bing tracking image
  1. E-Track
  2. Erickson
  3. E-Track Rails
  4. Horizontal
  5. 2 Feet Long
  6. 2000 lbs
Erickson Horizontal E-Track - Zinc Plated Steel - 2,000 lbs - 2' Long - Qty 1

Erickson Horizontal E-Track - Zinc Plated Steel - 2,000 lbs - 2' Long - Qty 1

Item # EM59150
lowest price pledge
Retail:$29.22
Our Price: $21.55
You Save: 26%
E-Track
Orders above $99 qualify for Free Shipping
Shipping Weight: 3 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
2' E-track with horizontal slots is perfect for installation in truck or trailer beds or on enclosed trailer walls. Multiple slots for securing E-track straps and tie-down anchors. Bolt-on installation (hardware not included). 6,000 lbs Max load. 1-833-496-1390 to order Erickson e-track part number EM59150 or order online at etrailer.com. Free expert support on all Erickson products. Guaranteed Lowest Price and Fastest Shipping for Erickson Horizontal E-Track - Zinc Plated Steel - 2,000 lbs - 2' Long - Qty 1. E-Track reviews from real customers.
  • All Info
  • Reviews (1090)
  • Q & A (0)
  • Photos
  • Why etrailer?

Erickson E-Track - EM59150

  • E-Track Rails
  • Horizontal
  • 2 Feet Long
  • 2000 lbs
  • Erickson
  • 5 Inch Wide

2' E-track with horizontal slots is perfect for installation in truck or trailer beds or on enclosed trailer walls. Multiple slots for securing E-track straps and tie-down anchors. Bolt-on installation (hardware not included). 6,000 lbs Max load.


Features:

  • E-track provides tie-down points for securing cargo in your trailer, truck, or van
    • For use with E-track straps and anchors (sold separately)
  • 2' section with multiple anchor slots is ideal for truck or trailer beds and enclosed trailer walls
  • Horizontal slots are designed for wall or floor mounting
  • 12-Gauge steel construction is zinc plated for corrosion resistance
  • Requires screws or rivets (not included) for bolt-on installation


Specs:

  • Dimensions: 2' long x 5" wide x 7/16" tall
  • Safe working load limit (WLL): 2,000 lbs
  • Maximum load (break strength): 6,000 lbs
  • Diameter of mounting holes: 1/4"
  • Mounting hole spacing: 2"
  • 90-Day limited warranty


Dimensions of E-track slots and from mounting hole to mounting hole and top to bottom

Notes:

  • It is recommended that you use a backing plate (sold separately) every 12" for best results.
  • Use all mounting holes on this E-track for optimal installation.


59150 Erickson Manufacturing Horizontal Etrack Trailer Cargo Control - 2-Foot Piece






Customer Reviews

Erickson Horizontal E-Track - Zinc Plated Steel - 2,000 lbs - 2' Long - Qty 1 - EM59150

Average Customer Rating:  4.9 out of 5 stars   (1090 Customer Reviews)

2' E-track with horizontal slots is perfect for installation in truck or trailer beds or on enclosed trailer walls. Multiple slots for securing E-track straps and tie-down anchors. Bolt-on installation (hardware not included). 6,000 lbs Max load.

- EM59150
by:

I have owned them for a year now and use it in my 6 x 12 Aluminum trailer to transport my 2015 Ducati 899. They have been nothing but reliable and I have had zero issues with them. As a matter of fact I am purchasing a second bike and will be buying more of these to put on the side walls of the trailer. I highly recommend them to everyone.


Comments
I have had ZERO issues with these e-tracks! I have been to many places with my 899 and the tracks with my straps have held up just fine! Highly recommended! :-
Jeff G - 08/25/2017



- EM59150
by:

E-Track is the only way to go for me! I had a 6x12 enclosed trailer with 4 sections of 8' E-Track and when I sold that trailer to get a 7x16, I needed to get 6 more 2' sections. I have had both tie down anchor points and E-Track and E-Track is the only way to go for me now!


Comments
Thank you Patrick, these products are still working great!
Cole P - 12/12/2014


- EM59150
by:

These things are very handy! Think through what you're going to carry and how you need to secure it. E-Track is very versitile with many different options for controlling your cargo. etrailer has great prices and extra superfast (tm) shipping too.


