bing tracking image
  1. E Track
  2. Erickson
  3. E Track Anchor
  4. 1200 lbs
Erickson E Track Tie-Off w/ D-Ring - 2" Wide x 8-1/4" Long - 1,200 lbs
Erickson

Erickson E Track Tie-Off w/ D-Ring - 2" Wide x 8-1/4" Long - 1,200 lbs

Part Number: E59143
In Stock
$10.78
Retail:$14.99
You Save: 28%
E Track
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Create a tie-down point for securing a cargo strap, rope, net, or tarp by snapping this fitting into your E-track anchor or rail. Steel attachment point and polyester strap are durable. 1-800-940-8924 to order Erickson e track part number E59143 or order online at etrailer.com. Free expert support on all Erickson products. Great prices and Fastest Shipping for Erickson E Track Tie-Off w/ D-Ring - 2" Wide x 8-1/4" Long - 1,200 lbs. E Track reviews from real customers.
  • All Info
  • Reviews (873)
  • Q & A (0)
  • Photos

Erickson E Track - E59143

  • E Track Anchor
  • 1200 lbs
  • Erickson

Create a tie-down point for securing a cargo strap, rope, net, or tarp by snapping this fitting into your E-track anchor or rail. Steel attachment point and polyester strap are durable.


Features:

  • Creates a tie-down point in your trailer for rope, cargo straps, net, or tarps
  • Clips easily into an E track anchor or rail (sold separately)
  • Constructed of durable steel and polyester webbing


Specs:

  • Strap dimensions: 6" long x 2" wide
  • D-ring dimensions: 2" wide x 1-1/2" tall
  • Maximum load (break strength): 3,500 lbs
  • Safe working load limit (WLL): 1,200 lbs


Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.



59143 E-Track 2" D-Ring, 3.5K





Customer Satisfaction Score:


Customer Reviews

Erickson E Track Tie-Off w/ D-Ring - 2" Wide x 8-1/4" Long - 1,200 lbs - E59143

Average Customer Rating:  4.9 out of 5 stars   (873 Customer Reviews)

Create a tie-down point for securing a cargo strap, rope, net, or tarp by snapping this fitting into your E-track anchor or rail. Steel attachment point and polyester strap are durable.

by:

This E-Track (and E-Track straps) was installed on the wall of my box trailer to secure a rolling took chest. It has performed flawlessly. Thanks again etrailer, for a great product.



by:

Work well great product



by:

I picked up 2 of these just for extra tie-points for our gear. Didn't really need this heavy duty. great prices and service from etrailer, fast shipping and well-packed boxes.



by:

Iam a very tidy person and everything has a place,and this product helps make that possible.



by:

my first time to install and use E-track and accessories and am very happy with the quality of the product. our cargo trailer is used for hauling mostly antiques and furniture we intend to use this tie off ring to connect our existing straps which do not have the required end track fittings.
the picture shows using new straps also purchased.

Bill H.

12/11/2017

everything is fine tie downs have worked well



by:

I purchased 6 of the above e-track extensions to complete my gear for my motorcycle trailer. This now allows me along with all my other gear to appropriately secure my motorcycles when transporting them across town or across country. I am very happy with this equipment. I will continue to check out entrails line of equipment and gear as needed. The complete process from ordering, paying and receiving product was painless.

Rhys

6/19/2021

Absolutely great. I still use them weekly hauling motorcycles, furniture and even a huge gun safe. They work just as designed and I’m glad I purchased 6 of them.



by:

good quality, well made



by:

Modified this cargo trailer to haul RC airplanes(too big to fit in my pickup) and remove the upper deck to make it useful for hauling other items. This makes a truly utility cargo trailer. Numerous tie downs with Etrack is really great. I have other pics if your interested. I just purchased an enclosed car hauler and I plan on installing Etrack in it. Thanks for making great products !



by:

Decked out my new cargo trailer with this e-track. Looks sweet! Heavy gauge construction. Easy installation. Along with the Erickson E-Track straps now I'm ready to haul just about anything safely and securely. Thanks etrailer!



by:

Works well for my application.



by:

Etrailer supplied the equipment I needed at a great price and shipped the the northwest coast with on days from when I placed the order.
All the e-track hardware and equipment was in stock and arrived packaged very well with no shipping damage.
The e-track is heavy duty, much more than I had expected and it was easy to install.
Looking forward to upgrading my trailer even more from etrailer.

