Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
16-5/8" Wide x 7-5/8" tall x 3/4" deep, efficient, tube-and-fin cooler core comes with a sandwich adapter and all necessary installation hardware, making it easy to prolong the life of your engine and improve its overall performance.
Features:
Specs:
Perhaps the simplest type of heat exchanger, the tube-fin effectively cools a variety of automotive systems. The concept is simple: Fluid cools as it travels through the core by transferring heat out to the fins. The fins then provide the surface area necessary for sufficient heat exchange to take place, allowing the heat pulled from the fluid to dissipate into the surrounding air. The result is longer-lasting oil and a better-functioning engine.
The sandwich adapter in this kit provides the external oil lines necessary to install a cooler without requiring you to move the factory spin-on oil filter, making it even easier to extend the life of your vehicle's engine. In addition, the thermostatic bypass feature allows oil cooler than 180 degrees to bypass the heat exchanger, so your engine will warm up faster.
Average Customer Rating: 4.4 out of 5 stars (20 Customer Reviews)
16-5/8" Wide x 7-5/8" tall x 3/4" deep, efficient, tube-and-fin cooler core comes with a sandwich adapter and all necessary installation hardware, making it easy to prolong the life of your engine and improve its overall performance.Installed this product on my 2013 Ram 5.7 Hemi. Install was simple and straight forward. I hoped there would be improvements in the operating temperature of my engine oil, which there was. Now towing my trailer is no worry about engine oil temp. This cooler works exactly as advertised, and the temp never go above 220. An unexpected result was better gas mileage by almost 2 additional miles per gallon. Also the truck runs much quieter than before and smoother. This noticed by my wife who rides with me always. So I would defiantly call this a win win install and purchase.
I purchased this kit 1 year ago for an 08 Toyota Highlander V6 Sport. The vehicle had a small (and I mean small) trans cooler already installed with the sport, but adding this additional cooler gives us the piece of mind an confidence that when either towing or evening just sitting in temps up to 116F at the drive through in SoCal during summer hours, my family will stay cool. The fans run less and the whole vehicle runs a bit cooler as well. I have verified this with 3rd party OBD readers, actively watching oil temps both at normal operating temps, hill climbs, towing, and when sitting in extreme heat. IT DOESNT BUDGE! I dont have enough good things to say about this cooler. If youve ever thought about it, you should do it. Very easy to install and it flat out works.
It doesn't fit my car even though the website said it would. I had already installed the radiator component before i found the filter adapter didn't fit so i couldn't return the product.
Katrina B.
5/31/2022
This is a universal kit, so there is no guarantee whether it will fit your application. In order for us to assist you, we need pictures and to know what made the adapter not fit.
Great product. Easy installation.
Easy to install but make sure you use quality thread tape. Check for leakage after 300 miles of driving. Then check again.
Bill is very knowledgeable and answered all my questions. Good fella, I can't comment on the product yet because I haven't installed it yet. Thanks Jesse
Doesn't take long to install.
It has been 1 year now. Here is the story.
Dodge Ram 1500 5.7 w/3.92 gears.
Oil temp at speed with no trailer: 224
Oil temp at speed with Springdale Mini RV: 240 (backed off at that point….it would have kept climbing)
After the install:
Oil temp at speed with no trailer: 200ish.
With trailer 210-220
Before I did this, I had to keep it at 55 in the expressway to keep my oil from turning into charcoal. Now I can drive normally. Only at the hottest part of the summer on a long grade did I ever brake 230 and it cooled right back off at the top of the hill.
Also holds about another quart of fluid which I like from a wear/tear perspective.
Even if the temp wasn’t an issue this kit would be worth it to move the oil filter to a non-retarded spot. I opted to go with the frame on the right side. Can change filter from side if wheel is turned. Very nice.
My vehicle is a 2010 Ram 1500 5.7 Hemi 4x4. Overall product is great, those Conti hoses are awesome and little hard to get on lol but only issue I had I couldn’t retain my factory mopar oil filter which isn’t a big deal I got a WIX filter that fit. Thanks for quick shipping and great product! Will be buying a transmission cooler from you soon!
Installed this on my 2012 Jeep Grand Cherokee overland with the hemi as the oil temp was heating up while towing. The install was not fun as I had to remove the front fender, grill and under body shield. Had to relocate oil filter to driver side and as a result, ran out of hose and had go out to buy more. Wish there was a few more feet. I placed oil cooler in front of radiator.
Once installed, oil cooler has worked great as I regularly go off-roading and camping towing a 6k pound trailer. Oil temps stay 20-30 degrees cooler making a huge difference when towing. No issues with the oil cooler after a year of use. Has been a great product, I would recommend it.
This is a quality product and performs great. Installed on a 2012 Toyota Tacoma and had to have some machine work accomplished and a change from the original oil filter. Installation was straight forward after those issues were resolved.
To start I gave the product a good rating only because the kit put together by Derale came with the wrong barb fittings. I called Derale directly and they sent out the right fittings. I have not installed the kit yet but it is well made in the USA. If the kit would of came with the proper barb fitting definitely would of got a excellent rating.
Happy to find a system with the adapter. Mounted to my 4runner very easily. Not much confidence in the plastic mounting method will make something else.
Product was exactly as advertised. Product was shipped quickly, very happy with service.
Recieved item on time, great quality.
Do you have a question about this Engine Oil Cooler?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ed S.
6/20/2017
This upgrade to my Ram has paid for itself after one year of use by extending the oil life thus reducing oil change interval