bing tracking image
  1. E Track
  2. Erickson
  3. E Track Rails
  4. Vertical
  5. 4 Feet Long
  6. 3-1/2 Inch Wide
Erickson Vertical E Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1
Erickson

Erickson Vertical E Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1

Part Number: E19146
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$26.51
Retail:$29.30
You Save: 10%
E Track
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
4' E track with vertical slots is perfect for installation in truck or trailer beds or on enclosed trailer walls. Multiple slots for securing E track straps and tie-down anchors. Bolt-on installation (hardware not included). 6,000 lbs Max load. 1-800-940-8924 to order Erickson e track part number E19146 or order online at etrailer.com. Free expert support on all Erickson products. Great prices and Fastest Shipping for Erickson Vertical E Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1. E Track reviews from real customers.
  • All Info
  • Reviews (1177)
  • Q & A (0)
  • Photos

Erickson E Track - E19146

  • E Track Rails
  • Vertical
  • 4 Feet Long
  • Erickson
  • 3-1/2 Inch Wide

4' E track with vertical slots is perfect for installation in truck or trailer beds or on enclosed trailer walls. Multiple slots for securing E track straps and tie-down anchors. Bolt-on installation (hardware not included). 6,000 lbs Max load.


Features:

  • E track provides tie-down points for securing cargo in your trailer, truck, or van
    • For use with E track straps and anchors (sold separately)
  • 4' Section with multiple anchor slots is ideal for truck or trailer beds and enclosed trailer walls
  • Vertical slots are designed for wall or floor mounting
  • 12-Gauge steel contruction is zinc plated for corrosion resistance
  • Requires screws or rivets (not included) for bolt-on installation


Specs:

  • Dimensions: 4' long x 3-1/2" wide x 1/2" tall
  • Safe working load limit (WLL): 2,000 lbs
  • Maximum load (break strength): 6,000 lbs
  • Diameter of mounting holes: 1/4"
  • Mounting hole spacing: 2"
  • 90-Day limited warranty


Dimensions

Notes:

  • It is recommended that you use a backing plate (sold separately) every 12" for best results.
  • Use all mounting holes on this E Track for optimal installation.


19146 Erickson Manufacturing Veritcal E-Track Trailer Cargo Control - 4-Foot Piece





Customer Satisfaction Score:


Customer Reviews

Erickson Vertical E Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1 - E19146

Average Customer Rating:  4.9 out of 5 stars   (1177 Customer Reviews)

4' E track with vertical slots is perfect for installation in truck or trailer beds or on enclosed trailer walls. Multiple slots for securing E track straps and tie-down anchors. Bolt-on installation (hardware not included). 6,000 lbs Max load.

by:

I received the products just as described it too about 4 working days.
I plan on building shelves into my enclosed trailer for camping gear.

Brad B. profile picture

Brad B.

11/14/2014

Well I love the tracks you can do so much with if you do not own any your missing the boat here. I have them in the trailer and they work like a dream. You have lots of adjustments with them.



by:

I installed this track in a horizontal fashion on the side wall all the way around the inside of my trailer. This allows me to secure any size and shape load to the the wall of the trailer as opposed to just trying to tie it off over the top, much more secure and adaptable than just using the tie offs on the outside of the trailer. It was easy to install and is a snap to use.



by:

As requested, here are some pics of my e-track installation. I find the raised e-tracks in the floor very problematic and dangerous so I made sure they were recessed. This is now an extremely versatile cargo trailer.



by:

Great quality, easy installation, made adding shelves to my trailer a breeze. I screwed them into 3/4 inch plywood, instead of the trailer framing, which reduces the weight capacity, however, i'm not storing anything NEAR what these shelves can hold. Everything's screwed together, and the shelves are removable/adjustable. (I have no experience with this type of project.



by:

Great item. Made a bed in my trailer.

Branden profile picture

Branden

4/17/2015

haha thats awesome I was thinking of doing that exact same thing.. work well and stable??