Thanks again!



by:

Excellent product! I bought 2 of the 4-ft e-tracks. These are heavier duty than I thought they would be. They are extremely practical for my 10' wood floored utility trailer. If you are like me, there aren't many good tie down points on wood bottomed trailers. These are an easy fix for a host of applications. They work great for having multiple points to tie down my 4-wheeler or lawnmower. I will definitely recommend! The only better would have been free shipping.



by:

pretty sweet man put a good dip in and crack a cold one



by:

Solid construction and strong as h*ll. I use these on everything I want to tie down on any of the tracks I have in place.



by:

Very nice for being able to use normal store brand tie down straps with the Etrack system. Everything seems really well built and more than capable of handling its load rating.



by:

These track tie offs exceeded my expectations. I have use a flimsier type on the past but when we installed these yesterday into our bands trailer, replacing the old tie offs, you can immediately see the difference in quality of both the stitching of the cloth and the weight of the metal. I'm ordering more today



by:

Product was perfect--big help in organizing my trailer

Scott S.

3/5/2018

eveything is good!



by:

Provides flexibility in securing cargo inside trailer. Well made product. Good value.



by:

Great quality and workmanship. Love the e-track system and all of the versatile ways it can be used. Exceptional customer service is the standard here. I will always go to etrailer.com for my trailer needs!



by:

E-track "D" rings are exactly as advertised. Good quality and work wonderfully.



by:

This strap is made of quality material and is easy to install in the e-track. The strap is a must with the e-track and worked fine to secure my cargo.



by:

etrack and d'rings arrived 2 days before schedule...a very welcome surprise! Products were shipped as advertised and are perfect for securing cargo. Will order again from etailer!



by:

Looks strong, will work for my applicat ion.

Chip F.

8/12/2017

Has worked out well, dont foresee any issues for this part.



by:

really helps the hard to tiedown cargo

Bgc

12/3/2016

Works great adjusts to my needs.



by:

E-Track is very well engineered, small yet strong and works anywhere along the horizontal E Track system.


