brake controller like the Draw Tite iCommand # 5535 and a little more wiring. For a wiring kit to install the brake controller to the 7-way you would want the Wiring Kit for 2 and 4 Brake Electric Brake Controllers # 5506. This will provide the power source and ground for the wiring for the brake controller. You will need to test the wires from the brake pedal switch of your...
    view full answer...
  • Connecting 7-Way Trailer Connector to 2015 Subaru Outback Wagon
    Yes, you need to combine the stop and turn signals because the trailer connectors use combined wiring. There's a couple ways you can do this. The easiest from scratch is to get a 4-way wiring harness that's plug and play into your 2015 Subaru Outback and then convert it to a 7-way. You can use part # 118467 for the 4-way and we have our own conversion kit using part # ETBC7. Part # 118467 includes a converter to combine the wiring and then use our kit to convert that 4-way to a fully...
    view full answer...
  • Parts Needed to Install 7-Way on 2002 Toyota Tundra with 4-Way
    If your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how...
    view full answer...
  • Recommended Trailer Wiring for 7-Way Trailer Connection and Brake Controller for 1986 Ford F-350
    For your 1986 Ford F-350, the factory wiring connector you need to start with is the T-One Vehicle Wiring Harness with 4-Pole Flat # 118313. This custom-fit T-One connector plugs into your Ford F-350's wiring harness, which is located beneath your vehicle along the driver's-side frame rail. Then you will need to use the Universal Brake Controller Wiring Kit # ETBC7 to utilize that 4-way connection and add the other 3 functions of reverse, 12v, and brake controller output. This kit...
    view full answer...
  • Fifth Wheel and Gooseneck Wiring Harness for 1996 Ford F-250
    Though we do have an option for you, the wiring harness you mentioned will not work for your 1996 Ford F-250, even with the 7-way you have already on your truck. While I know it isn't the plug-in type of harness you were looking for, the only option that is available for your truck to add a 5th wheel/gooseneck in-bed wiring harness is the 7-Way Pre-Wired Car Connector # 20023. This is a hard-wire connection but it does come with the splices and butt connectors needed for installation,...
    view full answer...
  • 7-Way Trailer Wiring Recommendation for 2002 Toyota Tundra
    If you removed all of the wiring of your 2002 Toyota Tundra when you removed the bed you'd want a 7-way kit like the part # 20023 which will wire into the truck's current wiring. Otherwise the 4-way kit part # 118378 plugs into factory wiring to provide a 4-way. To convert the 4-way then to a 7-way so you can install a brake controller will require the install kit part # ETBC7. I attached a couple install videos for these kits for you to check out as well.
    view full answer...
  • Troubleshooting Left Turn and Running Light Trailer Functions on a 1997 Ford F-350 4x4
    It sounds like you spliced in a second 7-Way connector like part # 20023 to the current 7-Way wiring on your 1997 Ford F-350 for an in-bed camper and the lights on the camper aren't working. Is the original 7-Way testing correctly? If it is but the in-bed 7-Way isn't testing correctly then you have isolated the issue to the wiring harness that you installed. If neither are working correctly then I would try testing the wiring before the splice with a circuit tester like part # 40376 to...
    view full answer...
    Image 1 for
  • How to Determine Wire Color Functions for 7-Way Connector on a 1997 Ford F-350
    Attached is a picture of the typical wiring colors for the wiring on a vehicle-side 7-Way connector. This may differ from your 1997 Ford F-350 though for a few reasons. The first is that vehicle manufacturers don't always follow this wiring configuration so it is very likely the OEM wiring is different. The other reason is that since your vehicle is older it is very possible that someone else has done surgery on the OEM wiring and they could have used whatever color wiring they had...
    view full answer...
    Image 1 for
  • How to Replace a 7-Way Trailer Connector on a 1997 Ford F-250
    The 7-Way Pre-Wired Car Connector part # 20023 is an exact Replacement for O.E.M. USCAR Connectors. If you have this connector under the rear of your vehicle, then yes, it will work for you. If you do not have this plug-in, you will want to use the Hopkins Endurance 7-Way Trailer Connector Socket part # HM48480 as this will allow you to simply cut the existing 7-way off and attach the wires to the back of the new connector using the provided wiring terminals. If you wish to have...
    view full answer...
  • Is Draw Tite 20023 Long Enough for 8 Foot Bed on 1990 Chevy C/K Series Pickup?
    The Draw-Tite 7-Way Pre-Wired Car Connector # 20023 has a 7 foot lead, which should be plenty of length to work with the 8-foot bed of your 1990 Chevy C/K Series Pickup. The directions are straightforward and not particularly lengthy; I've sent them to you so that you can determine if this is a job you want to attempt yourself. I've also added a link to a video review of this part for you to take a look at.
    view full answer...
