bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Tekonsha
  3. Custom Fit
  4. Trailer Hitch Wiring
  5. 7 Round - Blade
  6. No Converter
Tow Package Vehicle Wiring Harness with 7-Way Trailer Connector

Tow Package Vehicle Wiring Harness with 7-Way Trailer Connector

Item # 118247
lowest price pledge
Retail:$120.62
Our Price: $69.94
You Save: 42%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 1.46 lbs
Quantity: 
In Stock
118247 - No Converter Tekonsha Trailer Hitch Wiring
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Tow Ready 7-Way Wiring Harness for 2004 Ford F-150 with OEM 4-Flat Trailer Connector. 1-800-940-8924 to order Tekonsha custom fit vehicle wiring part number 118247 or order online at etrailer.com. Free expert support on all Tekonsha products. Guaranteed Lowest Price and Fastest Shipping for Tow Package Vehicle Wiring Harness with 7-Way Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (63)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

Tekonsha Custom Fit Vehicle Wiring - 118247

  • Custom Fit
  • Trailer Hitch Wiring
  • 7 Round - Blade
  • No Converter
  • Tekonsha

Tow Ready 7-Way Wiring Harness for 2004 Ford F-150 with OEM 4-Flat Trailer Connector.


Features:

  • Adds a 7-way to your vehicle while retaining your factory 4-flat
  • Installs in seconds on vehicles with factory 4-pole
  • Connects directly to standard OEM connector
  • Fuses and relays Included


NOTE: Mounting bracket part number PK12711U will work with this harness.

Product Detail



118247 Tow Package Vehicle Wiring Harness with 7-Way Trailer Connector

Installation Details 118247 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Video of Tow Package Vehicle Wiring Harness with 7-Way Trailer Connector

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Trailer Wiring Harness Installation - 2004 Ford F-150

All right. Today on this 2004 Ford F150 were going to install part number 118247. First thing we need to do is go ahead and unload our spare tire and get it out of our way. This way we have access to the wiring connection we need. Now, the wiring connection were looking for is going to be on the drivers side frame rail pointed out here, and well go ahead and disconnect it. Well push down on the tab and pull it apart.

Next, we need to remove the ground screw. Well go ahead and remove it. Now we can go ahead and start installing the new part. Now the wire harness is shaped like a T so well take both halves of the T and install them into the wire harness; one on each side. Well push them together until they click.

All right, now well take our white wire at the ring terminal and add that to the original wire with the ring terminal and bolt those two back together to the frame using the ground screw. Now we need to install a seven pole connector. Now, this kit does not come with any brackets to hold the seven pole in place. So, were going to add a couple of part numbers. Were going to use part number pk12711u to hold our seven pole bracket.

Were going to use part number 18136 to mount the whole assembly to the hitch. Well start off by putting the two brackets together. Now, were going to intentionally take one bracket and install it in reverse fashion that way we keep the seven pole connector as close to the hitch as possible. Well bolt these two together and then well take that assembly and well go ahead and clamp it to the hitch. Well take the band clamp, run it around the hitch and through the bracket and then tighten it down.

Well make sure its level first and then well tighten it down for good. Now well go ahead and take our wire harness and run it through the bracket. Well remove the little gray lock thats on top then install the seven pole connector. It also just snaps together. And, then well reinstall the lock. And, then our seven pole connector will get bolted to the seven pole bracket. All right. Were done with the back of the vehicle. Now we need to add a relay to the front. Well go to the passenger side front seat and there will be a kick panel down below that we have to remove to get access to the fuse panel. Well remove the door and then remove the lid to the panel. Then well go ahead and add our relay that comes with the kit. This will power our 12 volt power supply with our hot lead going out back at the seven pole connector. Now, you want to check your owners manual for proper location of this circuit, and then reinstall the covers. That will finish it for our install of part number 118247 on our 2004 Ford F150.