25
848
Show More Reviews

See what our Experts say about this Erickson E Track

  • Recommended Tie-Downs to Secure Newer Mustangs with Limited Wheel Well Clearance to Trailer
    To safely secure your 2018 Mustang Saleen and GT500 I recommend using the Erickson E-Track Wheel Tie-Down Strap # EM58523. This ratcheting tire strap is a perfect solution for your application since it will only touch the tread on the tire and the ratchet can be positioned out of the way from the vehicle on the E-track. To use the ratchet straps you will just need to install some E-tracks like the 5 Foot Long # E19148. These are available in shorter and longer lengths as well so I have...
    view full answer...
    Image 1 for
  • Backing Plate Recommendation for E-Track for Securing Track to Wood Floor Trailer
    The E-Track like part # E19148 that you referenced has a capacity of 2,000 lbs so it would do well securing a 2,500 lb trailer at 4 points as each track would have 1/2 the weight. I would recommend you use backing plates below the floor of your trailer like part # e96RR since your tractor is pretty heavy and the floor of your trailer is wood. For D-Rings to install in the track you would want the part # E59143 so that you could use a ratchet strap like the # EM01314.
    view full answer...
  • Tire Tie Downs for E-Track in an Enclosed Trailer for a Sports Car
    For your trailer the tracks have openings that go front to back. To secure vehicle tires you would need the openings to run left to right like # E19148. Then you could use # 77314 which has e-track fittings. But we can make it work by using a couple of tie downs, # E59143, and ratchet straps such as # EM34416. If a vehicle has smaller or larger tires you would just place the tie downs in the appropriate spots on the tracks. Vehicles that are wider or narrower may still work on the same...
    view full answer...
    Image 1 for
  • Securing a Jeep Wrangler with 35 Inch Tall, 12-1/2 Inch Wide Tires to E-Track
    The E-track tire strap # EM58523 is 12 feet long so it would fit. You could also use an E-track D-ring # E59143 witch an axle strap, # 58505, and ratchet strap # 58503. The D-Ring will attach to the E-track. The axle strap will loop around the Jeep axle, and the ratchet strap will hook to the D-Ring and the loops on the axle strap.
    view full answer...
  • Should the Tires Sit on Top of the E-Track System When Installed in a Trailer
    The E-track system can install any way you would like on your trailer. It is common to install the E-Tracks so the wheels of a vehicle are on top of the E-track. This allows you to use wheel nets, like part # EM58523, that attach directly to the E-track system. Many wheel nets typically have only one hook in front of the tire and one hook behind the tire. Installing the E-track system so the wheels are on top of the track rather than on the side provides more stability when transporting...
    view full answer...
  • Using The E-Track Trailer Cargo Control # EM59150 On Trailer To Secure ATVs and Motorcycles
    Installing the E-Track Trailer Cargo Control, part # EM59150, would work well to strap down your ATVs and motorcycles on your V-nose trailer. You could mount the E-Track sideways or perpendicular to the trailer frame over the floor as you described. The E-Track can also be mounted on the wall of trailers, so perhaps you could mount the track for the ATVs on the floor towards the front of the trailer. Then you could mount track on the trailer walls for the motorcycles or on the floor as...
    view full answer...
  • Mounting E-Track for Hauling Motorcycle on 8 x 5 Trailer
    That's a great question. I believe your installation method for the Erickson Horizontal E-Track # EM59150 sounds like a great plan as long as you have the tracks facing the direction of travel. Basically the E-Track was designed around this and that is the most safe way to secure cargo. To secure your 900 lb bike you can either use the Erickson E-Track Tie-Off w/ D-Ring # E59143 with your current ratchet straps or you can update to the Erickson E-Track Strap with Ratchet # EM59136 which...
    view full answer...
    Image 1 for
  • What are Dimensions of Snap-Loc Single-Slot E-Track Bolt-On Tie-Down Anchor # SLSS
    The Snap-Loc Single-Slot E-Track Bolt-On Tie-Down Anchor # SLSS measures 5-3/4 x 1 x 1/2 inches. These single-slot E-Track Anchors are an ideal way to add additional single tie-down points to a trailer. The low-profile steel brackets can install on the ceiling, wall or floor of your trailer and can be inverted to provide a recessed tie-down point. They are rated for 3000-lbs each and are sold as single units. These are suitable for installation on any interior parts of your trailer...
    view full answer...
  • Can the Erikson E-Track System Be Used In An Aluminum Utility Trailer
    The Erickson E-Track system will work great in your aluminum utility trailer, but you will want to put a layer between the E-Track and the aluminum of your trailer. This layer will help prevent corrosion cause by contact of dissimilar metals. This layer can consist of almost any material, such as wood, rubber, or plastic. When installing the E-Track system in a trailer, one thing to keep in mind is to select locations that provide structural components, such as wall studs and floor supports....
    view full answer...
  • Can self-Tapping Screws Be Used To Install E-Track In Toy Hauler With No Under Bed Access
    If you are using self-tapping screws and attaching the part # E19148 5-foot rails to metal, you would be okay. If you are installing this into wood I would recommend making sure you have the right size fasteners for the 1/4 inch mounting holes, and that you have at least 3/4 inch depth for the screws to be fastened to. You should also use as many mounting holes as possible to attain the maximum strength needed. Wood screws will work better than self-tapping metal screws unless your decking...
    view full answer...
  • Will the Angle of Pull Affect The Weight Capacity of Erickson E-Track # E19148 or D-Ring # E59143
    The direction of pull doesn't necessarily affect the load capacity of either the e track or the D-Rings, however, when ratcheting down your load, the direction of pull should be parallel to the direction that the Erickson # E19148 e track is running. D-Rings, such as Erickson # E59143 are an excellent hook-up option for a couple of reasons: first, because if you happen to have different loads at different attachment points, these rings are easily movable and second because they have a 3,500lb...
    view full answer...
  • Recommended Attachment Method for E-Track in a Trailer with 1/8 inch Thick Steel Floor
    For installing the E-track like part # EM59150 that you referenced I would use self tapping screws in every other hole of the track. This is a 2 foot section of the E-track. If you needed a 5 foot section you would also want the part # E19148. For a D-ring that is designed to fit the E-track you would want the part # E59143.
