bing tracking image
  1. E-Track
  2. Erickson
  3. E-Track Straps
  4. 12 Feet Long
  5. 1000 lbs
  6. 2 Inch Wide
Erickson E-Track Strap with Ratchet - 2" Wide x 12' Long - 1,165 lbs

Erickson E-Track Strap with Ratchet - 2" Wide x 12' Long - 1,165 lbs

Item # EM59136
Retail:$32.19
Our Price: $18.37
You Save: 43%
E-Track
Shipping Weight: 1.95 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
The ends of this blue logistical strap from Erickson are designed to fit into the vertical or horizontal E-track on your trailer. Ratcheting buckle tightens and locks strap in place to secure whatever you are carrying. 3,500 lbs Max load. 1-800-940-8924 to order Erickson e-track part number EM59136 or order online at etrailer.com. Free expert support on all Erickson products. Great prices and Fastest Shipping for Erickson E-Track Strap with Ratchet - 2" Wide x 12' Long - 1,165 lbs. E-Track reviews from real customers.
  • All Info
  • Reviews (387)
  • Q & A (0)
  • Photos

Erickson E-Track - EM59136

  • E-Track Straps
  • 12 Feet Long
  • 1000 lbs
  • Erickson
  • 2 Inch Wide

The ends of this blue logistical strap from Erickson are designed to fit into the vertical or horizontal E-track on your trailer. Ratcheting buckle tightens and locks strap in place to secure whatever you are carrying. 3,500 lbs Max load.


Features:

  • Blue polyester strap comes with E-track ends
    • E-track (sold separately) mounts in trailer along walls or floor to provide secure, adjustable tie-down points
    • Ratchet strap attaches to E-track to secure loads
  • Ratchet tightens tie-down strap to secure your cargo in place


Specs:

  • Strap dimensions: 12' long x 2" wide
  • Maximum load (break strength): 3,500 lbs
  • Safe working load limit (WLL): 1,165 lbs
  • 90-Day limited warranty


Note: Tie-down straps must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the straps being used. For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.



59136 Erickson Logistic Ratcheting eTrack Strap - 12' Long x 2" Wide - 3,500 lbs (1,165-lb WLL)





Customer Satisfaction Score:


Customer Reviews

Erickson E-Track Strap with Ratchet - 2" Wide x 12' Long - 1,165 lbs - EM59136

Average Customer Rating:  4.9 out of 5 stars   (387 Customer Reviews)

The ends of this blue logistical strap from Erickson are designed to fit into the vertical or horizontal E-track on your trailer. Ratcheting buckle tightens and locks strap in place to secure whatever you are carrying. 3,500 lbs Max load.

by:

eTrailer is my go to place for all my trailer needs. Their products are top notch, customer service is spectacular and shipping is very fast. George and his eTrailer family are all great to deal with and highly informative as to their product line. If eTrailer doesn’t have you probably don’t need it !!!



by:

Great straps combined with e track and removable chocks. Highly recommended.



by:

Nice, strong construction of the chocks, but the paint doesn't seem durable. Rachets and track appear to be good quality



by:

Love the way these strap work. First time using them over conventional hook straps. We is them in our quad/snowmobiling/work trailer to fasten down gas can, chair and removable Gladiator work cabinet. The fact you can lock them in, loosen them and leave hanging in the case of the chair and cabinet makes it easy to refasten and go back in the same location



by:

Excellent, when tighten down over the center of the tires and placed in the track as close as possible to the tires they do not loosen or allow the Polaris Ranger 900 Crew to shift or move at all.
Great for short day trips and long several day trips.



by:

I haul live bait on a galvanized trailer. The e-track system is ideal for my application. The salt water doesn't affect anything and works great. I also use it to secure UTVS. I couldn't be more happy with the products and the service.



by:

Makes proper tie down simple and logical



by:

Excellent product. We will be ordering from etrailer in the future!



by:

Excellent products. Ordered on a Tuesday and in less than 24 hrs it was on my doorstep 2 states away with standard shipping!!



by:

They work very well along with two wheel chokes.



by:

These will do the job splendidly!



by:

These work great to secure items to the sides of my trailer.



by:

This tie down system is the greatest. I have used similar systems in the military to secure cargo on aircraft. No ropes to tie, no stretch web straps and ratchet winches that are easy to use are great reasons to utilize this product. This product is one of the best for making sure your cargo stays in place.

Don

8/23/2019

This product has continued to be everything I originally stated and everyone that has seen my application agrees that this works great!



by:

This was a repeat order. The ratchet straps perform as expected and the short 'dead end' length is just what I need sometimes.



by:

This is just what I need. It was hard to find e-track straps with short attached ends. Also, I was using cam-lock straps and I much prefer the ratchet straps. I am using these straps to secure PA equipment in my box trailer.

James R.