Comments
Still perfect...not s better solution.
Trailering D - 09/10/2015



- EM59150
by:

Only 4 star since it's -14 this morning and I've not gotten the E-track installed. I've done it before and expect it should go smoothly and give my cargo trailer the versatility for hauling stuff that I need. E-Trailer is always great to order from ... good prices, free ship, no tax! [Other site] pricing was all over the place on this, and it was much easier going through E-Trailer.


Comments
Got my cargo trailer outfitted for our move, which I did back and forth over 3 trips across 3 States. E-Track is THE ticket for versatility in being able to safely
Mike - 01/06/2018



- EM59150
by:

Not designed for securing tie downs at an angle. Tried to use for securing my car to the trailer floor. The rings ripped through the E-Track plate. The load was well under the rating of the E-Track and rings. While the reps at etrailer were responsive to my issue (Erickson reps were not), the product was not covered under warranty. I was told that the tie downs must extend vertically upwards from the E-Track. Lessoned learned and I ended up using the recessed D rings instead.



- EM59150
by:

E-Track is very well built and makes securing cargo in my trailer easy and convenient. Installation was a snap with an extra helping hand. Highly recommend upgrading walls in an enclosed trailer to a quality plywood .46 inches or thicker, to be able to utilize the track to its full potential. The only drawback I had with the track is that the holes are not drilled out to 5/16th's like the backing plates. I had to drill out the holes I used with my step drill bit to ensure my 5/16th's hardware worked. Highly recommend utilizing grade 5 or higher nuts and bolts for a secure, reliable installation.



- EM59150
by:

Very nice. Long enough for both sides to be bolted to the metal plates underneath my Carson toy hauler in the back. I had to use single hooks in the front to avoid drilling through the water tanks. I drilled on the side of and in between tanks instead.


Comments
Very nice
pete - 03/25/2015



- EM59150
by:

Decked out my new cargo trailer with this e-track. Looks sweet! Heavy gauge construction. Easy installation. Along with the Erickson E-Track straps now I'm ready to haul just about anything safely and securely. Thanks etrailer!



- EM59150
by:

Etrailer supplied the equipment I needed at a great price and shipped the the northwest coast with on days from when I placed the order. All the e-track hardware and equipment was in stock and arrived packaged very well with no shipping damage. The e-track is heavy duty, much more than I had expected and it was easy to install. Looking forward to upgrading my trailer even more from etrailer. Thanks again!



- EM59150
by:

I ordered a variety of e-track components from etrailer to install in my 20ft enclosed Haulmark trailer. With only four factory installed recessed D-rings the trailer offered very few tie down options. Etrailer extensive product catalog provided one-stop shopping and their videos were very helpful when researching configuration and installation options. All products arrived on schedule and I am very impressed with the quality.



- EM59150
by:

E-Track System is an Awesome product! All of the items that I ordered were shipped next day and arrived three days later. When my order arrived I noticed that I had some pieces of vertical track instead of horizontal like the rest. So, I reviewed the invoice and I had in fact ordered the vertical tracks. (My fault for not paying attention). I call e-trailer that day and the rep. corrected my order and arranged the return of the vertical tracks within minutes. Yes, I had to pay for the return because it was my mistake! Any future parts I need for my trailer will be purchased from etrailer.com.



- EM59150
by:

Used this little section of E-track to hang my spare tire carrier on in my motorcycle trailer - Love the E-track and its components!



- EM59150
by:

E-Track is a great way to add tie down points to a cargo trailer. I've installed E-Track on the floor and walls. Installation is a very easy one person project. Hint... When installing E-Track on the walls, use a "stud finder" and "drill bit stop" to avoid punching a hole through the outer skin of your trailer.



- EM59150
by:

Perfect for filling in a shorter area where you need a fastening point. Nice heavy gauge steel too!



- EM59150
by:

Talk about making work quick and easy... These tracks along with any style of strap you need makes any tie down job simple and versatile. Nothing comes lose and everything stays right where you want it.



