bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Tekonsha
  3. Custom Fit
  4. Trailer Hitch Wiring
  5. 4 Flat
  6. Powered Converter
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118349
lowest price pledge
Retail:$100.51
Our Price: $62.75
You Save: 38%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 1.66 lbs
Quantity: 
Tekonsha Custom Fit Vehicle Wiring - 118349
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system. 1-800-496-5010 to order Tekonsha custom fit vehicle wiring part number 118349 or order online at etrailer.com. Free expert support on all Tekonsha products. Guaranteed Lowest Price and Fastest Shipping for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (114)
  • Q & A (0)
  • Photos
  • Why etrailer?

Tekonsha Custom Fit Vehicle Wiring - 118349

  • Custom Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • Powered Converter
  • Tekonsha

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily
    • Locate connection points in rear cargo area
    • Plug in T-connector
    • Run hot lead to car battery
  • Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
    • Powered module connects directly to battery to avoid overloading vehicle's electrical system
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage:
    • Stop/turn lights: 2.1 amps per circuit
    • Tail lights: 4 amps per circuit
  • 1-Year limited warranty


Note: Early production models built before April 1994 require wiring harness 46255, if built March 1994 or beyond, 118349 is correct.


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side interior trim panels in your rear cargo area. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.


Once installation is complete, the 4-way flat connector will be stowed in an out-of-the-way location within your cargo area.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.


ModuLite Powered Tail Light Converter

A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.


With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.


T-One Installation

T-One Installation

T-One Installation

T-One Installation


118349 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite

Installation Details 118349 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118349

Average Customer Rating:  4.8 out of 5 stars   (114 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.

by:

Flawless fit. Running led trailer light and the power adapter keeps a normal blinker timing.




by:

I have bought three trailer light kits from etrailer,have had a excellent experience with the company, friendly and helpful people ,




by:

Fast service, correct product sent, and very helpful and knowledgeable staff. Thanks for your great service. I got my product in the time you said and I found it was easy to install and everything fit as described.. I am attaching some pics of the installation process.Thanks again.


Comments
The towing lite kit works great. Was a perfect fit for my jeep and easy to install!!! Thanks.
Robbin S - 12/24/2014
Still working perfect after a year, Thank you Etrailer for a great product and easy to install. I use the harness with several different trailers and all is well. Thanks
Robbin S - 12/24/2014


by:
1997 Jeep Grand Cherokee

i looked your product over and i am convinced that it is a good one. i looked into this installation from many sources and found yours to be the most adapt one. installation of your product makes a very secure one. i will not leave the plug inside the automobile but will find a mounting place close to the hitch itself.


Comments
excellent, just right
Larry - 03/11/2019


by:
1997 Jeep Grand Cherokee

Just wanted everyone to know about the wiring harness that I purchased a year ago. It was exactly what I needed. I have a 1997 Jeep Grand Cherokee that I bought used. It had some jury-rigged wiring in it from a previous owner that didn't work correctly. The installation instructions with this were great. Just in case, I also looked at a you tube installation video to help. This wiring harness plugged right into the back light sockets and worked great from day one. It still works fine to this day. Turn signals, brake lights, and emergency blinkers are all working on the trailer. There are many choices out there. If your vehicle has trailer wiring problems, I would highly recommend this harness. Plus shipping was fast with no problems! Great company!




by:
1997 Jeep Grand Cherokee

I ordered this converter for my 97 Jeep Grand Cherokee. After a 2-3 minute read of the instructions I proceeded to access the tailight plugs on my vehicle. You will need to remove the spare tire and open up both left and right side panels in the rear of the vehicle to gain access to the rear lights harness. After that it was simply unplug the existing connectors, plug in the adapter, route your wires under the tailgait cover panel, connect a power wire to a battery source and reassemble. Easy to do. Took me about 20 minutes and I was done. The Etrailer adapter kit was litterally plug and play. Works great. I am satisfied with my purchase and would recommend to anyone.




by:
1997 Jeep Grand Cherokee

When I decided to install a trailer hitch and trailer light wiring harness on my 21 year old Jeep Grand Cherokee I was dreading splicing all the wires. After watching your how to video I ordered the harness from etrailer.com. It was a very simple installation. There was no wire cutting not taping required. I did have to route one wire from the back of the jeep to the positive battery post which was quite simple. An inline fuse holder and fuse were included with the kit. I will recommend etrailer to my friends.