3/25/2015

Still a perfect fit for me!



by:

Straps do great, they lock in the E-Track and are secure.
I run them across the top of the tires and they do not move or release any of the tension. They stay put.



by:

Holds down securely and easily

Steve

8/27/2022

works great I now have two sets



by:

Works very well. Have used on at least 30 trips. It would be nice if there was a little more contrast on the center stitch, but that would not stop me from buying them again.



by:

We repair furniture, at times we have to go out and bring it back to the shop. On our truck we have the erickson E track Strap and other brands of straps. While transporting a china and hutch we went over a set of R R tracks and we herd a loud noise. We pulled to the side of the road and looked in the back. We had two straps on the china one off brand and one erickson . The off brand had completely bent and pulled wright out the the E track. The erickson held. Great product. Thanks.



by:

I have etrack mounted on the floor of my enclosed trailer, I used it to strap down my SXS. It onlt take 5 minuutes, and I'm ready to go. In the year I've used this system It's been fantastic. Before etrack I was using store bought straps, attached to the frame or suspension, they were always coming lose. Fantastic product.



by:

After being back ordered for several weeks the e-track and other items arrived. I was kept informed of the process during this period and all was excellent. Can’t say enough about the customer service provided.
Just installing the track now and the tie downs look to be just as I expected. Will use soon.



by:

I have an F-150 with the Box link system in the bed from Ford. This gives you 4 E Track locations in the bed. This Erickson ratcheting straps are perfect for my needs they fit great in my OEM Ford location. They are well made the straps held up good going over rail road tracks and in a light rain storm. If you own a Ford and are looking for straps that work with the box link look no further!



by:

my first time to install and use E-track and accessories and am very happy with the quality of the product. our cargo trailer is used for hauling mostly antiques and furniture we intend to use this tie off ring to connect our existing straps which do not have the required end track fittings.
the picture shows using new straps also purchased.



by:

These work excellent for tying down racecars in the trailer. We love them because the car rides on its own suspension and we don't have to worry about bending chassis parts since this goes around the tire.

Be sure to strap them down TIGHT!!! with these so they don't slip off... you can't hurt the tire.



by:

This E-Track (and E-Track straps) was installed on the wall of my box trailer to secure a rolling took chest. It has performed flawlessly. Thanks again etrailer, for a great product.