- EM59150
by:

After one year, these have proven to be the most useful modification I have made to my trailer. They offer a functionality that I never expected. I was looking for adjustable tie down points but the other accessories available are almost infinite. They look as good today as they did the day I installed them.



- EM59150
by:

This e-track is made of quality material and is easy to install. The track works perfect with the attachments i purchased. I had to drill some new holes as my trailer studs were not compatible for some of the pre-drilled holes.



- EM59150
by:

If you are wanting to design a very personalized trailer, then I highly recommend you order your own e-tracks and put them where you want them! These are great products, shipping was very fast and even though the box arrived damaged, everything inside was just fine! I will order again from etrailer.com.



- EM59150
by:

Very pleased with your service! I placed my order at about Noon and that very same day I received a e-mail that my order was shipped with in 3 hours after I placed it. The E track & tie down rings I ordered fits exactly what I was hoping it would do. I am using it in my horse trailer too secure my UTV.



- EM59150
by:

The website and service are second to none. I had a question about which product to use and within a couple of hours etrailer had an expert reply, creating a web page with detailed information and links to suggested solutions. Also a photo of the guy who wrote it and his name and email address in case I needed more help. I went ahead and ordered and well within the promised time the box arrived. To me this is the standard by which all other online retailers should be compared. Whenever I need anything they sell, etrailer is the place I will return for more purchases. I couldn't be happier with the company.



- EM59150
by:

I have not installed the E-track as yet but there will be no issues as I can see it is well produced and substantial. What I can comment on is etrailer's website and service. There is no doubt this company has one of the best websites for an on line marketer. Every product offered is covered in detail with spec listing, customer photographs, company photographs and best of all a video describing in exact detail the product, application and in many cases installation. Once you decide to purchase the process is so intuitive and follows so well it is a pleasure to complete the order. Delivery is always within a couple of days. Great Company.



- EM59150
by:

Exact fit replacement which was easy to install. The detailed measurements provided on the etrailer web page made me confident that this would work without any modifications. Etrailer communicated shipping status which made the whole buying process seamless.



- EM59150
by:

Heavy duty which is exactly what I want ed...



- EM59150
by:

Perfect product to add utility inside of my car hauler/utility trailer.


Comments
All great and very useful.
John - 03/08/2019



- EM59150
by:

These are very well made and just what I was looking for. They will be used in my enclosed trailer to tie down my wife's new ELF (3 wheel electric bicycle). The product was shipped quickly and arrived well packaged. I will be returning to etrailer.com for all my trailer needs.