Customer Reviews

Tow Package Vehicle Wiring Harness with 7-Way Trailer Connector - 118247

Average Customer Rating:  4.6 out of 5 stars   (63 Customer Reviews)

Tow Ready 7-Way Wiring Harness for 2004 Ford F-150 with OEM 4-Flat Trailer Connector.

by:

This package deal was just what I was looking for. The easy to install t connector was a quick plug in and I was on my way. With just a few self tapping screws I was able to mount the connector to my bumper and I was on my way. After installation I hooked up our new camper and every thing worked as it should first time. This is a great set up for someone looking to save time and have a professional looking install in minutes. Thanks Etrailer




by:
2004 Ford F-150

The harness assembly works well and meets the performance described on the website. Unfortunately, the plastic housing that mates with the factory wiring on the truck didn't withstand the initial installation. The small barb molded into the housing that locks into the vehicle wiring snapped off during the first install. I had to add tape & heat shrink to the assembly to ensure that it wouldn't vibrate out during travel. Also the 7-way plug-in assembly doesn't fully lock into the wiring harness and has come loose 2x during travel. I've had great success with other etrailer products and will use them again. Hopefully, these parts will be improved.




by:

I recently purchased a pontoon boat that had hydraulic brakes. First time out had to back up the trailer uphill, not a good experience with the brakes locking up. My F150 has only factory 4 pin trailer connections so I looked for a 5 pin option with reverse brake override power. Etrailer is my first stop on trailer parts. The wiring harness and relay in the kit fit perfectly, but needed a large adjustable pliers to snap to the connectors together on one connector. Had to fabricate a bracket as the overall length of the 7 pin receptacle and connector means it had to be set 2” towards the bumper to clear the hitch assembly (also e-trailer). A few tie wraps later everything was done and tested. Instructions were good, but didn’t need to drop the spare to get at everything. Would recommend.




by:
2004 Ford F-150

Easy install and worked as designed.


Comments
As expected. Quick shipping. Very satisfied.
Michael - 05/23/2022


by:
2004 Ford F-150

Was having trouble finding the proper wiring harness package for my 2004 F150 pickup that provided trailer brakes. I received very quick and professional help with locating exactly the tow package I needed and having it shipped promptly to me.


Comments
product is working fine just as it was designed.
tommy f - 08/28/2020


by:
2004 Ford F-150

I have just got around to installing the wire harness and it is not the correct one. I had to order it from the dealer.
It was the 4L3Z 13A576 BA.
I think you part finder might be wrong on this one.


Comments
The 2004 Ford F150 was a split model year. Ford actually sold two different vehicles as a 2004 F150, the 2004 F150 and the 2004 F150 Heritage. The Heritage was identical to the 2003 model, while the 2004 F150 used the new body style. The different trucks used different part number trailer connectors, the Heritage used # 118242 and the F150 used # 118247.
-- Etrailer Expert Mike L - 02/06/2019


by:

I am very pleased with the wiring kit I had purchased from your company. The instruction were complete and the shipping couldn't have been quicker. The plug in harness fit my truck and was very easy to install. I have only one suggestion, and it is a minor one at that. The kit does not contain a mounting bracket for the vehicle plug itself, so a little time was spent fabricating one to mount the plug. Again this is a minor suggestion and will not keep me from visiting your website and/or making any purchases in the future. Thanks for a great product !!! Tony


Comments
Still have the trailer product on my truck. Rebuilding a second trailer right now for bigger equipment.Thanks again, have a great day,
Tony J - 07/27/2015



by:
2004 Ford F-150

I have a 2004 f150, (not a heritage).
I
ordered the wire harness and bracket to mont.
Guess what?
The harness does not plug into the 4 way.
There are two connections. The main 7 way connection plugs in but the 4 way connection on the harness does not fit the truck's 4 way.
O, the mounting bracket that is recommended for this harness also does not worked at all.
Only one hole in the mounting bracket lines up.
Total waste!


