bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Tekonsha
  3. Custom Fit
  4. Trailer Hitch Wiring
  5. 4 Flat
  6. Powered Converter
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118405
Retail:$87.54
Our Price: $63.93
You Save: 27%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 1.57 lbs
Add to cart
In Stock
Custom Fit Vehicle Wiring 118405 - Powered Converter - Tekonsha
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system. 1-800-940-8924 to order Tekonsha custom fit vehicle wiring part number 118405 or order online at etrailer.com. Free expert support on all Tekonsha products. Great prices and Fastest Shipping for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (235)
  • Q & A (0)
  • Photos

Tekonsha Custom Fit Vehicle Wiring - 118405

  • Custom Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • Powered Converter
  • Tekonsha

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily
    • Locate connection points in rear cargo area
    • Plug in T-connector
    • Run hot lead to car battery
  • Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
    • Powered module connects directly to battery to avoid overloading vehicle's electrical system
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage:
    • Stop/turn lights: 2.1 amps per circuit
    • Tail lights: 5.6 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located inside your trunk or cargo space, behind the tail lights on both the driver's side and passenger's side. You will need to remove some interior trim or carpeting to access this harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.


Once installation is complete, the 4-way flat connector will be stowed within your trunk or rear cargo area.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.


ModuLite Powered Tail Light Converter

A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.


With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.



118405 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite

Installation Details 118405 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:


Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118405

Average Customer Rating:  4.7 out of 5 stars   (234 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.

by:

Wiring harness install was easy. This is my fourth or fifth vehicle I've done this type of install. Viewed YouTube Etrailer for install video.

James

11/26/2023

Ive had this installed for a year with no issues. Works perfectly!



by:
2017 Mazda 3

I have a 2017 Mazda 3. I ordered the product because I was hesitant about splicing into my car’s wires. This wiring harness made things a lot easier. I watched a YouTube video to get a quick idea of how to do it. The only thing I did different was I ran the wire which connects to the battery through the inside of my car. The wire runs from the trunk, easily squeezed between the rear seat, tucked into the floor panels by the doors, goes up near the driver side, through a small pre-existing gap in the body and to the battery. No drilling though the firewall, no need to go beneath the car. See photos for reference.

Christopher

11/28/2021

Still works great. Got exactly what I paid for. Extremely satisfied!



by:
Mazda Protege5

My second hitch purchased from etrailer for a Mazda hatchback (first '02 Protege5, now '15 Mazda3). Both good experiences.

Very easy hitch install, the inclusion of the fish wires for the frame hanger bolts is a stroke of genius. Don't be afraid of the exhaust isolators, just spray some soapy water and support muffler with a jack or strap. If you can change a flat tire then you can work a wrench well enough to do this in an hour.

'14-15 Mazda3 has a couple of things making wiring easy to integrate. There's a grommet in the left rear quarter floor that's perfectly placed. Just trim some electrical tape to allow an opening, clip the new connector near the lighting adapter & reconnect inside after fishing from outside. I ran power neatly along driver's side rocker & out through the firewall. It's both easier and less vulnerable, just fish one more wire through the mass that exits above the driver's left foot. (Just DO NOT use anything sharp, you don't want to nick any wires and short something out). Finally the battery on my car already had several open connections to use right at the positive terminal, each protected by a fusible link no less! (See photo.) All I needed to add was an M6 stainless nut to connect the new wire.

Only a couple of minor downsides:

Aesthetically this is one of the uglier installs, mostly because the 3's huge muffler is right against the rear valence, leaving no room to tuck anything out of sight. My Protege5's hitch was entirely hidden except for the receiver. Here, unless you're willing to butcher your bumper cover (assuming there's a hitch made to fit that way) you're stuck with what you see in my picture. I saw the round-tube alternative on another similar car and it looked a little better, but that one requires support straps for a rack with any carrying capacity.

