bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Tekonsha
  3. Custom Fit
  4. Trailer Hitch Wiring
  5. 4 Flat
  6. Powered Converter
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118470
lowest price pledge
Our Price: $61.70
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 1.68 lbs
Quantity: 
In Stock
118470 - Custom Fit Tekonsha Trailer Hitch Wiring
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system. 1-833-496-1390 to order Tekonsha custom fit vehicle wiring part number 118470 or order online at etrailer.com. Free expert support on all Tekonsha products. Guaranteed Lowest Price and Fastest Shipping for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (76)
  • Q & A (0)
  • Photos
  • Why etrailer?

Tekonsha Custom Fit Vehicle Wiring - 118470

  • Custom Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • Powered Converter
  • Tekonsha

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily
    • Locate connection points in trunk
    • Plug in T-connector
    • Run hot lead to car battery
  • Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
    • Powered module connects directly to battery to avoid overloading vehicle's electrical system
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage:
    • Stop/turn lights: 2.1 amps per circuit
    • Tail lights: 5.6 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located inside your trunk, behind the tail lights on both the driver's side and passenger's side. You will need to remove some interior trim or carpeting to access the harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.


Once installation is complete, the 4-way flat connector will be stowed within your trunk.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.


ModuLite Powered Tail Light Converter

A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.


With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.



118470 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite

Installation Details 118470 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118470

Average Customer Rating:  4.8 out of 5 stars   (76 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.

by:

I ordered the T-One vehicle wiring harness for my 2010 Nissan Sentra. Wow! The last time I wired a vehicle for trailer lights, I nearly needed an electrical degree. The folks who produced this harness has it all thought out for you and makes for a simple and reliable installation. In addition, the design provides you with all modular connectors, so there is no need to cut into the wiring on your expensive automobile. (No potential faulty hookups here!) You've got absolute safety without affecting your vehicle's warranty. Definitely worth the price, and you've got the excellant service that etrailer provides to each and every customer. Many thanks to Drew for his help in making my selection!




by:
Nissan Altima

Awesome service polite and respectful. I'm thankful that you even make a hitch for my Altima. You blessed me Thank you Thomas Hallam. My recommendation, to anyone that needs professional help




by:
2011 Nissan Altima

Seems to be great quality like oem and great video for instructions. Hopefully it holds up for years to come




by:

I wanted to thank you guys for a great product. I belong to the Disabled American Veterans Chapter3 here in Columbus, Oh. We purchased your hitch and installed it for a 90-year old World War II veteran. We donated and also installed a carrier, which is slides into the hitch. The veteran can now load his scooter on the carrier and go where ever.
Thanks again.




by:
2007 Nissan Altima

Thanks etrailer for your informative videos. I haven't installed the connecter due to a busy schedule and it arrived earlier than anticipated. When my order was confirmed it said my part would arrive on Monday but it actually showed up on Friday. The parts sent were exactly correct and after watching the videos I saved 50% from the first quote that I was given locally. Also the reason that I'm confident about the right parts having been ordered and shipped is due to the fact that I installed the wrong parts that I was sold from auto zone earlier in my project. Next time I won't waste my time and money at local stores who employ zombies and I will highly recommend etrailer to anyone in the future.


Comments
Easy install without any glitches
David R - 05/18/2021


by:

Installation was easy and quick, used hitch to bring camper I purchased home and worked excellent, very good purchase and product with very good instructions.
Thanks, AAAAA+++++++




by:

Pros: Instructions were easy to follow and the installation video was a good supplement.

Good shielding on the wires.

No splicing required.

Cons:

The trailer wire is a little on the short side. Would like to have a little more slack to the trailer.

Running a direct wire to the battery added a lot of time to the installation and added a lot more complexity.




by:

Great Service and easy




by:
2013 Nissan Altima

This is my third wiring harness purchased from etrailer and all installations went according to plan. This was installed on a 2013 Nissan Model Altima S. NIce neat installation. Instead of running the wire and the plug out the trunk, I used one of the two rubber plugs at the bottom of the spare tire well (I used the one closest to the back of the car). If you pull the rubber plug out, cut a hole in the plug about the shape and size of the wires, then cut one side of the plug all the way through so you can put the wires inside the hole you cut. Then reinsert the rubber plug with wire installed in it. Next remove the tire well shield underneath the car enought to see the wire and plug you just installed and pull it towards the back. Buy a connector mount and mount it to the trailer hitch. Mount the connector a little higher then the lowest point of the hitch to avoid damaging it in case you hit a low spot. Good luck