Comments
The wiring harness actually plugs inline at the point where the factory 4-pole trailer connector plugs into the vehicles wiring harness on the drivers side frame member on the drivers side frame rail. Follow the factory 4-pole from the bumper until the connector is found. Unplug that connection plug the # 118247 inline.
-- Etrailer Expert Mike L - 04/26/2018


by:

Will allow correct hookup of trailer wi ring




by:
2004 Ford F-150

I am very pleased with the order I made from etrailer. Etrailer was fast and easy. Receive my order on time. I also like the fact that they had a video showing how to install product.




by:

Perfect fit and easy to install




by:
2004 Ford F-150

Well I suppose if you are mounting the 7-pin to your bumper this is a 5-star product. The only reason I'm giving it 4-stars is because I wanted to mount the 7-pin in my truck bed for a 5th wheel (2004 Ford F-150).

I knew when I purchased this item that the cabling for the 7-pin would not be long enough to do this. I had to cut this portion of the cable and extend all 7 wires about 2 feet, then re-wrap the cabling. Once this was done, it's a perfect product for in-bed mounting.

One CAN purchase an extension for the 7-pin but it's $43 as I recall. I URGE etrailer to create this exact setup with a longer 7-pin for applications such as mine. I can't possibly be the only one doing this.

Other than that, great product, great service, no issues at all.




by:
2004 Ford F-150

I have not installed the product yet. The wiring harness , connectors and instructions seem to make the brake wiring job I need to do very easy. It will turn a difficult job into a easier project than I thought.




by:

I looked and asked around everywhere for a seven pin plug. People wanted to charge me a couple hundred bucks to install it. I saw this video on youtube and went to the website and ordered it on the spot. Easy to install. Took five minutes. I wish it would have came with mounting bracket, but other than that, AWESOME!!!!! Definitely recomend this sight!




by:

This is exactly what I needed and couldn't find it any where in my local area, not even at a trailer dealer. The product was very easy to install and worked as expected without complications of any kind. I love the product and was glad that it's what was needed to make the transition. The web site video provided adequate information pertaining to the product and how to install it with ease. Thank You!




by:
2004 Ford F-150

The mount braket for the 7 way pin was not the correct size for the 7 way plug, I had to drill one hole just to get two screws in it.
The mounting braket with the clap, well the screw fell out of the clamp and I could not figure out how to put in back in and make it work.




by:
2004 Ford F-150

I installed the items I orderd on a 2004 Ford F150 without factory trailer package.
The items etrailer.com suggested to buy fit perfect and work perfect. They were easy to install considering the truck is 8 years old. Some rust to deal with.
I would give etrailer.com two thumbs up.




by:

I didn't install it, but ordered exactly what my mechanic needed. Installed at the shop in a couple of hours and pulled my new rv home the next day. All lights are a go, brakes work great.




by:
2004 Ford F-150

Easy to install. Everything just snapped right in. Used the hole on the bumper under the black plastic to mount the 7-blade plug.




by:
2004 Ford F-150

Great video directions. Easy to install. Clipped right into the existing truck wiring and the 4 prong dealer installed plug still functions.




by:
2004 Ford F-150

wiring was exact fit but the brackets you have to buy to mount it none of the holes line up!!!!!




by:
2004 Ford F-150

The product was very easy to install and works great! It was easy to find on etrailer.com, shipped the same day and made it to me faster than I expected after my free shipping upgrade. Thanks etrailer.com and I will use you again in the future!




by:
2004 Ford F-150

Harness was easy to install and was plug and play. 4 stars because the screws and bolts were not salt water worthy. They rusted out and had to be replaced.




by:

7 way tow harness 118247What a great experience dealing with Etrailer on this purchase. The actual transaction went smoothly and follow up communication from Etrailer staff was exceptional. I was immediately informed of receipt of my order, when my package was shipped, and receive a follow up message within hours of it's delivery. Their staff deserves a A+ for this transaction and I'll be back when and if I need something else.




by:
2004 Ford F-150

The product I bought through your company was very good products, everything work as they describe it and easy installation as they said it would be.even after the sale they still continued to help us. I would recommend this company to other people and will order again from this company. Excellent job!!!!