Design-wise I ran into one surprisingly annoying thing the first time I went to insert my drawbar. The hole in the receiver for the hitch pin is set really close to the hitch frame, and there's a gusset plate on top, which leaves basically no room for the clip that secures the pin. My existing clip didn't fit at all until I ground the ends a little. The clip that came with the new hitch sort of fit, but only jammed up against the hitch so hard that it scratched right through the protective powder coat. Weird in a product from such an experienced manufacturer, but easy to rectify.



by:
2017 Toyota Camry

All equipment was delivered on time. Hitch, wiring harness, receiver and ball. Watched video's on installation of harness and hitch. Went down to my garage and installed both with the help of my girlfriend. Very satisfied with the products and the installation. etrailer supplied the goods and the knowledge. I am very happy that I went this route.



by:
2019 Toyota Corolla

Harness arrived rapidly, faster than Amazon. Looks to be a simmple installaion.



by:
2014 Mazda 3

Good product. Printed Instructions a little confusing but online directions were excellent.



by:

Hitch installed easily on my 2014 Toyota Corolla.
Wiring had poor instructions in the box but the video posted on etrailer’s site answered my questions.
No issues and everything worked.
Thanks.



by:

Well it worked



by:

No instructions for my vehicle

Etrailer Expert

Jenny N.

6/9/2023

I am sorry that the instructions were missing. I will send you a copy via email and it can also be downloaded from the product page. It is in link towards the bottom of the page before you see the reviews. We also have a video install on a 2016 Toyota Corolla.



by:

It took four times to order because your system had my old address and finally after I talked to someone who knew what to do and he placed the order!! Although I had to pay for half of shipping!! I would like my shipping amount reimbursed!!!!



by:

The harness works great once installed. Printed installation instructions were general for many vehicles and woefully inadequate . On my Mazda 3 wagon I ended up drilling a hole through an internal body panel and lining it with a rubber grommet for the wire to pass through rather than running the wire between the tail light assembly and its receptacle(?) in the body panel as instructions indicated. The foam lining around the edge of the receptacle was thinner than the wire and I'm sure the wire would have been crushed between the tail light assembly and the edge of the body panel opening, and eventually short out.



by:
2014 Toyota Corolla

Package came on time and it was exactly what I ordered. Very pleased.



by:

Great trailer hitch, works great. Had it installed by a local gas station, really like the simple attachment process for both hitch and lights hookup. I highly recommend this product.



by:
2014 Toyota Camry

Great product. This is my fourth one from etrailer. A bit more difficult to install. Had to think up some way to hold it up singlehandedly, but managed it. See attached picture.
Will deal again with you in a flash.



by:

Company is easy to deal with and offers quality products at competitive prices. The instructional videos should make the installation much easier.



by:
2015 Toyota Camry

Great service fast delivery proper items videos to help install. Great job guys. It was a pleasure shooing with you.



by:
2014 Toyota FJ Cruiser

Installation is a little tedious due to tight spaces to get to existing lights. I do not understand the purpose of requiring a power source. I have stalled other wire harnesses in the past that just connect to the existing lights and on your way.

Etrailer Expert

Patrick B.

7/30/2015

The purpose of the power feed is to isolate the power draw to a dedicated line. This way, if there is a short on the trailer the subsequent overload happens on the dedicated power wire, blowing the fuse, and preventing over-draw on the vehicle wiring. If the trailer lights got their power through the vehicle tail lights power, then a short on the trailer would over load those circuits potentially damaging the vehicle wiring or lights.



by:

Trailer hitch / draw bar = Excellent design and installation.
Wiring harness received, not yet installed. Comment to follow. rw



by:
2011 Toyota FJ Cruiser

So I’m a woman and I could install this, so it’s that easy to follow. Needless to say my husband was a bit impressed. I won’t lie the wire connectors were a bit hard to clamp and connect but otherwise everything was super easy to install and works great!

Katelyn

4/5/2021

Still works fantastically, I haven’t used my trailer much during the winter, however during the fall it was still holding up quite well. I still highly recommend this product!



