To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Replace the existing 7-way on your vehicle with this socket. Built-in magnet creates tight connection with EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no bent or broken terminals.
Features:
Specs:
This vehicle-end trailer connector gives you the functionality of a 7-way, but without any pins or blades to bend or break. It's designed to work with a matching EZ Connector plug (sold separately) to create a secure, watertight connection that lasts. Strong magnets in both the plug and the socket keep the connection tight and secure, even when you're driving on rough terrain. Built-in O-rings on the dummy plug create a seal to keep out water and debris while the connector is not in use. And spring-loaded, face-to-face electrical contacts are long-lasting and easy to clean. These factors combine for a strong, durable connection that's easy to use and to maintain.
The EZ Connector system uses magnets inside the plug and socket to hold the connectors together. Simply insert the trailer-end plug (sold separately) into this vehicle-end socket and the internal magnets will snap them together, no latch needed. To disconnect, just pull the plug out by hand.
This is an improvement over typical trailer connectors, which rely on a plastic latch on the socket lid to hold the trailer plug in place. With any trailer connector it can be easy to forget to disconnect the wiring when you unhook your trailer. If you drive off without disconnecting a standard 7-way plug, the connector will get pulled out of the socket, likely tearing off the lid. Without a lid, the electrical terminals are exposed to damaging moisture and debris. But if you forget to remove the EZ Connector plug when unhooking your trailer, the plug will simply disconnect from the receptacle as you drive off.
The magnet inside of this trailer connector is made of neodymium, an extra-strong, rare-earth alloy. This high-quality magnet ensures a tight connection between the connectors that is stable enough to make it through intense bumps and road vibration.
The EZ Connector trailer-end plug (sold separately) has a double O-ring that will create a seal when it's inserted into this connector. When the socket is not in use, just insert the included dummy plug, which also has a double O-ring, into the connector. This ensures that the terminals on this vehicle-end socket stay protected from moisture and debris at all times.
All of the EZ Connector systems have earned a perfect score on the SAE water submersion test. This means that the seal created on this connector, either with the dummy plug or with the EZ Connector trailer-end plug, will stay watertight, even if the connector is completely submerged in water for extended periods of time.
This EZ Connector socket has spring-loaded, face-to-face electrical contacts instead of pins or blades. Pins and blades can bend, corrode, and even break off, which can lead to a permanently damaged connection. With the EZ Connector system, there are no pins or blades to bend or break. Because there are no pins or blades, there are also no pin sockets on the trailer-end plug (sold separately) that can trap debris. And if any dirt or debris does collect on the terminals of either end of an EZ Connector setup, it can be quickly and easily wiped away. No more scraping pins to get grime off. The result of all of this is a quality, effective connection every time you plug in.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to be taking a look at the easy connector magnetic seven way railer connectors. They're available in a kit with the trailer end and the vehicle end for your specific vehicle. It's also available individually as the trailer end in different lengths. Or individually as the vehicle end for your specific vehicle.These magnetic trailer connectors take the hassle out of loose connection, bent or broken terminals, and rust or corrosion. The built in magnet makes for a secure seal and the o rings make for a water tight seal. The notches ensure that you will always connect it properly.
Depending on your vehicle, it can easily be connected to your existing seven way, or in older models it can be easily wired in. The trailer end simply connects to your trailer's existing wiring. Every trailer is different. Here we've got it wired up and to our junction box using some ring terminals.When connecting it keep in mind that your white is your ground, your brown is your right turn, black is your auxiliary power, green is your running lights, yellow is your backup lights, blue is your brakes, and red is your left turn. It does come with flood connectors if you choose to wire it up that way, and protective heat shrink coating.
Also included is a magnetic plug holder that you can attach anywhere on your trailer. It's great for keeping your trailer end up and out of the way when not connected. It also includes a bracket to attach your vehicle end to your trailer hitch. And the hardware is included.You also get a magnetic dummy plug to protect your vehicle end when not connected. The magnets are powerful enough to stay connected despite the bumps and vibrations common with towing.
If features marine grade wiring, and because of the water tight seal, it's going to be ideal for marine use. Because it's a face to face connection there are no crevices or small gaps that dirt or grime can get in. So it makes them easy to clean.Now you'll want to be sure and use etrialer.com's fit guide to determine which setup is going to be right for you. If you're using a t connector like we are here today, you will retain the use of your factory seven way. Depending on which setup you buy, your trailer end protector may look different.
The easy connector seven ways feature a limited lifetime warranty. Depending on your vehicle rather than the key connector, you may need the vehicle end that replaces your factory seven way. Or if you don't have a factory seven way, you have the option that wires in. All options come with included hardware.And that's going to complete our look at the easy connector magnetic seven way trailer connectors.
Average Customer Rating: 5.0 out of 5 stars (1 Customer Reviews)
Replace the existing 7-way on your vehicle with this socket. Built-in magnet creates tight connection with EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no bent or broken terminals.It was awesome to see how easy it was to install.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.