  • How To Install 7-Way Trailer Connector On a 2001 Dodge Ram 1500
    In order to install a 7-way trailer connector on a 2001 Dodge Ram 1500 you have a few options which will be dependent on if the truck was equipped with a factory 7-way trailer connector or not. If so, then you can use the 7-Way Pre-Wired Car Connector part # 20023 which will require splicing on the new pigtail. If not, you'll need both the T-One Vehicle Wiring Harness part # 118329 and the 7-Way RV and 4-Way Flat Adapter part # ETBC7 which is mostly plug-n-play. I wish I could give you...
    view full answer...
  • Looking to Add Plug and Play 7-Way Wiring Harness to Bed of 2007 Dodge Ram 3500
    As long as your 2007 Dodge Ram Pickup is equipped with a factory 7-way, you can use the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness, # HM42137. This harness will plug into the existing wiring to give you a 7-way in the bed and also retain the use of the 7-way at the back of your truck. I have included a video for you. The 7-Way Pre-Wired Car Connector, # 20023, is not a plug and play option. Wiring would be required.
    view full answer...
  • Recommended Plug-In In-Bed Wiring Harness for a 1996 Ford F-350
    In order to add an in-bed wiring harness to a 1996 Ford F-350 you must splice using the 7-Way Pre-Wired Car Connector part # 20023. The reason for this is that they do not offer a plug and play in-bed wiring harness for a 1996 Ford F-350 like the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness part # HM40157 that you were looking at which fits the newer F-350's. Please note, the 7-Way Pre-Wired Car Connector comes with everything you need for installation so although it...
    view full answer...
  • How Do I Supply Power From My Truck Alternator to Truck Bed Camper
    You would not need a 2nd voltage regulator for this application, in fact, if your 1997 GMC K2500 pickup has a 7 way connector on it already you could likely just use the 7 way to supply enough power to keep your truck bed camper's battery sufficiently charged. If you don't already have a 7 way, you can use the Draw-Tite Pre Wired 7 Way # 20023 to wire one onto your truck;if your truck already has a 7 way connector you can also install this in your truck bed to provide you with a closer...
    view full answer...
  • Adding a 7-Way Trailer Connector and Brake Controller to a 1997 Chevy K1500
    You can add a 7-Way connector to your truck but it requires some hard wiring. If your 1997 Chevy K1500 does not already have any trailer connector you would start by installing a 4-Way, # 118315. Then you would need to install 4 and 7-Way installation kit # ETBC7. If your truck already has a 4-Way then you will not need to install a different one. I have included some links that show and explain the ETBC7 installation. The ETBC7 harness also includes the parts needed to wire up a brake...
    view full answer...
  • Adding a 7-Way Connector to 1996 Ford F-350 for Slide-In Camper
    To add a 7-way to your 1996 Ford F-350 you will want to install the 7-Way Pre-Wired Car Connector # 20023, which is a confirmed fit for your truck. I've added a link to a help article on trailer wiring which details the functions of the connector. This will be a hard wire application and includes the installation instructions. As for an isolator I believe you are referring to a solenoid. For that you want the Tow Ready Battery Isolation Solenoid # TR118665 which is going to switch off your...
    view full answer...
  • Adding a 7-Way Wiring Connector to a 1993 Ford F-150
    While I'm not sure if the wiring for a 7-Way is pre-ran for your 1993 Ford F-150, I can say that if it does exist you will find it at the back of your pickup typically attached to the frame. You will need to use a circuit tester like part # PTW2979 to verify which wires you need to connect the Draw-Tite # 20023 to. If that wiring isn't there you can use the T-One # 118316 which tees in behind your bumper on the driver's side, and then install the Universal Wiring Kit # ETBC7 for a fully...
    view full answer...
  • Availability of Replacement 7-Pole, RV-Style Trailer Connector Plug for 1995 Ford F-250 and F-350
    Yes, you will want the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket, # PK11893. This 7-pole, sealed, RV-style trailer connector plugs into the factory socket on your Ford truck and is an exact OE replacement on Ford trucks. The plug features the brake light and turn functions on the second pins from the top, on either side. I would double check that your factory harness connector has these functions located on the same pins, in the off chance that there may be a mis-wire...
    view full answer...
  • US Car Connector Wiring Functions And Color
    For your 1998 Dodge Ram 1500, I recommend connecting the 7-Way Pre-Wired Car Connector, 7' Lead # 20023 by function as the colors are not always the same as you referenced. The functions based on color of this harness to help you are US Car Connector standard as follows: Black---12V power White--ground Red---left turn and stop Brown--Tail and running lights Green-- right turn and stop Yellow---reverse lights Blue---electric brakes I recommend using a circuit tester like # PTW2993...
    view full answer...