by:
2014 Volkswagen Passat

My third hitch from etrailer: 2000 VW Passat, 2006 Mazda 3 Sedan, now 2014 Mazda 3s GT. In all three, the plans and fit-up were excellent. For the 2014 Mazda 3s GT, I bought the 24914 Draw-tite hitch, with 3493 draw bar and 19256 ball. With the standard chrome exhaust tips, I had to lower the muffler for the hitch mounts to clear the exhaust. This was the most difficult part -- windex for lubrication and a strong grip pulled off the four rubber muffler hangars, lowering the muffler on a floor jack about 6". The hitch then fit perfectly to the mounting holes, and the part metric, part SAE hardware provided was high grade and correct. Fishing the mounting bolts through the frame members was the simplest part. Tightened nuts, raised the muffler, and then lubed and pushed on the hangars again. Done in about two hours. Four ibuprofen in anticipation of sore muscles. Nothing new. Top of the draw bar at the hitch is at 11" from the ground, putting the drawbar top at 13-1/4".
I installed the 118405 wiring harness without problems, choosing to route the power wire for the switch "converter" along under the interior trim under the doors and into the interior fuse box compartment, then into the engine compartment by a single hole punctured through an existing rubber nipple just above the wiring feedthrough on the firewall. I changed the ring connector to a 1/4" ring connector to match the existing 6 mm post on the Mazda battery terminal block (thank Mazda for the ready-made posts for accessories). Works!
Once again, etrailer gave me all I needed in one shipment, and everything fit as planned. No problems pulling my lightweight sailboat trailer and utility trailer. Another satisfied customer!



by:
Mazda

This wiring kit was purchased for installation on a 2017 Mazda 3 sedan.

As received, the installation instructions made no reference to any Mazda 3. There was reference to a Mazda 6 with incomplete instructions and pictures. The company web site offered no further clarification.

I am an automotive engineer with an electrical background and the installation was far from obvious. Wire color codes did not match the car harness. The power wire to be routed to the battery was black. Vehicle power is usually red. The fuse holder and its wiring to be atttached to battery plus was yellow. The power wire leading into the control module was red. So, we have a yellow wire connected to a black wire, connected to a red wire. What a mish-mash!

I finally called the manufacturer and spoke with a customer service representative. He was not able to help immediately but took time to find the right information and called back.

Once the install information was received, the installation went reasonably well with the most difficult part being the routing of the power wire forward to the battery. To protect the wire and install it securely, I removed the plastic undertrays and routed the wire alongside some fuel or hydraulic lines. As mentioned by other users, more ty-wraps would have been useful. I used some from my existing supply.

After install, I tested the function with the boat trailer and it appears to work as designed.



by:
Mazda

It's nice to have plug and play wiring for a trailer hitch. The install was easy after watching an installation video on the etrailer website. The paper instructions aren't that great but having a video to watch made that insignificant. The most difficult part was running the power wire for the module up to the front of the car. Being a new car the underside is covered with plastic covers front to back. Had to take the covers loose to run the wire above the covers so it would be protected. This was installed on a 2018 Mazda 3 sedan with LED taillights.



by:
2004 Mazda 6

Good product. Good price.. a little ghetto how the light wire for the trailer needs to hang out of the truck when using the trailer but that is normal for the car. After a year it works well the wire sit fine in the truck seal and never gets a cut in the wire which I was afraud of.. great set up and I would recommend it to anyone for the price.. I use the wiring and hitch on a Mazda 6 with a large 10 foot trailer and it works great.. oddly the car even handles the trailer well. Very happy



by:
2014 Mazda 3

Running a wire to the battery is not an easy install!

I was hoping for a plug in play solution for my 2014 Mazda 3. This was highly rated as a great solution and a fairly easy install. I did not read well enough or watch the video because it is easy until you need to run the wire to the battery. Without a lift, that is not easy to do and took a few hours.

The good:

Easy to plug into the lights in a 2014 Mazda 3 without removing the tail light. Seriously, don't do that. It's not needed. Just take the lining out on the driver's side to get easy access.

The video of the install is helpful but don't mount the device under your car. Keep it in the trunk where it can be protected. Then you are only feeding one wire out through a gasket. You can keep the trailer connector in your trunk.

The bad:

The instructions are useless. Throw them away. They probably don't even have your vehicle listed. Watch the video instead and modify those instructions for you use.

Splicing and crimping required! Make sure you have a crimping tool. Makes this much easier.

The connectors are horrible. Go buy 12-10 waterproof connectors that you can heat shrink. I couldn't get the wires to stay in the connectors after crimping them. They would pull out easily. The video even says to use different connectors.

Routing the wire from the back to the front was not an easy task and took hours to do. The hardest part is figuring out how to run it under the car and protect the cable and then doing it while working an a very confined space. A lift would make this much easier.