25
63
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring



  • Troubleshooting Trailer Brake Controller Reading No Trailer Connected with a Trailer Connected
    My first instinct is that there is a ground problem on the trailer side. Even if a new trailer plug was installed, if it was connected to the same wiring the ground could still be faulty. I would double check that connection. On a trailer, the ground should be attached to a non-painted, clean and corrosion free bare metal surface. Make sure that the ground wire is not damaged from the connector to where it is attached to the frame. Since you have not had a problem until recently and it...
    view full answer...
  • Trailer Connector for 2004 Ford F150 with no Tow Package
    Although not all 2004 F150 models were equipped with the 4-pole connector, the Tow Package wiring harness you referenced, part # 118247 will still work with those with no trailer connector. The connector that the harness plugs into is located under the vehicle, along the drivers side frame rail behind the back bumper. To see the install instructions, click on the provided link.
    view full answer...
  • Installing The 7 Pin Wiring Adapter For 2006 Ford F-150
    On your 2006 Ford F-150, there should be an OEM connector that can clip right in. The Tow Package Vehicle Wiring Harness with 7-Way Trailer Connector # 118247 is the 7 way adapter you are looking for. I've attached a help article to assist in the installation and have attached a video.
    view full answer...
  • Replacement 7-Way Harness for 2004 Ford F-150 Solution
    If the clips of the harness you damaged are on the harnesses of the part # 118247 then yes you could use this part number as a way to replace them.
    view full answer...
  • Where is 7-Way Trailer Wiring Connector on 2004 Ford F150
    We had the chance to install the Tekonsha 7-way kit part # 118247 on a 2004 Ford F-150 and we did find the correct connector. It's possible maybe you are trying to use the wrong connector. Try checking out the attached install video link to verify.
    view full answer...
  • Adding a 7-Way Trailer Connector to a 2010 Ford F-150 with Factory 4-Way
    To add a 7-Way trailer connector to your 2010 Ford F-150 with a factory 4-Way you will need # 37185. This is a partial hardwire installation but on your truck it will be easy. I have linked a video that should help. Go to about the 10 minute, 50 second mark and forward to see the process of accessing the additional wires to make the 7-Way fully functional.
    view full answer...
  • Converting a 4-way to a 7-way on a 2005 Ford F-150
    You are correct, the wiring you found on your 2005 Ford F-150 is as you suspected. The blue wire is for the brake controller output and the orange wire is the auxiliary 12 volt power supply. You could use the 12 volt aux as a circuit to maintain the charge on your trailer or basically run anything else that runs on a 12 volt system such as lights. Check out the FAQ and picture I attached also. For a 7-way I would recommend you get something like a Adapter 4 Pole to 7 Pole Vehicle End...
    view full answer...
    Image 1 for Image 2 for
  • Will Tow Package Vehicle Wiring Harness 118247 Work on a 2005 Ford F-150 XL?
    Unfortunately, the part number you mention will not work with the 2005 F150. You'll have to use the 4 Pole to 7 Pole Adapter. Plug the existing 4-way into the adapter and attach the blue, black, and purple wires to the wires going into the connector on the driver's side frame rail. We have a Ford truck installation guide that shows how this is accomplished. I'll include a link below.
    view full answer...
  • How to Wire a 7-Way connector on New and Old Body Style 2004 Ford F-150
    The way to tell if your truck is a new body style or a heritage model (old body style) is to check for the wiring harness at the rear of the vehicle on the driver side frame rail. you may have to lower the spare tire to see the harness if it is present. If your truck is the New body style then you will need the Tow Package Vehicle Wiring Harness with 7-Way Trailer Connector, part number 118247, to wire a 7-way connector on your pickup. You will be able to find the wiring harness on the...
    view full answer...
