bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Tekonsha
  3. Universal Fit
  4. Trailer Hitch Wiring
  5. 4 Flat
  6. Converter
ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit

ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit

Item # 119250KIT
Our Price: $209.94
Custom Fit Vehicle Wiring
Shipping Weight: 1.95 lbs
Add to cart
ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit Converter 119250KIT
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Install a 4-way trailer connector on your vehicle without cutting or splicing into your wiring. Zero-contact interface sensors identify the current flowing through each wire by simply clamping onto it. Circuit-protected module is made using SMT. 1-800-940-8924 to order Tekonsha custom fit vehicle wiring part number 119250KIT or order online at Free expert support on all Tekonsha products. Great prices and Fastest Shipping for ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (424)
  • Q & A (0)
  • Photos

Tekonsha Custom Fit Vehicle Wiring - 119250KIT

  • Universal Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • Converter
  • Tekonsha

Install a 4-way trailer connector on your vehicle without cutting or splicing into your wiring. Zero-contact interface sensors identify the current flowing through each wire by simply clamping onto it. Circuit-protected module is made using SMT.


  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately)
  • Bypasses factory wiring and involves no cutting, splicing, or plugging into vehicle's wiring
    • Sensors clamp onto the wires of your factory tail light wiring harness to detect current
    • No feedback, no interference with, and no power draw from your vehicle's wiring system
    • Easily removable and transferrable between different vehicles
    • Circuit tester included to ensure proper setup
  • Includes circuit-protected module that connects directly to car battery for power
    • Power wire, fuse holder, and 15-amp fuse included for installation
  • Works with 2-wire, 3-wire, PWM, and multiplex wiring systems
  • Constructed using surface-mount technology (SMT) for consistent, reliable performance
    • Maximizes trailer light yield and intensity while producing minimal heat
    • Ensures superior operation in rough road conditions
  • Comes with dust cap for 4-way flat connector


  • Application: vehicles with 12V electrical systems
  • Maximum amperage:
    • Stop/turn lights: 4.2 amps per circuit
    • Tail lights: 7.5 amps per circuit
  • 1-Year limited warranty

This revolutionary wiring method makes it fast, easy, and safe to add a 4-way connector to your vehicle so you can power your trailer's lights. Unlike traditional tail light wiring harnesses, which either splice into your vehicle's wiring or plug into designated ports in your factory harness, this system bypasses your vehicle's wiring entirely. Just clamp the intuitive sensors onto the individual wires of your OEM tail light harness and let the ZCI system do the rest.

Zero-Contact Interface Sensors


Each zero-contact interface (ZCI) sensor included with this harness is able to read the current that travels through the wire it is clamped onto. Upon sensing the specific modulation of that wire, a signal can be sent along the wire that connects the sensor to the included 4-way flat trailer connector. That signal is then transmitted through the connector to activate the appropriate function on your trailer lights.

Universal, Worry-Free Design

No Splicing, Cutting, or Connecting to Factory Wiring

Because the ZCI sensors can read the signals sent through your vehicle's wires just by clamping onto them, no cutting or splicing is necessary. The system completely bypasses all of your vehicle's wiring. As a result, your trailer's lights will be powered without overloading your vehicle's electrical system. And there is no chance of damaging feedback either.

When using this ZCI harness, you don't have to worry about voiding your warranty, nor do you need to be concerned about any potentially damaging errors on your part if you're not an experienced do-it-yourselfer. And if you have a vehicle that doesn't allow certain modifications - like a leased car or truck - you can install this harness and remove it later with no obvious alteration to the vehicle.

Maximum Compatibility

This wiring harness is universal. You can use it on any vehicle that operates on a 12V, negative ground system. Because installation is so simple, you can easily remove the unit and transfer it to another car or truck at any time.

In addition, the ZCI sensors are able to read the signals sent by multiplex wiring systems and systems with pulse width modulation (PWM) and low-side-switched wiring, making the harness compatible with nearly all automotive wiring systems. This unit also works with both standard incandescent tail light bulbs and LED bulbs.

