To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting or splicing required.
Features:
Installation on 2014 and 2015 Toyota Highlander
This custom-fit T-connector plugs into your vehicle's wiring harness. The connection points for the 4-way tow harness and the converter are located underneath the spare tire compartment. Once you've plugged in the converter, locate the "towing fuse" position in your fuse box and insert the included 10-amp fuse.
Installation on 2013 and Earlier Toyota Highlander
This custom-fit T-connector plugs into your vehicle's wiring harness. The connection point for the 4-way tow harness is located behind the driver's-side interior trim panel in your rear cargo area. The converter plugs into the factory wiring harness beneath your dash, on the driver's side. Once you've plugged in the converter, locate the "towing fuse" position in your fuse box and insert the included 10-amp fuse.
Once installation is complete, the 4-way flat connector will be stowed in an out-of-the-way location within your cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. This converter is a powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (97 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting or splicing required.In addition to the wiring kit, I also purchased the tow bar attachment for my Toyota Highlander. I was thrilled with how easy it was to install and the step by step video instructions on your website was exactly what I needed. Everything works perfectly and I was able to pull about 5 tons of stone in one haul which made me very happy. The trailer hitch and wiring has already paid for itself multiple times over in what I would have spent on delivery fees for my patio projects.
Thank you for a great product and a fantastic user experience.
The product was exactly what I needed. However shipping through usps stinks. They were days late and when it came I met the postman who said he didn’t have the package then found it at the bottom of his bag. I guess I might never have seen it.
Product shipped in very Good condition. Installation instructions were very good. Saw the supporting online installations were excellent too. Thank yo
The wiring harness was easy to install. Clear precise written directions were given (which I do read). The trailer lights work every time I tow something. Thank you, thank you!!
Excellent product, easy to install, followed video instructions
Great products! The shop had everything it needed to setup my 2017 Highlander up for towing a camper trailer.
The hitch receiver is working well primarily as a bicycle carrier. It has pulled a light duty trailer well.
Great service!
Not very good instructions included but not too difficult for hubby to install. [online video] was very helpful!
Evelyn
5/17/2023
No problem with the wiring harness
I was nervous about ordering and installing this kit myself, but it really was incredibly easy. I didn't have to do any splicing, it really was just plug and play.
Simple to install and works as advertis ed.
I’m loving this trailer hitch receiver. My 8-yr old some helped me do a self-install on my 2015 Toyota Highlander. The instructions on the retailer website were fantastic, and with a little patience and the right tools, we had no problem installing this ourselves - savings hundreds of dollars!
The hitch and 4 flat wiring kit were great and everything went together easily, I would say it took approx. 40 minutes to install everything including the hitch and the wiring - very easy and straight forward. The videos from e-tailer were very helpful. We used the hitch on our Highlander to pull our boat to the lake this weekend. Everything worked as it should with no issues. I give it 5 stars.
Your shipping company SUCKS!!!! Your service and product was Fantastic. I would really rethink your shipping company. Look at attached photo. My harness was soaked.
Jenny N.
1/4/2022
I will have our customer service team reach out to you.
Purchased wiring harness for my Toyota avalon. The instructions to connect and secure it for long term use were spot on. Great product and Support.
Wiring took 5 minutes to install. Only complaint is with a 2015 highlander you need to buy the “WITHOUT TRAILERING PACKAGE” option even if you have the XLE or above with tow prep package
great place and amazing pricing, i never bother shopping prices anymore I KNOW! theirs is the best foe me...... i will never buy from anywhere else and this is my 4th hitch and wiring kit from them not only for me but for family as well. thank you all!
A little disappointed...did not come with everything. It was missing a fuse, zip ties and the grease...wish the product would say that it wasn't coming with these items. Once I went and got my own fuse I got it to work.
Jenny N.
1/31/2022
I will have our customer service team reach out to you.
Super easy and convenient to install. After removing certain panels in truck, you literally just plug connectors together, install the fuse at front fuse box and you are good to go.
Very easy installation on my Highlander. Easiest install I have ever done. Very heavy duty hitch, at a great price.
This wiring kit was perfect! Easy install in just minutes. If your looking for a wiring kit this is it. Plug & play and fantastic directions.
Everything plug and play and they even include the 20amp fuse with instructions for where it goes! Thanks for a great product and service!
No problems, good product
Worked perfectly, thanks
Originally I had ordered just half the part, but decided to keep it for backup. I needed this one very quickly and got it in three days, which was perfect timing.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
William
6/6/2024
Man I thought I was reviewing a mattress we bought. Oh well. The wireing harness worked great