Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We highly recommend this fuse bypass switch if you need to deactivate a fuse when you flat tow. It's a huge pain to pull the fuse by hand every time, and you risk losing or damaging it. With this kit, you just have to flip a switch.
Features:
Note: Consult your owner's manual to determine which fuse to pull.
Technically, it is optional, but if you need to pull a fuse on your vehicle when you flat tow, this kit will make your life so much easier. Instead of popping the hood and fishing a tiny fuse out of your battery compartment every time you flat tow (not to mention putting it back again), you can just flip a switch. No dead battery, no lost fuse, no damaged fuse, no headache.
When the switch is in the drive position, the fuse will be active and your car will function normally. When you're ready to flat tow, you'll flip the switch to the tow setting and deactivate the fuse. This allows you to tow your vehicle without the battery draining.
Average Customer Rating: 4.7 out of 5 stars (336 Customer Reviews)
We highly recommend this fuse bypass switch if you need to deactivate a fuse when you flat tow. It's a huge pain to pull the fuse by hand every time, and you risk losing or damaging it. With this kit, you just have to flip a switch.I ordered one of these and had it installed by one of the providers suggested by etrailer.com. It didn't work but I can't get a refund since too much time had passed between the time that I ordered and the time I had it installed. I could order a second one though and try to replace possibly defective parts in the first and could return the second for a refund. However, the second one doesn't work either. The tech talked with Roadmaster and they were stumped as to the issue too. Roadmaster is going to send yet a third bypass switch directly to shop to see if this one will work. Basically, I am out of a whole bunch of money and still do not have a fuse bypass. I should have just kept pulling the fuse manually as I had been doing!
Nothing buy trouble. Poor engineering on my 2013 Equinox model. Might be fine for others. It did not isolate the parasitic power drain, even with a 12 volt power supply from the RV.
Roadmaster made sure I had the right part for my car , they also out fitted many years ago my 2013 Equinox with everything I needed for towing behind my RV. Thanks Roadmaster
As always great help fast delivery and a wonderful staff!
Good instructions and easy to instal tnx to Lori AB for putting my order together
It would be nice if you could send directions in written form,I have not used it due to lack of written directions,
The product was ok other than the switch. It is hard to tell if it is on or off. I wound up just using the fuse holder as it is easier to pull the fuse out. Other than that was great service.
Ordered and install base plate over a year ago and finally got to use it a couple of weeks ago because motorhome was in shop waiting on parts. Pandemic and supply chain issues. Anyway, the base plate and accessories work great. Dinghy tracks well. Hardly know it’s back there.
Installed as per installation video and all went great.
Greg
4/25/2022
Towed over 7000km last year with no problems. It is great to not have to pull fuses anymore.
Does what it is intended to do. Took a little time to install but it came with all the instructions I required, and it all looks and works great!
The connections at the fuse panel were difficult to tell which was hot.
Sierra K.
7/19/2022
The instructions say the thick black wire is the cold side and the large red wire is the hot.
Easy enough to install on 2010 Chevy Equinox LT. Very clear directions and video was very helpful. (Thanks etrailer for all the good videos) Have not towed yet but seems to be exactly what I need. Much better than pulling fuses.
This has saved us so much time! Popping the hood and physically pulling the fuses on our vehicle every time we stop gets old quickly. This system was easy to install with the step-by-step video and works flawlessly.
The best customer service from Melissa, and her manager. Delivery and follow up was the best as always. Will continue to purchase from etrailer in the future.This is the way all companies should conduct business.
Good quality, complete kit, fairly easy to install once you watch the videos
Better than opening the hood every time we tow.
Works great and allows me to tow with vehicle stability turned on; no more death wobble! Installation instructions were clear and it fit perfectly.
Right part at the right price.Fast and helpful employees.
Wire kit has been working good for a year now.
The knowledge the staff that worked there was very helpful when purchasing the right product we needed. Thank you
Ordered Friday and arrived Monday. Terrific. Taking to installer today. Thanks
Product works well and as intended.
It has worked great!!
Works great.
Do you have a question about this Flat Tow Wiring Harnes?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Victoria H.
12/3/2024
Hi Scott, the FuseMaster will only remove the need to unplug and reinsert your fuse for flat towing. If you have a 4-cylinder, you will need to leave fuse DLIS #32 intact and pull the ABS module fuse located under the hood. Please note, due to manufacturing variances some 4-cylinder models may label the ABS module fuse as #15 or #16. You will also need to install a charge wire kit, # RM-156-25. This information is current as of November 20, 2017. Contact the vehicle manufacturer for further updates.