Built-In Tail Light Converter

Most trailers run on a 2-wire system - wherein the brake and turn signals are carried on a single wire. Many vehicles, however, are built with separate brake and turn signals. This type of system is referred to as a 3-wire system. If your vehicle operates on a 3-wire system, it will need to be converted so that it will be compatible with the wiring system of your trailer. This is done by adding a tail light converter to your wiring setup to combine the brake and turn signal functions of your automobile so that they run on a single wire to properly activate your trailer's tail lights.

This ZCI unit has a tail light converter built in to ensure proper functioning with any vehicle that operates on a 3-wire system. If your car has a 2-wire system and therefore does not need a converter, don't worry. The method of installing the sensors will take into account the wiring configuration of your vehicle so that only the necessary sensors are used, making sure the appropriate signals are sent back to the 4-way.


This universal harness connects to your vehicle's tail light wiring harness. To connect, just follow the included instructions. There are 4 ZCI sensors included. Each sensor has a colored label on it. Depending on your application, you will need to connect all or some of these sensors to the factory wires indicated in the instructions.

To get the power necessary to operate, the harness must be connected to a 12V power source. The included installation kit provides the hot lead required to connect this module to your car battery. When all connections have been made, connect the hot lead to the black wire on the ZCI power module and run the other end of the lead up to your car battery. Connect the hot lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery. Then insert the included 15-amp fuse into the fuse holder.

Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location either within your cargo area or beneath your vehicle, near the trailer hitch. If you choose to mount the connector near your hitch, a mounting bracket (sold separately) is recommended to keep the connector secure.

It is also recommended that you use a small amount of grease on all electrical connections on the 4-pole connector to help prevent corrosion.

Surface Mount Technology

Each ZCI wiring harness is built using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability, and durability.

Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? SMT components also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.

119251 Tekonsha ZCI Zero Contact Interface Universal ModuLite and Installation Wiring Kit

48705 LED Circuit Tester - 12 Volts

Installation Details 119250KIT Installation instructions

California residents: click here

Customer Satisfaction Score:

Customer Reviews

ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit - 119250KIT

Average Customer Rating:  4.6 out of 5 stars   (424 Customer Reviews)

Install a 4-way trailer connector on your vehicle without cutting or splicing into your wiring. Zero-contact interface sensors identify the current flowing through each wire by simply clamping onto it. Circuit-protected module is made using SMT.


I purchased this kit for my 2018 Macan S. The battery is located at the back which makes it easy to connect to the power.
1. remove the side panels to get to the rear lights (they are snap on)
2. remove the spare wheels cover.
3. Unclips the back light connectors (left and right) and remove tape to access the wires
4. with the provided probe, check for left, right signal wires and mark them
5. with the provided probe, check for Brake and Tail light wires and mark them
6. connect the provides sensors to the corresponding wires (arrow pointing to the lightbulb).
7. Make sure to connect Ground wire (white) to the good location on the vehicle. (on the Macan it took me a while to find good connection spot due to the exceptional paint job the Porsche does, you may connected it to the battery to test it)
8. Connect the power wire to the battery, fuse should be removed.
9. run the learning mode as per interactions provided
10. I purchased a 4-pin test connector to help me with testing and troubleshot.
11. tuck in all the wires and, cover the sensors and places back to vehicle covers .
This unit works very well, it was easy to install. making sure you have a good ground spot is very important.


The wiring worked well on my Audi Q5.
online video was a great help.


I installed the ZCI Circuit Protected Harness in my 2020 Bolt EV. It works as advertised. With a little searching YouTube and chevy Bolt EV forums I located the correct wires. I can confirm that your kit works on my vehicle.


This wiring harness never worked correctly. I had two mechanics communicated with etrailer on diagrams. This was a total waste of money for my 2003 Jaguar XJ sport. I am very disappointed. I actually sold the car because I was so frustrated that I could not pull my trailer.


This product is difficult to install on modern thin gauge wiring.
Once installed it produces unreliable and erratic lighting patterns
I suggest you find an alternative product for your wiring harness needs

Etrailer Expert

Jenny N.


I see that you had reached out to our Customer Service team and we are working with you in regards to the warranty on the harness.