Comments
Hey I just read your review, I also have the same 2013 Altima s, and I am trying to run wires through pretty much the same thing you are talking about. I see that rubber plug, but where does it come out underneath the car? Also, what tire well shield are you referring too? Any information you can provide would be amazing, and most appreciated.Thank you, Zach
-- comment by: Zach - 12/14/2013


by:

Works great! Was able to install in a day and have had no issues since.




by:
2014 Nissan Altima

Easy to install, instructions were very good. Works great.




by:
2014 Nissan Altima

My third hitch from etrailer in past few years. I wish my cars would last as long as your hitches. All 3 fit and performed perfect. Thanks




by:
2010 Nissan Altima

Good product. Installed in the trunk without a problem and I was able to route the trailer connector through the grommet under the spare and strap it to my hitch. This kept me from having to pull it out and close my trunk on it each time I was pulling a trailer. Be ready to spend some time making your way to the battery. That part is very time consuming. I was able to go along side my gas tank and run the wire with the break lines all the way to the front strapping it as I went along. My wire isn't going to be caught by a stray stick in the driveway!!




by:

This was such an awesome experience!!! My husband and I stumbled across etrailer.com when we searched for online videos on how to install a hitch. We then purchased all the materials needed directly from the website. Neither of us know a whole lot about cars but were able to easily install the hitch and wiring by watching their install video and the paper instructions sent with the products. The part of this experience I am MOST impressed by is when I got a call shortly after placing my online order to let me know that what I had originally purchased was not compatible with each other. She then continued to efficiently and successfully modify my order to all the right products needed and I didn’t have to do a thing! If that’s not great customer service then I don’t know what is!!! Without that phone call, I would have received incompatible products and been in a real pickle due to time constraints. THANK YOU SO MUCH ETRAILER! You guys rock! Because of you, I now have so much more confidence in doing self-maintenance on my car.




by:
1997 Ford Ranger

Instalation was easy. It helps if your somewhat of a handy person. The trunk part was really easy. (be careful removing the rear plastic). Running the wires from the engine compartment took a little work. It help to have car ramps.
Watch the online video it will guide you.
I haven't pulled my trailer as of this review but I tested everything and it checked out fine.
Thanks




by:
2013 Nissan Altima

Unfortunately I ordered the wrong one at first, and spent way too long trying to make it work. Once I realized my mistake I ordered the right part. It took less time install this then it does for me to hook the boat onto the hitch. Yeah, I could have wired my own harness to the taillights, but this took no time at all. Well worth the price!




by:

works for what I needed it for. and I appreciate the company for getting in contact with me. just what i needed to trailer my motorcycle.




by:

Shipping was a day earlier than promised! Can't beat the price ... anywhere! I got a Hidden Hitch and wiring harness. The only thing I noticed were a couple of small paint chips / scratches down to bare metal on the hitch frame. I sprayed undercoating over the entire frame so that I wont every have to worry about any rust. Thanks etrailer!




by:
2012 Nissan Sentra

Very straightforward install...until you get to the power cable. Watched a video indicting to drop the cable out a grommet and then down below the trunk then route it under the vehicle. This was quite tedious, and without clear instructions, I am unsure how good of a job it is. cable states route away from hot exhaust, but the trunk grommet comes out right by the exhaust. If you aren't comfortable with running power cables, I'd recommend having a pro do this for you. The modular harness is awesome, made for easily installation of the kit.




by:
2007 Nissan Sentra

The hitch that i purchased for my 2007 Nissan Sentra fit up very nicely and came with all the parts required to complete the job. The instillation videos on the web site made the process a breeze. The wiring harness also came with everything needed and there was also an instillation video available on the web site. I would Highly recommend Etrailer




by:
2015 Nissan Altima

I do NOT recommend this product. This product requires a high skill level and much more time to complete! I am going to return this product. The product description should have included this information to the consumer!!!! This wiring ( 118470 T-one W/prot Modulite) is NOT what the product was advertised. It should have been made it very clear in the product description that installation REQUIRED it to be hard wired into the vehicle battery via a long wire from the rear trunk area all the way to the battery in the front of the car.




by:
2015 Nissan Altima

product works well. had a little scare but determined that the Harbor Freight trailer had a non existent ground. I had to run separate ground to all four lights.




by:

Exactly what I ordered and what I expected. Straightforward installation. e trailer made ordering a snap and I received my order in the time they quoted.




by:
2008 Nissan Sentra

Awesome product, fast shipping, service was great! Took mi 2 hours to instal it, using the 2 videos - how to install and how to wire the Hitch to my 2008 Nissan Sentra. Keep in mind i did not have a lift at home so i had to use 2 jacks...
Anyway, i can pull my carpet extractor around now :)





by:

Great product, good price and surprised by the high quality components. Installation was a breeze with the provided intructions. The harder part of installation was routing the power wire to the battery. Delivery to Mtl from order took 10 days to my door. USPS is great for shipping to canada and the parcel go thru the border without supplemental fee like thoses charged by FEDEX or alike providers.

Thank you very much, Jack.



25
76
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring



  • Can the Power Wire for Trailer Wiring Harness 118470 Go Through the Firewall on a 2012 Nissan Altima
    Like the review states, that grommet should be there. Otherwise you will need to continue looking for a place to drill or route the wire underneath the vehicle. We have an informational FAQ I wrote that should help a little. It does not cover any specific vehicles but it does give you options for routing the wire. It is possible that there are other factory entry points through the firewall. The issue is that the wire bundles going through them may be so tightly packed that getting an...
    view full answer...
  • Trailer Wiring Harness for a 2013 Nissan Altima Sedan
    You will not need any extra equipment to install wiring harness # 118470 on your 2013 Nissan Altima sedan. It comes with everything you will need. I have included a link to a video showing a typical installation and a link to the installation instructions for you. If you want some tips on routing the power wire, I have included an FAQ article that will help you.
    view full answer...
  • Recommended Wiring for a 2010 Nissan Altima Sedan
    I would advise against splicing into the vehicle wiring on your 2010 Nissan Altima. Like you mentioned regarding the issue with your 2007 Accord, by splicing, especially on newer vehicles, you run the risk of causing problems with the vehicle computer system, which could control everything from tire pressure sensors to something as crucial as the ignition. The best route will be to use the custom-fit wiring # 118470, as it pulls power directly from the vehicle battery instead of from...
    view full answer...
  • Trailer Wiring Recommendation for a 2010 Nissan Altima Sedan
    Both wiring harnesses for the 2010 Nissan Altima Sedan require a power wire ran to the battery and an in line fuse installed. It is absolutely necessary and the trailer wiring will not work without it. More and more cars are being made with thin wiring that is not capable of handling the added power draw of trailer lights. The powered converters virtually eliminate the power draw from the vehicle wiring protecting it and other electrical components from damage. Both wiring harnesses install...
    view full answer...
  • Wiring a 2007 Nissan Sentra
    You will need the T-One Connector w/Upgraded Circuit Protected ModuLite, part # 118470, to wire your 2007 Nissan Sentra for towing. The harness has a modulite built in that draws power for the trailer tail lights and protects the sensitive circuitry on the vehicle. The wire and inline fuse are included for connection to the vehicle battery. You could also use the # 119147KIT for your vehicle. The only difference is that you will have to splice into the vehicle wiring for installation...
    view full answer...
  • Is Drilling or Modification Needed to Install a Trailer Hitch on a 2013 Nissan Altima Coupe
    There is no drilling required to install the Draw-Tite trailer hitch # 24801 for the 2013 Nissan Altima Coupe. However, access holes will need to be enlarged in order to get the hardware in place. Since you are leasing the vehicle I do not recommend making modifications to the vehicle unless the dealer leasing the vehicle determines it is ok to do so. I have linked the instructions that you can show the dealer to help make that decision. If you get the go ahead to install the trailer hitch...
    view full answer...
  • Hitch Recommendation for a 2011 Nissan Altima Coupe
    The Draw-Tite part # 24801 that you referenced would be an excellent choice for your 2011 Nissan Altima coupe. There isn't a Class II hitch available for your vehicle though. To complete your towing setup you may also be interested in purchasing a ball mount, Tow Ready Trailer Wiring Harness part # 118470, a 1-7/8 inch ball # 19256 and 2 inch ball # 19258.
    view full answer...
  • Is Drilling Required to Install a Trailer Hitch on a 2011 Nissan Altima
