To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
Specs:
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located in your rear cargo area. You will have to remove the threshold cover, cargo trays, and some interior paneling to access this harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed in your rear cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's multiplex-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (41 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.The product was compatible and an effortless install. The only issue I have is I have no idea where the 30amp fuse goes; there is no dedicated position-labeled trailer on my fuse box. Otherwise very happy with my purchase.
This kit didn’t fit. I still have it in the box if you could find it in your hearts to take it back.
Easy to install. Great install video on your website (the order page) Thank you!
great looking product, all hardware you need is included and etrailer has install videos to guide you if you have problems.
Do to the fact that institutions say a for one side and b for the other and harness isn't marked I haven't even tried to install yet.
Jenny N.
1/12/2022
You mentioned that you have not yet begun to install the harness and I wanted to see if I could help. I was unsure what you meant with your review. Did you have the chance to review the video installation that we have on the 2017 Nissan Rogue Sport.
Item was great information on locating the 12 volts on a 12 gauge wire inside the side panel was not correct.
Had to run a line to the fuse panel under dash
Everything fit like your video shows. Thank you
Everything worked and fit as it should ! Good videos of installation procedures and tricks to help things go smooth!! Very pleased with the product!!!!
Item was easy to install, although instructions could have had better pictures. Kit was missing a fuse, which the instructions said was included.
Other than that, order received faster than I expected.
Would order from you again.
Arrived quickly, decent instructions, fairly simple installation, leads could be just a few inches longer to make installation a bit easier.
Instructions are incomplete for installation on a rogue sport.
Ordered wrong item, my bad.
Fast delivery, good costumers service
The YouTube video was great, about one hour to install
Took a little bit of time but installed with no problems. Works great!
Fairly easy to install,just make sure you have the correct tools on hand .
Excellent product, fast delivery
Easy to install works perfectly
Excellent product fit perfect
Excellent job
Ver good
Quick delivery was much appreciated.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
7/9/2024
I would like to help. Can you tell me more about how it did not fit for you? This harness works with 2017 - 2019 Nissan Rogue Sport. I have a video install on a 2019 Nissan Rogue Sport that you can see below.
Helpful Links
tv-install-tekonsha-trailer-wiring-2019-nissan-rogue-sport-118757.aspx