Horrible packaging, this appears to be a return that was simply re-shipped to me. Several areas of the hitch were damaged due to banging up against each other in the box. The box was not stapled, and the parts were not secure within. Although structurally no a problem the areas that are damaged down to bare metal will rust.

Etrailer Expert

Jenny N.


It certainly sounds like that the delivery was rough with this order. I know our shipping department does their best to ship so that the orders arrive in good condition. I will have our Customer Service department reach out to you.


good product,works well for my application.only down side is i have to keep the power wire switched off when not in use so i don't kill the battery.


It works fine except the running lights remain lit while stopped. Have to unplug while we camp overnight. Otherwise it works as stated.


The first three wiring harness that i got did not work with my 2020 ecosport the the company was not aware of the problem they were wonderful in helping me correct the issue with a different style harness. I will shop with them again.



No problems at all


The trailer hitch is great and went on easily. The trailer light harness doesn't work very well with Mercedes because the wires are incredibly thin and rattle around in the pickups. I did a lot of research on this and what etrailer sells is probably the best option even though it isn't optimal. All and all, a satisfied customer.


Product worked exactly as advertised. Was pleased with the installation instructions and the overall quality. The wiring was simple yet it took quite a while to integrate into my Audi Q7. It all worked and runs my double-axle boat trailer lights perfectly.


This unit needed to be programmed, it was not difficult. The issue is it loses it's marbles. every time I leave it hooked up, unattended, like for a fuel stop, when I come back out the parking lights are on , on the trailer only, or the brake lights are on, trailer only. the car is shut off and keys are out of it when it happens. Every time this happens you have to "re learn it". It was difficult to install on my car and I only use it once per year to tow with for vacation so I decided to live with it.


The trailer hitch and wiring assembly have worked flawlessly. After calling several local installation outfits and receiving estimates of $2,000+ I decided to install myself. I have a little mechanical experience but this was the first hitch and wiring harness for me. This is my wife's X5 so I was a little nervous about popping rivets and pulling the rear bumper cover off, but eTrailer has excellent step by step video instructions by model year. The order included replacement rivets and detailed instructions. They could not have made this any easier. I really took my time and completed the job in about 5 hours. The final install looks professional and clean. The no-splice wiring harness is amazing - worth every penny.

Tools: I was able to easily pop off the existing plastics rivets, and installed the new rivets (included from eTrailer) with pliers pretty easily - you may want to borrow a plastic rivet gun from your local hardware or auto parts store. On the X5 your have to cut a small notch out of the underside of the bumper cover. I happen to have a Dremmel which worked well. You may be able to use a razor blade. The plastic is not that thick.

Pictures are attached.

Thanks etrailer!


This product worked as expected. The more useful information to readers may be that I installed this on a 2013 Audi Q5. I tapped into the wires and power source in the passenger rear panel. Most installation information including the video here on etrailer tell you to tap the wires in the rear hatch. This is a sloppy difficult way to do it and unnecessary. Good luck.


Works but for the unit’s sensitivity to perceived power to Tesla’s LED’s has the unit falsing to ‘on’ with its run light. That’s just OK of course. The latest (2023) change (Tesla moving to 16V Li-ion battery as standard) will be a good test for this Tekonsha product. ie any replacement of the cars’ 12V lead/acid battery will be 16V Lithium ion now. Please keep abreast of advances. Thank you.


2012 VW GTI (autobahn edition) Installation (DSG)

I had some small issues and hiccups along the way, so in order help out since I couldn't seem to find vehicle specific help, here is what I did. I did buy the CURT 4-way flat connector tester (Item #126) first to make my life easier when testing. It helps. Buy it.