Darrin A. profile picture

Darrin A.

5/8/2015

This setup works great and is very stable. Has held me and my wife comfortably. Put a futon mattress on top!



by:

Great product, easy to install. I used a 2nd section as a backing plate on our Aluma TK1 trike trailer, with 1/4 inch galvanized bolts, every 3-4 holes. fast shipping, great pricing.



by:

Received my vertical E track along with my spare tire holder and installed it last night in temperatures that dip down to 9 degrees ! to say the least installed it in record time.
Had no issues with either product I gave both products a five star rating.



by:

Perfect for adjustable shelving or other items you want to move up and down in your garage or enclosed trailer! I even used them to make a barrier in my tool trailer to keep things in place.



by:

I have an enclosed trailer and needed some way to secure items to the sides. This product is just the right thing for this. I have used these to secure items and they work great. Highly recommend this product.



by:

Well made vertical support to secure items to the trailer wall.



by:

Works great when vertical strapping is needed and space is tight!



by:

I haul live bait on a galvanized trailer. The e-track system is ideal for my application. The salt water doesn't affect anything and works great. I also use it to secure UTVS. I couldn't be more happy with the products and the service.



by:

Nice, strong construction of the chocks, but the paint doesn't seem durable. Rachets and track appear to be good quality



by:

I totally love E-Trac !! Where would I be without them ?? Totally flexible and versatile!!



by:

I mounted this vertical E-Track to the steel stud on the front inside wall of my trailer. It holds my spare tire up and out of the way very nicely. It also provides an additional place to hook my straps. The steel stud isn't very wide, so I was only able to use the mounting holes on one side of the track, and I mounted it on top of the paneling, and it's holding up very well!



by:

This is an excellent product. It was perfectly suited to what I wanted to do. See attached picture.



by:

Installed the vertical e track. Only issue I had was that the track installation holes are spaced further apart than the trailer frame is wide. Fixed the issue by using short screws to install track over frame into the plywood, than drilling holes in order to use longer screws to go thru plywood into metal framework. Loaded the trailer, strapped everything in, and drove 350 miles to the jobsite. Everything was secure upon arrival. Product worked well.



by:

I purchased the vertical tracks to be used with the storage hooks. Installation was very straight forward and I have eliminated various articles previously on the floor and are now carefully organized on the trailer wall by using the above system. Overall I am very satisfied and feel they accomplished their purpose.



by:

Just received the E-Track chocks for my cargo trailer. They were back ordered but everything else I ordered arrived quickly and in good shape. The chocks took a little while but the communication was very good from Cathy T. at etrailer, the customer service is outstanding.



by:

It is E-Trac what more can I say than it does what is designed to do.



by:

Etrailer supplied the equipment I needed at a great price and shipped the the northwest coast with on days from when I placed the order.
All the e-track hardware and equipment was in stock and arrived packaged very well with no shipping damage.
The e-track is heavy duty, much more than I had expected and it was easy to install.
Looking forward to upgrading my trailer even more from etrailer.

Thanks again!



by:

I ordered some E-Track and d-rings for said track from etrailer. The customer service was excellent and the product arrived within 4 days, even though I only used standard shipping. The track and rings are high quality (although I'd prefer they weren't made in China), and the customer service from etrailer was awesome. I will definitely use them for future needs.



by:

Worked great. Easy to install. Sturdy. Made it so we could make an adjustable height queen mattress bed frame in the trailer and store bigger things under the bed if necessary.



by:

Modified this cargo trailer to haul RC airplanes(too big to fit in my pickup) and remove the upper deck to make it useful for hauling other items. This makes a truly utility cargo trailer. Numerous tie downs with Etrack is really great. I have other pics if your interested. I just purchased an enclosed car hauler and I plan on installing Etrack in it. Thanks for making great products !



by:

Good quality product. Thats why I shop etrailer because they wont sell something they dont believe to be of good quality and function. In house testing of the product before it's on the site save us customers the headache of failed products, returns & replacement. One year follow ups with their customers helps this too. Excellent Service reliable products & instructional videos.