25
381
Show More Reviews

See what our Experts say about this Erickson E-Track

  • Ratchet Strap Length of Erickson E-Track Strap and Ratchet
    The strap length on the ratchet side of the Erickson E-Track Strap with Ratchet part # EM59136 is 5-1/4 inches.
    view full answer...
  • Recommended Tie Down Straps for BoxLink System on 2015 Ford F-150
    With the BoxLink system on your 2015 Ford F-150, you have multiple options when it comes to tie down straps. You can attach directly to the BoxLink cleats or hook directly to the interface plate with a bungee cord, S-hook, or E-track fitting. I have attached a link to multiple options for tie downs. A couple popular options are the Erickson E-Track Strap with Ratchet, # EM59136, and Erickson Re-Tractable Ratchet Straps, # EM34415.
    view full answer...
  • Can I Use the Erickson E-Track Wheel Chock with 180mm Wheels
    When you convert the width of your 180mm tire into inches, it's going to be 7.08", and the E-Track Wheel Chock # 3481731 is designed to handle a maximum of 7" tires and you're going to be right at the cusp. Since we're dealing with 1/100ths of an inch in this case, I do believe that you'll be able to make it work, but it's going to be a snug fit. I do recommend also using the Erickson E-Track Straps # EM59136 to further secure your bike in this setup, as well.
    view full answer...
    Image 1 for
  • Using Erickson Roller Idler Along with E-Track Tie Down Ring
    The Erickson E-Track Tie Down Ring # 59147 that you mentioned will work very nicely along with the Erickson Roller Idler # EM09144. This tie down ring has a Safe Working Load Limit of 2,000 pounds and a 6,000 pound capacity. As you referenced in your question, when using this with the Roller Idler that will act as an anchor point, the strap will then be fed through the ratchet and run more parallel to the E-track. This will not affect the weight capacity of the Tie Down Ring. I confirmed...
    view full answer...
  • Can the Ratchet Straps Which Come With the Erickson ATV E-Track Tie-Down Kit Be Ordered Separate
    If you are looking for just the e-track mount ratchet straps which comes with the Erickson ATV E-Track Tie-Down Kit part # EM09160 the closest thing we have is the Erickson E-Track Strap with Ratchet part # EM59136 which is just a slightly longer version.
    view full answer...
  • Mounting E-Tracks in Enclosed Trailer
    There needs to be some type of strong structural component on your trailer where you want to mount the Erickson Horizontal E-Track # EM59150. There is nothing that I can recommend which will ensure they will be strong enough unless your trailer has the proper place to mount the tracks. You may want to consider putting the E-track on the floor and then using Erickson E-Chock Wheel Chock for E-Track # EM09162 and ratcheting straps such as # EM59136.
    view full answer...
  • Which Way Should E-Tracks be Mounted to Secure Dirt Bikes in a 5' x 10' Trailer?
    The Erickson Horizontal E-Track # E19148 can actually be mounted either way. For your setup, however, I suggest going widthwise. This way you can mount the dirt bikes side by side while strapping all the fronts along the same track as well as all the rears along another track. This will be the most stabile way to load all the bikes. If you do not already have some tie down straps, the Erickson E-Track Strap with Ratchet # EM59136 will secure everything very nicely. These are 12 feet long...
    view full answer...
  • Enclosed Trailer Wall Reinforcement for Installing Erickson E-Track
    To install an 8-foot length of Erickson E-Track # E19135 inside your enclosed trailer I do recommend first mounting some plywood to your interior wall studs. A piece of plywood that is larger than the E-Track's 5-1/8-inch width will spread the load across more of the trailer structure. For instance if you first installed a 1 x 8-foot piece of plywood across the studs that would allow more fasteners to be used than with the E-Track rail alone. Then you could mount the E-Track to the plywood...
    view full answer...
  • Pack Em or Erickson Wheel Strap Recommendation for Securing 2014 Honda Pioneer 700
    Actually both the Pack'em Wheel Ratchet Strap Kit part # PK-WTD and the Erickson Ratchet Strap kit part # EM09160 both use ratchet straps to secure the wheel. Since the Pack'em set is rated higher at 2,000 lbs that would be what I would recommend for you. For just the strap # EM59136 is for the Erickson setup.
    view full answer...
  • Does the Erickson ATV E-Track Tie-Down Kit # EM09160 Have to be In-Line with Direction of Travel
    You can use the Erickson ATV E-Track Tie-Down Kit # EM09160 to help secure your ATV but you really need something securing your ATV in the direction of travel. You could put some Horizontal E-Track like part # E19148 in-line with the direction of travel and do a kind of criss-cross pattern over your ATV with straps like part # EM59136 to help secure it, but Erickson does not recommend securing the load only using a straps that are not with the direction of travel. As long as your trailer...
    view full answer...
  • Chock and Strap Trailer Tie Down System For A 2016 Polaris RZR With 32" Wheels
    To secure an ATV with 32" tires to a trailer a few components are needed for worry-free transport. The Erickson Horizontal E-Track part # EM59150 is a great system for securing a variety of items, not just your RZR. For your specific need, a set of wheel chocks and tie downs like the Erickson E-Chock Wheel Chocks for E-Track part # EM09162-2 and the Erickson E-Track Strap with Ratchet # EM59136 are needed. In total you need 4 tracks, 2 wheel chock sets, and 4 tie down straps to secure...
    view full answer...
  • Can the Strap from the Erickson ATV E-Track Tie-Down Kit Be Purchased Separate
    Yes, we do offer the straps from the Erickson ATV E-Track Tie-Down Kit separately. I have listed these for you below, they vary by length. 12' - part # EM59136 16' - part # EM59139 20' - part # EM59140
    view full answer...
  • Availability of Blue Ratchet Strap to Fit E-Tracks
    We have a similar blue E-track ratchet to the part # SLLS28RER but it's instead 12 feet long. For that you'd want the part # EM59136.
    view full answer...
  • E-Track Recommendation for Securing ATV to Utility Trailer