First - start by removing the cargo floor carpet and pulling down the drivers side wall carpet. I did find it necessary to take the moulding trim off the top portion of where the hatch cover locks in, along with the rear seat belt guide trim so I could run the wires to the battery cleanly. There is a few star bolts holding the trim alongside the rear seats when folded down, so just do a search if can’t find it (one cover has to be popped off)

Second - Wiring. This was a little bit of a guess, as I have 3 wires, and my meter didn’t seem to be helpful since they were so small and close together. Here’s what works (drivers side):

- “Stop” module clips over the black/red wire
- Middle brown wire isn’t used
- “Left” turn signal module clips over the green/black wire
- Passenger side right turn signal clips over the green/black wire
- I screwed the ground right into a side structure panel

Running the battery cable was the bigger time suck.
- Stated above I had the drivers side rear panel trim and carpet removed, and I continued removing the front/rear drivers floor sill trim. I ran the black wire along the current loom and tucked it under the floor carpet.
- I then ran it behind the hood latch and towards the top of the metal foot rest, keeping it behind the carpet
- This is where you get to the firewall. There is a piece of foam. Remove it. Now you’ll see a rubber grommet where the clutch pedal would go through if you have a standard. I took that out, drilled a small hole to run the wire through that I attached the wire to a metal hanger to fish up and to the right of the battery box. Fish it up, grab it, and pull it through.
- Slide the grommet back into place (your wire would have been already through it) and snap it on.
- Make your connection to the battery and follow initiation instructions.


This kit works perfectly! A reasonably straightforward installation, though not for a DYI'er who is uncomfortable ripping into the trim and lighting wiring harness of their vehicle. A reasonably accurate wiring diagram is very helpful, but not necessary because trial and error works well with Hall sensors used in this kit (i.e. no cutting and splicing wire is required).

Once installed, the trailer lighting load is easily handled by the power module without feedback to the vehicle lighting control circuit, although my setup does not interface with a trailer brake controller so I cannot judge full performance.

One hint - do not loose the heavy stock reference card that reminds one of the programming routine, While performing other electrical work on my car needing battery disconnection, I can never remember the programming sequence for the trailer lighting controller. Not to worry, though, the product support site has the info.


Installed on 2018 Jeep Grand Cherokee Limited with no tow package. Install was kind of a P.I.T.A. But worth doing on your own to avoid the stealership. Not too much electrical knowhow required, as the black wire on Jeep tail lights are all ground. Running the power cable was the most difficult part, and required removing the interior rear quarter panel, which I managed to break a plastic clip. Would not recommend this on a Jeep, as there is no simple way to install this on the interior of the vehicle since the tail lights are wired 100% outside of the car. I’d say skip if you are looking into this for a Jeep, and wait for an OEM trailer harness to come out from mopar.


Second hitch from etrailer, now for my new X5 F15. It’s perfectly fit this car, I like Curt brand better, no bumper trimming was needed for 2015 model. With great video of how to install it it takes just about 2 hours to do it properly.
Thank you for having also 4 pin wiring for this car, as other option would only be buying from the dealer at a huge price.


I haven't yet installed the wiring but i was kept well informed during the purchasing and shipping process. This will go into a 2017 BMW X5. The video on this site is excellent.


The Tekonsha wiring harness was a bit difficult to install, as the clip-on connections are a somewhat bulky to fit in my Tesla Model 3's tight spaces. The good news is: they work as promised like a charm with our tiny camp trailer's lights. In truth, I have only had to use them once, but cannot imagine that any unforeseen problems would occur with them in the future.


The hitch was so easy to install. No need to removed any wires, heat shield, or under carriage black plastic boxes on a base 2014 BMW 328d. Just the plastic bumper then the metal bumper. Boom done.

Now the wiring was a little different, but the hardest part was programming the module. Make sure you put the tail lights back in your car, lock unlock and lock again. Then start the car and program the lights. Only works when your car thinks it has bulbs, so if its blinking super fast on a turn signal... it won't work. I connected all of my wire sensors on the right rear side, you have access to both left and right taillight wiring and there's a vent big enough to slide the harness cables through. Figured that out after I taped everything up, but I simply unwrapped the cords and hid the wires completely. I then programmed the module and success. The whole thing took about 5 hours for me. The absolute hardest part that took 2 hours was putting the bumper cover back on, 2 holes in the wheel well and 3 under on the sides right next to the wheel didn't line up without some force, I did get rear ended at low speed, just hope the new bumper goes on easier.

Thank you etrailer, I provided a picture how I did the wiring on right side.