    All of the trailer hitches for your 2011 Nissan Altima require drilling and temporary removal of the muffler for installation. All of them also are rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight so they can handle a trailer up to those capacities. Check the Altima owners manual for its towing capacities and go by the lower rating. Given what is required to install the hitch it may be worth saving yourself the time and effort and having it professionally installed...
    view full answer...
  • Does the Muffler have to be Removed to Install a Trailer Hitch on a 2013 Nissan Altima Sedan
    All of the trailer hitches for a 2013 Nissan Altima Sedan do require temporary removal of the muffler in order to complete the installation. The most popular hitch option for the vehicle is Draw-Tite trailer hitch # 24796 that you have referenced. I have included a link to a video showing a typical installation and a link to the installation instructions for you. If you plan on doing some towing first consult the vehicle owners manual for the vehicles capacities. For a ball mount use #...
    view full answer...
  • Trailer Hitch and Wiring for a 2012 Nissan Sentra
    Draw-Tite trailer hitch # 24794 is designed to fit the 2007 to 2012 Nissan Sentra including SE-R models so it will fit your 2012 model. I have included a link to a video showing an example installation of this hitch for you. If you plan on doing some towing the correct ball mount is # 3594. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258. And for trailer wiring use # 118470. I have linked a video showing installation of the wiring as well. If you want to use the hitch for...
    view full answer...
  • Trailer Hitch and Wiring for a 2008 Nissan Altima Sedan
    All of the trailer hitches available for the 2008 Nissan Altima require drilling for installation. The hitches are all custom the issue is that there aren't any holes in the vehicle frame to mount a hitch so drilling is required. If you want to go ahead and install a hitch you can use Draw-Tite hitch # 24796. I have linked a video showing an example installation. For a ball mount use # 3594. For a 1-7/8 inch ball use # 19257 and for a 2 inch ball use # 19258. For trailer wiring you can...
    view full answer...
  • Trailer Hitch and Related Towing Items for 2012 Nissan Altima
    If you have the sedan version of the 2012 Nissan Altima then the 1-1/4-inch Class I hitch I recommend is the Draw-Tite # 24796, which has a maximum trailer weight capacity of 2000-lbs. You'll need wiring harness # 118470 to operate the trailer lights. An installation article and video are linked for you. You'll also need a ball mount # 3594 which includes a pin/clip, along with a hitch ball like 1-7/8-inch # 19256 or 2-inch # 19258. The trailer coupler will indicate the ball size required. I...
    view full answer...
  • Derale 8000 Series Transmission Cooler Part # D13501 for 2008 Nissan Altima
    The hitch itself will provide no problems. It will pull up to 2000 lbs all day long with no issue. Since you are going to be traveling in a hilly area, I would strongly suggest installing a transmission cooler to protect your transmission. The Derale Series 8000 Plate-Fin Transmission Cooler, part # D13501 would be a great choice. The cooler is cheap insurance for your transmission. The installation is fairly straightforward, we have an installation video showing a similar cooler being...
    view full answer...
  • Do I Need To Remove Exhaust Heat Shields To Install CURT Trailer Hitch # 11352 On 2010 Nissan Altima
    I do have some hitch options available for your 2010 Nissan Altima that do not require the removal of the heat shields, but the CURT trailer hitch # 11352, does require the heat shields to be removed. The Draw-Tite hitch # 24796 will allow you to retain the heat shields on your 2010 Nissan Altima. It is a Class I 1-1/4 model, and is has the same tongue weight and towing capacity of the CURT hitch # 11352 that you selected. To complete your towing setup, you will need the following items: A...
    view full answer...
  • Tongue Weight and Towing Capacity of Draw-Tite Class I Receiver Part # 24794
    The folks at Draw-Tite assure me that the Class I receiver you mention, part # 24794 is rated at 200 lb tongue weight/ 2000 lbs towing. This has been confirmed through extensive testing. You will want to check your owners manual to determine the actual towing capacity of the vehicle, and abide by whichever figure is lower. If you were planning on using the hitch for towing a small utility trailer, you might also need the following: A ball mount Wiring harness with 4-pole trailer connector,...
    view full answer...
  • Can a 2 Inch Ball be Used on a Class I Trailer Hitch for a 2008 Nissan Sentra
    You can use a 2 inch ball with a Class I trailer hitch. The ball shank has to have the proper dimensions to fit the correct ball mount for the hitch. On Draw-Tite trailer hitch # 24794, the correct ball mount is # 3594 and for a 2 inch ball you would use # 19258. Even though this ball is rated for 3,500 pounds, you are still limited by the capacity of the hitch (2,000 pounds) or the vehicle (check owners manual) whichever is lower. You will also need pin and clip # PC2. On a Class I hitch...