  • Adding a Functional 7-Way with Reverse Light Circuit to a 2004 Ford F-150
    If your 2004 Ford F-150 has a factory installed 4-Way trailer connector and you install 7-Way # 118247 and its relay (and all of the other tow package fuses/relays are in place) then you will have a fully functional 7-Way connector and the reverse light circuit will be active. This will then activate the reverse lockout solenoid that is on the boat trailer so the brakes won't engage when in reverse.
    view full answer...
  • Will Tekonsha Wiring for 2004 Ford F-150 Provide Power to 7-Way and 4-Way
    The Tekonsha # 118247 doesn't have a 4-Way connector but if you swapped out the 7-Way for something like part # 30955 then yes, the Tekonsha wring would provide power to both the 7-Way and the 4-Way for your 2004 Ford F-150. Basically as long as the 4-Way is connected after the Tekonsha wiring then it will receive power. Attached is an installation video of this kit on a 2004 F-150 for you to check out.
    view full answer...
  • How To Convert a 4-Way to a 7-Way On a 2001 Ford Expedition
    I do have an option for you but the Tow Package Vehicle Wiring Harness with 7-Way Trailer Connector part # 118247 won't fit a 2001 Ford Expedition as the pins are not in the correct positions. Instead, you will need to use the Adapter 4-Pole to 7-Pole and 4-Pole part # 37185. The orange and blue wires in the attached photo will need to be cut and then ran to the black and blue wires on the adapter (blue to blue, black to orange). The two 4-ways will then plug into one another and you need...
    view full answer...
    Image 1 for
  • Adding a 7-Way Trailer Connector to a 2005 Ford Expedition with Factory 4-Way
    There isn't a harness similar to # 118247 that fits your 2005 Ford Expedition with 4-Way connector but I do have a solution that will allow you to add a 7-Way fairly easily and retain the use of the 4-Way as well. You will need connector # 37185. The 4-Way you have will plug into this adapter. The white wire grounds to the vehicle frame. The other wires will connect to tow package wiring under the vehicle. Follow your 4-Way forward under the vehicle to where it connects to another harness....
    view full answer...
  • Parts Needed to Install a Brake Controller on a 2012 Ford F-150
    If you have a factory 7-way all you will need to install a Tekonsha brake controller would be a Tow Ready Plug-In Wiring Adapter # 22292 that you referenced. If you have a 4-way you will also need a Tow Package Vehicle Wiring Harness # 118247. This product comes with all the fuses and relays that you would need to activate the 7-way also. The truck computer should not have to be updated either for one of our controllers to work on your vehicle. If you are looking for a brake controller...
    view full answer...
  • Brake Controller Wiring Harness for 2006 Ford F-150 and Primus IQ Brake Controller
    For a 2006 Ford F-150 and Primus brake controller you will need wiring harness # 3035-P. I have included a link to a video showing where to plug in the brake controller on your truck.
    view full answer...
  • Wiring Brake Controller on 2004 Ford F150
    For a 2004 Ford F150, you would need the # 3035P Brake Controller Wiring Adapter that you referenced. The larger end of the connector would plug in under the dash, and the other end would connect to the Prodigy P2 that you mentioned. The 4-pole flat or 7-way refers to the trailer connector on the bumper of the truck. A trailer that is equipped with electric brakes typically uses a 6 or a 7-way trailer connector. If your truck already has the 7-way, all you should need to do is install...
    view full answer...
  • Will The Tow Package Vehicle Wiring Harness with 7-Way Trailer Connector Fit My 2005 Ford F-150
    The Tow Package Vehicle Wiring Harness with 7-Way Trailer Connector for the 2004 F-150, item # 118247, will not work on the 2005 model year Ford F-150. There was a were changes for the 2005 model year and the wiring package was changed on the Ford Trucks. To wire your vehicle for a 7-way connector you will need a 4-way connector first. If your truck has a factory 4- way connector then you will be able to use our Adapter 4 Pole to 7 Pole and 4 Pole, item # 37185, and splice into the vehicle...
    view full answer...