Excellent setup, installed on my 2019 tesla model 3, and I have had zero issues.

I have ordered a few items over the years from Etrailer and they are still functioning flawlessly today. Customer for life. Thanks again Etrailer


I used it on a 2017 Chevy bolt (think Chevy discurages people from installing a trailer hitch) since it did not come with any trailer hook up instructions. I think it gave my instaler a work out since he never did one before, but despite the cost I think it was the right way to go instead off cutting into wires etc. I dont use a trailer that much, but it has worked absolutely fine. Only problem has been that I think installer disturbed a wire hook up to a parking light (that is only needed-if lift gate is open) so he has not gotten around fixing that since he has to get into the trunk inards to do it.



Nothing has changed. I dont use it often but it continues to work, and installer has still not fixed the disturbed wire, since it requires taking trunk panels out to get to wiring.


Excellent. Everything I needed and saved me hundreds over having it installed. Will use again, highly recommended.

Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

  • Recommended Trailer Wiring Harness For 2007 Audi A4 Sedan
    For a universal option of a wiring harness for your 2007 Audi A4 Sedan, I recommend the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT. This kit will come with everything you need connect using its zero-contact-interface sensors to capture the signal from your factory wires without splicing into them. It will use a power wire directly from your battery to protect your factory wiring from overload. I've attached an article...
    view full answer...
  • Converter Needed to Change 3 Wire System on Vehicle to 2 Wire System for Trailer
    What you will need to use is the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness With the Install Kit # 119250KIT. This will allow you to change the 3 wire system from your tow vehicle to the 2 wire system that your trailer uses. You will need to run the included black wire up to your battery to power the converter. The great thing about this is that the lights on your trailer will have a more direct connection to your vehicle's battery which will result in the lights being a little...
    view full answer...
  • Wiring Harness Recommendation For 2020 Audi Q5
    You are correct when you say there are not any plug and play wiring available for the 2020 Audi Q5 at this time. I recommend to use the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit part # 119250KIT on the Audi. The ZCI uses clamps to clamp to the vehicle wiring instead of splicing into it since there is not a plug and play option available for you this it he next best option. I have attached an installation video on an Audi Q5 for your...
    view full answer...
  • Troubleshooting Lights Staying On After Installing Tekonsha ZCI Vehicle Wiring Harness on RAV4
    The Tekonsha ZCI Vehicle Wiring Harness # 119250KIT that you installed on your 2019 Toyota RAV4 can be extremely sensitive with regards to the initial setup. Because it uses zero-contact sensors to identify current flowing through each wire, all the steps need to be followed exactly as written in the install manual. If the lights are staying on after initially activating them then this could be an indication that the magnetic sensors were simply installed in the wrong direction. Try pulling...
    view full answer...
  • How Does Trailer Wiring Work on Tow Vehicle that Has Separate Turn Signals from Stoplights
    The trailer lighting configuration you mentioned is very common. The solution is to use a taillight signal converter like the part # 119250KIT which is designed to accomodate this style and adapt it as needed. If you get me the year/make/model of your vehicle I can see if there's a custom fit harness available that wouldn't require any hardwiring.
    view full answer...
  • Towing Capacity of 2015 Mercedes-Benz GLK Class
    According to the owner's manual for your 2015 Mercedes-Bens GLK 350 4 Matic, the towing capacity is listed as 3500 lbs, which shouldn't be a problem, but the maximum trailer tongue weight is listed as 280 lbs which is considerably less than the 380 lb tongue weight you mentioned which means I wouldn't recommend towing it as it sits. If you could reduce the tongue weight by 100 lbs, bringing the tongue weight of the trailer below 280 lbs, you'd be fine towing the trailer, but I can't recommend...
    view full answer...
  • 2018 Hyundai Kona Trailer Wiring Recommendation
    For trailer wiring for your 2018 Hyundai Kona the ZCI kit part # 119250KIT is what you'll want. This is compatible with the LED lights the vehicle has and also it installs without requiring you to splice into or cut any vehicle wiring.
    view full answer...