    view full answer...
  • Available Hitches and Towing Capacity for 2009 Nissan Maxima
    The Hidden Hitch # 60873 (no longer available) and the Draw-Tite # 24796 are identical. They are both manufactured by the same parent company, Cequent Performance Products. Their weight bearing capabilities and installation procedure are identical. For towing, you would also need a ball mount, trailer connector, part # 118470 and a 1-7/8 inch ( # 19256) or 2 inch ( # 19258) trailer ball. According to my research, the 2009 Maxima has a rather modest 1000 lb towing/100 lb tongue weight capacity....
    view full answer...
  • Trailer Hitch and Wiring Recommendations for a 2008 Nissan Altima
    If your 2008 Nissan Altima is a sedan you can use Draw-Tite trailer hitch # 24796. To complete your towing package, you can use ball mount # 3594 with 1-7/8 inch ball # 19256 or 2 inch ball # 19258. For trailer wiring, you can use Tekonsha harness # 118470 to add a 4-Way flat connector to the rear of the vehicle.
    view full answer...
  • 2013 Nissan Altima 4 Door Sedan Hitch Recommendation
    The Draw Tite Hitch part # 24796 would be an excellent choice as a hitch for your 2013 Nissan Altima. There will be a little bit of drilling required, but the heat shield will not need to be removed. Check out the install video I attached for this hitch. To complete your towing setup you may also be interested in the following: Ball mount # 3594 1-7/8 inch ball # 19256 2 inch ball # 19258 Trailer Wiring Harness part # 118470
    view full answer...
  • Curt Hitch Installation Difficulty Versus Draw-Tite on 2007 Maxima
    I've looked over the installation instructions for the Draw-Tite # 24788 and the Curt # C11264. I've linked you to the installation instructions for all three hitches, and as you can see, the procedure for installing all three hitches is identical. There are differences between the hitches, however. The Draw-Tite Class I, # 24788 includes the hitch and the installation hardware only. If all you were needing the hitch for is to provide an attachment point for a bike rack, this is the...
    view full answer...
  • Compatibility of Curt Euro-Style Ball Mount w/ Draw-Tite Class I 24796 on 2010 Nissan Maxima
    When we installed the Draw-Tite # 24796 on a 2009 Nissan Maxima, we found that the hitch height and the setback was the exact same as the Curt # C11352 you referenced. This being said, the Euro-style ball mount won't work with the Draw-Tite hitch. A Class I hitch has the hitch pin hole recessed further back in the receiver than a Class II hitch would be. Draw-Tite and Hidden Hitch punch or weld a stop into the receiver so a Class II rated accessory can't be slid into the receiver far...
    view full answer...
    Image 1 for
  • Tongue Weight and Towing Capacity of 2013 Nissan Maxima
    According to the online owner's manual for your 2013 Nissan Maxima the vehicle's tongue weight (TW) rating is 100-lbs and it's maximum towing capacity (GTW) is 1000-lbs. You can check your own printed manual to see if there is different information for your car provided by Nissan. The hitches offered for your car are all light-duty Class I types that can be viewed on the linked page. All share a 200-lb/2000-lb rating but since your car is rated lower, you need to abide by that lower rating...
    view full answer...
  • Removing the Mufflers on a 2011 Nissan Altima for Trailer Hitch Installation
    When installing the Draw-Tite Trailer Hitch # 24796 on a 2011 Nissan Altima, you will still need to temporarily remove that portion of the exhaust as indicated in the instructions. With the band clamp instead of a flange, you will just re-install the same parts that came with the clamp when you removed it. No sealant or gasket will be required. I have included a link to the installation details and a video showing a typical installation for you. In the video, the 2010 Altima actually...
    view full answer...
  • Recommended Trailer Hitch Receiver and Vehicle Wiring Harness For 2014 Nissan Altima
    I would be happy to recommend a trailer hitch receiver and vehicle wiring harness for your 2014 Nissan Altima. Starting with the trailer hitch receiver I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24796 which has a 200lb tongue weight rating and 2000lb trailer weight rating. Moving on to the wiring I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118470 which will plug in to your factory wiring and will...
    view full answer...


< Previous
12



Do you have a question about this Custom Fit Vehicle Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality custom fit vehicle wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Brandon M
Expert Research:
Brandon M
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Sue W
Video Edited:
Sue W
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-833-496-1390