Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Circuit tester plugs into your 4-way flat trailer wiring harness and identifies lighting problems. Labeled LED lights illuminate to show which functions are working properly.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey there hollers. Today, we're going to be taking a look at Brophy's LED Circuit Tester. It's available in a 4-pole or 5-pole connection. Before you hit the road with your trailer, we always recommend testing things out to make sure it's working properly. One of the most important things to test out is the lighting so that others know your intentions around you while you're going down the road. Here at etrailer, we recommend testing your light at the source, which is your vehicle.
That's where this Brophy 4-Pole Flat Connector comes in, because when you plug in your trailer and you have a fault on your trailer, you're not going to necessarily know where the fault lies.With our Brophy 4-Pole tester we can eliminate the variable of our trailer and determine whether or not our vehicle side is working. We simply plug it into our 4-pole connection and then we can run through our functions. You'll want to make sure you have your left turn signal, your right turn signal, your tail lights and your brake lights. Now that you know that your vehicle's working properly, if there we're any problems with the lighting on your trailers end, you can isolate it just to your trailer, make those repairs, and then you're ready to hit the road. And that's going to complete our look at Brophy's LED Circuit Tester..
Average Customer Rating: 4.9 out of 5 stars (200 Customer Reviews)
Circuit tester plugs into your 4-way flat trailer wiring harness and identifies lighting problems. Labeled LED lights illuminate to show which functions are working properly.I didn't order this with the trailer hitch and wiring harness, butt then I figured, what the heck. Just tested the stuff I installed and it works. For the record, doing it myself saved me $[XX] off of what Subaru wanted to charge me and the etrailer hitch looks better and had more than double the weight rating (the Crosstrek Sport still has the same engine, though.)
Great peace of mind knowing that my wiring works without having to hook up to a trailer.
This works just as promised and makes checking the wiring connectors much easier.
Ordered hitch receiver with wiring for bike rack installation on 2019 Ford Explorer. Everything arrived in less than a week. Crawled under the car with my burly son and finished the installation in about an hour. Toughest part was getting the exhaust hangers off. Didn't have a tool for that. Online installation video was a big help. Hitch frame rubs against right side exhaust hanger, hence the four star rating instead of five. Exhaust still appears to be level and no weird noises, so not an issue. Get the little plug in light tester. It's worth it, then keep it in the glove box. Haven't purchased bike rack yet, but no concerns about the hitch.
The product had all the necessary instructions and parts to make the installation very easy. The harness is very simple to use.
I bought this at the same time I bought a Hopkins Plug-in Simple Wiring Harness With 4-pole Connector. It worked exactly as advertised and let me test the wiring harness installation in advance of hooking up a trailer. Both products are excellent, and the folks at etrailer exceeded my expectations in all areas, particularly the very fast response to my order.
Chris
4/16/2020
Still working great and very helpful to make sure all is well with the wiring harness in the truck. Definitely still recommend.
Worked as expected, and I appreciate that each lamp is clearly labeled with permanent raised lettering.
Overall a great product. Served it's purpose. Only reason I purchased was because I didn't have a trailer immediately available to test the electrical wiring I installed on the vehicle. If you have a trailer, I wouldn't bother spending the money on this, but for those like me that didn't have a trailer at the time, definitely a must-buy. Easy to use, and can help troubleshoot any issues you may have with your wiring.
This was a relatively simple and straightforward installation on my 2019 Volvo XC40. The directions were clear, although the black and white pics can be a bit hard to follow. I would add the following points. First, the left plastic rail in the spare tire compartment needs to be removed, and it has an odd hook at the front that is a challenge. It will come with some wiggling. It's equally challenging to put back on. Second, I used the Volvo ground terminal to ground the T-One module. Third, I ran the wire from the module to the positive terminal down through a grommet in the spare tire compartment, then along the brake lines under the car to the battery. This was easy to do with the vehicle on a hoist, but will be more challenging if you don't have access to a hoist. I removed 2 of the protective panels under the car to route the wire. It was fairly straightforward. The product works as advertised and fits very well in the car.
Grounding issues are always a problem with trailer lighting (in my experience), and it is great that there is a product specifically intended to provide grounding continuity from the light itself to the tow vehicles wiring. Too many systems rely on a short pigtail attached directly to the trailer and a connection at the trailer ball.
I am hopeful that this will be a long-term solution.
Works great, a lot quicker than a multimeter. And not very expensive.
Easy tester for trailer wiring harness. Made it easy to check as I installed new wiring harness and ran wires - to double check all worked before putting all the trim back in place.
This tester is simple and easy to use and a great way to do a quick check of your trailer plug.
Works exactly as expected.
Worked great
This is a keeper everyone with a trailer wiring harness needs to purchase yes
Great product at a good price and shipped extremely fast!
Once I had the harness installed. It was great to plug the tester in and check my work. I would highly recommend this tool.
Andrew
9/6/2021
Well, Ive had this little tool for a year. Now I dont use it very much, but I recently noticed my trailer lights werent working when I plugged them into my truck. The tester helped troubleshoot the problem quickly and I was back in business. So again I work recommend buying this tool and keep it in your towing vehicle. You never know when it will come in handy.
Etrailer equipment is easy to install and gives a finished custom look. They provide instructions, videos, and guidance throughout the process, so making a mistake is nearly impossible. The performance and quality of the equipment is unequaled and function is flawless. I rarely bother with reviews, but they are deserving of my time, and potential customers should know they can't go wrong shopping here!
Great product to be able to test your electrical install before you close it all up and try to hook up a trailer and cross you figures it was done correctly. I was able to install my own wiring harness and use this tester to make sure everything was good. Well worth the extra few dollars.
Product was easy to install as shown in the videos. For my XTerra the connection into the wiring harness was hard to find. Recommend getting the tester to assure you have a good working connection and can prove you are generating voltage for the indicators, taillights, and brake lights.
Easy. Simple. Anybody with no electrical knowledge can use this! I would suggest
using this to test the functions (as shown in the video) immediately after attaching the plug-in harness and before you put all the pieces of trim back in place. Gotta make sure it works beforehand!
Perfect tool for testing the wiring. Narrowed it down to the trailer lights. Already order a kit from e-trailer.
Works great and totally handy
Everything was as expected, wiring was plug n play and didn't take long at all to hook up ,
Thanks etrailer
Do you have a question about this Electrical Tool?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John
7/20/2023
This product has performed well over the past year.