Conclusion:

Not the easiest to install but doable by someone who has some mechanical ability. If you have access to a lift, definitely use it to run the cable to the battery. Expect to use some choice words when working on the run to the battery if you don't have a lift.



by:
Toyota FJ Cruiser

About a year ago I purchased a Tekonsha custom fit vehicle wiring. It has been easy installation and have enjoyed the product. This was the only available fit for my FJ Cruiser which did not come with a hitch in earlier models. However, the wiring I purchased works fine and I am very happy that I could now tow my jet ski with proper signaling....

Thank you George at ettailer for your help in selecting the wiring.

Kem


25
235
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

  • Recommended Trailer Wiring Harness for 2018 Mazda 3 with LED Lights
    For your 2018 Mazda 3 Sedan with LED lights, I recommend the Tekonsha T-One Vehicle Wiring Harness # 118405. This custom harness is confirmed to fit your vehicle and will install by connecting directly to existing ports located behind the driver and passenger side tail lights (inside the trunk). Once these connections are made, you will just need to run the hot lead up to the Mazda's battery. This will provide you with a 4-Way connector to connect with and power a trailer's basic signal...
    view full answer...
  • Recommended Trailer Wiring Harness for 2019 Toyota Corolla Sedan
    For your 2019 Toyota Corolla I highly recommend the Tekonsha T-One Vehicle Wiring Harness # 118405. We have found over the years that Tekonsha's powered converter modules are extremely reliable and hold up much better over time than those from other manufacturers. This particular harness will plug right into existing ports behind the tail lights on your Corolla and it includes the hot lead that needs to be run up to the battery. This will provide you with a 4-Way connector to connect...
    view full answer...
  • How To Tell If Lights On 2015 Mazda 3 Are LED Or Incandescent
    You can find out if you have LEDs a couple of ways. The easiest is to remove the lens of the lights and if it has a bulb it is incandescent. If it has diodes then it is LED. Another way is to turn the lights on and then watch as you turn them off. If the light go off abruptly, they are probably LED. If the filament takes a moment to go out then it is probably a bulb. The third way is to contact your dealer with the VIN and they will be able to tell you what lights are on your Mazda 3.
    view full answer...
  • Where are the 2008 Toyota FJ Cruiser Connection Points for Trailer Wiring, # 118405
    On the 2008 FJ Cruiser, the access points are going to be behind the taillights. The drivers side is the easiest. There is a small panel in the cargo area that you will remove and the taillight assembly will be right behind it. The passenger side requires loosening the trim panels on the passenger side cargo area to gain access to the taillight assembly. If your FJ Cruiser has the optional sub-woofer, it will need to be temporarily removed to gain access to the passenger side taillight...
    view full answer...
  • No Running Light Power After Installing Trailer Wiring on a 2009 Toyota Camry
    It looks like the brake light and running light wires on harness # 118405 plug into the same location on a 2009 Toyota Camry. Check the converter wiring going into the converter to see if power is at that point since it is already at the tail light. If it is not on the brown wire going into the converter then check the connectors for bent or broken pins. If they you find a broken pin that harness will need to be replaced. A bent pin could be very carefully bent back. Make sure that the...
    view full answer...
  • Recommended Trailer Wiring Harness for 2006 Mazdaspeed 6 Sedan
    Yes, the Tekonsha T-One Vehicle Wiring Harness # 118405 referenced in your question is confirmed to fit both the 2006 Mazda 6 and the Mazdaspeed 6 Sedan. I confirmed this with my contact at Tekonsha. This custom-fit harness will install by connecting directly to the built-in ports behind the driver and passenger side tail lights (inside the trunk). You will then need to run the hot lead up to the vehicle's battery. I have attached the complete installation instructions that you can also...
    view full answer...
  • Trailer Wiring Harness that Fits 2014 Mazda 3 Hatchback with LED Taillights
    The correct trailer wiring harness for your 2014 Mazda 3 hatchback that has LED taillights is the Tekonsha part # 118405.
    view full answer...
  • Trailer Wiring Harness Recommendation for 2014 Mazda 3