    view full answer...
  • Optimal Direction of Pull When Using E Track
    In order to achieve the full capacity of the ratchet straps and the track, the direction of the pull should be parallel to the direction that the e track is running. How much the capacity would be diminished by pulling 90 degrees to the side will depend on the weight of the load. If the load is close to the capacity of the straps, pulling out 90 degrees could damage the clip that locks the strap into the track or possibly damage the track itself. You may also be interested in purchasing...
    view full answer...
  • Can I Use The Vertical E-Track E19146 In The Horizontal Position For My Covered Cargo Trailer
    My contact at Erickson confirmed that you are definitely able to use the Vertical E-Track # E19146 in the horizontal position. The advantage for you is that it will mount to the space you need it to fit. The only disadvantage of using the Vertical Track # E19146 is that there are less anchor points to hook into than the Horizontal E-Track, part # EM59150. To connect straps to the E-Track, you will need to use E-Track 2 Inch D-Ring, part # E59143. I have linked a video review of the D-ring...
    view full answer...
  • E-Track Recommendations For 7 By 14 Enclosed Trailer To Carry Classic Motorcycles
    With cargo like your two classic Harleys you will want to make sure they are really well secured to prevent any damage. I recommend securing the E-Tracks to something more stable than just wood. If you are attaching the tracks to the floor I recommend you make sure they are secured either to the metal structure of the trailer or use metal plates like the E-Track Backing Plate, part # e96RR, to make it as secure as possible. If the interior floor and walls are 7 ft long I recommend 5...
    view full answer...
    Image 1 for
  • Where to Install E-Tracks in Enclosed Trailer Carrying Polaris ATV and Motorcycles
    Since you will be using your E-Track system, part # E19148, for transporting more than one type of vehicle, you will want to try to find mounting locations that will work for all of them. The main consideration for deciding where to mount the E-Tracks is to select locations that provide access to structural components, such as wall studs and floor supports. These structural elements of your trailer will serve as the backbone of your E-Track system. It is important that the tracks mount...
    view full answer...
  • E-Track Setup to Secure Lamp Boxes in a Trailer
    For securing cardboard lamp boxes that are both 4 and 8 feet long with e-track like part # EM59150 your best option would be to go with e-track D-rings like the part # E59143 and then a tie-down set like the # 05605.
    view full answer...
  • What is the Working Load Limit for the E-Track System
    The working load limit for the E-Track system like the part # E19148 that you referenced is 2,000 lbs. There isn't a set method required for tightening a load to the E-Track. Basically you would want to use a properly rated strap for the weight of the item and use your discretion to secure it in whatever manner works best. For a way to secure a strap to the E-Track you would want the E-Track D-Ring part # E59143. Depending on how the E-Tracks were attached to the wall and the material...
    view full answer...
  • Best Versatile Tie-Down Options for a Cargo Trailer
    I am not sure how many of the Erickson E-Track systems you have seen but it really is your best bet when it comes to versatility and functionality. Not only do they have the Horizontal E-Track, like part # E19148, but they also have Vertical E-Track like part # E19146. You could install both types of track on your cargo trailer (if it is enclosed) and then move the attachment points around by either using the Erickson E-Track Strap # EM59136 or using the Tie-Off w/ D-Ring # E59143 along...
    view full answer...
    Image 1 for Image 2 for
  • Keeping Cargo from Moving and Shifting in Enclosed Trailer
    Adding trailer suspension enhancement such as # TTRA1702 can definitely help with ride quality but I think the best solution to keep loads on the pallet is some cargo control devices. You could start with a cargo net, I have included a link to the various sizes we carry. A cargo net is a simple solution to secure a large group of items with one device. You can also get some E-Track, # E19148, and attach them to the sides of the trailer. Then use some D-Ring tie downs, # E59143, and ratchet...
    view full answer...
  • E-Track Recommendation for Installing on the Inside of a Carson Fun Runner Toy Hauler
    Sounds like a good plan. For the 5 foot sections of the E-track you would want part # E19148. The # EM59150 that you referenced is sold in 2 foot sections. You might also be interested in the E-Track Tie-Off Ring # 59131, E-Track Wood Beam Socket # 59149, and E-Track 2" D-Ring part # E59143.
    view full answer...
  • Availability Of 20' Long Horizontal E-Track Rails
    I do have an option for you, but there is not an E-Track that is one piece and is 20' long. Instead I recommend using four of the 5' long etrailer Horizontal E-Track - Galvanized Steel - 2,000 lbs # e45VR. This will give you the 20' E-Track you are needing for your trailer. E-Tracks are compatible with quite a few accessories like a J-hook # EM59142, Tie-down # E59143, or tool holder # ETVH. I included videos of the products mentioned for you to take a look at.
    view full answer...
  • Anchor Recommendation for E-Track for Securing ATV
    For an anchor for an E-Track setup you would want the part # 59147 as it has a high capacity. Using a strap mounted setup like the part # E59143 is an additional option but they have lower capacities and since you want to pull at an angle the O anchor would be a better option.
    view full answer...
  • Recommended Erickson E-Track System for Transporting Motorcycle in Enclosed Trailer
    Installing the Erickson Horizontal E-Track # E19148 in your enclosed trailer is an excellent idea. Along with securing your motorcycle into place, the E-Tracks will provide great versatility to tie down various other cargo items in your trailer. For your motorcycle, I recommend installing the tracks on either side of the motorcycle to provide multiple tie-down points in order to keep it secure. Then you can use the Erickson E-Track Tie Down Rings # 59131 along with D-Ring Straps # E59143...
    view full answer...


< Previous
12



Do you have a question about this E Track?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Laura H
Updated by:
Laura H
Employee Jacob W
Updated by:
Jacob W
Employee Alex H
Updated by:
Alex H
Employee Carrie H
Updated by:
Carrie H
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924