by:
1995 Jeep Grand Cherokee

Very Good design and relatively easy to install. Works as described, was very impressed that my vehicle wiring harness was spared after the rental trailer I hooked up to deteroiating wiring shorted out. Since I prefer to run wiring along established safe routes within the vehicle (instead of as suggested in the installation instructions and video) an extra 2ft of primary lead wire and and extra foot in the right side signal harness would have been beneficial andf appreciated.




by:
1995 Jeep Grand Cherokee

Great Product. Detailed and accurate instructions. etrailer got my order right the first time, which is something another company could not get right, twice. Item arrive 1 day ahead of date originally scheduled to arrive. I am very pleased with this product and etrailer as a whole.


Comments
It worked great when I sold the vehicle in November.
Mike S - 05/26/2015


by:
Jeep Grand Cherokee

Works just fine. Follow the instructions, you do need to run a positive wire directly to a reliable source (battery) and use a dependable groung as well. (frame)

Rather easy to install, takes about 45 minutes to an hour to install if you do it right.

I've been pulling my 16' tracker with my Jeep Grand Cherokee without any issues, incliding the rapid fire blinker you get on occasion when the blinker circuit relay isn't strong enough to absorb the extra draw a trailer creates.




by:
1996 Jeep Grand Cherokee

Installation of this product was very easy, probably took me about 30 minutes. I would recommend watching the instructional YouTube video prior to beginning the installation as the instructions included with the product are a little vague if you're not a mechanic. The video provided by etrailer provides excellent visual instructions of how to locate the wiring connectors and how to run all wires and connectors.
Overall, excellent product.




by:
1996 Jeep Grand Cherokee

Installed wiring harness on 1996 Grand Cherokee, it was very easy to do. I tucked the 4 flat back inside the little compartment behind the spare tire and will run it under the lift gate when I need it. Also have not run wire to the battery yet I use a second battery that sets in the back to power the unit. Works great.




by:
1995 Jeep Grand Cherokee

I bought this harness for my 95 jeep. Very easy to install, just plug and play. The hardest part was running the wire along the undercarriage, and attaching it. The kit was all heavy duty, and well made, the one thing I would change is the tiny zip ties to use in attaching the wire to the undercarriage. I used some foot long ties that I had on hand which worked fine.




by:
1996 Jeep Cherokee

This wiring harness fit my 1996 jeep Cherokee perfectly, it took me about an hour to install it, I'm very mechanical but by no means a mechanic! It shipped fast and works very well, two thumbs up to E Trailer.




by:

I am installing this harness this weekend so I cannot give a product review yet, but would like to praise Etrailer's service. Email confirmations were immediate and shipping was prompt! I recieved the harness within 3 days after placing my order! The price (with shipping) was much better than my local RV or auto parts store. This is my second purchase from Etrailer and I'm a satified customer!




by:
1996 Jeep Grand Cherokee

Great overall experience. My 1996 Jeep Grand Cherokee's taillight wiring was a hot mess. Splice city! I was able to install this unit in under an hour and it works like a charm. The installation pictures on etrailers website were extremely helpful. I got more than I paid for...peace of mind. Giddy up!




by:
1996 Jeep Grand Cherokee

Installed this on my 1996 Jeep Grand Cherokee.
Install
was straight forward with easy plug in style connectors.
Only a few panels to remove and reinstall.
Easy connection to battery.
I have used this many times successfully.
Would recommend to any one with a similarly equipped Jeep.




by:
1997 Jeep Grand Cherokee

Called etrailer.com at noon on Thursday in a bind and needing a wiring harness for my 1997 Jeep Grand Cherokee. With the assistance of the sales woman I placed an order and requested over night shipping. I received a package by noon the next day!!! Hooked up the wiring harness and it worked great!! Just in time for my weekend camping trip with my pop-up camper.




by:

Courteous service, fast delivery. Taillight converter works great.


Comments
No problems so far. Works hreat
Pete E - 08/07/2015


by:

Review would have been excellent except the primary wire from the battery in the right front to the trailer connection area in the left rear was barely long enough. I had to try 3 different routings to get one that would make it.