25
1136
Show More Reviews

Ask the Experts about this Erickson E-Track



  • Can Self-Tapping Screws be Used to Secure E-Track on a Trailer with an Aluminum Frame
    Self-tapping screws should not pull out of an aluminum frame unless you go beyond the capacity of the screw or what the aluminum is capable of. The aluminum capacity can be difficult to determine so the best thing to do to ensure that does not happen is to use fasteners that require nuts to secure them. You have to be careful using nuts and bolts though because you can end up deforming the aluminum frame if you torque the nuts down too hard.
    view full answer...
  • How Should I Mount My E-Track Trailer Cargo Control for Securing Generators and Air Compressors
    You can mount the E-Track Trailer Cargo Control, # EM59150, using either wood screws or by using bolts with washers and nuts if you like. There is no recommended way to mount the E-Track, installation can be done a variety of ways and is at the discretion of the installer. I personally would use nuts and bolts with washers, as long as getting to the back of the plywood would be possible. If it would be too much of a chore to use nuts, bolts, and washers I think that if you put a wood screw...
    view full answer...
  • Attaching Galvanized E Track to Flooring In Trailer
    I would recommend using the galvanized lag bolts you refer to. Due to the thickness of the floor, I do not think it would be necessary for all the lag bolts to go through the flooring and bolt to the frame, but having the 4 at each end and two in the center would be a good idea. The remaining bolts, spaced an one foot intervals could be driven into the 2x8 planks. The galvanized e track would hold up well to the weather.
    view full answer...
  • Recommendations for Anchoring E-Track to a Ply-Wood Trailer Floor
    It depends on how much load you will be applying to the track, what you are holding with it, and how the trailer frame is made. If you can get to the trailer frame, use nuts and bolts to attach through the floor and the metal trailer frame. If you are using it to secure an ATV or 4-wheeler, mount the track where the ATV tires will rest on it and the weight of the ATV will hold the track down. This way you would only need a handful of attachment points just to keep the track from sliding. If...
    view full answer...
  • Anchoring E-Track to 3/8 Inch Plywood Side Walls of an Enclosed Cargo Trailer
    Anchoring the E-Track Trailer Cargo Control, item # EM59150, is situational so there are no manufacturer recommendations. For your situation I would recommend securing the plywood to the trailer frame in as many points as possible. Before adding extra fasteners to secure the plywood I would remove the plywood from the areas that I plan on installing the E-Track and reinforce the back of the plywood with a mounting plate designed to work with the E-Track. If you take the time to make reinforcement...
    view full answer...
  • How Much Does the Erickson Horizontal E-Track # EM59150 Weigh
    The 2 foot section of Erickson Horizontal E-Track # EM59150 that you referenced only weighs about 1 lb.
    view full answer...
    Image 1 for
  • Can E-Track Attach to Diamond Plate
    As long as you securely attach hardware on the back side of the diamond plate e-track like # EM59150 will attach just fine to it.
    view full answer...
  • Can an E-Track like EM59150 Install Across More than One Board
    Yes you could install an e-track like the part # EM59150 between two boards. There's no requirement that an e-track has to install only on a single board. Having them across more than one board would probably spread the weight out better anyway.
    view full answer...
  • Attaching E-Tracks to Interior Van Walls
    The method you'd use attaching the E-Track like # EM59150 to a vehicle will would depend on the structure of the vehicle wall and what exactly it's constructed of. We don't have any kits that were designed specifically for vehicle use like for your Transit. If the interior walls of your trailer have uprights of sufficient thickness to handle the length of self tapping screws this would be the best and easiest solution.
    view full answer...
  • Length Between Furthest Bolt Holes on Erickson Horizontal E-Track # EM59150
    I went out to our warehouse and measured a length of right at 22 inches between the two furthermost bolt holes (on center) on the Erickson Horizontal E-Track # EM59150. I have attached a diagram to assist.
    view full answer...
    Image 1 for
  • Can E-Track Attach Directly to Wood Floor with Wood Screws
    If you wanted to install E-track like the # EM59150 directly to a wood floor using wood screws you could but you'd want to put a screw in each mounting hole like you mentioned. This attachment method would easily allow the track to have it's full capacity of 2,000 lbs.
    view full answer...
  • Would Wood Screws in Every Hole of E-Track # EM59150 Be Adequate for Securing Motorcycle
    If you used wood screws in every hole of the E-track part # EM59150 that you referenced you'd have enough capacity to secure your 900 lb motorcycle. There isn't a one-size-fits-all method for installing the E-tracks but for your situation and what you are wanting to do using every screw hole with wood screws would be adequate.
    view full answer...
  • Can Self Tapping Screws Be Used for the Erickson Horizontal E-Track
    The Erickson Horizontal E-Track part # EM59150 can indeed be installed with self tapping screws. In regards to the number, most don't do every hole but there isn't really a required number either. It just comes down to the installer and application. I think every other hole would be just fine.
    view full answer...
  • Installing Erickson E-Tracks for Use on Car Hauler Trailer