    The good news is that the trailer wiring harness part # 118405 fits your 2014 Mazda 3 whether it has LEDs or does not so it would work well for you either way. It also fits sedans or hatchbacks too. LED taillights are a bit different than incandescent bulbs. For me, if they are obnoxiously bright and almost hurt your eyes to look at they're LEDs...haha. The other more reliable way to tell is to look at the transition of the lights from off to on. If they lights seemingly warm up as they...
    view full answer...
  • Trailer Wiring Harness Recommendation for 2014 Mazda 3 Hatchback
    For your 2014 Mazda 3 Hatchback without LED taillights the Tekonsha wiring kit part # 118405 would be the correct we recommend. I attached a link to an install video that shows the harness installed on a similar Mazda vehicle as well as a link to the install instructions for you to check out as well.
    view full answer...
  • Trailer Wiring Fit Recommendation for 2017 Toyota Camry
    For trailer wiring confirmed as a fit for your 2017 Toyota Camry you would want the Tekonsha kit part # 118405. We do carry this and it will work well.
    view full answer...
  • Trailer Hitch and Wiring for a 2008 FJ Cruiser
    The vehicle wiring harness is sold separately from the hitch. For your 2008 FJ Cruiser, you will need the Draw-Tite Class III Trailer Hitch Receiver, item # 75461, and the T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, item # 118405.
    view full answer...
  • Towing Capacity of 2007 Toyota FJ Cruiser
    Based on my research, it looks like the total weight of your 2010 LD Casita Trailer is between 2,200 and 2,500 pounds, depending on the specific model that you have. When looking at the online owner's manual for the 2007 Toyota FJ Cruiser, it shows a maximum trailer weight of 5,000 pounds. WIth these numbers in mind, you will have no issue towing your trailer if you decide to go with the FJ Cruiser. I do recommend verifying the capacity with your dealer or with your copy of the owner's...
    view full answer...
  • Will Draw-Tite Trailer Hitch 24814 From 2012 Toyota Corolla Fit 2016 Corolla
    I was able to look up your trailer hitch order from etrailer.com for your 2012 Toyota Corolla and found that the hitch you purchased is the Draw-Tite Sportframe Class I Trailer Hitch Receiver 24814. While some of the hitches from the 2012 Corolla are fits for the 2016 model, unfortunately the 24814 trailer hitch is not confirmed to fit the 2016 Toyota Corolla. For your 2016 Corolla, I recommend the Draw-Tite Sportframe Class I Trailer Hitch Receiver # 24913. I like this hitch because,...
    view full answer...
  • Will Tekonsha 118405 Wiring Harness Fit 2015 Mazda 3 Hatchback
    According to Tekonsha, this wiring harness fits the 2014-2018 Mazda 3 Hatchback. So yes, you can use the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118405 on your 2015 Mazda 3 Hatchback. This wiring harness will plug directly into existing wiring so no cutting or splicing is required. Once installed you will have a 4-way connection to power your trailer's signal lights. I have attached an installation video for your reference.
    view full answer...
  • 2012 FJ Cruiser 4-Way Trailer Wiring Recommendation
    For 4-way trailer wiring for your 2012 Toyota FJ Cruiser you would want the part # 118405 that has been confirmed as a fit for your vehicle. The wiring harness you found could be for trailer wiring but it is not a style of connection that we sell a harness for. There might be a Toyota option that you could get through a dealer. The part # 118405 installs inline with the taillight assemblies of your vehicle to provide the 4-way signal. I attached an install video for you to check out.
    view full answer...
    Image 1 for
  • Brake Light Circuit Wire for Brake Controller Installation on a 2007 Toyota FJ Cruiser
    According to my research you'll find the stop light switch function on a Green and Yellow wire so you can install the Prodigy P2 # 90885 to your 2007 Toyota FJ Cruiser. For your single axle application you'll want to use the 20 amp circuit breaker like you said.
    view full answer...
    Image 1 for
  • What is Needed to Install a 4 Way Flat Wiring Harness on a 2014 Toyota Camry
    What you are needing is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118405. This will provide you with a 4-way flat trailer connector at the back of your 2014 Toyota Camry to power your trailer's signal lights. This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located inside your trunk or cargo space, behind the tail lights on both the driver's side and passenger's side. You will need to remove some interior trim or carpeting to...