  • Installation of 7-Way Trailer Connector on 1996 Ford F-250
    We do not have a plug in solution for those connectors under the rear of your truck bed, if you wish to utilize those existing connectors you would need to obtain the trailer connector from your Ford dealer. This being said, you can cut those connectors off, and hard wire in a 7-way connector pretty easily. I would recommend using the Hopkins Multi-Tow Trailer Connector, part # HM48470. The blue and orange wires attached to the one connector feed the brake controller output and the 12-volt...
    view full answer...
  • Recommended Goose Neck Hitch and Wiring for 1997 Dodge Ram 2500 Pickup
    You will use a 2-3/8-inch hole saw to create a mounting hole for the gooseneck wiring kit # 20023 which fits your 1997 Dodge Ram Pickup. An install video is linked. The linked hitch page will show you all goose neck hitch choices for your truck and these include the B&W # BWGNRK1394 turnoverball that requires a 4-inch hole in the bed. Bed lengths are measured WITHOUT the tailgate and the above B&W hitch fits your 8-foot bed.
    view full answer...
  • Wire Size Gauge on 7-way Pre-wired Connector, part # 20023
    The 7-Way Pre-Wired Car Connector, 7 foot Lead, item # 20023, has 7 wires. The white and black wires are 10 gauge, the blue wire is 12 gauge, and the brown, red, yellow and green wires are 14 gauge. The connector allows you to have your trailer wiring in the bed of your truck for towing 5th wheel and gooseneck trailers.
    view full answer...
  • Fifth Wheel 7-Way Recommendation for 1999 Chevy Truck
    Sounds like you are looking for a 7-way that you can install in the bed of your truck so that the connector of your fifth wheel can easily connect to it. For a 7-way to install in the bed of your truck to make connecting your trailer lights easier you would want the part # 41157. Most 7-ways will be at the rear of the truck near the bumper which doesn't work will with fifth wheel hitches. This kit installs in line with the 7-way at the rear of your truck and gives you a second one to...
    view full answer...
  • Should 12V Power on 1997 Ford F-250 Shut Off with Ignition on Aftermarket 7-Way
    If you are installing a 7-Way like the Draw-Tite # 20023 on your 1997 Ford F-250 then it is completely up to you. We recommend just routing the wire directly to the positive terminal on your battery. However if you would like the 12V power to stop running when your ignition is off then you can install the Isolation Solenoid # TR118665 to do so. Attached are review videos of the 7-Way and the solenoid for you to check out.
    view full answer...
  • Availability of a Plug and Play Fifth Wheel/Gooseneck 7-Way Harness for a 2007 Ford F-350
    Yes, there is a kit available that will plug into the factory harness and run up to the bed so you can connect your fifth wheel. You could use any of the following: Draw-Tite part # 20110, Pollak part # PK11893-11932 , or Draw-Tite part # 54701-003.
    view full answer...
  • Adding a 7-Way in the Bed of a 1999 GMC 2500
    To add a 7-Way trailer connector to the bed of your 1999 GMC truck you have some options. First, if the truck came with a factory 7-Way then you can just use # C56080 which will plug into the 7-Way at the rear of the truck. If your truck does not have a 7-Way then you would first need to install one. To do this you can use # ETBC7. For this to install you would need to have a 4-Way flat trailer connector at the back of the truck. If you do not then you can install one, # 118315, and...
    view full answer...
  • Replacement Trailer Wiring for 1999 Chevrolet C/K Series Pickup
    If you want to replace your corroded 7-way trailer socket on your 1999 Chevrolet C/K Series Pickup you can use part # 20023 from Draw-Tite. This kit consists of a new 7-way socket, mounting bracket, pigtail harness for connecting to your truck wiring along with required fasteners. If instead you would rather just install a matching 4-pole to directly fit the 4-pole on the trailer then use part # 18252 which includes a circuit tester that is helpful for confirming the function carried...
    view full answer...
  • 5th Wheel Trailer Hitch Wiring Adapter Retains Use of Rear 7-Way for 2008 Ford F-450 Super Duty
    There is a specific wiring harness for your 2008 Ford F-450 Super Duty that is a better fit than the 20023 wiring harness. You will need Draw-Tite Fifth Wheel and Gooseneck Wiring Harness # 20110. For this harness, your vehicle will have to have a factory tow package, which you have indicated that your truck does. The harness plugs in between the the OEM wiring harness and the factory 7-Way connector. You will still be able to use the factory 7-Way with this harness installed. I have...
    view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality custom fit vehicle wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee DeAnne T
Expert Research:
DeAnne T
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeff D
Installed by:
Jeff D
Employee Jacob T
Video Edited:
Jacob T
Employee Alexander C
Updated by:
Alexander C
Employee Clayton O
Test Fit:
Clayton O

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.