    If you are looking to use Erickson E-Track on a car hauler trailer you do not have to flush-mount the tracks. They can be secured to the trailer's decking with fasteners appropriate for the decking material (a minimum of 2 fasteners per linear foot on each side of the E-Track). It is perfectly okay to have the tires rest on the tracks since they are each rated for 6000-lbs. We offer the Erickson E-Track Wheel Tie-Down Strap # EM58523 that you can use with the tracks.
    view full answer...
  • Determining Spacing of E-Tracks for Vehicle Transport
    I really wish there was an easy answer as to a safe track spacing with the Erickson E-Tracks # EM59150 to accommodate most vehicles, but the truth is that there are just too many possible widths to comfortably answer this without actually figuring out the tire widths on the particular vehicle you plan on hauling. Your best option is really to figure out the tire width on your vehicle and install the tracks accordingly on the trailer. The Erickson Wheel- Tie-Down Strap # EM58523 that you...
    view full answer...
    Image 1 for
  • Can Horizontal E-Tracks be Used with Erickson Wood Beam Sockets # 59149
    You can absolutely use the Horizontal E-Tracks # EM59150 that you referenced in your enclosed trailer with 4 of the Wood Beam Sockets # 59149 to create a shelf. There isn't any structural benefit to using vertical E-tracks for this application over the horizontal tracks you are wanting to use. Vertical mount tracks would just allow for a bit more versatility as you could lower or raise the shelf if desired (but in your setup you could move it forward or back). The holes on the brackets...
    view full answer...
  • Can E-Tracks Be Used to Secure Vehicles in Car Hauler
    Yes, E-tracks are used quite a bit for car hauler applications like what you have so as long as you secure them well like the Erickson E-Track part # EM59150 you'd be fine. We have wheel straps too for E-Track like the part # 77314 which would work well. Each of these has a 1,166 lb capacity.
    view full answer...
  • Mounting E-Tracks in Enclosed Trailer
    There needs to be some type of strong structural component on your trailer where you want to mount the Erickson Horizontal E-Track # EM59150. There is nothing that I can recommend which will ensure they will be strong enough unless your trailer has the proper place to mount the tracks. You may want to consider putting the E-track on the floor and then using Erickson E-Chock Wheel Chock for E-Track # EM09162 and ratcheting straps such as # EM59136.
    view full answer...
  • Length Availability of the Erickson E-Track Rails
    The horizontal E-Track rails come in 2ft and 5ft sections. You could purchase a couple 5ft section, # E19148 and cut them down to the size you need.
    view full answer...
  • E-Track For a Small Mounting Area on a Tow Dolly
    There is actually a single E-Track anchor, # SLSB. Once installed you can then use tie-down # SLARI. Or you can use other E-Track accessories. You can cut down a regular piece of E-Track but it is an extra expense and work that isn't necessary since the single E-Track is available.
    view full answer...
  • Using Erickson E-Track on Floor of Snowmobile Trailer
    The Erickson E-Track is pretty rugged stuff, I doubt that the snowmobile track would crush it. Because of the studs, you might consider installing the etrack so that its let into the floor so that the face is flush with or slightly recessed from the floor. We do not offer the etrack in different colors, its available in raw steel like the # EM59150 or in zinc plated as part # E19148.
    view full answer...
  • Using E Track and Wheel Nets to Secure Vehicles During Transport
    I would recommend installing the 5 foot sections of E Track, part # E19148 directly to the cargo floor of the truck. You could then use a series of Wheel Nets, part # EM58523 to secure the vehicle wheels to the E Track (4 per vehicle, 4400 lb capacity per 4.) The method of securing the E Track to the truck floor will depend on the construction of the floor itself. The more fasteners used, the stronger the installation. You'll want to make sure some of the fasteners go into the trailer...
    view full answer...
  • Best Method of Attaching E-Track
    You can mount the E-Track Trailer Cargo Control, # EM59150, using wood screws if the mounting surface is wood. If it is sheet metal, I would use sheet metal screws. Basically, match the screw with the material you are mounting to. There is no recommended way of installing the E-Track as installation is the responsibility of each individual installer. The more points you can contact the trailer frame, the more secure the spare tire will be. You might also want to consider using a backing...
    view full answer...
  • Available E-Track Cargo Control Parts for Trailer Use
    If you are referring to E-Track parts like # E19148 and the related accessories shown on the linked page these tracks can be mounted to many different surfaces. The thickness and material of the surface determines the type of hardware to use. We recommend two fasteners per linear foot per side on the track. So for example, a 2-foot length of E-Track # EM59150 would need no less than six fasteners. If you have something else please respond to this email with photos of your load bars and...
    view full answer...


< Previous






  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality e-track for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate e-track information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Kathleen M
Video Edited:
Kathleen M
Employee Chris R
Video Edited:
Chris R
Employee Dustin K
Video by:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Chelsea B
Updated by:
Chelsea B
Employee Mary E
Updated by:
Mary E
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.