Instructions were clear and the videos were a real help. Service also outstanding.




by:

Unbelievable how easy this harness installed. My son and I had it done in less than 2 hours including running the hot wire from the battery. Everything came with this kit that you will need for the installation. AAAA++++++ etrailer you built a great kit. I highly recommend. Oh and it worked perfectly when we hooked up the trailer, no glitches, no fiddling. perfect!!




by:
1996 Jeep Grand Cherokee

the harness was easy to hook up.the t connector is the key. no trying to tap into wiring harness, just plug in.. Then run a small wire from the battery to the harness and hook up a ground wire to frame and you are good to go.




by:

The trailer wiring harness arrived within a few days of ordering and installed in minutes and is working fine.. Everything I needed to make the harness connection was included and I am very happy with the whole ordering process.. thank you




by:
1997 Jeep Grand Cherokee

Awesome wiring harness, No splicing into the main wiring of the vehicle. Plug and play. Only splice is power wire which is easy and quick. Took me 15 minutes max. to install. I highly recommend this product and Company. Thanks Folks.

Cliff




by:

Fantastic assistance from staff (Thanks to Tamara W.)

Figured out my order and processed immediately. Boxed right, shipped timely, received VERY fast.

Great place to shop.


Comments
Installed easily, in service regularly either connecting trailers or my wifes handicap chair lift.
Charlie - 01/15/2018