  • What Types of Trailers Work with the ZCI Circuit Protected Vehicle Wiring Harness
    The ZCI Circuit Protected Vehicle Wiring Harness part # 119250KIT will work on any trailer which uses a 4-way flat trailer connector which is the most common type. It doesn't matter what type of lights the trailer has whether it's incandescent or LED. It also does not matter how many lights the trailer has within reason. The only compatibility concerns you should have would be on the vehicle side but if you can let me know the year, make, and model of the vehicle I would be glad to confirm...
    view full answer...
    Image 1 for
  • Troubleshooting Turn Signal and Brake Lights On ZCI 119250KIT Not Working On 2017 Mercedes-Benz C300
    There are a few possible causes to why the brake and turn signal functions of the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT are not working on your 2017 Mercedes Benz C300. First make sure that the driver and passenger side connectors are installed to the correct wire and that the arrow on the connector is pointing towards the light. Using the included circuit tester while the turn signals are on will allow you to confirm the correct wire. Next if it is still not working...
    view full answer...
  • Will Tow Ready ZCI Trailer Wiring Harness Fit a 2016 Lexus RX 350
    There are two great things about the ZCI Trailer Wiring Harness part # 119250KIT that you referenced. Most importantly is that due to it's universal design it can basically fit any vehicle on the market. So it will fit your 2016 Lexus RX 350. The other really nice thing is that it doesn't require any cutting or splicing into the vehicle's trailer wiring harnesses so it's an easy install as well.
    view full answer...
  • Connecting Wires of ZCI Trailer Wiring Kit to 2013 Audi A6
    Your 2013 Audi A6 has trailer wiring circuits that are combined what use pulse width modulation on the same wire. So according to Tekonsha when you install the # 119250KIT you need to attach the yellow wire of the kit to the brake/tail/left turn wire on the vehicle and the green to the brake/tail/right turn wire. The brown and red wires of the kit are not used.
    view full answer...
  • Wiring Harness for 2004 Mercedes-Benz E500 Wagon w/ W211 Chassis
    For your 2004 Mercedes-Benz E500 Wagon with the W2011 chassis, you can use the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness and Installation Kit # 119250KIT. This is a universal harness that is confirmed to fit your vehicle. Installation does not require any cutting, splicing or plugging into your vehicle's wiring. The sensors will simply clamp onto the wires of your factory tail light wiring harness to detect current. A circuit tester is also included to ensure proper setup. I...
    view full answer...
  • Does ZCI Trailer Wiring Kit # 119250KIT Fit 2014 Mercedes E350 4Matic Wagon
    The trailer wiring kit part # 119250KIT is designed to accomodate all vehicle wiring styles so yes it is a fit for your 2014 Mercedes E-350 wagon. The key is determining which style of taillights your vehicle has and using the chart in the instructions that shows how to wire in the kit. I attached a picture that shows this.
    view full answer...
    Image 1 for
  • 2023 Tesla Model Y Correct Trailer Wiring Harness
    Yes, the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT will work with your 2023 Tesla Model Y and it does come with a converter. I don't know why our site lists it like that but we are changing it to be more accurate. The converter and module are built into the bigger black box that all of the wiring is connected to, and since this is specially designed to protect vehicle wiring it's perfect for all electric vehicles like your Model Y.
    view full answer...
  • Wiring Harness w/ a 4-Flat Vehicle Connector for a 2022 GMC Terrain
    For your 2022 GMC Terrain without the factory tow package you will want the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness with Installation Kit # 119250KIT. This universal wiring harness connects to your existing wires behind the rear tail lights without requiring splicing. It provides you with a 4-flat vehicle connector to control your trailer's lighting functions.
    view full answer...
  • Recommended Wiring Harness For 1976 Toyota Land Cruiser 4-Way Trailer Connection
    There is not a specific custom wiring harness for your 1976 Toyota FJ40 Land Cruiser. I recommend using the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT which will install without cutting and splicing and will work well for your application.
    view full answer...
  • Troubleshooting Wiring Harness on a 2001 BMW X5 Where Brake Lights Wont Work with Running Lights