25
1107
Show More Reviews

See what our Experts say about this Erickson E Track

  • E Track Trailer Cargo Control # E19148 Mounting Location for Securing a Harley In Enclosed Trailer
    I would recommend that you run the tracks horizontally, that way you could secure your Harley from multiple points around the bike to the E-Track Trailer Cargo Control - Horizontal - 5 Foot Long, part # E19148. I included a link to a video review of this product below for you to check out. I would also recommend using a E-Track 2 inch D-Ring, 3.5K, part # E59143, to make securing your bike with straps easier. I have included a link below to a video of the # E59143 on a horizontal # E19148. The...
    view full answer...
  • Will Spare Tire Rack # RA-16 Hold Two 225/75-15 Tires in a 24ft Enclosed Trailer
    Your 225/75-15 tires should be slightly over 28-9/32 inches in diameter, so combined you would be looking at about 56-19/32 inches in order to clear both tires. I spoke with my contact at Rack'Em, and the # RA-16 spare tire rack has an overall length of 49 inches, but the E-track portion of the rack is only 25-1/2 inches long. Even with one tire in the top slot and the other in the bottom slot, you would still be a few inches short of fitting both tires on the rack. If your trailer...
    view full answer...
  • What is the Finish on the E-Track
    The E-Track # E19146 that you referenced is galvanized to resist corrosion. I attached an install video for this product for you to check out also.
    view full answer...
  • Mounting the Erickson Vertical E-Track to the Side Wall of an Enclosed Trailer
    When mounting vertical e-track, like # E19146, the type of hardware used will depend on what the material of the surface is made of that you are mounting the e-track on. If you are mounting tracks on a standard plywood surface then you could you 1/4 inch wood screws. However, if the surface you're working with is sheet metal, then you would need to use a fastener that is rated for use on metal surfaces. The e-tracks do not come with hardware because of the different possibilities of...
    view full answer...
  • Differences Between Horizontal and Vertical Erickson E-Tracks
    Erickson E-Tracks are offered in various lengths and for either horizontal or vertical installation on your trailer's deck or interior walls. An example of a vertical E-Track is part # E19146 and examples of a horizontal track are part # EM59150 and part # EM19147 that you referenced. You'll notice that the direction of the slots does differ. You will want to use 2 fasteners minimum per linear foot of track. Use fasteners on both sides of the track. So for example, a 2-foot track section...
    view full answer...
  • Can You Build a Bed With the Erickson Vertical E-Tracks and Move It Up and Down
    It is indeed possible to build a bed using the Erickson Vertical E-Tracks like part # E19146 for example. In order to do so you will need some brackets like the CargoSmart Shelf Brackets part # 3481726 or CargoSmart Board Holder part # 348892 and some lumber. That said, you would not be able to move the bed up and down as a whole. If you did not attach the bed to the bracket then you could so in only a few pieces but since the bed would be pinned between the tracks you couldn't lift it...
    view full answer...
  • Horizontal or Vertical E-Track for the Floor of an Enclosed Trailer
    For the floor of your enclosed trailer the most popular setup would be the horizontal E-tracks like part # E19148 which is a 5-foot section. Typically the vertical sections like part # E19146 are used on the walls of a trailer and not the floor.
    view full answer...
  • What Tie Downs O-Track Or E-Track For Enclosed Trailer Hauling Harley Bagger
    Any of the trailer cargo control systems are only going to be as strong as what surface they are anchored to and how they are attached to that surface. The Erickson O-Track Cargo Control, # EM59133 mounts by drilling holes through the trailer floor or walls and attaching to the backing plate on the other side of the floor or wall to give it the strength. The capacity per track is 733 lbs straight pull or 583 lbs side pull. Two tracks with 4 anchors would give you almost 1500 lbs of capacity...
    view full answer...
  • Does the E-Track Wood Beam Socket # 59149 Have a Weight Capacity