    view full answer...
  • Weight of Draw-Tite Trailer Hitch 75461 For 2011 Toyota FJ Cruiser
    I checked with the manufacturer, and the weight is 34 lbs for the Draw-Tite hitch that fits your 2011 Toyota FJ Cruiser: - Draw-Tite Max-Frame Trailer Hitch Receiver # 75461 I have added a link below to a video showing the install of this hitch on an '11 FJ Cruiser, and also wanted to mention that if you need a trailer wiring harness for your vehicle the correct fit is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118405.
    view full answer...
  • Recommended 4-Way Flat Connector for a 2014 Toyota FJ Cruiser
    I do have a solution for you to add a 4-Way Flat wiring connector to your 2014 Toyota FJ Cruiser but unfortunately the T-One Vehicle Wiring Harness # 118245 won't fit. Instead what you will need to use is one that tees in behind the tail light housing. I recommend the T-One # 118405 because we have found the Tekonsha wiring to be the most reliable. This tees in behind your tail lights and then draws power directly from your battery so as not to overload your wiring system. Attached is...
    view full answer...
  • Largest Trailer Hitch Receiver For 2010 Mazda CX-7
    A 4 inch trailer hitch receiver is not available for a 2010 Mazda CX-7, or for any vehicle that I am aware of. The largest hitch that fits a '10 CX-7 has a 2 inch receiver: - Draw-Tite Max-Frame Trailer Hitch Receiver # 75512 This hitch is a custom fit for your CX-7, does not require drilling to install, and has a 3,500 lb towing capacity. If you are using it for towing and need a trailer wiring harness, the correct fit for your 2010 CX-7 is the T-One Vehicle Wiring Harness with 4-Pole...
    view full answer...
  • Will The T-One Vehicle Wiring Harness Item # 118405 Fit A 2015 Toyota Corolla S Model
    Great question! Yes, the T-One Vehicle Wiring Harness Item # 118405 is compatible with your 2015 Toyota Corolla S. I have included a link to an instillation video on a 2016 S. The instillation will be the same. This wiring harness lives in the trunk of the vehicle however, in the video I talk about how you would run the 4 pole end out with the power wire so it can be mounted outside the vehicle. If you choose to route the 4 pole outside the vehicle, I recommend adding a No-Drill Mount...
    view full answer...
  • Recommended Trailer Wiring Harness/Tailllight Converter for 2007 Toyota FJ Cruiser
    Your FJ cruiser uses a separate bulb for turn signals, instead of the less sophisticated wiring system used on most trailers where one circuit carries both the turn signal and brake lamp. In order for the trailer connector to work correctly, you'll need a taillight converter. The Hopkins # HM48915 you'd looked at would work, but there are easier to install (albeit more expensive) plug and play options like # 118405 which plug inline at the connection between the vehicle taillight harness...
    view full answer...
  • Is a Tail Light Converter Needed When Installing ETBC7 on a 2009 Toyota FJ Cruiser
    If your 2009 Toyota FJ Cruiser came with or already had a 4-Way flat trailer connector that you plugged into the back of # ETBC7 then you will not need a converter. But if the vehicle did not have a trailer connector of any kind and you are trying to install the ETBC7, you will need to first install a 4-Way using # 118405. I have included some links that show and explain the ETBC7 installation for you.
    view full answer...
  • Right Side Trailer Lights Not Working on Trailer Towed by a 2011 Mazda CX-7
    This sounds like a bad ground problem if it is just the one side. The first thing you should do is unplug the trailer and use a circuit tester like # PTW2979 if needed to test the 4-Way on the vehicle. If all of the functions are working fine on the 4-Way then you know the problem is somewhere on the trailer. If the 4-Way is not functioning correctly then test the wires going into the converter box from the vehicle. If they are not correct then the problem is on the vehicle and will need...
    view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Alan C
Test Fit:
Alan C
Employee Randy B
Test Fit:
Randy B
Employee Shane H
Test Fit:
Shane H
Employee Ryan G
Test Fit:
Ryan G
Employee Mike L
Expert Research:
Mike L
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Sue W
Video Edited:
Sue W
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Kathleen M
Video by:
Kathleen M
Employee Jonathan Y
Video by:
Jonathan Y
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.