    Multiplex wiring like on your 2001 BMW X5 can get pretty confusing. A lot of times there are multiple wires that have multiple functions so it's best to test every wire for each function. I've linked a video of the # 119250KIT wiring harness being installed on a 2013 X5 and you can see where the installer finds two wires each have both the brake and the running lights signals on them. However, the voltage is different one having higher voltage for the brakes and the other a higher voltage...
    view full answer...
  • How To Find The Correct Brake Light Wire On 2014 Audi A4 For ZCI Wiring Harness 119250KIT
    You are correct, for some reason the video of the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT being installed does not show the stop light connector being connected on your 2014 Audi A4 but since your vehicle has separate wiring it does need to be connected. What you will need to do is use the included circuit tester to check the wires going to your tail light while a friend applies the brakes in your A4. Once you find the correct wire you will connect the stop light connector...
    view full answer...
  • Does 2011 Toyota Land Cruiser Have Trailer Wiring?
    Your 2011 Toyota Land Cruiser may have a tow package and the best way to find this is to simply call your local Toyota dealer with your VIN and ask. If you do not then you can add a 4-way with a universal kit, the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness with Install Kit # 119250KIT. This installs without splicing wires, but does require the use of a circuit tester. This process is something some people feel comfortable doing themselves while others take it to a local mechanic...
    view full answer...
  • Will Tekonsha Trailer Wiring Harness 119250KIT Fit 2017 BMW X5
    The Tekonsha Vehicle Wiring Harness, part # 119250KIT is confirmed as a fit for your 2017 X5. This harness comes with the harness, converter, hardware, and a circuit tester to help locate the appropriate wires. I have attached a link to an installation video for this harness you can check out.
    view full answer...
  • Recommended Trailer Wiring Harness For 2017 Honda Ridgeline
    The only harness I can offer you as a fit for your vehicle is the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit, # 119250KIT. This harness can be attached without splicing any wires. You just run a lead wire to the battery and then the sensors clamp onto the wires of your factory tail light wiring harness to detect current. It is easily removable and transferrable beween different vehicles. I've attached a couple videos for you of...
    view full answer...
  • 4-Way Connector Compatible With Honda Gold Wing and Trailer With LED Lighting
    The correct kit for your Honda Gold Wing to connect to your trailer with LED lights is the Tekonsha ZCI Circuit Protected ModuLite with 4 Pole Harness and Hardwire Kit # 119250KIT. You will need this kit because your Gold Wing has the stop light function separate from the turn signals, or what is called a 3-wire system. This kit will adapt your Honda's 3-wire system to work with your trailer's 2-wire system. Additionally, it is compatible with LED lights on your trailer so there will be...
    view full answer...
  • Recommended Zero Contact Interface Wiring Harness for 2015 Mercedes-Benz 250 Blue Tech
    For your 2015 Mercedes-Benz GLK 250, the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT is what you are seeking. This wiring harness utilizes a technology called zero contact interface using sensors to capture the signal sent through the vehicle wiring without penetrating the wiring insulation. It draws power directly from your vehicle battery and sends the captured signal to your trailer wiring. I've attached a...
    view full answer...
  • Can Power Wire for 2016 Porsche Cayenne Trailer Wiring Harness be Attached to 12 Volt Outlet
    We get this question a lot so I know where you're coming from. But trailer wiring harness manufacturers design the powered converters such as # 119250KIT so that they draw 12-volt power directly from the vehicle battery for a very good reason. Doing so keeps the vehicle wiring fully isolated from the wiring of the trailer. Short circuits in trailer wiring are very common, keeping the trailer wiring isolated from the vehicle will help prevent the wiring in your 2016 Porsche Cayenne from...
    view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Randy B
Test Fit:
Randy B
Employee Andrew S
Test Fit:
Andrew S
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Conner L
Test Fit:
Conner L
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Victoria B
Expert Research:
Victoria B
Employee Zack K
Video by:
Zack K
Employee Andrew K
Video by:
Andrew K
Employee Kathleen M
Video by:
Kathleen M
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Michael B
Video by:
Michael B
Employee Thomas T
Video by:
Thomas T
Employee Schuyler H
Video by:
Schuyler H
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Amanda M
Written by:
Amanda M

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924