25
114
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring



  • Can I wire the Trailer Connector Directly Into Taillight Circuits on my 1995 Jeep Grand Cherokee?
    If you were to wire your connector directly into the taillight circuits, your trailer lights would not work properly. Your Grand Cherokee uses separate circuits to carry the turn signals and the brake lights. However, your trailer combines both these signals onto one circuit. The converter, part number 118349 is needed to convert the separate signals from the vehicle into the combined signals that the trailer can use. The modulite with the separate battery feed is needed to protect the...
    view full answer...
  • Will the Aftermarket Wire Harness Cause My Lamp Outage Sensor to Come On
    Yes, the T-One Wiring Harness, item # 118349, will allow your vehicle lighting to function as normal and will not cause a problem with your lamp outage sensor. The modulite converter on the wiring harness gets the power from the battery to illuminate the trailer lights. Your lamp outage sensor comes on when it senses a draw or lack of it on the lighting system, so the modulite bypasses this sensor and only uses the vehicles circuits as switches to tell the modulite when to turn on the...
    view full answer...
  • Do Converter Boxes on Trailer Wiring Harnesses Ever Go Bad
    Converter boxes like what is on the Tow Ready Wiring Harness # 118349 can short out. Actually if there's a short on the trailer wiring they tend to short out pretty frequently. If you tested the input side of the box and the voltage is there when it is supposed to be, but on the output side of the box the voltage isn't there then it has shorted out and would need to be replaced. I attached an FAQ on troubleshooting 4-ways for you to check out also.
    view full answer...
  • Installation of 4-Way Connector on 1998 Jeep Grand Cherokee
    To get a 4-Way connector at the rear of your 1998 Jeep Grand Cherokee you will need to install the Tow Ready T-One Wiring Harness, part # 118349. This wiring harness will connect inline to the plugs located behind the Jeeps tail lights. A separate power wire needs to be run to the positive post of the vehicles battery using the included in-line fuse holder. Also, the separate white (ground) wire will need to be attached to a good, clean ground. I am including links to instructions and...
    view full answer...
  • How to Install Trailer Wiring in a 1998 Jeep Grand Cherokee without Interior Access Panel
    We had another customer with a 1998 Jeep Grand Cherokee who had the same issue as you. When they went to install the Tow Ready Wiring Harness part # 118349 they discovered that they did not have the access panel. They ended up having to remove the interior panels, but still were able to install the wiring harness like the install instructions with that being the only difference.
    view full answer...
  • Trailer Wiring Harness Recommendation for 1995 Jeep Grand Cherokee
    For your 1995 Jeep Grand Cherokee we have the T-One Trailer wiring harness part # 118349 which is a confirmed fit and would install by plugging in line with the taillight harnesses of your vehicle.
    view full answer...
  • How to Use 4-Pole Trailer Connector # 118349 Once Installed on 1998 Jeep Grand Cherokee
    Once installed, the 4-pole trailer connector would be stored in the cargo are of your Grand Cherokee. When needed, open the hatch and pull out enough of the connector and wiring to reach the connector on the trailer. Then, you can close the hatch on the wire. The rubber weather stripping around the hatch is plenty thick enough to cushion the wire and prevent it from being damaged, as long as you keep the wire well away from the latch. When you are finished using the connector, simply coil...
    view full answer...
  • Removing Old Uhaul Wiring Before Installing New Wiring Harness on a 1995 Jeep Grand Cherokee
    Yes, you will definitely want to remove all old wiring that uhaul installed in your 1995 Jeep Grand Cherokee. The Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118349 should work just fine after that.
    view full answer...
  • Factory Wiring Harness that Does Not Work on a 1997 Jeep Grand Cherokee
    If you have tested the trailer connector with a circuit tester like part # 40376, and determined that the harness not working has nothing to do with a blown fuse, then you will want to replace the converter unit. We have a T-1 Connector, part # 118349, that is specifically designed for your vehicle. The unit draws its 12V power directly from the vehicle battery, instead of drawing it through the vehicle lighting circuits. Installation is a snap, with no cutting or splicing required.
    view full answer...
  • How do I Find Out if my 98 Jeep Grand Cherokee Came with the Factory Tow Package?
    In most cases you'll be able to tell whether or not your Jeep has the factory tow package because it came with an unbranded (no manufacturer) hitch and a wiring harness installed on the rear of the vehicle. Even if those two things aren't true, it doesn't mean that at one point they were not attached. The most accurate way to determine the factory build on your Jeep is using the Jeep website and putting in your VIN to get the exact build sheet for your 1998 Jeep Grand Cherokee. If you...
    view full answer...
  • Trailer Wiring Harness # 118349 Not Fitting a 1994 Jeep Grand Cherokee Laredo
    Your 1994 Jeep Grand Cherokee must have been built before April of the model year production. You would need wiring harness # 46255 for the early 1994 models instead of # 118349 which is for models built after March. This issue has happened enough that we added tech tips and notes in the fit guide for the 1994 Jeep Grand Cherokee.
    view full answer...
  • Installing 4-Way Trailer Connector on a 1997 Jeep Grand Cherokee
    Vehicle manufacturers don't always (Hardly ever) use the standard green, yellow, white, brown wire coloring we're familiar with. So you have to connect the harness by function. Use a circuit tester, like our # 40376, to test the wiring on the Jeep to determine each ones function. Then wire it as follows: Green - Right turn signal Yellow - Left turn signal White - Ground to the Jeep's frame Brown - Running lights If you'd rather use the custom wiring harness for the Grand Cherokee I...
    view full answer...
  • Troubleshooting Flashing Trailer Lights with 2013 BMW 5 Series
    The first thing I recommend you do is disconnect your trailer. Then you will need a circuit tester, like # 40376, to test the wires leading into the converter box for your T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, # 118349. Next run through all the functions of the vehicle (left/right turn signals, brake lights, and running lights) while testing the wires. If the signals are not correct going in there that indicates a problem with the vehicle wiring that will need...