  • Plug In Adapter Recommendation to Install a Brake Controller in a 2009 Ford F-150
    It sounds like you are looking for a plug-in adapter for your 2009 Ford F150 to let you install a brake controller. If you had a Tekonsha brake controller like the P2 Brake controller part # 90885 you would want the Tow Ready Plug-In Wiring Adapter # 22292. The brake controller we recommend the most is the Prodigy P2 Brake Controller part # 90885. This is the best selling controller on the market because of how easy it is to setup and use, and how well it works.
    view full answer...
  • Upgrading From A 4-pole to 7-pole Connector On A 2006 F150 Installation
    I do have a solution to convert your 4-way connector to a 7-way but first I checked with the manufacturer directly and they confirmed the Tow Package Vehicle Wiring Harness with 7-Way Trailer Connector # 118247 is not compatible with 2006 Ford F150. I recommend instead the Universal Installation Kit for Trailer Brake Controller # ETBC7 as your easiest way to go from a 4-way to 7-way connector because it includes all the wiring to make it fully functional. This kit is designed specifically...
    view full answer...
  • Replacement Wiring Harness for 2005 Ford F-150 with Factory 4-Pole Trailer Connector
    Thank you for the photo! The Curt T-Connector # C56031 you purchased is the correct replacement wiring harness for your 2005 Ford F-150 without a factory 7-pole connector (only a 4-pole) regardless of the style of connector on the factory harness. The Curt T-Connector # C56031 will actually connect directly into your vehicle taillight wiring harness (bypassing the tow package harness). This harness will have the same connector end as the # C56031. The most common location is underneath...
    view full answer...
    Image 1 for
  • Replacement Trailer Wiring Harness for a 2004 Ford F-150 new Body Style
    Yes, the Tow Randy replacement vehicle wiring harness # 118247 is the correct harness for a 2004 Ford F-150 new body style. I have included a link to the installation instructions for you to view. You may also need a mounting bracket like # PK12711U.
    view full answer...
  • Trailer Brake Controller Recommendation for a 2004 Ford F-150 with Factory Tow Package
    For your 2004 Ford F-150 with the factory tow package, if the tow package included a 7-Way trailer wiring harness you will just need a brake controller and the appropriate adapter for your truck. For a brake controller I recommend the P2, # 90885. It is reliable, easy to set up, and easy to use. I have linked the installation details for you. For a wiring harness you will need # 3035-P. I have included links to the instructions and an installation video of this harness for you. If your...
    view full answer...
  • Brake Controller Recommendation and Install for a 2004 Ford F-150
    From the pictures you submitted it looks like you bought a 7-way adapter and an isolation solenoid to install your Prodigy P2 # 90885. The solenoid is not something we normally recommend for people unless they need the 12 volt power circuit of the 7-way to turn off when the vehicle engine turns off. All you would have needed to install the brake controller in your 2004 Ford F-150 is the part # 3035-P. If you only happen to have a 4-way trailer wiring harness you would also need the part...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Wiring Harness for 2009 Honda CR-V
    We offer the Tow Ready T-1 Harness, part # 118247 for your CR-V. This part is similar to the Curt T Adapter. If your trailer has standard lighting drawing no more than 9.2 amps, the T-1 harness will work just fine for you. When you start adding side marker lights or clearance lights that add up to exceed that 9.2 amp figure, then you will want to go with a hardwired modulite converter like part # 119190KIT. The modulite wires directly into the tail light circuits as well as drawing its...
    view full answer...


< Previous



Do you have a question about this Custom Fit Vehicle Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality custom fit vehicle wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Andrew K
Video by:
Andrew K
Employee Joshua S
Video Edited:
Joshua S
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924