    The E-Track Wood Beam Socket # 59149 that you referenced doesn't have a capacity listed for it because the wood installed in it would break long before it would. To install the vertical E-track sections like the 4 foot section part # E19146 you could use self-tapping screws. I attached an install video for this for you to check out as well.
    view full answer...
  • How to Mount E-Track Cargo Control System To Inside of Enclosed Trailer
    The Erickson E-Track Trailer Cargo Control tracks, # E19146, are intended to mount to the structural components of a trailer. These locations provide the most secure mounting to ensure your cargo remains stable within your trailer during transport. Without a secure mounting location you will not be able to use the full 6000 pound working load limit provided by the tracks. So you will definitely want to secure the plywood to one of the structural components. The attached video may be helpful....
    view full answer...
  • Can I Use The Vertical E-Track E19146 In The Horizontal Position For My Covered Cargo Trailer
    My contact at Erickson confirmed that you are definitely able to use the Vertical E-Track # E19146 in the horizontal position. The advantage for you is that it will mount to the space you need it to fit. The only disadvantage of using the Vertical Track # E19146 is that there are less anchor points to hook into than the Horizontal E-Track, part # EM59150. To connect straps to the E-Track, you will need to use E-Track 2 Inch D-Ring, part # E59143. I have linked a video review of the D-ring...
    view full answer...
  • Is there a Recommend Height from the Floor E-Track Should be Mounted in a Trailer
    There isn't a specific height from the trailer floor recommended to mount the E-Track. My gut feeling is that if 3 feet is too low and 4 feet is too high then 3-1/2 feet might be perfect. Another option is to mount E-track pieces vertically along the walls of the trailer so you have more height adjustment (but less front to back adjustment). You would likely need at least 4 pieces of E-Track for this. You could use vertical E-Track # E19146. I have linked a video showing how we installed...
    view full answer...
  • Spare Tire Carrier Options for Cargo Trailer with 6 Inch Tall Frame
    Since we don't have any frame mount spare tire carriers that can mount to a 6 inch tall trailer frame, we will need to consider other possible mounting options for a spare tire carrier. If your cargo trailer is enclosed, you an use a mount like the Rackem Spare Tire Rack for Enclosed Trailers # RA-16. A similar option is the use a section of Vertical E-Track # E19146 with the Rackem Spare Tire Carrier for E-Track # RA-16HST. Either of these options will mount to the wall of the enclosed...
    view full answer...
  • Will RackEm Spare Tire Carrier for E-Track Work With 6-Lug Wheels
    I checked out our Expert answers and could not find a reference to limits on the wheel lugs the # RA-16HST would work with. As long as the pilot hole on your tire measures at least 2-15/16 inches diameter, your tire will fit over the end of the arm on the carrier. It uses only one of the wheel lug holes to hold the tire in place. I have attached a photo that shows this carrier being used with a wheel that has 6 lug holes you can check out. To be able to use this carrier you will need...
    view full answer...
    Image 1 for
  • Can Erickson E-Track Be Used on Exposed Deck of Open Utility Trailer
    Erickson E-Track Cargo Control items like # EM59150, # E19148 and # E19146 are not painted but rather they are given a zinc coating treatment to provide corrosion resistance since they are made of steel. These are perfectly suitable for use on the deck of an open trailer. Be sure to use appropriate non-corrosive galvanized hardware to install the tracks. No fewer than 2 fasteners per linear foot (on each side) are required.
    view full answer...
  • Parts Needed to Wire Brakes to Trailer
    As long as your 5 flat pin supplies brake signals from the brake controller you will be good to go. The purple (reverse) and black (12 volt) wires are not necessary and can be tied up out of the way. You will also need a 7 to 5 way adapter like # A75TB. Check out the video review of part # A75TB at right. A better option would be to replace the trailer connector with a 7-Way Molded Trailer Wire Connector like # H20042 and a trailer wiring junction box like # 38656. You will also need...