    E-track can easily attach to the wood floor you have in your open utility trailer. This is a very common style of trailer that is used with the E-tracks. I attached a couple review videos that show etracks installed in a similar trailer as yours and what they use to secure the cargo. The etrack sections like the part # E19148 would be more than adequate to secure your ATV. The # 59131 is a great anchor to use, or if you want a strap that attaches directly to the etrack we have the # EM59136...
    view full answer...
    Image 1 for
  • Option to Carry Kayaks with E-Tracks Inside Cargo Trailer
    I am not aware of an e or x-track accessory that is designed specifically for carrying kayaks but we do have options for this assuming the tracks are on the walls. I recommend using a few CargoSmart Large Rotating Flat Hooks part # 3481701 to suspend the kayaks and then a few Erickson E-Track Straps with Ratchet part # EM59136 to hold them in place. The Erickson E-Track Tie Down Ring part # 59131 along with some standard ratchet straps can be used as well.
    view full answer...
  • Using The E-Track Trailer Cargo Control # EM59150 On Trailer To Secure ATVs and Motorcycles
    Installing the E-Track Trailer Cargo Control, part # EM59150, would work well to strap down your ATVs and motorcycles on your V-nose trailer. You could mount the E-Track sideways or perpendicular to the trailer frame over the floor as you described. The E-Track can also be mounted on the wall of trailers, so perhaps you could mount the track for the ATVs on the floor towards the front of the trailer. Then you could mount track on the trailer walls for the motorcycles or on the floor as...
    view full answer...
  • What Does Working Load Limit Mean for E-Track
    Good question and the 2,000 lb working load limit (WLL) of the Erickson Horizontal E-Track such as the 5 foot # E19148 is the safe limit for the weight of the cargo the track is helping secure. To simplify, it is the cargo capacity that the track can safely handle so you do not want to exceed it. However, the 2,000 lb limit is per track, so that means if you put down two tracks horizontally, your WLL would go up to 4,000 lbs. This track cannot actually be welded on, it needs to be secured...
    view full answer...
    Image 1 for
  • Can the Erickson ATV E-Track Tie-Down Kit EM09160 Wheel Chocks Be Split Across Axles
    Instead of splitting the wheel chocks and straps of one Erickson ATV E-Track Tie-Down Kit # EM09160 across the ATV's two axles I suggest using two kits. The modest price of this Erickson tie-down kit means using two will not cost too much, but doing so will not only provide a much bigger safety margin relative to the weight of your ATV, but also allow that at other times when you're using the trailer for standard cargo items you will have multiple attachment points you can use along with...
    view full answer...
  • Mounting E-Track for Hauling Motorcycle on 8 x 5 Trailer
    That's a great question. I believe your installation method for the Erickson Horizontal E-Track # EM59150 sounds like a great plan as long as you have the tracks facing the direction of travel. Basically the E-Track was designed around this and that is the most safe way to secure cargo. To secure your 900 lb bike you can either use the Erickson E-Track Tie-Off w/ D-Ring # E59143 with your current ratchet straps or you can update to the Erickson E-Track Strap with Ratchet # EM59136 which...
    view full answer...
    Image 1 for
  • Is Erickson E-Track Trailer Cargo Control Available With Galvanized Mounting Base
    It is possible that the galvanized plate is a custom job, it could be part of the cargo truck, or the track was already installed in the truck from the manufacturer. The item you selected, Erickson E-Track Trailer Cargo Control, part # EM59150 is zinc plated. The E-Track can be mounted using screws, or rivets. If using screws, I would use a stronger grade screw like sheet metal screws. For tie downs and straps I would recommend either the E-Track Tie-Off Ring # 59131, or E-Track 2 inch...
    view full answer...
  • Will the etrailer Horizontal E-Tracks Work for Securing a Vehicle and Does Every Hole Need Be Used
    The etrailer Horizontal E-Tracks like part # e42VR are a great option for securing vehicles especially when combined with the Erickson E-Chock Wheel Chocks part # EM09162-2 and Erickson E-Track Strap with Ratchet part # EM59136. I don't really have an exact answer for you in regards to the number of screws needed as this has been difficult information to get from the manufacturer sicne there are soo many variables but the closer you are to the weight capacity of the track, the closer you...
    view full answer...
  • Availability of E-Chock Wheel Chocks and E-Track Strap for Honda SXS With 32 Inch Tires
    While we do have separate E-Chocks available like the # EM09162, they require E-Track rails like the # e65VR. Unfortunately, the E-chocks with the E-track slots are only available with the # EM98CV tie-down kit. There is also no way to substitute the straps in the kit. We do have longer straps available like the Erickson E-Track Strap with Ratchet # EM59136. This strap is 12' long x 2" wide and has a safe working load limit of 1,165 lbs.
    view full answer...
  • Availability of 2-Slot E Track Horizontal Track with Black Powder Coat Finish
    I have a few of options for you, but this exact Erickson 2-Slot Horizontal E-Track # EM19145 isn't offered with a black powder coat finish. The Erickson Mini E-Track Plate # EM09134 is the closest option I have. It also has 2 horizontal slots and a nice matte black powder coat finish for superior corrosion resistance and adds a nice rugged look to it as well. This plate has a safe working load limit (WLL) of 800 lbs and a maximum load (break strength) of 2,400 lbs, which is much lower...
    view full answer...
  • Hardware Recommendation for Securing E Tracks to Plywood Trailer Floor
    Securing the Erickson E-Track # E19148 to 3/4 inch plywood should be sufficient. To secure the track to the plywood, you can use screws, or rivets. Using 1/2 inch screws would be a good length with 3/4 inch plywood. You will want to attach screws at least every other mounting hole. For tie downs and straps I would recommend either the E-Track Tie-Off Ring # 59131, or E-Track 2 inch D-Ring, part # E59143. Also available is the Erickson E-Track Strap with Ratchet, part # EM59136.
    view full answer...


< Previous
12



Do you have a question about this E-Track?


Info for this part was:

Employee Leah B
Updated by:
Leah B
Employee Wilson B
Updated by:
Wilson B
Employee Jameson C
Expert Research:
Jameson C
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.