    view full answer...
  • Wiring Harness Recommendation for a 1998 Jeep Grand Cherokee without Factory Towing Package
    In regards to your 1998 Jeep Grand Cherokee both Curt T-Connector vehicle wiring # C55349 and T-One Wiring Harness # 118349 are very similar. They both receive great customer reviews. I would recommend Tow Ready Custom Fit Vehicle Wiring # 118349 as it is the more popular one as well. This wiring harness will connect inline to the plugs located behind the Jeeps tail lights. A separate power wire needs to be run to the positive post of the vehicles battery using the included in-line fuse...
    view full answer...
  • Where Does a Trailer Wiring Harness Plug In on a 1997 Jeep Grand Cherokee
    Curt trailer wiring harness # C55260 is designed for models of the 1997 Jeep Grand Cherokee that came with a factory tow package. If that connector is no where to be found then that likely indicates that the vehicle does not have the factory tow package and you will need a different wiring harness, # 118349, which plugs in line with the vehicle tail light wiring.
    view full answer...
  • Cant Find All of the Connection to Install Curt Trailer Wiring Harness on 1996 Jeep Grand Cherokee
    The Curt trailer wiring harness # C55260 is designed for models of the 1996 Jeep Grand Cherokee that came with the factory tow package. It is possible that yours does not have the factory tow package so not all of the wiring is present. If you have searched and cannot find that connector anywhere then that is likely what is going on. So instead of harness # C55260 you would need a different harness, # 118349. I have included a link to a video review of this harness for you.
    view full answer...
  • Trailer Tail Lights Come On for a Few Seconds then Shut Off with a 1996 Jeep Grand Cherokee
    There could be a few reasons why this is happening. The first thing I want you to do is go ahead and disconnect the trailer. Then use a circuit tester, like # PTW2979 if needed, to test the wires leading into the converter box for harness # 118349. Run through all the functions of the vehicle (left/right turn signals, brake lights, and running lights) while testing the wires. If the signals are not correct going in there that indicates a problem with the vehicle wiring that will need to...
    view full answer...
  • Can A Universal Splice In 4-Way Connector Be Used On A 1995 Jeep Grand Cherokee?
    There sure is! For a splice in kit you can use the Universal Upgraded Modulite Vehicle Wiring Harness Kit w/ 4-Pole Trailer Connector and Installation Kit # 119147KIT which includes everything needed to splice into the factory wiring on your 1995 Jeep Grand Cherokee Laredo without the factory towing package. With that said there are plug in play harness like the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118349 which will not require splicing as it plugs into factory...
    view full answer...
  • Which Trailer Wiring Harness Will Fit a 1995 Jeep Grand Cherokee With 5.2L Engine
    The correct harness for your 1995 Jeep Grand Cherokee will depend on if you have the factory tow package or not. This can be verified by contacting a Jeep dealer and having them run your VIN. What they say will determine which is correct. If you end up having the tow package, I suggest going with the Curt # C55260. This is a plug and play option and will take very little time to get installed and using. If you do not end up having the factory tow package, I suggest going with the Tekonsha...
    view full answer...
  • Trailer Wiring Harness For A 1993 Jeep Grand Cherokee
    The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118349 is not confirmed to fit your 1993 Jeep Grand Cherokee. There is not a plug and play harness available for your vehicle. The harness that we have confirmed for your 1993 Jeep Grand Cherokee is The Upgraded Modulite Vehicle Wiring Harness # 119147KIT. This harness will work with either LED or incandescent bulbs on both the trailer and the vehicle. It will power the trailer's stop, turn, tail and running lights...
    view full answer...
  • 4-Pole Wiring for my 1995 Jeep Grand Cherokee
    Yes, you can use the Hopkins Vehicle Wiring Converter with 4-Pole End, item number HM48915, to wire your Jeep for a 4-way trailer connection. Keep in mind that this unit will need to be hard wired into the vehicles taillight circuits and that it only supplies 2.1 amps per function so the trailer can only have lights at the rear and no extra lighting. You will need to use a circuit tester, item # 40376, if you need one, to find the correct wiring to splice the connector to. An easier option...
    view full answer...
  • Trailer Wiring Recommendation for 1994 Jeep Grand Cherokee
    For trailer wiring confirmed to fit the 1994 model Jeep Grand Cherokee as long as it was made after 1994 you would want the # 118349. If you have an older model you instead would want the # 46255.
    view full answer...
  • Is Trailer Wiring Included With Draw-Tite Max-Frame # 75041
    None of the hitches we currently offer for the 1993 to 1998 Jeep Grand Cherokee or 1993 Jeep Grand Wagoneer include wiring, but we do offer the wiring separately. If your vehicle is a 1993 model Grand Cherokee or Grand Wagoneer, you would use wiring harness # 119147KIT. If your vehicle is a 1994-1998 model, you would instead use wiring harness # 118349. I am including links to the instructions for both wiring harnesses and the trailer hitch below, as well as some general information...
    view full answer...
  • Installing Tekonsha P3 Brake Controller # 90195 On 1998 Jeep Grand Cherokee Without Tow Package
    On the 1998 Jeep Grand Cherokee without a factory tow package and no 7-way connector at the rear of the vehicle, the blue wire you have found may or may not run all the way to the rear of the vehicle. The wires needed to install a brake controller on your vehicle are not always available and sometimes if the wires are available they are not easy to find. The easiest way to install the Tekonsha P3 Brake Controller # 90195 to your 1998 Jeep Grand Cherokee is with the Brake Controller 7 &...
    view full answer...


< Previous
12



Do you have a question about this Custom Fit Vehicle Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality custom fit vehicle wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Andrew L
Video Edited:
Andrew L
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Cole B
Installed by:
Cole B
Employee Alan C
Video by:
Alan C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-496-5010