    view full answer...
  • E-Track Recommendation for 5 x 8 Haulmark Transport Deluxe Cargo Trailer
    The Erickson E-Track is very versatile so they isn't a specific size or model for your 5 x 8 Haulmark Transport Deluxe Cargo Trailer, just install as much or as little as you want, on the deck or on the wall. I have included a link to all of the E-Track tracks, as well as the accessories, for you. If this were my trailer, in order to accommodate a variety of different loads, I would install 2 of the 5 ft Long Horizontal E-Track, # E19148, on the deck of the trailer and 4 of the 4 ft Vertical...
    view full answer...
    Image 1 for
  • What Fasteners to Use to Secure Erickson E-Track to Trailer Interior
    Erickson E-Track should be secured to the mounting surface with no fewer than 2 fasteners per linear foot per side, so for example a 3-foot section would need no less than 8 fasteners. The type and length of fastener depends on the mounting surface more than anything else. The screws used should be either stainless or galvanized and they should be long enough to take full advantage of the depth of material at the mounting point. If you were install the tracks on 3/4-inch or 1-inch thick...
    view full answer...
  • What is the Difference Between a Vertical and Horizontal E-Track Including the Dimensions
    The main difference between the horizontal and vertical E-tracks is which way the slots on the bar run. The horizontal E-track cargo control like part # E19148 can be mounted horizontally on the wall or floor in an enclosed cargo or open trailer. It also creates several tie down points to secure loads. It is 5 feet long and has a overall width of 5-inches. The slots each have a length of 2.45-inches and a width of .58 inches. See diagram to the right. Additional lengths we offer are 2...
    view full answer...
    Image 1 for Image 2 for
  • Are Snap Loc and Erickson E-Track Components Compatible
    Yes, the Snap-Loc accessories are compatible with the Erickson E-Track Tracks like part # E19146 and # SLLS28CER. I have included a link to all of our E-Track tracks and accessories for you.
    view full answer...
  • Best Versatile Tie-Down Options for a Cargo Trailer
    I am not sure how many of the Erickson E-Track systems you have seen but it really is your best bet when it comes to versatility and functionality. Not only do they have the Horizontal E-Track, like part # E19148, but they also have Vertical E-Track like part # E19146. You could install both types of track on your cargo trailer (if it is enclosed) and then move the attachment points around by either using the Erickson E-Track Strap # EM59136 or using the Tie-Off w/ D-Ring # E59143 along...
    view full answer...
    Image 1 for Image 2 for
  • How Much Weight Can the E-Tracks Hold Attached To Plywood
    Yes, you can use wood screws to secure the e-tracks to the plywood walls in your trailer. However, as you mentioned the weight capacity would be less than if you were to attach them to metal beams. The tracks themselves can handle up to 2,000 lbs but the weight capacity of the system is always going to be limited to how they are attached. Unfortunately, there would be no way to give you specific figures or ratings when attached to plywood as there are just too many factors involved such...
    view full answer...
    Image 1 for
  • Is the Top Part of Rackem Spare Tire Rack for Enclosed Trailers Available By Itself
    The top part with the hook on the Spare Tire Rack for Enclosed Trailers, # RA-16, is not available as a separate part. A lot of customers who purchase this carrier also add some additional e-track like # E19146, perhaps for exactly the same reason.
    view full answer...
  • Can E-Track Install in Trailer Application Where One Side Only Attaches to Metal
    Your setup would be totally fine. Especially considering this is a bed application where the force will be straight down. Every third hole on the metal side and every other on the wood would be more than adequate and would be super solid.
    view full answer...


< Previous



Do you have a question about this E Track?


Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Chelsea B
Updated by:
Chelsea B
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924